Debian Codegraph @

Cross/Makefile-cross-SH

raw
1 #! /bin/sh
2
3 # This file is used to create generic Makefile for cross-compile
4 # (borrowed from Makefile.SH)
5 # (now only small changes are done to establish cross-compilation)
6 # miniperl removed from here, as this is built on HOST
7
8 Makefile=Makefile-cross-$CROSS_NAME
9
10 . Cross/config-${CROSS_NAME}.sh
11
12 # H.Merijn Brand [17 Feb 2004]
13 # This comment is just to ensure that Configure will find variables that
14 # are removed/replaced in patches on blead, but are still needed in the
15 # 5.8.x, 5.6.x and 5.005.x maintenance tracks.
16 # metaconfig -m will scan all .SH files on this level (not deeper), and
17 # not in other subfolders. This file is as good as any .SH
18 # patch references
19 # #22227 $baserev
20 # #22302 $yacc $byacc
21
22 # H.Merijn Brand [30 Oct 2004]
23 # Mentioned for the same reason for future reference
24 # #23434 $d_strlcat $d_strlcpy
25
26 : This forces SH files to create target in same directory as SH file.
27 : This is so that make depend always knows where to find SH derivatives.
28 case "$0" in
29 */*) cd `expr X$0 : 'X\(.*\)/'` ;;
30 esac
31
32 linklibperl='$(LIBPERL)'
33 shrpldflags='$(LDDLFLAGS)'
34 ldlibpth=''
35 DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
36 case "$useshrplib" in
37 true)
38 # Prefix all runs of 'miniperl' and 'perl' with
39 # $ldlibpth so that ./perl finds *this* shared libperl.
40 case "$LD_LIBRARY_PATH" in
41 '')
42 ldlibpth="LD_LIBRARY_PATH=`pwd`";;
43 *)
44 ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";;
45 esac
46
47 pldlflags="$cccdlflags"
48 static_ldflags=''
49 case "${osname}${osvers}" in
50 darwin*)
51 shrpldflags="${ldflags} -dynamiclib \
52 -compatibility_version \
53 ${api_revision}.${api_version}.${api_subversion} \
54 -current_version \
55 ${revision}.${patchlevel}.${subversion} \
56 -install_name \$(shrpdir)/\$@"
57 ;;
58 cygwin*)
59 linklibperl="-lperl"
60 ;;
61 sunos*)
62 linklibperl="-lperl"
63 ;;
64 netbsd*|freebsd[234]*|openbsd*|dragonfly*|bitrig*)
65 linklibperl="-L. -lperl"
66 ;;
67 interix*)
68 linklibperl="-L. -lperl"
69 shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
70 ;;
71 linux*)
72 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
73 ;;
74 aix*)
75 shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
76 case "$osvers" in
77 3*) shrpldflags="$shrpldflags -e _nostart"
78 ;;
79 *) shrpldflags="$shrpldflags -b noentry"
80 ;;
81 esac
82 shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
83 linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
84 ;;
85 hpux*)
86 linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
87 ;;
88 os390*)
89 shrpldflags='-W l,XPLINK,dll'
90 linklibperl='libperl.x'
91 DPERL_EXTERNAL_GLOB=''
92 ;;
93 esac
94 case "$ldlibpthname" in
95 '') ;;
96 *)
97 case "$osname" in
98 os2)
99 ldlibpth=''
100 ;;
101 *)
102 eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
103 ;;
104 esac
105 # Strip off any trailing :'s
106 ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
107 ;;
108 esac
109
110 case "$ldlibpth" in
111 # Protect any spaces
112 *" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
113 esac
114
115 case "$osname" in
116 linux)
117 # If there is a pre-existing $libperl from a previous
118 # installation, Linux needs to use LD_PRELOAD to
119 # override the LD_LIBRARY_PATH setting. See the
120 # INSTALL file, under "Building a shared perl library".
121 # If there is no pre-existing $libperl, we don't need
122 # to do anything further.
123 if test -f $archlib/CORE/$libperl; then
124 rm -f preload
125 cat <<'EOT' > preload
126 #! /bin/sh
127 lib=$1
128 shift
129 test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
130 exec "$@"
131 EOT
132 chmod 755 preload
133 ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
134 fi
135 ;;
136 os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
137 ;;
138 esac
139
140 ;;
141
142 *) pldlflags=''
143 static_ldflags='CCCDLFLAGS='
144 ;;
145 esac
146
147 : Prepare dependency lists for Makefile.
148 dynamic_list=' '
149 extra_dep=''
150 for f in $dynamic_ext; do
151 : the dependency named here will never exist
152 base=`echo "$f" | sed 's/.*\///'`
153 this_target="lib/auto/$f/$base.$dlext"
154 dynamic_list="$dynamic_list $this_target"
155
156 : Parallel makes reveal that we have some interdependencies
157 case $f in
158 Math/BigInt/FastCalc) extra_dep="$extra_dep
159 $this_target: lib/auto/List/Util/Util.$dlext" ;;
160 Unicode/Normalize) extra_dep="$extra_dep
161 $this_target: uni.data" ;;
162 esac
163 done
164
165 static_list=' '
166 for f in $static_ext; do
167 base=`echo "$f" | sed 's/.*\///'`
168 static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
169 done
170
171 nonxs_list=' '
172 for f in $nonxs_ext; do
173 base=`echo "$f" | sed 's/.*\///'`
174 nonxs_list="$nonxs_list ext/$f/pm_to_blib"
175 done
176
177 echo "Extracting $Makefile (with variable substitutions)"
178 $spitshell >$Makefile <<!GROK!THIS!
