| 1 |
# ----------------------------- |
| 2 |
# PostgreSQL configuration file |
| 3 |
# ----------------------------- |
| 4 |
# |
| 5 |
# This file consists of lines of the form: |
| 6 |
# |
| 7 |
# name = value |
| 8 |
# |
| 9 |
# (The "=" is optional.) Whitespace may be used. Comments are introduced with |
| 10 |
# "#" anywhere on a line. The complete list of parameter names and allowed |
| 11 |
# values can be found in the PostgreSQL documentation. |
| 12 |
# |
| 13 |
# The commented-out settings shown in this file represent the default values. |
| 14 |
# Re-commenting a setting is NOT sufficient to revert it to the default value; |
| 15 |
# you need to reload the server. |
| 16 |
# |
| 17 |
# This file is read on server startup and when the server receives a SIGHUP |
| 18 |
# signal. If you edit the file on a running system, you have to SIGHUP the |
| 19 |
# server for the changes to take effect, run "pg_ctl reload", or execute |
| 20 |
# "SELECT pg_reload_conf()". Some parameters, which are marked below, |
| 21 |
# require a server shutdown and restart to take effect. |
| 22 |
# |
| 23 |
# Any parameter can also be given as a command-line option to the server, e.g., |
| 24 |
# "postgres -c log_connections=all". Some parameters can be changed at run time |
| 25 |
# with the "SET" SQL command. |
| 26 |
# |
| 27 |
# Memory units: B = bytes Time units: us = microseconds |
| 28 |
# kB = kilobytes ms = milliseconds |
| 29 |
# MB = megabytes s = seconds |
| 30 |
# GB = gigabytes min = minutes |
| 31 |
# TB = terabytes h = hours |
| 32 |
# d = days |
| 33 |
|
| 34 |
|
| 35 |
#------------------------------------------------------------------------------ |
| 36 |
# FILE LOCATIONS |
| 37 |
#------------------------------------------------------------------------------ |
| 38 |
|
| 39 |
# The default values of these variables are driven from the -D command-line |
| 40 |
# option or PGDATA environment variable, represented here as ConfigDir. |
| 41 |
|
| 42 |
#data_directory = 'ConfigDir' # use data in another directory |
| 43 |
# (change requires restart) |
| 44 |
#hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file |
| 45 |
# (change requires restart) |
| 46 |
#ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file |
| 47 |
# (change requires restart) |
| 48 |
|
| 49 |
# If external_pid_file is not explicitly set, no extra PID file is written. |
| 50 |
#external_pid_file = '' # write an extra PID file |
| 51 |
# (change requires restart) |
| 52 |
|
| 53 |
|
| 54 |
#------------------------------------------------------------------------------ |
| 55 |
# CONNECTIONS AND AUTHENTICATION |
| 56 |
#------------------------------------------------------------------------------ |
| 57 |
|
| 58 |
# - Connection Settings - |
| 59 |
|
| 60 |
#listen_addresses = 'localhost' # what IP address(es) to listen on; |
| 61 |
# comma-separated list of addresses; |
| 62 |
# defaults to 'localhost'; use '*' for all |
| 63 |
# (change requires restart) |
| 64 |
#port = 5432 # (change requires restart) |
| 65 |
#max_connections = 100 # (change requires restart) |
| 66 |
#reserved_connections = 0 # (change requires restart) |
| 67 |
#superuser_reserved_connections = 3 # (change requires restart) |
| 68 |
#unix_socket_directories = '/tmp' # comma-separated list of directories |
| 69 |
# (change requires restart) |
| 70 |
#unix_socket_group = '' # (change requires restart) |
| 71 |
#unix_socket_permissions = 0777 # begin with 0 to use octal notation |
| 72 |
# (change requires restart) |
| 73 |
#bonjour = off # advertise server via Bonjour |
| 74 |
# (change requires restart) |
| 75 |
#bonjour_name = '' # defaults to the computer name |
| 76 |
# (change requires restart) |
| 77 |
|
| 78 |
# - TCP settings - |
| 79 |
# see "man tcp" for details |
| 80 |
|
| 81 |
#tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; |
| 82 |
# 0 selects the system default |
| 83 |
#tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; |
| 84 |
# 0 selects the system default |
| 85 |
#tcp_keepalives_count = 0 # TCP_KEEPCNT; |
| 86 |
# 0 selects the system default |
| 87 |
#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; |
| 88 |
# 0 selects the system default |
| 89 |
|
| 90 |
#client_connection_check_interval = 0 # time between checks for client |
| 91 |
# disconnection while running queries; |
| 92 |
# 0 for never |
| 93 |
|
| 94 |
# - Authentication - |
| 95 |
|
| 96 |
#authentication_timeout = 1min # 1s-600s |
| 97 |
#password_encryption = scram-sha-256 # scram-sha-256 or (deprecated) md5 |
| 98 |
#scram_iterations = 4096 |
| 99 |
#md5_password_warnings = on # display md5 deprecation warnings? |
| 100 |
#oauth_validator_libraries = '' # comma-separated list of trusted validator modules |
| 101 |
|
| 102 |
# GSSAPI using Kerberos |
| 103 |
#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' |
| 104 |
#krb_caseins_users = off |
