| 1 |
|
| 2 |
# Copyright (c) 2021-2025, PostgreSQL Global Development Group |
| 3 |
|
| 4 |
# Tests dedicated to two-phase commit in recovery |
| 5 |
use strict; |
| 6 |
use warnings FATAL => 'all'; |
| 7 |
|
| 8 |
use PostgreSQL::Test::Cluster; |
| 9 |
use PostgreSQL::Test::Utils; |
| 10 |
use Test::More; |
| 11 |
|
| 12 |
my $psql_out = ''; |
| 13 |
my $psql_rc = ''; |
| 14 |
|
| 15 |
sub configure_and_reload |
| 16 |
{ |
| 17 |
local $Test::Builder::Level = $Test::Builder::Level + 1; |
| 18 |
|
| 19 |
my ($node, $parameter) = @_; |
| 20 |
my $name = $node->name; |
| 21 |
|
| 22 |
$node->append_conf( |
| 23 |
'postgresql.conf', qq( |
| 24 |
$parameter |
| 25 |
)); |
| 26 |
$node->psql('postgres', "SELECT pg_reload_conf()", stdout => \$psql_out); |
| 27 |
is($psql_out, 't', "reload node $name with $parameter"); |
| 28 |
return; |
| 29 |
} |
| 30 |
|
| 31 |
# Set up two nodes, which will alternately be primary and replication standby. |
| 32 |
|
| 33 |
# Setup london node |
| 34 |
my $node_london = PostgreSQL::Test::Cluster->new("london"); |
| 35 |
$node_london->init(allows_streaming => 1); |
| 36 |
$node_london->append_conf( |
| 37 |
'postgresql.conf', qq( |
| 38 |
max_prepared_transactions = 10 |
| 39 |
log_checkpoints = true |
| 40 |
)); |
| 41 |
$node_london->start; |
| 42 |
$node_london->backup('london_backup'); |
| 43 |
|
| 44 |
# Setup paris node |
| 45 |
my $node_paris = PostgreSQL::Test::Cluster->new('paris'); |
| 46 |
$node_paris->init_from_backup($node_london, 'london_backup', |
| 47 |
has_streaming => 1); |
| 48 |
$node_paris->append_conf( |
| 49 |
'postgresql.conf', qq( |
| 50 |
subtransaction_buffers = 32 |
| 51 |
)); |
| 52 |
$node_paris->start; |
| 53 |
|
| 54 |
# Switch to synchronous replication in both directions |
| 55 |
configure_and_reload($node_london, "synchronous_standby_names = 'paris'"); |
| 56 |
configure_and_reload($node_paris, "synchronous_standby_names = 'london'"); |
| 57 |
|
| 58 |
# Set up nonce names for current primary and standby nodes |
| 59 |
note "Initially, london is primary and paris is standby"; |
| 60 |
my ($cur_primary, $cur_standby) = ($node_london, $node_paris); |
| 61 |
my $cur_primary_name = $cur_primary->name; |
| 62 |
|
| 63 |
# Create table we'll use in the test transactions |
| 64 |
$cur_primary->psql('postgres', "CREATE TABLE t_009_tbl (id int, msg text)"); |
| 65 |
|
| 66 |
############################################################################### |
| 67 |
# Check that we can commit and abort transaction after soft restart. |
| 68 |
# Here checkpoint happens before shutdown and no WAL replay will occur at next |
| 69 |
# startup. In this case postgres re-creates shared-memory state from twophase |
| 70 |
# files. |
| 71 |
############################################################################### |
| 72 |
|
| 73 |
$cur_primary->psql( |
| 74 |
'postgres', " |
| 75 |
BEGIN; |
| 76 |
INSERT INTO t_009_tbl VALUES (1, 'issued to ${cur_primary_name}'); |
| 77 |
SAVEPOINT s1; |
| 78 |
INSERT INTO t_009_tbl VALUES (2, 'issued to ${cur_primary_name}'); |
| 79 |
PREPARE TRANSACTION 'xact_009_1'; |
| 80 |
