Debian Codegraph @

src/backend/access/transam/xloginsert.c

raw
1 /*-------------------------------------------------------------------------
2 *
3 * xloginsert.c
4 * Functions for constructing WAL records
5 *
6 * Constructing a WAL record begins with a call to XLogBeginInsert,
7 * followed by a number of XLogRegister* calls. The registered data is
8 * collected in private working memory, and finally assembled into a chain
9 * of XLogRecData structs by a call to XLogRecordAssemble(). See
10 * access/transam/README for details.
11 *
12 * Portions Copyright (c) 1996-2025, PostgreSQL Global Development Group
13 * Portions Copyright (c) 1994, Regents of the University of California
14 *
15 * src/backend/access/transam/xloginsert.c
16 *
17 *-------------------------------------------------------------------------
18 */
19
20 #include "postgres.h"
21
22 #ifdef USE_LZ4
23 #include <lz4.h>
24 #endif
25
26 #ifdef USE_ZSTD
27 #include <zstd.h>
28 #endif
29
30 #include "access/xact.h"
31 #include "access/xlog.h"
32 #include "access/xlog_internal.h"
33 #include "access/xloginsert.h"
34 #include "catalog/pg_control.h"
35 #include "common/pg_lzcompress.h"
36 #include "miscadmin.h"
37 #include "pg_trace.h"
38 #include "replication/origin.h"
39 #include "storage/bufmgr.h"
40 #include "storage/proc.h"
41 #include "utils/memutils.h"
42
43 /*
44 * Guess the maximum buffer size required to store a compressed version of
45 * backup block image.
46 */
47 #ifdef USE_LZ4
48 #define LZ4_MAX_BLCKSZ LZ4_COMPRESSBOUND(BLCKSZ)
49 #else
50 #define LZ4_MAX_BLCKSZ 0
51 #endif
52
53 #ifdef USE_ZSTD
54 #define ZSTD_MAX_BLCKSZ ZSTD_COMPRESSBOUND(BLCKSZ)
55 #else
56 #define ZSTD_MAX_BLCKSZ 0
57 #endif
58
59 #define PGLZ_MAX_BLCKSZ PGLZ_MAX_OUTPUT(BLCKSZ)
60
61 /* Buffer size required to store a compressed version of backup block image */
62 #define COMPRESS_BUFSIZE Max(Max(PGLZ_MAX_BLCKSZ, LZ4_MAX_BLCKSZ), ZSTD_MAX_BLCKSZ)
63
64 /*
65 * For each block reference registered with XLogRegisterBuffer, we fill in
66 * a registered_buffer struct.
67 */
68 typedef struct
69 {
70 bool in_use; /* is this slot in use? */
71 uint8 flags; /* REGBUF_* flags */
72 RelFileLocator rlocator; /* identifies the relation and block */
73 ForkNumber forkno;
74 BlockNumber block;
75 const PageData *page; /* page content */
76 uint32 rdata_len; /* total length of data in rdata chain */
77 XLogRecData *rdata_head; /* head of the chain of data registered with
78 * this block */
79 XLogRecData *rdata_tail; /* last entry in the chain, or &rdata_head if
80 * empty */
81
82 XLogRecData bkp_rdatas[2]; /* temporary rdatas used to hold references to
83 * backup block data in XLogRecordAssemble() */
84
85 /* buffer to store a compressed version of backup block image */
86 char compressed_page[COMPRESS_BUFSIZE];
87 } registered_buffer;
88
89 static registered_buffer *registered_buffers;
90 static int max_registered_buffers; /* allocated size */
91 static int max_registered_block_id = 0; /* highest block_id + 1 currently
92 * registered */
93
94 /*
95 * A chain of XLogRecDatas to hold the "main data" of a WAL record, registered
96 * with XLogRegisterData(...).
97 */
98 static XLogRecData *mainrdata_head;
99 static XLogRecData *mainrdata_last = (XLogRecData *) &mainrdata_head;
100 static uint64 mainrdata_len; /* total # of bytes in chain */
101
102 /* flags for the in-progress insertion */
103 static uint8 curinsert_flags = 0;
104
105 /*
106 * These are used to hold the record header while constructing a record.
107 * 'hdr_scratch' is not a plain variable, but is palloc'd at initialization,
108 * because we want it to be MAXALIGNed and padding bytes zeroed.
109 *
110 * For simplicity, it's allocated large enough to hold the headers for any
111 * WAL record.
112 */
113 static XLogRecData hdr_rdt;
114 static char *hdr_scratch = NULL;
115
116 #define SizeOfXlogOrigin (sizeof(RepOriginId) + sizeof(char))
117 #define SizeOfXLogTransactionId (sizeof(TransactionId) + sizeof(char))
118
119 #define HEADER_SCRATCH_SIZE \
120 (SizeOfXLogRecord + \
121 MaxSizeOfXLogRecordBlockHeader * (XLR_MAX_BLOCK_ID + 1) + \
122 SizeOfXLogRecordDataHeaderLong + SizeOfXlogOrigin + \
123 SizeOfXLogTransactionId)
124
125 /*
126 * An array of XLogRecData structs, to hold registered data.
127 */
128 static XLogRecData *rdatas;
129 static int num_rdatas; /* entries currently used */
130 static int max_rdatas; /* allocated size */
131
132 static bool begininsert_called = false;
133
134 /* Memory context to hold the registered buffer and data references. */
135 static MemoryContext xloginsert_cxt;
136
137 static XLogRecData *XLogRecordAssemble(RmgrId rmid, uint8 info,
138 XLogRecPtr RedoRecPtr, bool doPageWrites,
139 XLogRecPtr *fpw_lsn, int *num_fpi,
140 bool *topxid_included);
141 static bool XLogCompressBackupBlock(const PageData *page, uint16 hole_offset,
142 uint16 hole_length, void *dest, uint16 *dlen);
143
144 /*
145 * Begin constructing a WAL record. This must be called before the
146 * XLogRegister* functions and XLogInsert().
147 */
148 void
149 XLogBeginInsert(void)
150 {
151 Assert(max_registered_block_id == 0);
152 Assert(mainrdata_last == (XLogRecData *) &mainrdata_head);
153 Assert(mainrdata_len == 0);
154
155 /* cross-check on whether we should be here or not */
156 if (!XLogInsertAllowed())
157 elog(ERROR, "cannot make new WAL entries during recovery");
158
159 if (begininsert_called)
160 elog(ERROR, "XLogBeginInsert was already called");
161
162 begininsert_called = true;
163 }
164
165 /*
166 * Ensure that there are enough buffer and data slots in the working area,
167 * for subsequent XLogRegisterBuffer, XLogRegisterData and XLogRegisterBufData
168 * calls.