| 105 |
#gss_accept_delegation = off |
| 106 |
|
| 107 |
# - SSL - |
| 108 |
|
| 109 |
#ssl = off |
| 110 |
#ssl_ca_file = '' |
| 111 |
#ssl_cert_file = 'server.crt' |
| 112 |
#ssl_crl_file = '' |
| 113 |
#ssl_crl_dir = '' |
| 114 |
#ssl_key_file = 'server.key' |
| 115 |
#ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed TLSv1.2 ciphers |
| 116 |
#ssl_tls13_ciphers = '' # allowed TLSv1.3 cipher suites, blank for default |
| 117 |
#ssl_prefer_server_ciphers = on |
| 118 |
#ssl_groups = 'X25519:prime256v1' |
| 119 |
#ssl_min_protocol_version = 'TLSv1.2' |
| 120 |
#ssl_max_protocol_version = '' |
| 121 |
#ssl_dh_params_file = '' |
| 122 |
#ssl_passphrase_command = '' |
| 123 |
#ssl_passphrase_command_supports_reload = off |
| 124 |
|
| 125 |
|
| 126 |
#------------------------------------------------------------------------------ |
| 127 |
# RESOURCE USAGE (except WAL) |
| 128 |
#------------------------------------------------------------------------------ |
| 129 |
|
| 130 |
# - Memory - |
| 131 |
|
| 132 |
#shared_buffers = 128MB # min 128kB |
| 133 |
# (change requires restart) |
| 134 |
#huge_pages = try # on, off, or try |
| 135 |
# (change requires restart) |
| 136 |
#huge_page_size = 0 # zero for system default |
| 137 |
# (change requires restart) |
| 138 |
#temp_buffers = 8MB # min 800kB |
| 139 |
#max_prepared_transactions = 0 # zero disables the feature |
| 140 |
# (change requires restart) |
| 141 |
# Caution: it is not advisable to set max_prepared_transactions nonzero unless |
| 142 |
# you actively intend to use prepared transactions. |
| 143 |
#work_mem = 4MB # min 64kB |
| 144 |
#hash_mem_multiplier = 2.0 # 1-1000.0 multiplier on hash table work_mem |
| 145 |
#maintenance_work_mem = 64MB # min 64kB |
| 146 |
#autovacuum_work_mem = -1 # min 64kB, or -1 to use maintenance_work_mem |
| 147 |
#logical_decoding_work_mem = 64MB # min 64kB |
| 148 |
#max_stack_depth = 2MB # min 100kB |
| 149 |
#shared_memory_type = mmap # the default is the first option |
| 150 |
# supported by the operating system: |
| 151 |
# mmap |
| 152 |
# sysv |
| 153 |
# windows |
| 154 |
# (change requires restart) |
| 155 |
#dynamic_shared_memory_type = posix # the default is usually the first option |
| 156 |
# supported by the operating system: |
| 157 |
# posix |
| 158 |
# sysv |
| 159 |
# windows |
| 160 |
# mmap |
| 161 |
# (change requires restart) |
| 162 |
#min_dynamic_shared_memory = 0MB # (change requires restart) |
| 163 |
#vacuum_buffer_usage_limit = 2MB # size of vacuum and analyze buffer access strategy ring; |
| 164 |
# 0 to disable vacuum buffer access strategy; |
| 165 |
# range 128kB to 16GB |
| 166 |
|
| 167 |
# SLRU buffers (change requires restart) |
| 168 |
#commit_timestamp_buffers = 0 # memory for pg_commit_ts (0 = auto) |
| 169 |
#multixact_offset_buffers = 16 # memory for pg_multixact/offsets |
| 170 |
#multixact_member_buffers = 32 # memory for pg_multixact/members |
| 171 |
#notify_buffers = 16 # memory for pg_notify |
| 172 |
#serializable_buffers = 32 # memory for pg_serial |
| 173 |
#subtransaction_buffers = 0 # memory for pg_subtrans (0 = auto) |
| 174 |
#transaction_buffers = 0 # memory for pg_xact (0 = auto) |
| 175 |
|
| 176 |
# - Disk - |
| 177 |
|
| 178 |
#temp_file_limit = -1 # limits per-process temp file space |
| 179 |
# in kilobytes, or -1 for no limit |
| 180 |
|
| 181 |
#file_copy_method = copy # copy, clone (if supported by OS) |
| 182 |
#file_extend_method = posix_fallocate # the default is the first option supported |
| 183 |
# by the operating system: |
| 184 |
# posix_fallocate (most Unix-like systems) |
| 185 |
# write_zeros |
| 186 |
|
| 187 |
#max_notify_queue_pages = 1048576 # limits the number of SLRU pages allocated |
| 188 |
# for NOTIFY / LISTEN queue |
| 189 |
|
| 190 |
# - Kernel Resources - |
| 191 |
|
| 192 |
#max_files_per_process = 1000 # min 64 |
| 193 |
# (change requires restart) |
| 194 |
|
| 195 |
# - Background Writer - |
| 196 |
|
| 197 |
#bgwriter_delay = 200ms # 10-10000ms between rounds |
| 198 |
#bgwriter_lru_maxpages = 100 # max buffers written/round, 0 disables |
| 199 |
#bgwriter_lru_multiplier = 2.0 # 0-10.0 multiplier on buffers scanned/round |
| 200 |
#bgwriter_flush_after = 0 # measured in pages, 0 disables |
| 201 |
|
| 202 |
# - I/O - |
| 203 |
|
| 204 |
#backend_flush_after = 0 # measured in pages, 0 disables |
| 205 |
#effective_io_concurrency = 16 # 1-1000; 0 disables issuing multiple simultaneous IO requests |
| 206 |
#maintenance_io_concurrency = 16 # 1-1000; same as effective_io_concurrency |
| 207 |
#io_max_combine_limit = 128kB # usually 1-128 blocks (depends on OS) |
| 208 |
# (change requires restart) |
| 209 |
#io_combine_limit = 128kB # usually 1-128 blocks (depends on OS) |
| 210 |
|
| 211 |
#io_method = worker # worker, io_uring, sync |
| 212 |
# (change requires restart) |
| 213 |