BEGIN; |
| 81 |
INSERT INTO t_009_tbl VALUES (3, 'issued to ${cur_primary_name}'); |
| 82 |
SAVEPOINT s1; |
| 83 |
INSERT INTO t_009_tbl VALUES (4, 'issued to ${cur_primary_name}'); |
| 84 |
PREPARE TRANSACTION 'xact_009_2';"); |
| 85 |
$cur_primary->stop; |
| 86 |
$cur_primary->start; |
| 87 |
|
| 88 |
$psql_rc = $cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_1'"); |
| 89 |
is($psql_rc, '0', 'Commit prepared transaction after restart'); |
| 90 |
|
| 91 |
$psql_rc = $cur_primary->psql('postgres', "ROLLBACK PREPARED 'xact_009_2'"); |
| 92 |
is($psql_rc, '0', 'Rollback prepared transaction after restart'); |
| 93 |
|
| 94 |
############################################################################### |
| 95 |
# Check that we can commit and abort after a hard restart. |
| 96 |
# At next startup, WAL replay will re-create shared memory state for prepared |
| 97 |
# transaction using dedicated WAL records. |
| 98 |
############################################################################### |
| 99 |
|
| 100 |
$cur_primary->psql( |
| 101 |
'postgres', " |
| 102 |
CHECKPOINT; |
| 103 |
BEGIN; |
| 104 |
INSERT INTO t_009_tbl VALUES (5, 'issued to ${cur_primary_name}'); |
| 105 |
SAVEPOINT s1; |
| 106 |
INSERT INTO t_009_tbl VALUES (6, 'issued to ${cur_primary_name}'); |
| 107 |
PREPARE TRANSACTION 'xact_009_3'; |
| 108 |
BEGIN; |
| 109 |
INSERT INTO t_009_tbl VALUES (7, 'issued to ${cur_primary_name}'); |
| 110 |
SAVEPOINT s1; |
| 111 |
INSERT INTO t_009_tbl VALUES (8, 'issued to ${cur_primary_name}'); |
| 112 |
PREPARE TRANSACTION 'xact_009_4';"); |
| 113 |
$cur_primary->teardown_node; |
| 114 |
$cur_primary->start; |
| 115 |
|
| 116 |
$psql_rc = $cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_3'"); |
| 117 |
is($psql_rc, '0', 'Commit prepared transaction after teardown'); |
| 118 |
|
| 119 |
$psql_rc = $cur_primary->psql('postgres', "ROLLBACK PREPARED 'xact_009_4'"); |
| 120 |
is($psql_rc, '0', 'Rollback prepared transaction after teardown'); |
| 121 |
|
| 122 |
############################################################################### |
| 123 |
# Check that WAL replay can handle several transactions with same GID name. |
| 124 |
############################################################################### |
| 125 |
|
| 126 |
$cur_primary->psql( |
| 127 |
'postgres', " |
| 128 |
CHECKPOINT; |
| 129 |
BEGIN; |
| 130 |
INSERT INTO t_009_tbl VALUES (9, 'issued to ${cur_primary_name}'); |
| 131 |
SAVEPOINT s1; |
| 132 |
INSERT INTO t_009_tbl VALUES (10, 'issued to ${cur_primary_name}'); |
| 133 |
PREPARE TRANSACTION 'xact_009_5'; |
| 134 |
COMMIT PREPARED 'xact_009_5'; |
| 135 |
BEGIN; |
| 136 |
INSERT INTO t_009_tbl VALUES (11, 'issued to ${cur_primary_name}'); |
| 137 |
SAVEPOINT s1; |
| 138 |
INSERT INTO t_009_tbl VALUES (12, 'issued to ${cur_primary_name}'); |
| 139 |
PREPARE TRANSACTION 'xact_009_5';"); |
| 140 |
$cur_primary->teardown_node; |
| 141 |
$cur_primary->start; |
| 142 |
|
| 143 |
$psql_rc = $cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_5'"); |
| 144 |
is($psql_rc, '0', 'Replay several transactions with same GID'); |
