| 1 |
BER testing tool |
| 2 |
---------------- |
| 3 |
|
| 4 |
* Check all configs (MSC/BSC/BTS) for proper codec support |
| 5 |
- FR enabled |
| 6 |
- EFR enabled |
| 7 |
- AMR 12.2 enabled (and all other modes disabled !) |
| 8 |
- Use `amr-payload octet-aligned` in BSC config |
| 9 |
|
| 10 |
* Check BTS config |
| 11 |
- Disable jitter buffer : `bts N / rtp jitter-buffer 0` |
| 12 |
|
| 13 |
* Check BSC config |
| 14 |
- Disable radio timeout : `network / bts n / radio-link-timeout infinite` |
| 15 |
|
| 16 |
* Start BER testing tool |
| 17 |
- `./rtp_ber 4000` |
| 18 |
|
| 19 |
* On the MSC CLI, start a silent-call, then request GSM to test loop |
| 20 |
- `subscriber imsi <XXX> silent-call start tch/f speech-amr` |
| 21 |
- `subscriber imsi <XXX> ms-test close-loop b` |
| 22 |
|
| 23 |
Don't forget to terminate the loop and terminate the silent call ! |
| 24 |
|
| 25 |
- `subscriber imsi <XXX> ms-test open-loop` |
| 26 |
- `subscriber imsi <XXX> silent-call stop` |