#io_max_concurrency = -1 # Max number of IOs that one process |
| 214 |
# can execute simultaneously |
| 215 |
# -1 sets based on shared_buffers |
| 216 |
# (change requires restart) |
| 217 |
#io_workers = 3 # 1-32; |
| 218 |
|
| 219 |
# - Worker Processes - |
| 220 |
|
| 221 |
#max_worker_processes = 8 # (change requires restart) |
| 222 |
#max_parallel_workers_per_gather = 2 # limited by max_parallel_workers |
| 223 |
#max_parallel_maintenance_workers = 2 # limited by max_parallel_workers |
| 224 |
#max_parallel_workers = 8 # number of max_worker_processes that |
| 225 |
# can be used in parallel operations |
| 226 |
#parallel_leader_participation = on |
| 227 |
|
| 228 |
|
| 229 |
#------------------------------------------------------------------------------ |
| 230 |
# WRITE-AHEAD LOG |
| 231 |
#------------------------------------------------------------------------------ |
| 232 |
|
| 233 |
# - Settings - |
| 234 |
|
| 235 |
#wal_level = replica # minimal, replica, or logical |
| 236 |
# (change requires restart) |
| 237 |
#fsync = on # flush data to disk for crash safety |
| 238 |
# (turning this off can cause |
| 239 |
# unrecoverable data corruption) |
| 240 |
#synchronous_commit = on # synchronization level; |
| 241 |
# off, local, remote_write, remote_apply, or on |
| 242 |
#wal_sync_method = fsync # the default is the first option |
| 243 |
# supported by the operating system: |
| 244 |
# open_datasync |
| 245 |
# fdatasync (default on Linux and FreeBSD) |
| 246 |
# fsync |
| 247 |
# fsync_writethrough |
| 248 |
# open_sync |
| 249 |
#full_page_writes = on # recover from partial page writes |
| 250 |
#wal_log_hints = off # also do full page writes of non-critical updates |
| 251 |
# (change requires restart) |
| 252 |
#wal_compression = off # enables compression of full-page writes; |
| 253 |
# off, pglz (or "on"), lz4, or zstd |
| 254 |
#wal_init_zero = on # zero-fill new WAL files |
| 255 |
#wal_recycle = on # recycle WAL files |
| 256 |
#wal_buffers = -1 # min 32kB, -1 sets based on shared_buffers |
| 257 |
# (change requires restart) |
| 258 |
#wal_writer_delay = 200ms # 1-10000 milliseconds |
| 259 |
#wal_writer_flush_after = 1MB # measured in pages, 0 disables |
| 260 |
#wal_skip_threshold = 2MB |
| 261 |
|
| 262 |
#commit_delay = 0 # range 0-100000, in microseconds |
| 263 |
#commit_siblings = 5 # range 0-1000 |
| 264 |
|
| 265 |
# - Checkpoints - |
| 266 |
|
| 267 |
#checkpoint_timeout = 5min # range 30s-1d |
| 268 |
#checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 |
| 269 |
#checkpoint_flush_after = 0 # measured in pages, 0 disables |
| 270 |
#checkpoint_warning = 30s # 0 disables |
| 271 |
#max_wal_size = 1GB |
| 272 |
#min_wal_size = 80MB |
| 273 |
|
| 274 |
# - Prefetching during recovery - |
| 275 |
|
| 276 |
#recovery_prefetch = try # prefetch pages referenced in the WAL? |
| 277 |
#wal_decode_buffer_size = 512kB # lookahead window used for prefetching |
| 278 |
# (change requires restart) |
| 279 |
|
| 280 |
# - Archiving - |
| 281 |
|
| 282 |
#archive_mode = off # enables archiving; off, on, or always |
| 283 |
# (change requires restart) |
| 284 |
#archive_library = '' # library to use to archive a WAL file |
| 285 |
# (empty string indicates archive_command should |
| 286 |
# be used) |
| 287 |
#archive_command = '' # command to use to archive a WAL file |
| 288 |
# placeholders: %p = path of file to archive |
| 289 |
# %f = file name only |
| 290 |
# e.g. 'test ! -f /mnt/server/archivedir/%f && cp %p /mnt/server/archivedir/%f' |
| 291 |
#archive_timeout = 0 # force a WAL file switch after this |
| 292 |
# number of seconds; 0 disables |
| 293 |
|
| 294 |
# - Archive Recovery - |
| 295 |
|
| 296 |
# These are only used in recovery mode. |
| 297 |
|
| 298 |
#restore_command = '' # command to use to restore an archived WAL file |
| 299 |
# placeholders: %p = path of file to restore |
| 300 |
# %f = file name only |
| 301 |
# e.g. 'cp /mnt/server/archivedir/%f %p' |
| 302 |
#archive_cleanup_command = '' # command to execute at every restartpoint |
| 303 |
#recovery_end_command = '' # command to execute at completion of recovery |
| 304 |
|
| 305 |
# - Recovery Target - |
| 306 |
|
| 307 |
# Set these only when performing a targeted recovery. |
| 308 |
|
| 309 |
#recovery_target = '' # 'immediate' to end recovery as soon as a |
| 310 |
# consistent state is reached |
| 311 |
# (change requires restart) |
| 312 |
#recovery_target_name = '' # the named restore point to which recovery will proceed |
| 313 |
# (change requires restart) |
| 314 |
#recovery_target_time = '' # the time stamp up to which recovery will proceed |
| 315 |
# (change requires restart) |
| 316 |
#recovery_target_xid = '' # the transaction ID up to which recovery will proceed |
| 317 |
# (change requires restart) |
| 318 |
#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed |
| 319 |
# (change requires restart) |
| 320 |