179 # $Makefile.SH
180 # This file is derived from $Makefile.SH. Any changes made here will
181 # be lost the next time you run Configure.
182 # $Makefile is used to generate $firstmakefile. The only difference
183 # is that $firstmakefile has the dependencies filled in at the end.
184
185 CC = $cc
186 LD = $ld
187
188 LDFLAGS = $ldflags
189 CLDFLAGS = $ldflags
190
191 mallocsrc = $mallocsrc
192 mallocobj = $mallocobj
193 LNS = $lns
194 # NOTE: some systems don't grok "cp -f". XXX Configure test needed?
195 CPS = $cp
196 RMS = rm -f
197 ranlib = $ranlib
198
199 # The following are mentioned only to make metaconfig include the
200 # appropriate questions in Configure. If you want to change these,
201 # edit config.sh instead, or specify --man1dir=/wherever on
202 # installman commandline.
203 bin = $installbin
204 scriptdir = $scriptdir
205 shrpdir = $archlibexp/CORE
206 privlib = $installprivlib
207 man1dir = $man1dir
208 man1ext = $man1ext
209 man3dir = $man3dir
210 man3ext = $man3ext
211
212 # The following are used to build and install shared libraries for
213 # dynamic loading.
214 LDDLFLAGS = $lddlflags
215 SHRPLDFLAGS = $shrpldflags
216 CCDLFLAGS = $ccdlflags
217 DLSUFFIX = .$dlext
218 PLDLFLAGS = $pldlflags
219 LIBPERL = $libperl
220 LLIBPERL= $linklibperl
221 SHRPENV = $shrpenv
222
223 # Static targets are ordinarily built without CCCDLFLAGS. However,
224 # if building a shared libperl.so that might later be linked into
225 # another application, then it might be appropriate to also build static
226 # extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
227 # for GNU cc).
228 STATIC_LDFLAGS = $static_ldflags
229
230 # The following is used to include the current directory in
231 # the dynamic loader path you are building a shared libperl.
232 LDLIBPTH = $ldlibpth
233
234 dynamic_ext = $dynamic_list
235 static_ext = $static_list
236 nonxs_ext = $nonxs_list
237 ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
238 DYNALOADER = DynaLoader\$(OBJ_EXT)
239
240 libs = $perllibs $cryptlib
241
242 public = perl\$(EXE_EXT) utilities translators
243
244 shellflags = $shellflags
245
246 # This is set to MAKE=$make if your $make command doesn't
247 # do it for you.
248 $make_set_make
249
250 # Mention $gmake here so it gets probed for by Configure.
251
252 # These variables may need to be manually set for non-Unix systems.
253 AR = $full_ar
254 EXE_EXT = $_exe
255 LIB_EXT = $_a
256 OBJ_EXT = $_o
257 PATH_SEP = $p_
258
259 # If you're going to use valgrind and it can't be invoked as plain valgrind
260 # then you'll need to change this, or override it on the make command line.
261 VALGRIND=valgrind
262
263 FIRSTMAKEFILE = $firstmakefile
264
265 # Any special object files needed by this architecture, e.g. os2/os2.obj
266 ARCHOBJS = $archobjs
267
268 .SUFFIXES: .c \$(OBJ_EXT) .i .s
269
270 # grrr
271 SHELL = $sh
272
273 # how to tr(anslate) newlines
274 TRNL = '$trnl'
275
276 OPTIMIZE = $optimize
277
278 EXTRAS = $extras
279
280 INSTALLPREFIXEXP = $prefix
281
282 !GROK!THIS!
283 # not used by Makefile but by installperl;
284 # mentioned here so that metaconfig picks these up
285 # $installusrbinperl
286 # $versiononly
287
288 case "${osname}:${osvers}" in
289 darwin:*)
290 $spitshell >>$Makefile <<EOF
291
292 # Your locales are broken (osname $osname, osvers $osvers)
293 # and to avoid the numerous
294 # perl: warning: Setting locale failed.
295 # warnings during the build process we reset the locale variables.
296
297 LC_ALL=C
298 LANG=C
299 LANGUAGE=C
300 EOF
301 ;;
302 esac
303
304 $spitshell >>$Makefile <<!GROK!THIS!
305 CROSS_NAME = ${CROSS_NAME}
306 CROSS_LIB = xlib/${CROSS_NAME}
307
308 CCCMD = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$@\`
309
310 CCCMDSRC = \`sh \$(shellflags) cflags-cross-${CROSS_NAME} "optimize='\$(OPTIMIZE)'" \$<\`
311
312 !GROK!THIS!
313
314 ## In the following dollars and backticks do not need the extra backslash.
315 $spitshell >>$Makefile <<'!NO!SUBS!'