| 145 |
|
| 146 |
############################################################################### |
| 147 |
# Check that WAL replay cleans up its shared memory state and releases locks |
| 148 |
# while replaying transaction commits. |
| 149 |
############################################################################### |
| 150 |
|
| 151 |
$cur_primary->psql( |
| 152 |
'postgres', " |
| 153 |
BEGIN; |
| 154 |
INSERT INTO t_009_tbl VALUES (13, 'issued to ${cur_primary_name}'); |
| 155 |
SAVEPOINT s1; |
| 156 |
INSERT INTO t_009_tbl VALUES (14, 'issued to ${cur_primary_name}'); |
| 157 |
PREPARE TRANSACTION 'xact_009_6'; |
| 158 |
COMMIT PREPARED 'xact_009_6';"); |
| 159 |
$cur_primary->teardown_node; |
| 160 |
$cur_primary->start; |
| 161 |
$psql_rc = $cur_primary->psql( |
| 162 |
'postgres', " |
| 163 |
BEGIN; |
| 164 |
INSERT INTO t_009_tbl VALUES (15, 'issued to ${cur_primary_name}'); |
| 165 |
SAVEPOINT s1; |
| 166 |
INSERT INTO t_009_tbl VALUES (16, 'issued to ${cur_primary_name}'); |
| 167 |
-- This prepare can fail due to conflicting GID or locks conflicts if |
| 168 |
-- replay did not fully cleanup its state on previous commit. |
| 169 |
PREPARE TRANSACTION 'xact_009_7';"); |
| 170 |
is($psql_rc, '0', "Cleanup of shared memory state for 2PC commit"); |
| 171 |
|
| 172 |
$cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_7'"); |
| 173 |
|
| 174 |
############################################################################### |
| 175 |
# Check that WAL replay will cleanup its shared memory state on running standby. |
| 176 |
############################################################################### |
| 177 |
|
| 178 |
$cur_primary->psql( |
| 179 |
'postgres', " |
| 180 |
BEGIN; |
| 181 |
INSERT INTO t_009_tbl VALUES (17, 'issued to ${cur_primary_name}'); |
| 182 |
SAVEPOINT s1; |
| 183 |
INSERT INTO t_009_tbl VALUES (18, 'issued to ${cur_primary_name}'); |
| 184 |
PREPARE TRANSACTION 'xact_009_8'; |
| 185 |
COMMIT PREPARED 'xact_009_8';"); |
| 186 |
$cur_standby->psql( |
| 187 |
'postgres', |
| 188 |
"SELECT count(*) FROM pg_prepared_xacts", |
| 189 |
stdout => \$psql_out); |
| 190 |
is($psql_out, '0', |
| 191 |
"Cleanup of shared memory state on running standby without checkpoint"); |
| 192 |
|
| 193 |
############################################################################### |
| 194 |
# Same as in previous case, but let's force checkpoint on standby between |
| 195 |
# prepare and commit to use on-disk twophase files. |
| 196 |
############################################################################### |
| 197 |
|
| 198 |
$cur_primary->psql( |
| 199 |
'postgres', " |
| 200 |
BEGIN; |
| 201 |
INSERT INTO t_009_tbl VALUES (19, 'issued to ${cur_primary_name}'); |
| 202 |
SAVEPOINT s1; |
| 203 |
INSERT INTO t_009_tbl VALUES (20, 'issued to ${cur_primary_name}'); |
| 204 |
PREPARE TRANSACTION 'xact_009_9';"); |
| 205 |
$cur_standby->psql('postgres', "CHECKPOINT"); |
| 206 |
$cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_9'"); |
| 207 |
$cur_standby->psql( |
| 208 |
'postgres', |
| 209 |
"SELECT count(*) FROM pg_prepared_xacts", |