#recovery_target_inclusive = on # Specifies whether to stop: |
| 321 |
# just after the specified recovery target (on) |
| 322 |
# just before the recovery target (off) |
| 323 |
# (change requires restart) |
| 324 |
#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID |
| 325 |
# (change requires restart) |
| 326 |
#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' |
| 327 |
# (change requires restart) |
| 328 |
|
| 329 |
# - WAL Summarization - |
| 330 |
|
| 331 |
#summarize_wal = off # run WAL summarizer process? |
| 332 |
#wal_summary_keep_time = '10d' # when to remove old summary files, 0 = never |
| 333 |
|
| 334 |
|
| 335 |
#------------------------------------------------------------------------------ |
| 336 |
# REPLICATION |
| 337 |
#------------------------------------------------------------------------------ |
| 338 |
|
| 339 |
# - Sending Servers - |
| 340 |
|
| 341 |
# Set these on the primary and on any standby that will send replication data. |
| 342 |
|
| 343 |
#max_wal_senders = 10 # max number of walsender processes |
| 344 |
# (change requires restart) |
| 345 |
#max_replication_slots = 10 # max number of replication slots |
| 346 |
# (change requires restart) |
| 347 |
#wal_keep_size = 0 # in megabytes; 0 disables |
| 348 |
#max_slot_wal_keep_size = -1 # in megabytes; -1 disables |
| 349 |
#idle_replication_slot_timeout = 0 # in seconds; 0 disables |
| 350 |
#wal_sender_timeout = 60s # in milliseconds; 0 disables |
| 351 |
#track_commit_timestamp = off # collect timestamp of transaction commit |
| 352 |
# (change requires restart) |
| 353 |
|
| 354 |
# - Primary Server - |
| 355 |
|
| 356 |
# These settings are ignored on a standby server. |
| 357 |
|
| 358 |
#synchronous_standby_names = '' # standby servers that provide sync rep |
| 359 |
# method to choose sync standbys, number of sync standbys, |
| 360 |
# and comma-separated list of application_name |
| 361 |
# from standby(s); '*' = all |
| 362 |
#synchronized_standby_slots = '' # streaming replication standby server slot |
| 363 |
# names that logical walsender processes will wait for |
| 364 |
|
| 365 |
# - Standby Servers - |
| 366 |
|
| 367 |
# These settings are ignored on a primary server. |
| 368 |
|
| 369 |
#primary_conninfo = '' # connection string to sending server |
| 370 |
#primary_slot_name = '' # replication slot on sending server |
| 371 |
#hot_standby = on # "off" disallows queries during recovery |
| 372 |
# (change requires restart) |
| 373 |
#max_standby_archive_delay = 30s # max delay before canceling queries |
| 374 |
# when reading WAL from archive; |
| 375 |
# -1 allows indefinite delay |
| 376 |
#max_standby_streaming_delay = 30s # max delay before canceling queries |
| 377 |
# when reading streaming WAL; |
| 378 |
# -1 allows indefinite delay |
| 379 |
#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name |
| 380 |
# is not set |
| 381 |
#wal_receiver_status_interval = 10s # send replies at least this often |
| 382 |
# 0 disables |
| 383 |
#hot_standby_feedback = off # send info from standby to prevent |
| 384 |
# query conflicts |
| 385 |
#wal_receiver_timeout = 60s # time that receiver waits for |
| 386 |
# communication from primary |
| 387 |
# in milliseconds; 0 disables |
| 388 |
#wal_retrieve_retry_interval = 5s # time to wait before retrying to |
| 389 |
# retrieve WAL after a failed attempt |
| 390 |
#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery |
| 391 |
#sync_replication_slots = off # enables slot synchronization on the physical standby from the primary |
| 392 |
|
| 393 |
# - Subscribers - |
| 394 |
|
| 395 |
# These settings are ignored on a publisher. |
| 396 |
|
| 397 |
#max_active_replication_origins = 10 # max number of active replication origins |
| 398 |
# (change requires restart) |
| 399 |
#max_logical_replication_workers = 4 # taken from max_worker_processes |
| 400 |
# (change requires restart) |
| 401 |
#max_sync_workers_per_subscription = 2 # taken from max_logical_replication_workers |
| 402 |
#max_parallel_apply_workers_per_subscription = 2 # taken from max_logical_replication_workers |
| 403 |
|
| 404 |
|
| 405 |
#------------------------------------------------------------------------------ |
| 406 |
# QUERY TUNING |
| 407 |
#------------------------------------------------------------------------------ |
| 408 |
|
| 409 |
# - Planner Method Configuration - |
| 410 |
|
| 411 |
#enable_async_append = on |
| 412 |
#enable_bitmapscan = on |
| 413 |
#enable_gathermerge = on |
| 414 |
#enable_hashagg = on |
| 415 |
#enable_hashjoin = on |
| 416 |
#enable_incremental_sort = on |
| 417 |
#enable_indexscan = on |
| 418 |
#enable_indexonlyscan = on |
| 419 |
#enable_material = on |
| 420 |
#enable_memoize = on |
| 421 |
#enable_mergejoin = on |
| 422 |
#enable_nestloop = on |
| 423 |
#enable_parallel_append = on |
| 424 |
#enable_parallel_hash = on |
| 425 |