316
317 CONFIGPM = xlib/$(CROSS_NAME)/Config.pm
318
319 private = preplibrary $(CONFIGPM) $(CROSS_LIB)/Config.pod lib/buildcustomize.pl
320
321 shextract = Makefile cflags config.h makedepend \
322 makedir myconfig writemain pod/Makefile
323
324 addedbyconf = UU $(shextract) lib/lib.pm
325
326 # Unicode data files generated by mktables
327 unidatafiles = lib/unicore/Decomposition.pl lib/unicore/TestProp.pl \
328 lib/unicore/CombiningClass.pl lib/unicore/Name.pl \
329 lib/unicore/UCD.pl lib/unicore/Name.pm \
330 lib/unicore/Heavy.pl lib/unicore/mktables.lst
331
332 # Directories of Unicode data files generated by mktables
333 unidatadirs = lib/unicore/To lib/unicore/lib
334
335 h1 = EXTERN.h INTERN.h XSUB.h av.h xconfig.h cop.h cv.h dosish.h
336 h2 = embed.h form.h gv.h handy.h hv.h hv_func.h keywords.h mg.h op.h opcode.h
337 h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
338 h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
339 h5 = utf8.h warnings.h
340 h = $(h1) $(h2) $(h3) $(h4) $(h5)
341
342 c1 = av.c scope.c op.c doop.c doio.c dquote.c dump.c gv.c hv.c mg.c reentr.c mro_core.c perl.c
343 c2 = perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c sv.c
344 c3 = taint.c time64.c toke.c util.c deb.c run.c universal.c pad.c globals.c keywords.c
345 c4 = perlio.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
346 c5 = $(mallocsrc)
347
348 c = $(c1) $(c2) $(c3) $(c4) $(c5) miniperlmain.c perlmain.c opmini.c
349
350 obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dquote$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT) mro_core$(OBJ_EXT)
351 obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
352 obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT) time64$(OBJ_EXT)
353
354 obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
355
356 lintflags = \
357 -b \
358 -n \
359 -p \
360 -Ncheck=%all \
361 -Nlevel=4 \
362 -errchk=parentheses \
363 -errhdr=%all \
364 -errfmt=src \
365 -errtags \
366 -erroff=E_ASSIGN_NARROW_CONV \
367 -erroff=E_BAD_PTR_CAST \
368 -erroff=E_BAD_PTR_CAST_ALIGN \
369 -erroff=E_BAD_PTR_INT_COMBINATION \
370 -erroff=E_BAD_SIGN_EXTEND \
371 -erroff=E_BLOCK_DECL_UNUSED \
372 -erroff=E_CASE_FALLTHRU \
373 -erroff=E_CONST_EXPR \
374 -erroff=E_CONSTANT_CONDITION \
375 -erroff=E_END_OF_LOOP_CODE_NOT_REACHED \
376 -erroff=E_EQUALITY_NOT_ASSIGNMENT \
377 -erroff=E_EXPR_NULL_EFFECT \
378 -erroff=E_FALSE_LOGICAL_EXPR \
379 -erroff=E_INCL_NUSD \
380 -erroff=E_LOOP_EMPTY \
381 -erroff=E_MAIN_PARAM \
382 -erroff=E_POINTER_TO_OBJECT \
383 -erroff=E_PTRDIFF_OVERFLOW \
384 -erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \
385 -erroff=E_STATIC_UNUSED \
386 -erroff=E_TRUE_LOGICAL_EXPR
387
388 splintflags = \
389 -I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \
390 -D__builtin_va_list=va_list \
391 -Dsigjmp_buf=jmp_buf \
392 -warnposix \
393 \
394 +boolint \
395 +charintliteral \
396 -fixedformalarray \
397 -mustfreefresh \
398 -nestedextern \
399 -predboolint \
400 -predboolothers \
401 -preproc \
402 -boolops \
403 -shadow \
404 -nullstate \
405 +longintegral \
406 +matchanyintegral \
407 -type \
408 \
409 +line-len 999 \
410 +weak
411
412 splintfiles = $(c1)
413
414 .c$(OBJ_EXT):
415 $(CCCMD) -I$(CROSS_LIB) $(PLDLFLAGS) $*.c
416
417 .c.i:
418 $(CCCMDSRC) -E $*.c > $*.i
419
420 .c.s:
421 $(CCCMDSRC) -S $*.c
422
423 all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
424 @echo " ";
425 @echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
426
427 .PHONY: all
428
429
430 # This is now done by installman only if you actually want the man pages.
431 # @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
432
433 # Phony target to force checking subdirectories.
434 # Apparently some makes require an action for the FORCE target.
435 .PHONY: FORCE
436 FORCE:
437 @sh -c true
438 !NO!SUBS!
439 $spitshell >>$Makefile <<!GROK!THIS!
440
441 # We do a copy of the op.c instead of a symlink because gcc gets huffy
442 # if we have a symlink forest to another disk (it complains about too many
443 # levels of symbolic links, even if we have only two)
444
445 opmini.c: op.c
446 \$(RMS) opmini.c
447 \$(CPS) op.c opmini.c
448
449 opmini\$(OBJ_EXT): opmini.c
450 \$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
451
452 globals\$(OBJ_EXT):
453
454 !GROK!THIS!
455 $spitshell >>$Makefile <<'!NO!SUBS!'
456 miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
457 $(CCCMD) $(PLDLFLAGS) $*.c
458
459 perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
460 sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
461
462 !NO!SUBS!
463 case "$osname" in
464 cygwin)
465 ;; # Let cygwin/Makefile.SHs do its work.
466 *)
467 $spitshell >>$Makefile <<'!NO!SUBS!'
468 perlmain$(OBJ_EXT): perlmain.c
469 $(CCCMD) $(PLDLFLAGS) $*.c
470
471 !NO!SUBS!