169 *
170 * There is always space for a small number of buffers and data chunks, enough
171 * for most record types. This function is for the exceptional cases that need
172 * more.
173 */
174 void
175 XLogEnsureRecordSpace(int max_block_id, int ndatas)
176 {
177 int nbuffers;
178
179 /*
180 * This must be called before entering a critical section, because
181 * allocating memory inside a critical section can fail. repalloc() will
182 * check the same, but better to check it here too so that we fail
183 * consistently even if the arrays happen to be large enough already.
184 */
185 Assert(CritSectionCount == 0);
186
187 /* the minimum values can't be decreased */
188 if (max_block_id < XLR_NORMAL_MAX_BLOCK_ID)
189 max_block_id = XLR_NORMAL_MAX_BLOCK_ID;
190 if (ndatas < XLR_NORMAL_RDATAS)
191 ndatas = XLR_NORMAL_RDATAS;
192
193 if (max_block_id > XLR_MAX_BLOCK_ID)
194 elog(ERROR, "maximum number of WAL record block references exceeded");
195 nbuffers = max_block_id + 1;
196
197 if (nbuffers > max_registered_buffers)
198 {
199 registered_buffers = (registered_buffer *)
200 repalloc(registered_buffers, sizeof(registered_buffer) * nbuffers);
201
202 /*
203 * At least the padding bytes in the structs must be zeroed, because
204 * they are included in WAL data, but initialize it all for tidiness.
205 */
206 MemSet(&registered_buffers[max_registered_buffers], 0,
207 (nbuffers - max_registered_buffers) * sizeof(registered_buffer));
208 max_registered_buffers = nbuffers;
209 }
210
211 if (ndatas > max_rdatas)
212 {
213 rdatas = (XLogRecData *) repalloc(rdatas, sizeof(XLogRecData) * ndatas);
214 max_rdatas = ndatas;
215 }
216 }
217
218 /*
219 * Reset WAL record construction buffers.
220 */
221 void
222 XLogResetInsertion(void)
223 {
224 int i;
225
226 for (i = 0; i < max_registered_block_id; i++)
227 registered_buffers[i].in_use = false;
228
229 num_rdatas = 0;
230 max_registered_block_id = 0;
231 mainrdata_len = 0;
232 mainrdata_last = (XLogRecData *) &mainrdata_head;
233 curinsert_flags = 0;
234 begininsert_called = false;
235 }
236
237 /*
238 * Register a reference to a buffer with the WAL record being constructed.
239 * This must be called for every page that the WAL-logged operation modifies.
240 */
241 void
242 XLogRegisterBuffer(uint8 block_id, Buffer buffer, uint8 flags)
243 {
244 registered_buffer *regbuf;
245
246 /* NO_IMAGE doesn't make sense with FORCE_IMAGE */
247 Assert(!((flags & REGBUF_FORCE_IMAGE) && (flags & (REGBUF_NO_IMAGE))));
248 Assert(begininsert_called);
249
250 /*
251 * Ordinarily, buffer should be exclusive-locked and marked dirty before
252 * we get here, otherwise we could end up violating one of the rules in
253 * access/transam/README.
254 *
255 * Some callers intentionally register a clean page and never update that
256 * page's LSN; in that case they can pass the flag REGBUF_NO_CHANGE to
257 * bypass these checks.
258 */
259 #ifdef USE_ASSERT_CHECKING
260 if (!(flags & REGBUF_NO_CHANGE))
261 Assert(BufferIsExclusiveLocked(buffer) && BufferIsDirty(buffer));
262 #endif
263
264 if (block_id >= max_registered_block_id)
265 {
266 if (block_id >= max_registered_buffers)
267 elog(ERROR, "too many registered buffers");
268 max_registered_block_id = block_id + 1;
269 }
270
271 regbuf = &registered_buffers[block_id];
272
273 BufferGetTag(buffer, &regbuf->rlocator, &regbuf->forkno, &regbuf->block);
274 regbuf->page = BufferGetPage(buffer);
275 regbuf->flags = flags;
276 regbuf->rdata_tail = (XLogRecData *) &regbuf->rdata_head;
277 regbuf->rdata_len = 0;
278
279 /*
280 * Check that this page hasn't already been registered with some other
281 * block_id.
282 */
283 #ifdef USE_ASSERT_CHECKING
284 {
285 int i;
286
287 for (i = 0; i < max_registered_block_id; i++)
288 {
289 registered_buffer *regbuf_old = &registered_buffers[i];
290
291 if (i == block_id || !regbuf_old->in_use)
292 continue;
293
294 Assert(!RelFileLocatorEquals(regbuf_old->rlocator, regbuf->rlocator) ||
295 regbuf_old->forkno != regbuf->forkno ||
296 regbuf_old->block != regbuf->block);
297 }
298 }
299 #endif
300
301 regbuf->in_use = true;
302 }
303
304 /*
305 * Like XLogRegisterBuffer, but for registering a block that's not in the
306 * shared buffer pool (i.e. when you don't have a Buffer for it).
307 */
308 void
309 XLogRegisterBlock(uint8 block_id, RelFileLocator *rlocator, ForkNumber forknum,
310 BlockNumber blknum, const PageData *page, uint8 flags)
311 {
312 registered_buffer *regbuf;
313
314 Assert(begininsert_called);
315
316 if (block_id >= max_registered_block_id)
317 max_registered_block_id = block_id + 1;
318
319 if (block_id >= max_registered_buffers)
320 elog(ERROR, "too many registered buffers");
321
322 regbuf = &registered_buffers[block_id];
323
324 regbuf->rlocator = *rlocator;
325 regbuf->forkno = forknum;
326 regbuf->block = blknum;
327 regbuf->page = page;
328 regbuf->flags = flags;
329 regbuf->rdata_tail = (XLogRecData *) &regbuf->rdata_head;
330 regbuf->rdata_len = 0;
331
332 /*
333 * Check that this page hasn't already been registered with some other
334 * block_id.