#enable_partition_pruning = on |
| 426 |
#enable_partitionwise_join = off |
| 427 |
#enable_partitionwise_aggregate = off |
| 428 |
#enable_presorted_aggregate = on |
| 429 |
#enable_seqscan = on |
| 430 |
#enable_sort = on |
| 431 |
#enable_tidscan = on |
| 432 |
#enable_group_by_reordering = on |
| 433 |
#enable_distinct_reordering = on |
| 434 |
#enable_self_join_elimination = on |
| 435 |
|
| 436 |
# - Planner Cost Constants - |
| 437 |
|
| 438 |
#seq_page_cost = 1.0 # measured on an arbitrary scale |
| 439 |
#random_page_cost = 4.0 # same scale as above |
| 440 |
#cpu_tuple_cost = 0.01 # same scale as above |
| 441 |
#cpu_index_tuple_cost = 0.005 # same scale as above |
| 442 |
#cpu_operator_cost = 0.0025 # same scale as above |
| 443 |
#parallel_setup_cost = 1000.0 # same scale as above |
| 444 |
#parallel_tuple_cost = 0.1 # same scale as above |
| 445 |
#min_parallel_table_scan_size = 8MB |
| 446 |
#min_parallel_index_scan_size = 512kB |
| 447 |
#effective_cache_size = 4GB |
| 448 |
|
| 449 |
#jit_above_cost = 100000 # perform JIT compilation if available |
| 450 |
# and query more expensive than this; |
| 451 |
# -1 disables |
| 452 |
#jit_inline_above_cost = 500000 # inline small functions if query is |
| 453 |
# more expensive than this; -1 disables |
| 454 |
#jit_optimize_above_cost = 500000 # use expensive JIT optimizations if |
| 455 |
# query is more expensive than this; |
| 456 |
# -1 disables |
| 457 |
|
| 458 |
# - Genetic Query Optimizer - |
| 459 |
|
| 460 |
#geqo = on |
| 461 |
#geqo_threshold = 12 |
| 462 |
#geqo_effort = 5 # range 1-10 |
| 463 |
#geqo_pool_size = 0 # selects default based on effort |
| 464 |
#geqo_generations = 0 # selects default based on effort |
| 465 |
#geqo_selection_bias = 2.0 # range 1.5-2.0 |
| 466 |
#geqo_seed = 0.0 # range 0.0-1.0 |
| 467 |
|
| 468 |
# - Other Planner Options - |
| 469 |
|
| 470 |
#default_statistics_target = 100 # range 1-10000 |
| 471 |
#constraint_exclusion = partition # on, off, or partition |
| 472 |
#cursor_tuple_fraction = 0.1 # range 0.0-1.0 |
| 473 |
#from_collapse_limit = 8 |
| 474 |
#jit = on # allow JIT compilation |
| 475 |
#join_collapse_limit = 8 # 1 disables collapsing of explicit |
| 476 |
# JOIN clauses |
| 477 |
#plan_cache_mode = auto # auto, force_generic_plan or |
| 478 |
# force_custom_plan |
| 479 |
#recursive_worktable_factor = 10.0 # range 0.001-1000000 |
| 480 |
|
| 481 |
|
| 482 |
#------------------------------------------------------------------------------ |
| 483 |
# REPORTING AND LOGGING |
| 484 |
#------------------------------------------------------------------------------ |
| 485 |
|
| 486 |
# - Where to Log - |
| 487 |
|
| 488 |
#log_destination = 'stderr' # Valid values are combinations of |
| 489 |
# stderr, csvlog, jsonlog, syslog, and |
| 490 |
# eventlog, depending on platform. |
| 491 |
# csvlog and jsonlog require |
| 492 |
# logging_collector to be on. |
| 493 |
|
| 494 |
# This is used when logging to stderr: |
| 495 |
#logging_collector = off # Enable capturing of stderr, jsonlog, |
| 496 |
# and csvlog into log files. Required |
| 497 |
# to be on for csvlogs and jsonlogs. |
| 498 |
# (change requires restart) |
| 499 |
|
| 500 |
# These are only used if logging_collector is on: |
| 501 |
#log_directory = 'log' # directory where log files are written, |
| 502 |
# can be absolute or relative to PGDATA |
| 503 |
#log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # log file name pattern, |
| 504 |
# can include strftime() escapes |
| 505 |
#log_file_mode = 0600 # creation mode for log files, |
| 506 |
# begin with 0 to use octal notation |
| 507 |
#log_rotation_age = 1d # Automatic rotation of logfiles will |
| 508 |
# happen after that time. 0 disables. |
| 509 |
#log_rotation_size = 10MB # Automatic rotation of logfiles will |
| 510 |
# happen after that much log output. |
| 511 |
# 0 disables. |
| 512 |
#log_truncate_on_rotation = off # If on, an existing log file with the |
| 513 |
# same name as the new log file will be |
| 514 |
# truncated rather than appended to. |
| 515 |
# But such truncation only occurs on |
| 516 |
# time-driven rotation, not on restarts |
| 517 |
# or size-driven rotation. Default is |
| 518 |
# off, meaning append to existing files |
| 519 |
# in all cases. |
| 520 |
|
| 521 |
# These are relevant when logging to syslog: |
| 522 |
#syslog_facility = 'LOCAL0' |
| 523 |
#syslog_ident = 'postgres' |
| 524 |
#syslog_sequence_numbers = on |
| 525 |
#syslog_split_messages = on |
| 526 |
|
| 527 |
# This is only relevant when logging to eventlog (Windows): |
| 528 |
# (change requires restart) |
| 529 |
#event_source = 'PostgreSQL' |
| 530 |
|
| 531 |
# - When to Log - |
| 532 |
|
| 533 |
#log_min_messages = warning # values in order of decreasing detail: |
| 534 |
# debug5 |
| 535 |
# debug4 |
| 536 |
# debug3 |
| 537 |
# debug2 |
| 538 |
# debug1 |
| 539 |