472 ;;
473 esac
474 $spitshell >>$Makefile <<'!NO!SUBS!'
475 # The file ext.libs is a list of libraries that must be linked in
476 # for static extensions, e.g. -lm -lgdbm, etc. The individual
477 # static extension Makefile's add to it.
478 ext.libs: $(static_ext)
479 -@test -f ext.libs || touch ext.libs
480
481 !NO!SUBS!
482
483 # How to build libperl. This is still rather convoluted.
484 # Load up custom Makefile.SH fragment for shared loading and executables:
485 case "$osname" in
486 *)
487 Makefile_s="$osname/Makefile.SHs"
488 ;;
489 esac
490
491 case "$osname" in
492 aix)
493 $spitshell >>$Makefile <<!GROK!THIS!
494 LIBS = $perllibs
495 # In AIX we need to change this for building Perl itself from
496 # its earlier definition (which is for building external
497 # extensions *after* Perl has been built and installed)
498 CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
499
500 !GROK!THIS!
501 case "$useshrplib" in
502 define|true|[yY]*)
503 $spitshell >>$Makefile <<'!NO!SUBS!'
504
505 LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
506 MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
507
508 $(LIBPERL_NONSHR): $(obj)
509 $(RMS) $(LIBPERL_NONSHR)
510 $(AR) rc $(LIBPERL_NONSHR) $(obj)
511
512 $(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
513 $(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
514 opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
515
516 MINIPERLEXP = $(MINIPERL_NONSHR)
517
518 LIBPERLEXPORT = perl.exp
519
520 !NO!SUBS!
521
522 ;;
523 *)
524 $spitshell >>$Makefile <<'!NO!SUBS!'
525 MINIPERLEXP = miniperl$(EXE_EXT)
526
527 PERLEXPORT = perl.exp
528
529 !NO!SUBS!
530 ;;
531 esac
532 $spitshell >>$Makefile <<'!NO!SUBS!'
533 perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
534 ./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
535
536 !NO!SUBS!
537 ;;
538 os2)
539 $spitshell >>$Makefile <<'!NO!SUBS!'
540 MINIPERLEXP = miniperl
541
542 perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
543 ./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
544
545 !NO!SUBS!
546 ;;
547 esac
548
549 if test -r $Makefile_s ; then
550 . $Makefile_s
551 $spitshell >>$Makefile <<!GROK!THIS!
552
553 $Makefile: $Makefile_s
554 !GROK!THIS!
555 else
556 $spitshell >>$Makefile <<'!NO!SUBS!'
557 $(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT)
558 !NO!SUBS!
559 case "$useshrplib" in
560 true)
561 $spitshell >>$Makefile <<'!NO!SUBS!'
562 rm -f $@
563 $(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
564 !NO!SUBS!
565 case "$osname" in
566 aix)
567 $spitshell >>$Makefile <<'!NO!SUBS!'
568 rm -f libperl$(OBJ_EXT)
569 mv $@ libperl$(OBJ_EXT)
570 $(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
571 !NO!SUBS!
572 ;;
573 esac
574 ;;
575 *)
576 $spitshell >>$Makefile <<'!NO!SUBS!'
577 rm -f $(LIBPERL)
578 $(AR) rc $(LIBPERL) $(obj) $(DYNALOADER)
579 @$(ranlib) $(LIBPERL)
580 !NO!SUBS!
581 ;;
582 esac
583 $spitshell >>$Makefile <<'!NO!SUBS!'
584
585 # How to build executables.
586
587 # The $& notation tells Sequent machines that it can do a parallel make,
588 # and is harmless otherwise.
589 # The miniperl -w -MExporter line is a basic cheap test to catch errors
590 # before make goes on to run preplibrary and then MakeMaker on extensions.
591 # This is very handy because later errors are often caused by miniperl
592 # build problems but that's not obvious to the novice.
593 # The Module used here must not depend on Config or any extensions.
594
595 !NO!SUBS!
596
597
598 $spitshell >>$Makefile <<'!NO!SUBS!'
599
600 perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
601 -@rm -f miniperl.xok
602 $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)dyn$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
603 $(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX)$(EXE_EXT) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
604
605 # Purify/Quantify Perls.
606
607 pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
608 $(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
609
610 purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
611 $(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
612
613 quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
614 $(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
615
616 # Valgrind perl (currently Linux only)
617
618 perl.valgrind.config: config.sh
619 @echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
620 @$(MAKE) perl.config.dashg
621 @echo "Checking usemymalloc='n' in config.sh..."
622 @grep "^usemymalloc=" config.sh
623 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
624 @echo "And of course you have to have valgrind..."
625 $(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
626
627 # Third Degree Perl (Tru64 only)
628
629 perl.config.dashg:
630 @echo "Checking optimize='-g' in config.sh..."
631 @grep "^optimize=" config.sh
632 @egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1
633
634 perl.third.config: config.sh
635 @echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
636 @$(MAKE) perl.config.dashg
637 @echo "Checking usemymalloc='n' in config.sh..."
638 @grep "^usemymalloc=" config.sh
639 @grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
640
641 perl.third: /usr/bin/atom perl.third.config perl
642 atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
643 @echo "Now you may run perl.third and then study perl.3log."