| 210 |
stdout => \$psql_out); |
| 211 |
is($psql_out, '0', |
| 212 |
"Cleanup of shared memory state on running standby after checkpoint"); |
| 213 |
|
| 214 |
############################################################################### |
| 215 |
# Check that prepared transactions can be committed on promoted standby. |
| 216 |
############################################################################### |
| 217 |
|
| 218 |
$cur_primary->psql( |
| 219 |
'postgres', " |
| 220 |
BEGIN; |
| 221 |
INSERT INTO t_009_tbl VALUES (21, 'issued to ${cur_primary_name}'); |
| 222 |
SAVEPOINT s1; |
| 223 |
INSERT INTO t_009_tbl VALUES (22, 'issued to ${cur_primary_name}'); |
| 224 |
PREPARE TRANSACTION 'xact_009_10';"); |
| 225 |
$cur_primary->stop; |
| 226 |
$cur_standby->promote; |
| 227 |
|
| 228 |
# change roles |
| 229 |
note "Now paris is primary and london is standby"; |
| 230 |
($cur_primary, $cur_standby) = ($node_paris, $node_london); |
| 231 |
$cur_primary_name = $cur_primary->name; |
| 232 |
|
| 233 |
# because london is not running at this point, we can't use syncrep commit |
| 234 |
# on this command |
| 235 |
$psql_rc = $cur_primary->psql('postgres', |
| 236 |
"SET synchronous_commit = off; COMMIT PREPARED 'xact_009_10'"); |
| 237 |
is($psql_rc, '0', "Restore of prepared transaction on promoted standby"); |
| 238 |
|
| 239 |
# restart old primary as new standby |
| 240 |
$cur_standby->enable_streaming($cur_primary); |
| 241 |
$cur_standby->start; |
| 242 |
|
| 243 |
############################################################################### |
| 244 |
# Check that prepared transactions are replayed after soft restart of standby |
| 245 |
# while primary is down. Since standby knows that primary is down it uses a |
| 246 |
# different code path on startup to ensure that the status of transactions is |
| 247 |
# consistent. |
| 248 |
############################################################################### |
| 249 |
|
| 250 |
$cur_primary->psql( |
| 251 |
'postgres', " |
| 252 |
BEGIN; |
| 253 |
INSERT INTO t_009_tbl VALUES (23, 'issued to ${cur_primary_name}'); |
| 254 |
SAVEPOINT s1; |
| 255 |
INSERT INTO t_009_tbl VALUES (24, 'issued to ${cur_primary_name}'); |
| 256 |
PREPARE TRANSACTION 'xact_009_11';"); |
| 257 |
$cur_primary->stop; |
| 258 |
$cur_standby->restart; |
| 259 |
$cur_standby->promote; |
| 260 |
|
| 261 |
# change roles |
| 262 |
note "Now london is primary and paris is standby"; |
| 263 |
($cur_primary, $cur_standby) = ($node_london, $node_paris); |
| 264 |
$cur_primary_name = $cur_primary->name; |
| 265 |
|
| 266 |
$cur_primary->psql( |
| 267 |
'postgres', |
| 268 |
"SELECT count(*) FROM pg_prepared_xacts", |
| 269 |
stdout => \$psql_out); |
| 270 |
is($psql_out, '1', |
| 271 |
"Restore prepared transactions from files with primary down"); |
| 272 |
|
| 273 |
# restart old primary as new standby |
| 274 |
$cur_standby->enable_streaming($cur_primary); |
| 275 |
$cur_standby->start; |
| 276 |
|
| 277 |
$cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_11'"); |
| 278 |
|
| 279 |
############################################################################### |