335 */
336 #ifdef USE_ASSERT_CHECKING
337 {
338 int i;
339
340 for (i = 0; i < max_registered_block_id; i++)
341 {
342 registered_buffer *regbuf_old = &registered_buffers[i];
343
344 if (i == block_id || !regbuf_old->in_use)
345 continue;
346
347 Assert(!RelFileLocatorEquals(regbuf_old->rlocator, regbuf->rlocator) ||
348 regbuf_old->forkno != regbuf->forkno ||
349 regbuf_old->block != regbuf->block);
350 }
351 }
352 #endif
353
354 regbuf->in_use = true;
355 }
356
357 /*
358 * Add data to the WAL record that's being constructed.
359 *
360 * The data is appended to the "main chunk", available at replay with
361 * XLogRecGetData().
362 */
363 void
364 XLogRegisterData(const void *data, uint32 len)
365 {
366 XLogRecData *rdata;
367
368 Assert(begininsert_called);
369
370 if (num_rdatas >= max_rdatas)
371 ereport(ERROR,
372 (errmsg_internal("too much WAL data"),
373 errdetail_internal("%d out of %d data segments are already in use.",
374 num_rdatas, max_rdatas)));
375 rdata = &rdatas[num_rdatas++];
376
377 rdata->data = data;
378 rdata->len = len;
379
380 /*
381 * we use the mainrdata_last pointer to track the end of the chain, so no
382 * need to clear 'next' here.
383 */
384
385 mainrdata_last->next = rdata;
386 mainrdata_last = rdata;
387
388 mainrdata_len += len;
389 }
390
391 /*
392 * Add buffer-specific data to the WAL record that's being constructed.
393 *
394 * Block_id must reference a block previously registered with
395 * XLogRegisterBuffer(). If this is called more than once for the same
396 * block_id, the data is appended.
397 *
398 * The maximum amount of data that can be registered per block is 65535
399 * bytes. That should be plenty; if you need more than BLCKSZ bytes to
400 * reconstruct the changes to the page, you might as well just log a full
401 * copy of it. (the "main data" that's not associated with a block is not
402 * limited)
403 */
404 void
405 XLogRegisterBufData(uint8 block_id, const void *data, uint32 len)
406 {
407 registered_buffer *regbuf;
408 XLogRecData *rdata;
409
410 Assert(begininsert_called);
411
412 /* find the registered buffer struct */
413 regbuf = &registered_buffers[block_id];
414 if (!regbuf->in_use)
415 elog(ERROR, "no block with id %d registered with WAL insertion",
416 block_id);
417
418 /*
419 * Check against max_rdatas and ensure we do not register more data per
420 * buffer than can be handled by the physical data format; i.e. that
421 * regbuf->rdata_len does not grow beyond what
422 * XLogRecordBlockHeader->data_length can hold.
423 */
424 if (num_rdatas >= max_rdatas)
425 ereport(ERROR,
426 (errmsg_internal("too much WAL data"),
427 errdetail_internal("%d out of %d data segments are already in use.",
428 num_rdatas, max_rdatas)));
429 if (regbuf->rdata_len + len > UINT16_MAX || len > UINT16_MAX)
430 ereport(ERROR,
431 (errmsg_internal("too much WAL data"),
432 errdetail_internal("Registering more than maximum %u bytes allowed to block %u: current %u bytes, adding %u bytes.",
433 UINT16_MAX, block_id, regbuf->rdata_len, len)));
434
435 rdata = &rdatas[num_rdatas++];
436
437 rdata->data = data;
438 rdata->len = len;
439
440 regbuf->rdata_tail->next = rdata;
441 regbuf->rdata_tail = rdata;
442 regbuf->rdata_len += len;
443 }
444
445 /*
446 * Set insert status flags for the upcoming WAL record.
447 *
448 * The flags that can be used here are:
449 * - XLOG_INCLUDE_ORIGIN, to determine if the replication origin should be
450 * included in the record.
451 * - XLOG_MARK_UNIMPORTANT, to signal that the record is not important for
452 * durability, which allows to avoid triggering WAL archiving and other
453 * background activity.
454 */
455 void
456 XLogSetRecordFlags(uint8 flags)
457 {
458 Assert(begininsert_called);
459 curinsert_flags |= flags;
460 }
461
462 /*
463 * Insert an XLOG record having the specified RMID and info bytes, with the
464 * body of the record being the data and buffer references registered earlier
465 * with XLogRegister* calls.
466 *
467 * Returns XLOG pointer to end of record (beginning of next record).
468 * This can be used as LSN for data pages affected by the logged action.
469 * (LSN is the XLOG point up to which the XLOG must be flushed to disk
470 * before the data page can be written out. This implements the basic
471 * WAL rule "write the log before the data".)
472 */
473 XLogRecPtr
474 XLogInsert(RmgrId rmid, uint8 info)
475 {
476 XLogRecPtr EndPos;
477
478 /* XLogBeginInsert() must have been called. */
479 if (!begininsert_called)
480 elog(ERROR, "XLogBeginInsert was not called");
481
482 /*
483 * The caller can set rmgr bits, XLR_SPECIAL_REL_UPDATE and
484 * XLR_CHECK_CONSISTENCY; the rest are reserved for use by me.
485 */
486 if ((info & ~(XLR_RMGR_INFO_MASK |
487 XLR_SPECIAL_REL_UPDATE |
488 XLR_CHECK_CONSISTENCY)) != 0)
489 elog(PANIC, "invalid xlog info mask %02X", info);
490
491 TRACE_POSTGRESQL_WAL_INSERT(rmid, info);
492
493 /*
494 * In bootstrap mode, we don't actually log anything but XLOG resources;
495 * return a phony record pointer.
496 */
497 if (IsBootstrapProcessingMode() && rmid != RM_XLOG_ID)
498 {
499 XLogResetInsertion();
500 EndPos = SizeOfXLogLongPHD; /* start of 1st chkpt record */
501 return EndPos;
502 }
503
504 do
505 {
506 XLogRecPtr RedoRecPtr;
507 bool doPageWrites;
508 bool topxid_included = false;
509 XLogRecPtr fpw_lsn;
510 XLogRecData *rdt;
511 int num_fpi = 0;
512
513 /*
514 * Get values needed to decide whether to do full-page writes. Since
515 * we don't yet have an insertion lock, these could change under us,
516 * but XLogInsertRecord will recheck them once it has a lock.