644
645 # Pixie Perls (Tru64 and IRIX only)
646
647 perl.pixie.config: config.sh
648 @echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
649 @$(MAKE) perl.config.dashg
650
651 perl.pixie.atom: /usr/bin/atom perl
652 atom -tool pixie -L. -all -toolargs="-quiet" perl
653
654 perl.pixie.irix: perl
655 pixie perl
656
657 perl.pixie: /usr/bin/pixie perl.pixie.config perl
658 if test -x /usr/bin/atom; then \
659 $(MAKE) perl.pixie.atom; \
660 else \
661 $(MAKE) perl.pixie.irix; \
662 fi
663 @echo "Now you may run perl.pixie and then run pixie."
664
665 # Gprof Perl
666
667 perl.config.dashpg:
668 @echo "Checking optimize='-pg' in config.sh..."
669 @grep "^optimize=" config.sh
670 @grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1
671
672 perl.gprof.config: config.sh
673 @echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
674 @$(MAKE) perl.config.dashpg
675
676 perl.gprof: /usr/bin/gprof perl.gprof.config
677 @-rm -f perl
678 $(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
679 @echo "Now you may run perl.gprof and then run gprof perl.gprof."
680
681 # Gcov Perl
682
683 perl.config.gcov:
684 @echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
685 @echo "Checking gccversion in config.sh..."
686 @grep "^gccversion=" config.sh
687 @grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
688 @echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
689 @echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
690 @grep "^ccflags=" config.sh
691 @grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
692
693 perl.gcov: perl.config.gcov
694 @-rm -f perl
695 $(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
696 @echo "Now you may run perl.gcov and then run gcov some.c."
697
698 !NO!SUBS!
699
700 fi
701
702 $spitshell >>$Makefile <<'!NO!SUBS!'
703
704 .PHONY: preplibrary
705 preplibrary: miniperl $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
706
707 .PHONY: makeppport
708 makeppport: miniperl$(EXE_EXT) $(CONFIGPM)
709 $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport
710
711 $(CROSS_LIB)/Config.pod: config.sh miniperl configpm Porting/Glossary
712 $(LDLIBPTH) ./miniperl -Ilib configpm --cross=$(CROSS_NAME)
713 cp *.h $(CROSS_LIB)/
714 cp ext/re/re.pm $(LIBDIR)/
715
716 $(CONFIGPM): $(CROSS_LIB)/Config.pod xconfig.h
717
718 lib/re.pm: ext/re/re.pm
719 @-rm -f $@
720 cp ext/re/re.pm lib/re.pm
721
722 lib/buildcustomize.pl: $(MINIPERL_EXE) write_buildcustomize.pl
723 $(MINIPERL) write_buildcustomize.pl >lib/buildcustomize.pl
724
725 unidatafiles $(unidatafiles): uni.data
726
727 uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
728 cd lib/unicore && $(LDLIBPTH) ../../miniperl -I../../lib mktables -P ../../pod -maketest -makelist -p
729 # Commented out so always runs, mktables looks at far more files than we
730 # can in this makefile to decide if needs to run or not
731 # touch uni.data
732
733 extra.pods: miniperl
734 -@test ! -f extra.pods || rm -f `cat extra.pods`
735 -@rm -f extra.pods
736 -@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
737 nx=`echo $$x | sed -e "s/README\.//"`; \
738 cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
739 echo "pod/perl"$$nx".pod" >> extra.pods ; \
740 done
741 -@rm -f pod/perlvms.pod
742 -@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
743 -@rm -f pod/perldelta.pod
744 -@test -f pod/perl5100delta.pod && cd pod && $(LNS) perl5100delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
745
746 extras.make: perl$(EXE_EXT)
747 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
748
749 extras.test: perl$(EXE_EXT)
750 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
751
752 extras.install: perl$(EXE_EXT)
753 -@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
754
755 .PHONY: install install-strip install-all install-verbose install-silent \
756 no-install install.perl install.man install.html
757
758 META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
759 $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -y
760
761 META.json: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
762 $(LDLIBPTH) ./miniperl -Ilib Porting/makemeta -j
763
764 install-strip:
765 $(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
766
767 install install-all:
768 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
769
770 install-verbose:
771 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
772
773 install-silent:
774 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
775
776 no-install:
777 $(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
778
779 # Set this to an empty string to avoid an attempt of rebuild before install
780 INSTALL_DEPENDENCE = all
781
782 install.perl: $(INSTALL_DEPENDENCE) installperl
783 $(LDLIBPTH) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
784 -@test ! -s extras.lst || $(MAKE) extras.install
785
786 install.man: all installman
787 $(LDLIBPTH) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
788
789 # XXX Experimental. Hardwired values, but useful for testing.
790 # Eventually Configure could ask for some of these values.
791 install.html: all installhtml
792 -@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
793 $(LDLIBPTH) ./perl installhtml \
794 --podroot=. --podpath=. --recurse \
795 --htmldir=$(privlib)/html \
796 --htmlroot=$(privlib)/html \
797 --splithead=pod/perlipc \
798 --splititem=pod/perlfunc \
799 --ignore=Porting/Maintainers.pm,Porting/pumpkin.pod,Porting/repository.pod \
800 --verbose
801
802
803 # I now supply perly.c with the kits, so the following section is
804 # used only if you force bison to run by saying
805 # make regen_perly
806 # You normally shouldn't remake perly.[ch].