| 280 |
# Check that prepared transactions are correctly replayed after standby hard |
| 281 |
# restart while primary is down. |
| 282 |
############################################################################### |
| 283 |
|
| 284 |
$cur_primary->psql( |
| 285 |
'postgres', " |
| 286 |
BEGIN; |
| 287 |
INSERT INTO t_009_tbl VALUES (25, 'issued to ${cur_primary_name}'); |
| 288 |
SAVEPOINT s1; |
| 289 |
INSERT INTO t_009_tbl VALUES (26, 'issued to ${cur_primary_name}'); |
| 290 |
PREPARE TRANSACTION 'xact_009_12'; |
| 291 |
"); |
| 292 |
$cur_primary->stop; |
| 293 |
$cur_standby->teardown_node; |
| 294 |
$cur_standby->start; |
| 295 |
$cur_standby->promote; |
| 296 |
|
| 297 |
# change roles |
| 298 |
note "Now paris is primary and london is standby"; |
| 299 |
($cur_primary, $cur_standby) = ($node_paris, $node_london); |
| 300 |
$cur_primary_name = $cur_primary->name; |
| 301 |
|
| 302 |
$cur_primary->psql( |
| 303 |
'postgres', |
| 304 |
"SELECT count(*) FROM pg_prepared_xacts", |
| 305 |
stdout => \$psql_out); |
| 306 |
is($psql_out, '1', |
| 307 |
"Restore prepared transactions from records with primary down"); |
| 308 |
|
| 309 |
# restart old primary as new standby |
| 310 |
$cur_standby->enable_streaming($cur_primary); |
| 311 |
$cur_standby->start; |
| 312 |
|
| 313 |
$cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_12'"); |
| 314 |
|
| 315 |
############################################################################### |
| 316 |
# Check visibility of prepared transactions in standby after a restart while |
| 317 |
# primary is down. |
| 318 |
############################################################################### |
| 319 |
|
| 320 |
$cur_primary->psql( |
| 321 |
'postgres', " |
| 322 |
SET synchronous_commit='remote_apply'; -- To ensure the standby is caught up |
| 323 |
CREATE TABLE t_009_tbl_standby_mvcc (id int, msg text); |
| 324 |
BEGIN; |
| 325 |
INSERT INTO t_009_tbl_standby_mvcc VALUES (1, 'issued to ${cur_primary_name}'); |
| 326 |
SAVEPOINT s1; |
| 327 |
INSERT INTO t_009_tbl_standby_mvcc VALUES (2, 'issued to ${cur_primary_name}'); |
| 328 |
PREPARE TRANSACTION 'xact_009_standby_mvcc'; |
| 329 |
"); |
| 330 |
$cur_primary->stop; |
| 331 |
$cur_standby->restart; |
| 332 |
|
| 333 |
# Acquire a snapshot in standby, before we commit the prepared transaction |
| 334 |
my $standby_session = |
| 335 |
$cur_standby->background_psql('postgres', on_error_die => 1); |
| 336 |
$standby_session->query_safe("BEGIN ISOLATION LEVEL REPEATABLE READ"); |
| 337 |
$psql_out = |
| 338 |
$standby_session->query_safe("SELECT count(*) FROM t_009_tbl_standby_mvcc"); |
| 339 |
is($psql_out, '0', |
| 340 |
"Prepared transaction not visible in standby before commit"); |
| 341 |
|
| 342 |
# Commit the transaction in primary |
| 343 |
$cur_primary->start; |
| 344 |
$cur_primary->psql( |
| 345 |
'postgres', " |
| 346 |
SET synchronous_commit='remote_apply'; -- To ensure the standby is caught up |
| 347 |
COMMIT PREPARED 'xact_009_standby_mvcc'; |
| 348 |
"); |
| 349 |
|
| 350 |
# Still not visible to the old snapshot |
| 351 |
$psql_out = |
| 352 |
$standby_session->query_safe("SELECT count(*) FROM t_009_tbl_standby_mvcc"); |
| 353 |
is($psql_out, '0', |
| 354 |
"Committed prepared transaction not visible to old snapshot in standby"); |
| 355 |
|
| 356 |
# Is visible to a new snapshot |
| 357 |
$standby_session->query_safe("COMMIT"); |
| 358 |
$psql_out = |
| 359 |
$standby_session->query_safe("SELECT count(*) FROM t_009_tbl_standby_mvcc"); |
| 360 |
is($psql_out, '2', |
| 361 |
"Committed prepared transaction is visible to new snapshot in standby"); |
| 362 |
$standby_session->quit; |
| 363 |
|
| 364 |
############################################################################### |
| 365 |
# Check for a lock conflict between prepared transaction with DDL inside and |
| 366 |
# replay of XLOG_STANDBY_LOCK wal record. |
| 367 |
############################################################################### |
| 368 |
|
| 369 |
$cur_primary->psql( |
| 370 |
'postgres', " |
| 371 |
BEGIN; |
| 372 |
CREATE TABLE t_009_tbl2 (id int, msg text); |
| 373 |
SAVEPOINT s1; |
| 374 |
INSERT INTO t_009_tbl2 VALUES (27, 'issued to ${cur_primary_name}'); |
| 375 |
PREPARE TRANSACTION 'xact_009_13'; |
| 376 |
-- checkpoint will issue XLOG_STANDBY_LOCK that can conflict with lock |
| 377 |
-- held by 'create table' statement |
| 378 |
CHECKPOINT; |
| 379 |
COMMIT PREPARED 'xact_009_13';"); |
| 380 |
|
| 381 |
# Ensure that last transaction is replayed on standby. |
| 382 |
my $cur_primary_lsn = |
| 383 |
$cur_primary->safe_psql('postgres', "SELECT pg_current_wal_lsn()"); |
| 384 |
my $caughtup_query = |
| 385 |
"SELECT '$cur_primary_lsn'::pg_lsn <= pg_last_wal_replay_lsn()"; |
| 386 |
$cur_standby->poll_query_until('postgres', $caughtup_query) |
| 387 |
or die "Timed out while waiting for standby to catch up"; |
| 388 |
|
| 389 |
$cur_standby->psql( |
| 390 |
'postgres', |
| 391 |
"SELECT count(*) FROM t_009_tbl2", |
| 392 |
stdout => \$psql_out); |
| 393 |
is($psql_out, '1', "Replay prepared transaction with DDL"); |
| 394 |
|
| 395 |
############################################################################### |
| 396 |
# Check recovery of prepared transaction with DDL inside after a hard restart |
| 397 |
# of the primary. |
| 398 |
############################################################################### |
| 399 |
|
| 400 |
$cur_primary->psql( |
| 401 |
'postgres', " |
| 402 |
BEGIN; |
| 403 |
CREATE TABLE t_009_tbl3 (id int, msg text); |
| 404 |
SAVEPOINT s1; |
| 405 |
INSERT INTO t_009_tbl3 VALUES (28, 'issued to ${cur_primary_name}'); |
| 406 |
PREPARE TRANSACTION 'xact_009_14'; |
| 407 |
BEGIN; |
| 408 |
CREATE TABLE t_009_tbl4 (id int, msg text); |
| 409 |
SAVEPOINT s1; |
| 410 |
INSERT INTO t_009_tbl4 VALUES (29, 'issued to ${cur_primary_name}'); |
| 411 |
PREPARE TRANSACTION 'xact_009_15';"); |
| 412 |
|
| 413 |
$cur_primary->teardown_node; |
| 414 |
$cur_primary->start; |
| 415 |
|
| 416 |
$psql_rc = $cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_14'"); |
| 417 |
is($psql_rc, '0', 'Commit prepared transaction after teardown'); |
| 418 |
|
| 419 |
$psql_rc = $cur_primary->psql('postgres', "ROLLBACK PREPARED 'xact_009_15'"); |
| 420 |
is($psql_rc, '0', 'Rollback prepared transaction after teardown'); |
| 421 |
|
| 422 |
############################################################################### |
| 423 |
# Check recovery of prepared transaction with DDL inside after a soft restart |
| 424 |
# of the primary. |
| 425 |
############################################################################### |
| 426 |
|
| 427 |
$cur_primary->psql( |
| 428 |
'postgres', " |
| 429 |
BEGIN; |
| 430 |
CREATE TABLE t_009_tbl5 (id int, msg text); |
| 431 |
SAVEPOINT s1; |
| 432 |
INSERT INTO t_009_tbl5 VALUES (30, 'issued to ${cur_primary_name}'); |
| 433 |
PREPARE TRANSACTION 'xact_009_16'; |
| 434 |
BEGIN; |
| 435 |
CREATE TABLE t_009_tbl6 (id int, msg text); |
| 436 |
SAVEPOINT s1; |
| 437 |
INSERT INTO t_009_tbl6 VALUES (31, 'issued to ${cur_primary_name}'); |
| 438 |
PREPARE TRANSACTION 'xact_009_17';"); |
| 439 |
|
| 440 |
$cur_primary->stop; |
| 441 |
$cur_primary->start; |
| 442 |
|
| 443 |
$psql_rc = $cur_primary->psql('postgres', "COMMIT PREPARED 'xact_009_16'"); |
| 444 |
is($psql_rc, '0', 'Commit prepared transaction after restart'); |
| 445 |
|
| 446 |
$psql_rc = $cur_primary->psql('postgres', "ROLLBACK PREPARED 'xact_009_17'"); |
| 447 |
is($psql_rc, '0', 'Rollback prepared transaction after restart'); |
| 448 |
|
| 449 |
############################################################################### |
| 450 |
# Verify expected data appears on both servers. |
| 451 |
############################################################################### |
| 452 |
|
| 453 |
$cur_primary->psql( |
| 454 |
'postgres', |
| 455 |
"SELECT count(*) FROM pg_prepared_xacts", |
| 456 |
stdout => \$psql_out); |
| 457 |
is($psql_out, '0', "No uncommitted prepared transactions on primary"); |
| 458 |
|
| 459 |
$cur_primary->psql( |
| 460 |
'postgres', |
| 461 |
"SELECT * FROM t_009_tbl ORDER BY id", |
| 462 |
stdout => \$psql_out); |
| 463 |
is( $psql_out, qq{1|issued to london |
| 464 |
2|issued to london |
| 465 |
5|issued to london |
| 466 |
6|issued to london |
| 467 |
9|issued to london |
| 468 |
10|issued to london |
| 469 |
11|issued to london |
| 470 |
12|issued to london |
| 471 |
13|issued to london |
| 472 |
14|issued to london |
| 473 |
15|issued to london |
| 474 |
16|issued to london |
| 475 |
17|issued to london |
| 476 |
18|issued to london |
| 477 |
19|issued to london |
| 478 |
20|issued to london |
| 479 |
21|issued to london |
| 480 |
22|issued to london |
| 481 |
23|issued to paris |
| 482 |
24|issued to paris |
| 483 |
25|issued to london |
| 484 |
26|issued to london}, |
| 485 |
"Check expected t_009_tbl data on primary"); |
| 486 |
|
| 487 |
$cur_primary->psql( |
| 488 |
'postgres', |
| 489 |
"SELECT * FROM t_009_tbl2", |
| 490 |
stdout => \$psql_out); |
| 491 |
is( $psql_out, |
| 492 |
qq{27|issued to paris}, |
| 493 |
"Check expected t_009_tbl2 data on primary"); |
| 494 |
|
| 495 |
$cur_standby->psql( |
| 496 |
'postgres', |
| 497 |
"SELECT count(*) FROM pg_prepared_xacts", |
| 498 |
stdout => \$psql_out); |