517 */
518 GetFullPageWriteInfo(&RedoRecPtr, &doPageWrites);
519
520 rdt = XLogRecordAssemble(rmid, info, RedoRecPtr, doPageWrites,
521 &fpw_lsn, &num_fpi, &topxid_included);
522
523 EndPos = XLogInsertRecord(rdt, fpw_lsn, curinsert_flags, num_fpi,
524 topxid_included);
525 } while (EndPos == InvalidXLogRecPtr);
526
527 XLogResetInsertion();
528
529 return EndPos;
530 }
531
532 /*
533 * Assemble a WAL record from the registered data and buffers into an
534 * XLogRecData chain, ready for insertion with XLogInsertRecord().
535 *
536 * The record header fields are filled in, except for the xl_prev field. The
537 * calculated CRC does not include the record header yet.
538 *
539 * If there are any registered buffers, and a full-page image was not taken
540 * of all of them, *fpw_lsn is set to the lowest LSN among such pages. This
541 * signals that the assembled record is only good for insertion on the
542 * assumption that the RedoRecPtr and doPageWrites values were up-to-date.
543 *
544 * *topxid_included is set if the topmost transaction ID is logged with the
545 * current subtransaction.
546 */
547 static XLogRecData *
548 XLogRecordAssemble(RmgrId rmid, uint8 info,
549 XLogRecPtr RedoRecPtr, bool doPageWrites,
550 XLogRecPtr *fpw_lsn, int *num_fpi, bool *topxid_included)
551 {
552 XLogRecData *rdt;
553 uint64 total_len = 0;
554 int block_id;
555 pg_crc32c rdata_crc;
556 registered_buffer *prev_regbuf = NULL;
557 XLogRecData *rdt_datas_last;
558 XLogRecord *rechdr;
559 char *scratch = hdr_scratch;
560
561 /*
562 * Note: this function can be called multiple times for the same record.
563 * All the modifications we do to the rdata chains below must handle that.
564 */
565
566 /* The record begins with the fixed-size header */
567 rechdr = (XLogRecord *) scratch;
568 scratch += SizeOfXLogRecord;
569
570 hdr_rdt.next = NULL;
571 rdt_datas_last = &hdr_rdt;
572 hdr_rdt.data = hdr_scratch;
573
574 /*
575 * Enforce consistency checks for this record if user is looking for it.
576 * Do this before at the beginning of this routine to give the possibility
577 * for callers of XLogInsert() to pass XLR_CHECK_CONSISTENCY directly for
578 * a record.
579 */
580 if (wal_consistency_checking[rmid])
581 info |= XLR_CHECK_CONSISTENCY;
582
583 /*
584 * Make an rdata chain containing all the data portions of all block
585 * references. This includes the data for full-page images. Also append
586 * the headers for the block references in the scratch buffer.
587 */
588 *fpw_lsn = InvalidXLogRecPtr;
589 for (block_id = 0; block_id < max_registered_block_id; block_id++)
590 {
591 registered_buffer *regbuf = &registered_buffers[block_id];
592 bool needs_backup;
593 bool needs_data;
594 XLogRecordBlockHeader bkpb;
595 XLogRecordBlockImageHeader bimg;
596 XLogRecordBlockCompressHeader cbimg = {0};
597 bool samerel;
598 bool is_compressed = false;
599 bool include_image;
600
601 if (!regbuf->in_use)
602 continue;
603
604 /* Determine if this block needs to be backed up */
605 if (regbuf->flags & REGBUF_FORCE_IMAGE)
606 needs_backup = true;
607 else if (regbuf->flags & REGBUF_NO_IMAGE)
608 needs_backup = false;
609 else if (!doPageWrites)
610 needs_backup = false;
611 else
612 {
613 /*
614 * We assume page LSN is first data on *every* page that can be
615 * passed to XLogInsert, whether it has the standard page layout
616 * or not.
617 */
618 XLogRecPtr page_lsn = PageGetLSN(regbuf->page);
619
620 needs_backup = (page_lsn <= RedoRecPtr);
621 if (!needs_backup)
622 {
623 if (*fpw_lsn == InvalidXLogRecPtr || page_lsn < *fpw_lsn)
624 *fpw_lsn = page_lsn;
625 }
626 }
627
628 /* Determine if the buffer data needs to included */
629 if (regbuf->rdata_len == 0)
630 needs_data = false;
631 else if ((regbuf->flags & REGBUF_KEEP_DATA) != 0)
632 needs_data = true;
633 else
634 needs_data = !needs_backup;
635
636 bkpb.id = block_id;
637 bkpb.fork_flags = regbuf->forkno;
638 bkpb.data_length = 0;
639
640 if ((regbuf->flags & REGBUF_WILL_INIT) == REGBUF_WILL_INIT)
641 bkpb.fork_flags |= BKPBLOCK_WILL_INIT;
642
643 /*
644 * If needs_backup is true or WAL checking is enabled for current
645 * resource manager, log a full-page write for the current block.
646 */
647 include_image = needs_backup || (info & XLR_CHECK_CONSISTENCY) != 0;
648
649 if (include_image)
650 {
651 const PageData *page = regbuf->page;
652 uint16 compressed_len = 0;
653
654 /*
655 * The page needs to be backed up, so calculate its hole length
656 * and offset.
657 */
658 if (regbuf->flags & REGBUF_STANDARD)
659 {
660 /* Assume we can omit data between pd_lower and pd_upper */
661 uint16 lower = ((PageHeader) page)->pd_lower;
662 uint16 upper = ((PageHeader) page)->pd_upper;
663
664 if (lower >= SizeOfPageHeaderData &&
665 upper > lower &&
666 upper <= BLCKSZ)
667 {
668 bimg.hole_offset = lower;
669 cbimg.hole_length = upper - lower;
670 }
671 else
672 {
673 /* No "hole" to remove */
674 bimg.hole_offset = 0;
675 cbimg.hole_length = 0;
676 }
677 }
678 else
679 {
680 /* Not a standard page header, don't try to eliminate "hole" */
681 bimg.hole_offset = 0;
682 cbimg.hole_length = 0;
683 }
684
685 /*
686 * Try to compress a block image if wal_compression is enabled
687 */
688 if (wal_compression != WAL_COMPRESSION_NONE)
689 {
690 is_compressed =
691 XLogCompressBackupBlock(page, bimg.hole_offset,
692 cbimg.hole_length,
693 regbuf->compressed_page,
694 &compressed_len);
695 }
696
697 /*
698 * Fill in the remaining fields in the XLogRecordBlockHeader
699 * struct
700 */
701 bkpb.fork_flags |= BKPBLOCK_HAS_IMAGE;
702
703 /* Report a full page image constructed for the WAL record */
704 *num_fpi += 1;
705
706 /*
707 * Construct XLogRecData entries for the page content.