# info |
| 540 |
# notice |
| 541 |
# warning |
| 542 |
# error |
| 543 |
# log |
| 544 |
# fatal |
| 545 |
# panic |
| 546 |
|
| 547 |
#log_min_error_statement = error # values in order of decreasing detail: |
| 548 |
# debug5 |
| 549 |
# debug4 |
| 550 |
# debug3 |
| 551 |
# debug2 |
| 552 |
# debug1 |
| 553 |
# info |
| 554 |
# notice |
| 555 |
# warning |
| 556 |
# error |
| 557 |
# log |
| 558 |
# fatal |
| 559 |
# panic (effectively off) |
| 560 |
|
| 561 |
#log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements |
| 562 |
# and their durations, > 0 logs only |
| 563 |
# statements running at least this number |
| 564 |
# of milliseconds |
| 565 |
|
| 566 |
#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements |
| 567 |
# and their durations, > 0 logs only a sample of |
| 568 |
# statements running at least this number |
| 569 |
# of milliseconds; |
| 570 |
# sample fraction is determined by log_statement_sample_rate |
| 571 |
|
| 572 |
#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding |
| 573 |
# log_min_duration_sample to be logged; |
| 574 |
# 1.0 logs all such statements, 0.0 never logs |
| 575 |
|
| 576 |
|
| 577 |
#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements |
| 578 |
# are logged regardless of their duration; 1.0 logs all |
| 579 |
# statements from all transactions, 0.0 never logs |
| 580 |
|
| 581 |
#log_startup_progress_interval = 10s # Time between progress updates for |
| 582 |
# long-running startup operations. |
| 583 |
# 0 disables the feature, > 0 indicates |
| 584 |
# the interval in milliseconds. |
| 585 |
|
| 586 |
# - What to Log - |
| 587 |
|
| 588 |
#debug_print_parse = off |
| 589 |
#debug_print_rewritten = off |
| 590 |
#debug_print_plan = off |
| 591 |
#debug_pretty_print = on |
| 592 |
#log_autovacuum_min_duration = 10min # log autovacuum activity; |
| 593 |
# -1 disables, 0 logs all actions and |
| 594 |
# their durations, > 0 logs only |
| 595 |
# actions running at least this number |
| 596 |
# of milliseconds. |
| 597 |
#log_checkpoints = on |
| 598 |
#log_connections = '' # log aspects of connection setup |
| 599 |
# options include receipt, authentication, authorization, |
| 600 |
# setup_durations, and all to log all of these aspects |
| 601 |
#log_disconnections = off |
| 602 |
#log_duration = off # log statement duration |
| 603 |
#log_error_verbosity = default # terse, default, or verbose messages |
| 604 |
#log_hostname = off |
| 605 |
#log_line_prefix = '%m [%p] ' # special values: |
| 606 |
# %a = application name |
| 607 |
# %u = user name |
| 608 |
# %d = database name |
| 609 |
# %r = remote host and port |
| 610 |
# %h = remote host |
| 611 |
# %L = local address |
| 612 |
# %b = backend type |
| 613 |
# %p = process ID |
| 614 |
# %P = process ID of parallel group leader |
| 615 |
# %t = timestamp without milliseconds |
| 616 |
# %m = timestamp with milliseconds |
| 617 |
# %n = timestamp with milliseconds (as a Unix epoch) |
| 618 |
# %Q = query ID (0 if none or not computed) |
| 619 |
# %i = command tag |
| 620 |
# %e = SQL state |
| 621 |
# %c = session ID |
| 622 |
# %l = session line number |
| 623 |
# %s = session start timestamp |
| 624 |
# %v = virtual transaction ID |
| 625 |
# %x = transaction ID (0 if none) |
| 626 |
# %q = stop here in non-session |
| 627 |
# processes |
| 628 |
# %% = '%' |
| 629 |
# e.g. '<%u%%%d> ' |
| 630 |
#log_lock_waits = off # log lock waits >= deadlock_timeout |
| 631 |
#log_lock_failures = off # log lock failures |
| 632 |
#log_recovery_conflict_waits = off # log standby recovery conflict waits |
| 633 |
# >= deadlock_timeout |
| 634 |
#log_parameter_max_length = -1 # when logging statements, limit logged |
| 635 |
# bind-parameter values to N bytes; |
| 636 |
# -1 means print in full, 0 disables |
| 637 |
#log_parameter_max_length_on_error = 0 # when logging an error, limit logged |
| 638 |
# bind-parameter values to N bytes; |
| 639 |
# -1 means print in full, 0 disables |
| 640 |
#log_statement = 'none' # none, ddl, mod, all |
| 641 |
#log_replication_commands = off |
| 642 |
#log_temp_files = -1 # log temporary files equal or larger |
| 643 |
# than the specified size in kilobytes; |
| 644 |
# -1 disables, 0 logs all temp files |
| 645 |
#log_timezone = 'GMT' |
| 646 |
|
| 647 |
# - Process Title - |
| 648 |
|
| 649 |
#cluster_name = '' # added to process titles if nonempty |
| 650 |
# (change requires restart) |
| 651 |
#update_process_title = on |
| 652 |
|
| 653 |
|
| 654 |
#------------------------------------------------------------------------------ |
| 655 |
# STATISTICS |
| 656 |
#------------------------------------------------------------------------------ |
| 657 |
|
| 658 |
# - Cumulative Query and Index Statistics - |
| 659 |
|
| 660 |
#track_activities = on |
| 661 |
#track_activity_query_size = 1024 # (change requires restart) |
| 662 |
#track_counts = on |