| 499 |
is($psql_out, '0', "No uncommitted prepared transactions on standby"); |
| 500 |
|
| 501 |
$cur_standby->psql( |
| 502 |
'postgres', |
| 503 |
"SELECT * FROM t_009_tbl ORDER BY id", |
| 504 |
stdout => \$psql_out); |
| 505 |
is( $psql_out, qq{1|issued to london |
| 506 |
2|issued to london |
| 507 |
5|issued to london |
| 508 |
6|issued to london |
| 509 |
9|issued to london |
| 510 |
10|issued to london |
| 511 |
11|issued to london |
| 512 |
12|issued to london |
| 513 |
13|issued to london |
| 514 |
14|issued to london |
| 515 |
15|issued to london |
| 516 |
16|issued to london |
| 517 |
17|issued to london |
| 518 |
18|issued to london |
| 519 |
19|issued to london |
| 520 |
20|issued to london |
| 521 |
21|issued to london |
| 522 |
22|issued to london |
| 523 |
23|issued to paris |
| 524 |
24|issued to paris |
| 525 |
25|issued to london |
| 526 |
26|issued to london}, |
| 527 |
"Check expected t_009_tbl data on standby"); |
| 528 |
|
| 529 |
$cur_standby->psql( |
| 530 |
'postgres', |
| 531 |
"SELECT * FROM t_009_tbl2", |
| 532 |
stdout => \$psql_out); |
| 533 |
is( $psql_out, |
| 534 |
qq{27|issued to paris}, |
| 535 |
"Check expected t_009_tbl2 data on standby"); |
| 536 |
|
| 537 |
|
| 538 |
# Exercise the 2PC recovery code in StartupSUBTRANS, which is concerned with |
| 539 |
# ensuring that enough pg_subtrans pages exist on disk to cover the range of |
| 540 |
# prepared transactions at server start time. There's not much we can verify |
| 541 |
# directly, but let's at least get the code to run. |
| 542 |
$cur_standby->stop(); |
| 543 |
configure_and_reload($cur_primary, "synchronous_standby_names = ''"); |
| 544 |
|
| 545 |
$cur_primary->safe_psql('postgres', "CHECKPOINT"); |
| 546 |
|
| 547 |
my $start_lsn = |
| 548 |
$cur_primary->safe_psql('postgres', 'select pg_current_wal_insert_lsn()'); |
| 549 |
$cur_primary->safe_psql('postgres', |
| 550 |
"CREATE TABLE test(); BEGIN; CREATE TABLE test1(); PREPARE TRANSACTION 'foo';" |
| 551 |
); |
| 552 |
my $osubtrans = $cur_primary->safe_psql('postgres', |
| 553 |
"select 'pg_subtrans/'||f, s.size from pg_ls_dir('pg_subtrans') f, pg_stat_file('pg_subtrans/'||f) s" |
| 554 |
); |
| 555 |
$cur_primary->pgbench( |
| 556 |
'--no-vacuum --client=5 --transactions=1000', |
| 557 |
0, |
| 558 |
[], |
| 559 |
[], |
| 560 |
'pgbench run to cause pg_subtrans traffic', |
| 561 |
{ |
| 562 |
'009_twophase.pgb' => 'insert into test default values' |
| 563 |
}); |
| 564 |
# StartupSUBTRANS is exercised with a wide range of visible XIDs in this |
| 565 |
# stop/start sequence, because we left a prepared transaction open above. |
| 566 |
# Also, setting subtransaction_buffers to 32 above causes to switch SLRU |
| 567 |
# bank, for additional code coverage. |
| 568 |
$cur_primary->stop; |
| 569 |
$cur_primary->start; |
| 570 |
my $nsubtrans = $cur_primary->safe_psql('postgres', |
| 571 |
"select 'pg_subtrans/'||f, s.size from pg_ls_dir('pg_subtrans') f, pg_stat_file('pg_subtrans/'||f) s" |
| 572 |
); |
| 573 |
isnt($osubtrans, $nsubtrans, "contents of pg_subtrans/ have changed"); |
| 574 |
|
| 575 |
done_testing(); |