708 */
709 rdt_datas_last->next = &regbuf->bkp_rdatas[0];
710 rdt_datas_last = rdt_datas_last->next;
711
712 bimg.bimg_info = (cbimg.hole_length == 0) ? 0 : BKPIMAGE_HAS_HOLE;
713
714 /*
715 * If WAL consistency checking is enabled for the resource manager
716 * of this WAL record, a full-page image is included in the record
717 * for the block modified. During redo, the full-page is replayed
718 * only if BKPIMAGE_APPLY is set.
719 */
720 if (needs_backup)
721 bimg.bimg_info |= BKPIMAGE_APPLY;
722
723 if (is_compressed)
724 {
725 /* The current compression is stored in the WAL record */
726 bimg.length = compressed_len;
727
728 /* Set the compression method used for this block */
729 switch ((WalCompression) wal_compression)
730 {
731 case WAL_COMPRESSION_PGLZ:
732 bimg.bimg_info |= BKPIMAGE_COMPRESS_PGLZ;
733 break;
734
735 case WAL_COMPRESSION_LZ4:
736 #ifdef USE_LZ4
737 bimg.bimg_info |= BKPIMAGE_COMPRESS_LZ4;
738 #else
739 elog(ERROR, "LZ4 is not supported by this build");
740 #endif
741 break;
742
743 case WAL_COMPRESSION_ZSTD:
744 #ifdef USE_ZSTD
745 bimg.bimg_info |= BKPIMAGE_COMPRESS_ZSTD;
746 #else
747 elog(ERROR, "zstd is not supported by this build");
748 #endif
749 break;
750
751 case WAL_COMPRESSION_NONE:
752 Assert(false); /* cannot happen */
753 break;
754 /* no default case, so that compiler will warn */
755 }
756
757 rdt_datas_last->data = regbuf->compressed_page;
758 rdt_datas_last->len = compressed_len;
759 }
760 else
761 {
762 bimg.length = BLCKSZ - cbimg.hole_length;
763
764 if (cbimg.hole_length == 0)
765 {
766 rdt_datas_last->data = page;
767 rdt_datas_last->len = BLCKSZ;
768 }
769 else
770 {
771 /* must skip the hole */
772 rdt_datas_last->data = page;
773 rdt_datas_last->len = bimg.hole_offset;
774
775 rdt_datas_last->next = &regbuf->bkp_rdatas[1];
776 rdt_datas_last = rdt_datas_last->next;
777
778 rdt_datas_last->data =
779 page + (bimg.hole_offset + cbimg.hole_length);
780 rdt_datas_last->len =
781 BLCKSZ - (bimg.hole_offset + cbimg.hole_length);
782 }
783 }
784
785 total_len += bimg.length;
786 }
787
788 if (needs_data)
789 {
790 /*
791 * When copying to XLogRecordBlockHeader, the length is narrowed
792 * to an uint16. Double-check that it is still correct.
793 */
794 Assert(regbuf->rdata_len <= UINT16_MAX);
795
796 /*
797 * Link the caller-supplied rdata chain for this buffer to the
798 * overall list.
799 */
800 bkpb.fork_flags |= BKPBLOCK_HAS_DATA;
801 bkpb.data_length = (uint16) regbuf->rdata_len;
802 total_len += regbuf->rdata_len;
803
804 rdt_datas_last->next = regbuf->rdata_head;
805 rdt_datas_last = regbuf->rdata_tail;
806 }
807
808 if (prev_regbuf && RelFileLocatorEquals(regbuf->rlocator, prev_regbuf->rlocator))
809 {
810 samerel = true;
811 bkpb.fork_flags |= BKPBLOCK_SAME_REL;
812 }
813 else
814 samerel = false;
815 prev_regbuf = regbuf;
816
817 /* Ok, copy the header to the scratch buffer */
818 memcpy(scratch, &bkpb, SizeOfXLogRecordBlockHeader);
819 scratch += SizeOfXLogRecordBlockHeader;
820 if (include_image)
821 {
822 memcpy(scratch, &bimg, SizeOfXLogRecordBlockImageHeader);
823 scratch += SizeOfXLogRecordBlockImageHeader;
824 if (cbimg.hole_length != 0 && is_compressed)
825 {
826 memcpy(scratch, &cbimg,
827 SizeOfXLogRecordBlockCompressHeader);
828 scratch += SizeOfXLogRecordBlockCompressHeader;
829 }
830 }
831 if (!samerel)
832 {
833 memcpy(scratch, &regbuf->rlocator, sizeof(RelFileLocator));
834 scratch += sizeof(RelFileLocator);
835 }
836 memcpy(scratch, &regbuf->block, sizeof(BlockNumber));
837 scratch += sizeof(BlockNumber);
838 }
839
840 /* followed by the record's origin, if any */
841 if ((curinsert_flags & XLOG_INCLUDE_ORIGIN) &&
842 replorigin_session_origin != InvalidRepOriginId)
843 {
844 *(scratch++) = (char) XLR_BLOCK_ID_ORIGIN;
845 memcpy(scratch, &replorigin_session_origin, sizeof(replorigin_session_origin));
846 scratch += sizeof(replorigin_session_origin);
847 }
848
849 /* followed by toplevel XID, if not already included in previous record */
850 if (IsSubxactTopXidLogPending())
851 {
852 TransactionId xid = GetTopTransactionIdIfAny();
853
854 /* Set the flag that the top xid is included in the WAL */
855 *topxid_included = true;
856
857 *(scratch++) = (char) XLR_BLOCK_ID_TOPLEVEL_XID;
858 memcpy(scratch, &xid, sizeof(TransactionId));
859 scratch += sizeof(TransactionId);
860 }
861
862 /* followed by main data, if any */
863 if (mainrdata_len > 0)
864 {
865 if (mainrdata_len > 255)
866 {
867 uint32 mainrdata_len_4b;
868
869 if (mainrdata_len > PG_UINT32_MAX)
870 ereport(ERROR,
871 (errmsg_internal("too much WAL data"),
872 errdetail_internal("Main data length is %" PRIu64 " bytes for a maximum of %u bytes.",
873 mainrdata_len,
874 PG_UINT32_MAX)));
875
876 mainrdata_len_4b = (uint32) mainrdata_len;
877 *(scratch++) = (char) XLR_BLOCK_ID_DATA_LONG;
878 memcpy(scratch, &mainrdata_len_4b, sizeof(uint32));
879 scratch += sizeof(uint32);
880 }
881 else
882 {
883 *(scratch++) = (char) XLR_BLOCK_ID_DATA_SHORT;
884 *(scratch++) = (uint8) mainrdata_len;
885 }
886 rdt_datas_last->next = mainrdata_head;
887 rdt_datas_last = mainrdata_last;
888 total_len += mainrdata_len;
889 }
890 rdt_datas_last->next = NULL;
891
892 hdr_rdt.len = (scratch - hdr_scratch);
893 total_len += hdr_rdt.len;
894
895 /*
896 * Calculate CRC of the data
897 *
898 * Note that the record header isn't added into the CRC initially since we
899 * don't know the prev-link yet. Thus, the CRC will represent the CRC of
900 * the whole record in the order: rdata, then backup blocks, then record
901 * header.