| 663 |
#track_cost_delay_timing = off |
| 664 |
#track_io_timing = off |
| 665 |
#track_wal_io_timing = off |
| 666 |
#track_functions = none # none, pl, all |
| 667 |
#stats_fetch_consistency = cache # cache, none, snapshot |
| 668 |
|
| 669 |
|
| 670 |
# - Monitoring - |
| 671 |
|
| 672 |
#compute_query_id = auto |
| 673 |
#log_statement_stats = off |
| 674 |
#log_parser_stats = off |
| 675 |
#log_planner_stats = off |
| 676 |
#log_executor_stats = off |
| 677 |
|
| 678 |
|
| 679 |
#------------------------------------------------------------------------------ |
| 680 |
# VACUUMING |
| 681 |
#------------------------------------------------------------------------------ |
| 682 |
|
| 683 |
# - Automatic Vacuuming - |
| 684 |
|
| 685 |
#autovacuum = on # Enable autovacuum subprocess? 'on' |
| 686 |
# requires track_counts to also be on. |
| 687 |
#autovacuum_worker_slots = 16 # autovacuum worker slots to allocate |
| 688 |
# (change requires restart) |
| 689 |
#autovacuum_max_workers = 3 # max number of autovacuum subprocesses |
| 690 |
#autovacuum_naptime = 1min # time between autovacuum runs |
| 691 |
#autovacuum_vacuum_threshold = 50 # min number of row updates before |
| 692 |
# vacuum |
| 693 |
#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts |
| 694 |
# before vacuum; -1 disables insert |
| 695 |
# vacuums |
| 696 |
#autovacuum_analyze_threshold = 50 # min number of row updates before |
| 697 |
# analyze |
| 698 |
#autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum |
| 699 |
#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of unfrozen pages |
| 700 |
# before insert vacuum |
| 701 |
#autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze |
| 702 |
#autovacuum_vacuum_max_threshold = 100000000 # max number of row updates |
| 703 |
# before vacuum; -1 disables max |
| 704 |
# threshold |
| 705 |
#autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum |
| 706 |
# (change requires restart) |
| 707 |
#autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age |
| 708 |
# before forced vacuum |
| 709 |
# (change requires restart) |
| 710 |
#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for |
| 711 |
# autovacuum, in milliseconds; |
| 712 |
# -1 means use vacuum_cost_delay |
| 713 |
#autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for |
| 714 |
# autovacuum, -1 means use |
| 715 |
# vacuum_cost_limit |
| 716 |
|
| 717 |
# - Cost-Based Vacuum Delay - |
| 718 |
|
| 719 |
#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) |
| 720 |
#vacuum_cost_page_hit = 1 # 0-10000 credits |
| 721 |
#vacuum_cost_page_miss = 2 # 0-10000 credits |
| 722 |
#vacuum_cost_page_dirty = 20 # 0-10000 credits |
| 723 |
#vacuum_cost_limit = 200 # 1-10000 credits |
| 724 |
|
| 725 |
# - Default Behavior - |
| 726 |
|
| 727 |
#vacuum_truncate = on # enable truncation after vacuum |
| 728 |
|
| 729 |
# - Freezing - |
| 730 |
|
| 731 |
#vacuum_freeze_table_age = 150000000 |
| 732 |
#vacuum_freeze_min_age = 50000000 |
| 733 |
#vacuum_failsafe_age = 1600000000 |
| 734 |
#vacuum_multixact_freeze_table_age = 150000000 |
| 735 |
#vacuum_multixact_freeze_min_age = 5000000 |
| 736 |
#vacuum_multixact_failsafe_age = 1600000000 |
| 737 |
#vacuum_max_eager_freeze_failure_rate = 0.03 # 0 disables eager scanning |
| 738 |
|
| 739 |
#------------------------------------------------------------------------------ |
| 740 |
# CLIENT CONNECTION DEFAULTS |
| 741 |
#------------------------------------------------------------------------------ |
| 742 |
|
| 743 |
# - Statement Behavior - |
| 744 |
|
| 745 |
#client_min_messages = notice # values in order of decreasing detail: |
| 746 |
# debug5 |
| 747 |
# debug4 |
| 748 |
# debug3 |
| 749 |
# debug2 |
| 750 |
# debug1 |
| 751 |
# log |
| 752 |
# notice |
| 753 |
# warning |
| 754 |
# error |
| 755 |
#search_path = '"$user", public' # schema names |
| 756 |
#row_security = on |
| 757 |
#default_table_access_method = 'heap' |
| 758 |
#default_tablespace = '' # a tablespace name, '' uses the default |
| 759 |
#default_toast_compression = 'pglz' # 'pglz' or 'lz4' |
| 760 |
#temp_tablespaces = '' # a list of tablespace names, '' uses |
| 761 |
# only default tablespace |
| 762 |
#check_function_bodies = on |
| 763 |
#default_transaction_isolation = 'read committed' |
| 764 |
#default_transaction_read_only = off |
| 765 |
#default_transaction_deferrable = off |
| 766 |
#session_replication_role = 'origin' |
| 767 |
#statement_timeout = 0 # in milliseconds, 0 is disabled |
| 768 |
#transaction_timeout = 0 # in milliseconds, 0 is disabled |
| 769 |
#lock_timeout = 0 # in milliseconds, 0 is disabled |
| 770 |
#idle_in_transaction_session_timeout = 0 # in milliseconds, 0 is disabled |
| 771 |
#idle_session_timeout = 0 # in milliseconds, 0 is disabled |
| 772 |
#bytea_output = 'hex' # hex, escape |
| 773 |
#xmlbinary = 'base64' |
| 774 |
#xmloption = 'content' |