807
808 .PHONY: regen_perly
809
810 run_byacc:
811 @echo "run_byacc is obsolete; try 'make regen_perly' instead"
812
813 # this outputs perly.h, perly.act and perly.tab
814 regen_perly:
815 perl regen_perly.pl
816
817 # We don't want to regenerate perly.c and perly.h, but they might
818 # appear out-of-date after a patch is applied or a new distribution is
819 # made.
820 perly.c: perly.y
821 -@sh -c true
822
823 perly.h: perly.y
824 -@sh -c true
825
826 SYM = globvar.sym perlio.sym
827
828 SYMH = perlvars.h intrpvar.h
829
830 CHMOD_W = chmod +w
831
832 # The following files are generated automatically
833 # embed.pl: proto.h embed.h embedvar.h
834 # opcode.pl: opcode.h opnames.h pp_proto.h
835 # regcomp.pl: regnodes.h
836 # warnings.pl: warnings.h lib/warnings.pm
837 # feature.pl: feature.h lib/feature.pl
838 # The correct versions should be already supplied with the perl kit,
839 # in case you don't have perl available.
840 # To force them to be regenerated, run
841 # perl regen.pl
842 # with your existing copy of perl
843 # (make regen_headers is kept for backwards compatibility)
844
845 .PHONY: regen_headers regen_all
846
847 regen regen_headers: FORCE
848 -perl regen.pl
849
850 regen_all: regen
851
852 .PHONY: manisort manicheck
853
854 manisort: FORCE
855 LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \
856 LC_ALL=C sort -fdo MANIFEST MANIFEST)
857
858 manicheck: FORCE
859 perl Porting/manicheck
860
861 # Extensions:
862 # Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
863 # automatically get built. There should ordinarily be no need to change
864 # any of this part of makefile.
865 #
866 # The dummy dependency is a place holder in case $(dynamic_ext) or
867 # $(static_ext) is empty.
868 #
869 # DynaLoader may be needed for extensions that use Makefile.PL.
870
871 ###$(DYNALOADER).c: $(EXTDIR)/DynaLoader/dl_dld.xs $(CONFIGPM)
872 ### if not exist $(AUTODIR) mkdir $(AUTODIR)
873 ### cd $(EXTDIR)\$(*B)
874 ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) $(*B)_pm.PL
875 ### $(HPERL) -I..\..\lib -MCross=$(CROSS_NAME) XSLoader_pm.PL
876 ### cd ..\..\win32
877 ### $(XCOPY) $(EXTDIR)\$(*B)\$(*B).pm $(LIBDIR)\$(NULL)
878 ### $(XCOPY) $(EXTDIR)\$(*B)\XSLoader.pm $(LIBDIR)\$(NULL)
879 ### cd $(EXTDIR)\$(*B)
880 ### $(XSUBPP) dl_win32.xs > $(*B).c
881 ### cd ..\..\win32
882 ###
883 ###$(EXTDIR)\DynaLoader\dl_win32.xs: dl_win32.xs
884 ### $(COPY) dl_win32.xs $(EXTDIR)\DynaLoader\dl_win32.xs
885
886
887
888 $(DYNALOADER): lib/buildcustomize.pl preplibrary FORCE
889 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
890
891 d_dummy $(dynamic_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
892 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=dynamic
893
894 s_dummy $(static_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary makeppport $(DYNALOADER) FORCE
895 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL) LINKTYPE=static $(STATIC_LDFLAGS)
896
897 n_dummy $(nonxs_ext): miniperl$(EXE_EXT) lib/buildcustomize.pl preplibrary $(DYNALOADER) FORCE
898 @$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --cross $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
899 !NO!SUBS!
900
901 $spitshell >>$Makefile <<EOF
902 $extra_dep
903 EOF
904
905 $spitshell >>$Makefile <<'!NO!SUBS!'
906
907 .PHONY: printconfig
908 printconfig:
909 @eval `$(LDLIBPTH) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
910
911 .PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
912 realclean _realcleaner clobber _clobber \
913 distclean veryclean _verycleaner
914
915 clean: _tidy _mopup
916
917 realclean: _realcleaner _mopup
918 @echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
919
920 _clobber:
921 -@rm -f Cross/run-* Cross/to-* Cross/from-*
922 rm -f config.sh cppstdin Policy.sh extras.lst
923
924 clobber: _realcleaner _mopup _clobber
925
926 distclean: clobber
927
928 # Like distclean but also removes emacs backups and *.orig.
929 veryclean: _verycleaner _mopup _clobber
930 -@rm -f Obsolete Wanted
931
932 # Do not 'make _mopup' directly.
933 _mopup:
934 rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c uudmap.h generate_uudmap$(EXE_EXT)
935 -rmdir .depending
936 -@test -f extra.pods && rm -f `cat extra.pods`
937 -@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
938 -rm -f perl.exp ext.libs extra.pods uni.data opmini.o
939 -rm -f perl.export perl.dll perl.libexp perl.map perl.def
940 -rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
941 -rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
942 -rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
943 -rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
944 -rm -f perl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.*
945 -rm -f config.over
946
947 # Do not 'make _tidy' directly.