902 */
903 INIT_CRC32C(rdata_crc);
904 COMP_CRC32C(rdata_crc, hdr_scratch + SizeOfXLogRecord, hdr_rdt.len - SizeOfXLogRecord);
905 for (rdt = hdr_rdt.next; rdt != NULL; rdt = rdt->next)
906 COMP_CRC32C(rdata_crc, rdt->data, rdt->len);
907
908 /*
909 * Ensure that the XLogRecord is not too large.
910 *
911 * XLogReader machinery is only able to handle records up to a certain
912 * size (ignoring machine resource limitations), so make sure that we will
913 * not emit records larger than the sizes advertised to be supported.
914 */
915 if (total_len > XLogRecordMaxSize)
916 ereport(ERROR,
917 (errmsg_internal("oversized WAL record"),
918 errdetail_internal("WAL record would be %" PRIu64 " bytes (of maximum %u bytes); rmid %u flags %u.",
919 total_len, XLogRecordMaxSize, rmid, info)));
920
921 /*
922 * Fill in the fields in the record header. Prev-link is filled in later,
923 * once we know where in the WAL the record will be inserted. The CRC does
924 * not include the record header yet.
925 */
926 rechdr->xl_xid = GetCurrentTransactionIdIfAny();
927 rechdr->xl_tot_len = (uint32) total_len;
928 rechdr->xl_info = info;
929 rechdr->xl_rmid = rmid;
930 rechdr->xl_prev = InvalidXLogRecPtr;
931 rechdr->xl_crc = rdata_crc;
932
933 return &hdr_rdt;
934 }
935
936 /*
937 * Create a compressed version of a backup block image.
938 *
939 * Returns false if compression fails (i.e., compressed result is actually
940 * bigger than original). Otherwise, returns true and sets 'dlen' to
941 * the length of compressed block image.
942 */
943 static bool
944 XLogCompressBackupBlock(const PageData *page, uint16 hole_offset, uint16 hole_length,
945 void *dest, uint16 *dlen)
946 {
947 int32 orig_len = BLCKSZ - hole_length;
948 int32 len = -1;
949 int32 extra_bytes = 0;
950 const void *source;
951 PGAlignedBlock tmp;
952
953 if (hole_length != 0)
954 {
955 /* must skip the hole */
956 memcpy(tmp.data, page, hole_offset);
957 memcpy(tmp.data + hole_offset,
958 page + (hole_offset + hole_length),
959 BLCKSZ - (hole_length + hole_offset));
960 source = tmp.data;
961
962 /*
963 * Extra data needs to be stored in WAL record for the compressed
964 * version of block image if the hole exists.
965 */
966 extra_bytes = SizeOfXLogRecordBlockCompressHeader;
967 }
968 else
969 source = page;
970
971 switch ((WalCompression) wal_compression)
972 {
973 case WAL_COMPRESSION_PGLZ:
974 len = pglz_compress(source, orig_len, dest, PGLZ_strategy_default);
975 break;
976
977 case WAL_COMPRESSION_LZ4:
978 #ifdef USE_LZ4
979 len = LZ4_compress_default(source, dest, orig_len,
980 COMPRESS_BUFSIZE);
981 if (len <= 0)
982 len = -1; /* failure */
983 #else
984 elog(ERROR, "LZ4 is not supported by this build");
985 #endif
986 break;
987
988 case WAL_COMPRESSION_ZSTD:
989 #ifdef USE_ZSTD
990 len = ZSTD_compress(dest, COMPRESS_BUFSIZE, source, orig_len,
991 ZSTD_CLEVEL_DEFAULT);
992 if (ZSTD_isError(len))
993 len = -1; /* failure */
994 #else
995 elog(ERROR, "zstd is not supported by this build");
996 #endif
997 break;
998
999 case WAL_COMPRESSION_NONE:
1000 Assert(false); /* cannot happen */
1001 break;
1002 /* no default case, so that compiler will warn */
1003 }
1004
1005 /*
1006 * We recheck the actual size even if compression reports success and see
1007 * if the number of bytes saved by compression is larger than the length
1008 * of extra data needed for the compressed version of block image.
1009 */
1010 if (len >= 0 &&
1011 len + extra_bytes < orig_len)
1012 {
1013 *dlen = (uint16) len; /* successful compression */
1014 return true;
1015 }
1016 return false;
1017 }
1018
1019 /*
1020 * Determine whether the buffer referenced has to be backed up.
1021 *
1022 * Since we don't yet have the insert lock, fullPageWrites and runningBackups
1023 * (which forces full-page writes) could change later, so the result should
1024 * be used for optimization purposes only.
1025 */
1026 bool
1027 XLogCheckBufferNeedsBackup(Buffer buffer)
1028 {
1029 XLogRecPtr RedoRecPtr;
1030 bool doPageWrites;
1031 Page page;
1032
1033 GetFullPageWriteInfo(&RedoRecPtr, &doPageWrites);
1034
1035 page = BufferGetPage(buffer);
1036
1037 if (doPageWrites && PageGetLSN(page) <= RedoRecPtr)
1038 return true; /* buffer requires backup */
1039
1040 return false; /* buffer does not need to be backed up */
1041 }
1042
1043 /*
1044 * Write a backup block if needed when we are setting a hint. Note that
1045 * this may be called for a variety of page types, not just heaps.
1046 *
1047 * Callable while holding just share lock on the buffer content.
1048 *
1049 * We can't use the plain backup block mechanism since that relies on the
1050 * Buffer being exclusively locked. Since some modifications (setting LSN, hint
1051 * bits) are allowed in a sharelocked buffer that can lead to wal checksum
1052 * failures. So instead we copy the page and insert the copied data as normal
1053 * record data.
1054 *
1055 * We only need to do something if page has not yet been full page written in
1056 * this checkpoint round. The LSN of the inserted wal record is returned if we
1057 * had to write, InvalidXLogRecPtr otherwise.
1058 *
1059 * It is possible that multiple concurrent backends could attempt to write WAL
1060 * records. In that case, multiple copies of the same block would be recorded
1061 * in separate WAL records by different backends, though that is still OK from
1062 * a correctness perspective.
1063 */
1064 XLogRecPtr
1065 XLogSaveBufferForHint(Buffer buffer, bool buffer_std)
1066 {
1067 XLogRecPtr recptr = InvalidXLogRecPtr;
1068 XLogRecPtr lsn;
1069 XLogRecPtr RedoRecPtr;
1070
1071 /*
1072 * Ensure no checkpoint can change our view of RedoRecPtr.
1073 */
1074 Assert((MyProc->delayChkptFlags & DELAY_CHKPT_START) != 0);
1075
1076 /*
1077 * Update RedoRecPtr so that we can make the right decision
1078 */
1079 RedoRecPtr = GetRedoRecPtr();
1080
1081 /*
1082 * We assume page LSN is first data on *every* page that can be passed to
1083 * XLogInsert, whether it has the standard page layout or not. Since we're
1084 * only holding a share-lock on the page, we must take the buffer header
1085 * lock when we look at the LSN.
1086 */
1087 lsn = BufferGetLSNAtomic(buffer);
1088
1089 if (lsn <= RedoRecPtr)
1090 {
1091 int flags = 0;
1092 PGAlignedBlock copied_buffer;
1093 char *origdata = (char *) BufferGetBlock(buffer);
1094 RelFileLocator rlocator;
1095 ForkNumber forkno;
1096 BlockNumber blkno;
1097
1098 /*
1099 * Copy buffer so we don't have to worry about concurrent hint bit or
1100 * lsn updates. We assume pd_lower/upper cannot be changed without an
1101 * exclusive lock, so the contents bkp are not racy.
1102 */
1103 if (buffer_std)
1104 {
1105 /* Assume we can omit data between pd_lower and pd_upper */
1106 Page page = BufferGetPage(buffer);
1107 uint16 lower = ((PageHeader) page)->pd_lower;
1108 uint16 upper = ((PageHeader) page)->pd_upper;
1109
1110 memcpy(copied_buffer.data, origdata, lower);
1111 memcpy(copied_buffer.data + upper, origdata + upper, BLCKSZ - upper);
1112 }
1113 else
1114 memcpy(copied_buffer.data, origdata, BLCKSZ);
1115
1116 XLogBeginInsert();
1117
1118 if (buffer_std)
1119 flags |= REGBUF_STANDARD;
1120
1121 BufferGetTag(buffer, &rlocator, &forkno, &blkno);
1122 XLogRegisterBlock(0, &rlocator, forkno, blkno, copied_buffer.data, flags);
1123
1124 recptr = XLogInsert(RM_XLOG_ID, XLOG_FPI_FOR_HINT);
1125 }
1126
1127 return recptr;
1128 }
1129
1130 /*
1131 * Write a WAL record containing a full image of a page. Caller is responsible
1132 * for writing the page to disk after calling this routine.
1133 *
1134 * Note: If you're using this function, you should be building pages in private
1135 * memory and writing them directly to smgr. If you're using buffers, call
1136 * log_newpage_buffer instead.
1137 *
1138 * If the page follows the standard page layout, with a PageHeader and unused
1139 * space between pd_lower and pd_upper, set 'page_std' to true. That allows
1140 * the unused space to be left out from the WAL record, making it smaller.
1141 */
1142 XLogRecPtr
1143 log_newpage(RelFileLocator *rlocator, ForkNumber forknum, BlockNumber blkno,
1144 Page page, bool page_std)
1145 {
1146 int flags;
1147 XLogRecPtr recptr;
1148
1149 flags = REGBUF_FORCE_IMAGE;
1150 if (page_std)
1151 flags |= REGBUF_STANDARD;
1152
1153 XLogBeginInsert();
1154 XLogRegisterBlock(0, rlocator, forknum, blkno, page, flags);
1155 recptr = XLogInsert(RM_XLOG_ID, XLOG_FPI);
1156
1157 /*
1158 * The page may be uninitialized. If so, we can't set the LSN because that
1159 * would corrupt the page.
1160 */
1161 if (!PageIsNew(page))
1162 {
1163 PageSetLSN(page, recptr);
1164 }
1165
1166 return recptr;
1167 }
1168
1169 /*
1170 * Like log_newpage(), but allows logging multiple pages in one operation.
1171 * It is more efficient than calling log_newpage() for each page separately,
1172 * because we can write multiple pages in a single WAL record.
1173 */
1174 void
1175 log_newpages(RelFileLocator *rlocator, ForkNumber forknum, int num_pages,
1176 BlockNumber *blknos, Page *pages, bool page_std)
1177 {
1178 int flags;
1179 XLogRecPtr recptr;
1180 int i;
1181 int j;
1182
1183 flags = REGBUF_FORCE_IMAGE;
1184 if (page_std)
1185 flags |= REGBUF_STANDARD;
1186
1187 /*
1188 * Iterate over all the pages. They are collected into batches of
1189 * XLR_MAX_BLOCK_ID pages, and a single WAL-record is written for each
1190 * batch.
1191 */
1192 XLogEnsureRecordSpace(XLR_MAX_BLOCK_ID - 1, 0);
1193
1194 i = 0;
1195 while (i < num_pages)
1196 {
1197 int batch_start = i;
1198 int nbatch;
1199
1200 XLogBeginInsert();
1201
1202 nbatch = 0;
1203 while (nbatch < XLR_MAX_BLOCK_ID && i < num_pages)
1204 {
1205 XLogRegisterBlock(nbatch, rlocator, forknum, blknos[i], pages[i], flags);
1206 i++;
1207 nbatch++;
1208 }
1209
1210 recptr = XLogInsert(RM_XLOG_ID, XLOG_FPI);
1211
1212 for (j = batch_start; j < i; j++)
1213 {
1214 /*
1215 * The page may be uninitialized. If so, we can't set the LSN
1216 * because that would corrupt the page.
1217 */
1218 if (!PageIsNew(pages[j]))
1219 {
1220 PageSetLSN(pages[j], recptr);
1221 }
1222 }
1223 }
1224 }
1225
1226 /*
1227 * Write a WAL record containing a full image of a page.