| 775 |
#gin_pending_list_limit = 4MB |
| 776 |
#createrole_self_grant = '' # set and/or inherit |
| 777 |
#event_triggers = on |
| 778 |
|
| 779 |
# - Locale and Formatting - |
| 780 |
|
| 781 |
#datestyle = 'iso, mdy' |
| 782 |
#intervalstyle = 'postgres' |
| 783 |
#timezone = 'GMT' |
| 784 |
#timezone_abbreviations = 'Default' # Select the set of available time zone |
| 785 |
# abbreviations. Currently, there are |
| 786 |
# Default |
| 787 |
# Australia (historical usage) |
| 788 |
# India |
| 789 |
# You can create your own file in |
| 790 |
# share/timezonesets/. |
| 791 |
#extra_float_digits = 1 # min -15, max 3; any value >0 actually |
| 792 |
# selects precise output mode |
| 793 |
#client_encoding = sql_ascii # actually, defaults to database |
| 794 |
# encoding |
| 795 |
|
| 796 |
# These settings are initialized by initdb, but they can be changed. |
| 797 |
#lc_messages = '' # locale for system error message |
| 798 |
# strings |
| 799 |
#lc_monetary = 'C' # locale for monetary formatting |
| 800 |
#lc_numeric = 'C' # locale for number formatting |
| 801 |
#lc_time = 'C' # locale for time formatting |
| 802 |
|
| 803 |
#icu_validation_level = warning # report ICU locale validation |
| 804 |
# errors at the given level |
| 805 |
|
| 806 |
# default configuration for text search |
| 807 |
#default_text_search_config = 'pg_catalog.simple' |
| 808 |
|
| 809 |
# - Shared Library Preloading - |
| 810 |
|
| 811 |
#local_preload_libraries = '' |
| 812 |
#session_preload_libraries = '' |
| 813 |
#shared_preload_libraries = '' # (change requires restart) |
| 814 |
#jit_provider = 'llvmjit' # JIT library to use |
| 815 |
|
| 816 |
# - Other Defaults - |
| 817 |
|
| 818 |
#dynamic_library_path = '$libdir' |
| 819 |
#extension_control_path = '$system' |
| 820 |
#gin_fuzzy_search_limit = 0 |
| 821 |
#output_plugin_libraries = 'pgoutput, test_decoding' # approved plugins for logical decoding |
| 822 |
|
| 823 |
|
| 824 |
#------------------------------------------------------------------------------ |
| 825 |
# LOCK MANAGEMENT |
| 826 |
#------------------------------------------------------------------------------ |
| 827 |
|
| 828 |
#deadlock_timeout = 1s |
| 829 |
#max_locks_per_transaction = 64 # min 10 |
| 830 |
# (change requires restart) |
| 831 |
#max_pred_locks_per_transaction = 64 # min 10 |
| 832 |
# (change requires restart) |
| 833 |
#max_pred_locks_per_relation = -2 # negative values mean |
| 834 |
# (max_pred_locks_per_transaction |
| 835 |
# / -max_pred_locks_per_relation) - 1 |
| 836 |
#max_pred_locks_per_page = 2 # min 0 |
| 837 |
|
| 838 |
|
| 839 |
#------------------------------------------------------------------------------ |
| 840 |
# VERSION AND PLATFORM COMPATIBILITY |
| 841 |
#------------------------------------------------------------------------------ |
| 842 |
|
| 843 |
# - Previous PostgreSQL Versions - |
| 844 |
|
| 845 |
#array_nulls = on |
| 846 |
#backslash_quote = safe_encoding # on, off, or safe_encoding |
| 847 |
#escape_string_warning = on |
| 848 |
#lo_compat_privileges = off |
| 849 |
#quote_all_identifiers = off |
| 850 |
#standard_conforming_strings = on |
| 851 |
#synchronize_seqscans = on |
| 852 |
|
| 853 |
# - Other Platforms and Clients - |
| 854 |
|
| 855 |
#transform_null_equals = off |
| 856 |
#allow_alter_system = on |
| 857 |
|
| 858 |
|
| 859 |
#------------------------------------------------------------------------------ |
| 860 |
# ERROR HANDLING |
| 861 |
#------------------------------------------------------------------------------ |
| 862 |
|
| 863 |
#exit_on_error = off # terminate session on any error? |
| 864 |
#restart_after_crash = on # reinitialize after backend crash? |
| 865 |
#data_sync_retry = off # retry or panic on failure to fsync |
| 866 |
# data? |
| 867 |
# (change requires restart) |
| 868 |
#recovery_init_sync_method = fsync # fsync, syncfs (Linux 5.8+) |
| 869 |
|
| 870 |
|
| 871 |
#------------------------------------------------------------------------------ |
| 872 |
# CONFIG FILE INCLUDES |
| 873 |
#------------------------------------------------------------------------------ |
| 874 |
|
| 875 |
# These options allow settings to be loaded from files other than the |
| 876 |
# default postgresql.conf. Note that these are directives, not variable |
| 877 |
# assignments, so they can usefully be given more than once. |
| 878 |
|
| 879 |
#include_dir = '...' # include files ending in '.conf' from |
| 880 |
# a directory, e.g., 'conf.d' |
| 881 |
#include_if_exists = '...' # include file only if it exists |
| 882 |
#include = '...' # include file |
| 883 |
|
| 884 |
|
| 885 |
#------------------------------------------------------------------------------ |
| 886 |
# CUSTOMIZED OPTIONS |
| 887 |
#------------------------------------------------------------------------------ |
| 888 |
|
| 889 |
# Add settings for extensions here |