948 _tidy:
949 -cd pod; $(LDLIBPTH) $(MAKE) clean
950 -cd utils; $(LDLIBPTH) $(MAKE) clean
951 -@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
952 $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=clean $$x MAKE=$(MAKE) ; \
953 done
954
955 _cleaner1:
956 -cd os2; rm -f Makefile
957 -cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
958 -cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
959 -@if test -f miniperl$(EXE_EXT) ; then \
960 for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
961 $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib make_ext.pl --target=$(CLEAN) $$x MAKE=$(MAKE) ; \
962 done ; \
963 else \
964 sh $(CLEAN).sh ; \
965 fi
966 rm -f realclean.sh veryclean.sh
967 -@test ! -f ./miniperl$(EXE_EXT) || $(LDLIBPTH) ./miniperl$(EXE_EXT) -Ilib mkppport --clean
968
969 # Some systems do not support "?", so keep these files separate.
970 _cleaner2:
971 -rm -f core.*perl.*.? t/core.perl.*.? .?*.c
972 rm -f core *perl.core t/core t/*perl.core core.* t/core.*
973 rm -f t/perl$(EXE_EXT) t/rantests
974 rm -rf t/tmp*
975 rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
976 rm -rf $(addedbyconf)
977 rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
978 rm -f $(private)
979 rm -rf $(unidatafiles) $(unidatadirs)
980 rm -rf lib/auto
981 rm -f lib/.exists lib/*/.exists lib/*/*/.exists
982 rm -f h2ph.man
983 rm -rf .config
984 rm -f preload
985 rm -rf lib/Encode lib/Compress lib/Hash lib/re
986 rm -rf lib/IO/Compress lib/IO/Uncompress
987 rm -f lib/ExtUtils/ParseXS/t/XSTest.c
988 rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
989 rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
990 -rmdir lib/B lib/Data
991 -rmdir lib/Filter/Util lib/IO/Socket
992 -rmdir lib/List lib/MIME lib/Scalar lib/Sys
993 -rmdir lib/threads lib/XS
994
995 _realcleaner:
996 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
997 @$(LDLIBPTH) $(MAKE) _cleaner2
998
999 _verycleaner:
1000 @$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
1001 @$(LDLIBPTH) $(MAKE) _cleaner2
1002 -rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
1003
1004 .PHONY: lint
1005 lint: $(c)
1006 rm -f *.ln
1007 lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
1008
1009 .PHONY: splint
1010 splint: $(c)
1011 splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles)
1012
1013 # Need to unset during recursion to go out of loop.
1014 # The README below ensures that the dependency list is never empty and
1015 # that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
1016
1017 MAKEDEPEND = Makefile makedepend
1018
1019 $(FIRSTMAKEFILE): README $(MAKEDEPEND)
1020 $(MAKE) depend MAKEDEPEND=
1021
1022 config.h: config_h.SH config.sh
1023 $(SHELL) config_h.SH
1024 # TODO - improve following line
1025 cp config.h $(CROSS_LIB)/
1026
1027 xconfig.h: config_h.SH Cross/config-$(CROSS_NAME).sh
1028 CONFIG_SH=Cross/config-$(CROSS_NAME).sh CONFIG_H=xconfig.h $(SHELL) config_h.SH
1029 #TODO $(LDLIBPTH) ./miniperl -Ilib -MCross=$(CROSS_NAME) config_h.PL "INST_VER=$(INST_VER)" "CORE_DIR=$(CROSS_LIB)" "CONFIG_H=xconfig.h"
1030 cp xconfig.h $(CROSS_LIB)/
1031 cp xconfig.h $(CROSS_LIB)/config.h
1032
1033 # When done, touch perlmain.c so that it doesn't get remade each time.
1034 .PHONY: depend
1035 depend: makedepend
1036 sh ./makedepend MAKE=$(MAKE)
1037 - test -s perlmain.c && touch perlmain.c
1038
1039 # Cannot postpone this until $firstmakefile is ready ;-)
1040 makedepend: makedepend.SH config.sh
1041 sh ./makedepend.SH
1042
1043 .PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
1044 test_tty test-tty _test_tty test_notty test-notty _test_notty \
1045 utest ucheck test.utf8 check.utf8 test.torture torturetest \
1046 test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
1047 test.third check.third utest.third ucheck.third test_notty.third \
1048 test.deparse test_notty.deparse test_harness test_harness_notty \
1049 minitest coretest test.taintwarn
1050
1051 # Cannot delegate rebuilding of t/perl to make
1052 # to allow interlaced test and minitest
1053
1054 TESTFILE=TEST
1055
1056 _test_prep:
1057 cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
1058
1059 # Architecture-neutral stuff:
1060
1061 test_prep_pre: preplibrary utilities $(nonxs_ext)
1062
1063 test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) \
1064 $(dynamic_ext) $(TEST_PERL_DLL)
1065 PERL=./perl $(MAKE) _test_prep
1066
1067 _test_tty:
1068 cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty
1069
1070 _test_notty:
1071 cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS)
1072
1073 # The second branch is for testing without a tty or controlling terminal,
1074 # see t/op/stat.t
1075 _test:
1076 if (true </dev/tty) >/dev/null 2>&1; then \
1077 $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \
1078 else \
1079 $(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \
1080 fi
1081 @echo "Ran tests" > t/rantests
1082
1083 test check: test_prep
1084 PERL=./perl $(MAKE) _test
1085
1086 test_tty: test_prep
1087 PERL=./perl $(MAKE) _test_tty
1088
1089 test_notty: test_prep
1090 PERL=./perl $(MAKE) _test_notty
1091
1092 utest ucheck test.utf8 check.utf8: test_prep
1093 PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test
1094
1095 coretest: test_prep
1096 PERL=./perl TEST_ARGS=-core $(MAKE) _test
1097
1098 test-prep: test_prep
1099
1100 test-tty: test_tty
1101
1102 test-notty: test_notty
1103
1104 # Torture testing
1105
1106 test.torture torturetest: test_prep
1107 PERL=./perl TEST_ARGS=-torture $(MAKE) _test
1108
1109 # Targets for UTF16 testing:
1110
1111 minitest.utf16: minitest.prep
1112 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
1113 && $(LDLIBPTH) ./perl TEST -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
1114
1115 test.utf16 check.utf16: test_prep
1116 PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test
1117
1118 utest.utf16 ucheck.utf16: test_prep
1119 PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test
1120
1121 # Targets for valgrind testing:
1122
1123 test_prep.valgrind: test_prep perl.valgrind
1124 PERL=./perl $(MAKE) _test_prep
1125
1126 test.valgrind check.valgrind: test_prep perl.valgrind.config
1127 PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test
1128
1129 utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
1130 PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
1131
1132 test_notty.valgrind: test_prep.valgrind perl.valgrind.config
1133 PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
1134
1135 # Targets for Third Degree testing.