1228 *
1229 * Caller should initialize the buffer and mark it dirty before calling this
1230 * function. This function will set the page LSN.
1231 *
1232 * If the page follows the standard page layout, with a PageHeader and unused
1233 * space between pd_lower and pd_upper, set 'page_std' to true. That allows
1234 * the unused space to be left out from the WAL record, making it smaller.
1235 */
1236 XLogRecPtr
1237 log_newpage_buffer(Buffer buffer, bool page_std)
1238 {
1239 Page page = BufferGetPage(buffer);
1240 RelFileLocator rlocator;
1241 ForkNumber forknum;
1242 BlockNumber blkno;
1243
1244 /* Shared buffers should be modified in a critical section. */
1245 Assert(CritSectionCount > 0);
1246
1247 BufferGetTag(buffer, &rlocator, &forknum, &blkno);
1248
1249 return log_newpage(&rlocator, forknum, blkno, page, page_std);
1250 }
1251
1252 /*
1253 * WAL-log a range of blocks in a relation.
1254 *
1255 * An image of all pages with block numbers 'startblk' <= X < 'endblk' is
1256 * written to the WAL. If the range is large, this is done in multiple WAL
1257 * records.
1258 *
1259 * If all page follows the standard page layout, with a PageHeader and unused
1260 * space between pd_lower and pd_upper, set 'page_std' to true. That allows
1261 * the unused space to be left out from the WAL records, making them smaller.
1262 *
1263 * NOTE: This function acquires exclusive-locks on the pages. Typically, this
1264 * is used on a newly-built relation, and the caller is holding a
1265 * AccessExclusiveLock on it, so no other backend can be accessing it at the
1266 * same time. If that's not the case, you must ensure that this does not
1267 * cause a deadlock through some other means.
1268 */
1269 void
1270 log_newpage_range(Relation rel, ForkNumber forknum,
1271 BlockNumber startblk, BlockNumber endblk,
1272 bool page_std)
1273 {
1274 int flags;
1275 BlockNumber blkno;
1276
1277 flags = REGBUF_FORCE_IMAGE;
1278 if (page_std)
1279 flags |= REGBUF_STANDARD;
1280
1281 /*
1282 * Iterate over all the pages in the range. They are collected into
1283 * batches of XLR_MAX_BLOCK_ID pages, and a single WAL-record is written
1284 * for each batch.
1285 */
1286 XLogEnsureRecordSpace(XLR_MAX_BLOCK_ID - 1, 0);
1287
1288 blkno = startblk;
1289 while (blkno < endblk)
1290 {
1291 Buffer bufpack[XLR_MAX_BLOCK_ID];
1292 XLogRecPtr recptr;
1293 int nbufs;
1294 int i;
1295
1296 CHECK_FOR_INTERRUPTS();
1297
1298 /* Collect a batch of blocks. */
1299 nbufs = 0;
1300 while (nbufs < XLR_MAX_BLOCK_ID && blkno < endblk)
1301 {
1302 Buffer buf = ReadBufferExtended(rel, forknum, blkno,
1303 RBM_NORMAL, NULL);
1304
1305 LockBuffer(buf, BUFFER_LOCK_EXCLUSIVE);
1306
1307 /*
1308 * Completely empty pages are not WAL-logged. Writing a WAL record
1309 * would change the LSN, and we don't want that. We want the page
1310 * to stay empty.
1311 */
1312 if (!PageIsNew(BufferGetPage(buf)))
1313 bufpack[nbufs++] = buf;
1314 else
1315 UnlockReleaseBuffer(buf);
1316 blkno++;
1317 }
1318
1319 /* Nothing more to do if all remaining blocks were empty. */
1320 if (nbufs == 0)
1321 break;
1322
1323 /* Write WAL record for this batch. */
1324 XLogBeginInsert();
1325
1326 START_CRIT_SECTION();
1327 for (i = 0; i < nbufs; i++)
1328 {
1329 MarkBufferDirty(bufpack[i]);
1330 XLogRegisterBuffer(i, bufpack[i], flags);
1331 }
1332
1333 recptr = XLogInsert(RM_XLOG_ID, XLOG_FPI);
1334
1335 for (i = 0; i < nbufs; i++)
1336 {
1337 PageSetLSN(BufferGetPage(bufpack[i]), recptr);
1338 UnlockReleaseBuffer(bufpack[i]);
1339 }
1340 END_CRIT_SECTION();
1341 }
1342 }
1343
1344 /*
1345 * Allocate working buffers needed for WAL record construction.
1346 */
1347 void
1348 InitXLogInsert(void)
1349 {
1350 #ifdef USE_ASSERT_CHECKING
1351
1352 /*
1353 * Check that any records assembled can be decoded. This is capped based
1354 * on what XLogReader would require at its maximum bound. The XLOG_BLCKSZ
1355 * addend covers the larger allocate_recordbuf() demand. This code path
1356 * is called once per backend, more than enough for this check.
1357 */
1358 size_t max_required =
1359 DecodeXLogRecordRequiredSpace(XLogRecordMaxSize + XLOG_BLCKSZ);
1360
1361 Assert(AllocSizeIsValid(max_required));
1362 #endif
1363
1364 /* Initialize the working areas */
1365 if (xloginsert_cxt == NULL)
1366 {
1367 xloginsert_cxt = AllocSetContextCreate(TopMemoryContext,
1368 "WAL record construction",
1369 ALLOCSET_DEFAULT_SIZES);
1370 }
1371
1372 if (registered_buffers == NULL)
1373 {
1374 registered_buffers = (registered_buffer *)
1375 MemoryContextAllocZero(xloginsert_cxt,
1376 sizeof(registered_buffer) * (XLR_NORMAL_MAX_BLOCK_ID + 1));
1377 max_registered_buffers = XLR_NORMAL_MAX_BLOCK_ID + 1;
1378 }
1379 if (rdatas == NULL)
1380 {
1381 rdatas = MemoryContextAlloc(xloginsert_cxt,
1382 sizeof(XLogRecData) * XLR_NORMAL_RDATAS);
1383 max_rdatas = XLR_NORMAL_RDATAS;
1384 }
1385
1386 /*
1387 * Allocate a buffer to hold the header information for a WAL record.
1388 */
1389 if (hdr_scratch == NULL)
1390 hdr_scratch = MemoryContextAllocZero(xloginsert_cxt,
1391 HEADER_SCRATCH_SIZE);
1392 }