1136
1137 test_prep.third: test_prep perl.third
1138 PERL=./perl.third $(MAKE) _test_prep
1139
1140 test.third check.third: test_prep.third perl.third
1141 PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test
1142
1143 utest.third ucheck.third: test_prep.third perl.third
1144 PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test
1145
1146 test_notty.third: test_prep.third perl.third
1147 PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
1148
1149 # Targets for Deparse testing.
1150
1151 test.deparse: test_prep
1152 PERL=./perl TEST_ARGS=-deparse $(MAKE) _test
1153
1154 test_notty.deparse: test_prep
1155 PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty
1156
1157 # Targets to run the test suite with -t
1158
1159 test.taintwarn: test_prep
1160 PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test
1161
1162 minitest.prep:
1163 -@test -f lib/lib.pm && test -f lib/Config.pm || \
1164 $(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles)
1165 @echo " "
1166 @echo "You may see some irrelevant test failures if you have been unable"
1167 @echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files."
1168 @echo " "
1169
1170 # Can't depend on lib/Config.pm because that might be where miniperl
1171 # is crashing.
1172 minitest: miniperl$(EXE_EXT) minitest.prep
1173 - cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
1174 && $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
1175
1176 # Test via harness
1177
1178 test_harness: test_prep
1179 PERL=./perl $(MAKE) TESTFILE=harness _test
1180
1181 test_harness_notty: test_prep
1182 PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test
1183
1184 # Handy way to run perlbug -ok without having to install and run the
1185 # installed perlbug. We don't re-run the tests here - we trust the user.
1186 # Please *don't* use this unless all tests pass.
1187 # If you want to report test failures, use "make nok" instead.
1188
1189 .PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
1190
1191 ok: utilities
1192 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
1193
1194 okfile: utilities
1195 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
1196
1197 oknack: utilities
1198 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
1199
1200 okfilenack: utilities
1201 $(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
1202
1203 nok: utilities
1204 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
1205
1206 nokfile: utilities
1207 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
1208
1209 noknack: utilities
1210 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
1211
1212 nokfilenack: utilities
1213 $(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
1214
1215 .PHONY: clist hlist shlist
1216
1217 clist: $(c)
1218 echo $(c) | tr ' ' $(TRNL) >.clist
1219
1220 hlist: $(h)
1221 echo $(h) | tr ' ' $(TRNL) >.hlist
1222
1223 shlist: $(sh)
1224 echo $(sh) | tr ' ' $(TRNL) >.shlist
1225
1226 Makefile: Makefile.SH ./config.sh
1227 $(SHELL) Makefile.SH
1228
1229 .PHONY: distcheck
1230 distcheck: FORCE
1231 perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
1232
1233 .PHONY: elc
1234 elc: emacs/cperl-mode.elc
1235
1236 emacs/cperl-mode.elc: emacs/cperl-mode.el
1237 -cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el
1238
1239 .PHONY: etags ctags tags
1240
1241 etags: TAGS
1242
1243 TAGS: emacs/cperl-mode.elc
1244 sh emacs/ptags
1245
1246 # Let's hope make will not go into an infinite loop on case-insensitive systems
1247 # This may also fail if . is in the head of the path, since perl will
1248 # require -Ilib
1249 tags: TAGS
1250 perl emacs/e2ctags.pl TAGS > tags
1251
1252 ctags:
1253 ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h
1254
1255 # AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
1256 # If this runs make out of memory, delete /usr/include lines.
1257 !NO!SUBS!
1258
1259 $eunicefix $Makefile
1260 $rm -f $firstmakefile
1261
1262 # Now do any special processing required before building.
1263
1264 case "$ebcdic" in
1265 define)
1266 xxx=''
1267 echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
1268 case "$osname" in
1269 os390|posix-bc)
1270 ;;
1271 *)
1272 echo "'$osname' is an EBCDIC system I don't know that well." >&4
1273 ;;
1274 esac
1275 case "$xxx" in
1276 '') echo "No parser files were regenerated. That's okay." >&2 ;;
1277 esac
1278 ;;
1279 esac
1280
1281 # ex: set ts=8 sts=4 sw=4 noet: