Debian Codegraph @

ChangeLog

raw
1 This file contains information about the changes done to
2 ODR-DabMux in this repository
3
4 2026-06-17: Matthias P. Braendli <[email protected]>
5 (v5.5.1):
6 Update CarouselPriority FIC scheduler.
7 Fix compilation issues.
8
9 2026-05-08: Matthias P. Braendli <[email protected]>
10 (v5.5.0):
11 Update project to C++20, libboost 1.71.
12 Add hot-reload for frequency_information and other ensembles information.
13 Add HTTP server for stats.
14 Add FIG0/20.
15 Improve FIG repetition for highly-loaded ensembles (Three fic-schedulers now exist)
16 Add manual TAI offset setting, bypassing bulletin parsing.
17 Improve UDP multicast EDI input.
18
19 2025-10-01: Matthias P. Braendli <[email protected]>
20 (v5.4.1):
21 Fix race condition in TCP output stats that can lock up
22 odr-dabmux on some systems.
23 Add linkage-set hot-reload.
24
25 2025-09-10: Matthias P. Braendli <[email protected]>
26 (v5.4.0):
27 Add support for UDP EDI input to specify local interface IP.
28 Make sourceport optional in EDI output config.
29
30 2025-06-25: Matthias P. Braendli <[email protected]>
31 (v5.3.0):
32 Remove broken gui/ and point towards ODR-DabMux-GUI in README instead.
33 Improve logging about SSnn zero.
34 Rework FCT and TIST startup initialisation to guarantee TIST@FCT0 setting
35
36 2025-05-19: Matthias P. Braendli <[email protected]>
37 (v5.2.0):
38 Rework FIG0/10 DAB time indication to match EDI time.
39 Make PFT per-output configurable.
40
41 2025-03-18: Matthias P. Braendli <[email protected]>
42 (v5.1.0):
43 Fix startup value of DLFC and FCT.
44 Add statistics for EDI/TCP outputs.
45
46 2024-10-03: Matthias P. Braendli <[email protected]>
47 (v5.0.0):
48 Remove odr-zmq2edi.
49 Make compatible with easydab again.
50 Fix timestamp issue with EDI streams that have seconds=0.
51 Fix receiving multicast streams, when several multicast groups are
52 on the same port.
53
54 2024-05-05: Matthias P. Braendli <[email protected]>
55 (v4.5.0):
56 Switch project to C++17.
57 Update common code, with ClockTAI improvements among others.
58 Add uatype journaline to config.
59 Add ZMQ output to odr-zmq2edi.
60 Increase repetition rate for labels.
61 Add showjson to remote control.
62
63 2024-03-23: Matthias P. Braendli <[email protected]>
64 (v2.3.2):
65 This is a patch version for v2.3.1
66 Fix compilation issues with recent boost and compiler versions
67
68 2023-08-12: Matthias P. Braendli <[email protected]>
69 (v4.4.1):
70 Fix some compilation issues.
71
72 2023-05-09: Matthias P. Braendli <[email protected]>
73 (v4.4.0):
74 Ensure CIF count continuity on startup, and make CIF
75 count consistent with timestamp across restarts.
76 Ensure EDI output inserts ESTn tags in the order given
77 in the config file.
78
79 2022-10-18: Matthias P. Braendli <[email protected]>
80 (v4.3.0):
81 Add "load_entire_file" configuration setting for file inputs.
82 Add EDI/TCP output pre-roll burst to reduce downtime on new connections.
83 Support reading the mux config in JSON format.
84 Fix a 32-bit SId parse issue on 32-bit systems.
85 Improve installation instructions in INSTALL.md.
86
87 2022-04-19: Matthias P. Braendli <[email protected]>
88 (v4.2.1):
89 Fix `make dist`
90
91 2022-04-19: Matthias P. Braendli <[email protected]>
92 (v4.2.0):
93 Add FIG 0/14 FEC scheme defintion, for enhancedpacket mode subchannels.
94 Remove useless List Terminator for FIG0/13, and add support for Broadcast WebSite.
95 Add timestamps to log output.
96 Update manpages.
97
98 2022-03-15: Matthias P. Braendli <[email protected]>
99 (v4.1.0):
100 Improve EDI input.
101 Fix crash when FIG0/7 doesn't have enough space.
102 Fix FIG0/6 (service linking) database continuation flag.
103 Simplify compilation on ARM.
104 Rework web GUI (Thanks to Robin)
105
106 2021-06-03: Matthias P. Braendli <[email protected]>
107 (v4.0.0):
108 Incompatible change: Replace EDI packet interleaving by packet spreading (changes configuration
109 file format for ODR-DabMux and command line options for zmq2edi).
110 Add configurability for EDI UDP multicast input.
111 Simplify FIG 0/9, avoid sending an empty subfield list.
112 FIG 0/13 improvements for packet services, deprecate 'figtype' component setting which is replaced by 'user-application'.
113 Improvements for timestamped input.
114 Add --version command line option to all tools.
115 EDI output: make transport addressing optional.
116
117 2020-05-26: Matthias P. Braendli <[email protected]>
118 (v3.1.1):
119 Fix FIG2 segment count issue.
120 Handle disconnects better in EDI output.
121 Fix buffering issue with timestamped EDI input.
122
123 2020-04-15: Matthias P. Braendli <[email protected]>
124 (v3.1.0):
125 Initialise TIST on startup rounded to 24ms, as it was done before
126 v2.4.0 (see '5b1dea7').
127 Refresh TAI bulletin before it expires.
128 Set SO_REUSEADDR for TCP listening sockets (avoids some startup failures).
129 Add EDI input TIST delay setting, and improve EDI input stats and error handling.
130 Add FIG 0/7 and Alarm announcement support (Thanks to Mathias Kuntze).
131 Add startupcheck functionality to ODR-DabMux and ODR-ZMQ2EDI.
132 ZMQ2EDI will not quit anymore in case of input issues.
133 Handle FCT discontinuity in ZMQ2EDI, and display better statistics
134 which are usable by the new munin stats script doc/stats_zmq2edi_munin.py.
135
136 2019-10-30: Matthias P. Braendli <[email protected]>
137 (v3.0.1):
138 Fix compilation on older systems (like debian jessie)
139
140 2019-10-29: Matthias P. Braendli <[email protected]>
141 (v3.0.0):
142 Add EDI input with support for timestamps, which requires a change
143 in the configuration file format for the input specification. This
144 marks the beginning of a transition away from the ZMQ contribution
145 protocol towards the standard EDI, including EDI-over-TCP.
146 Move code shared with other mmbTools into a separate `common`
147 repository.
148 Change default TAI clock cache storage location to
149 `/var/tmp/odr-leap-seconds.cache`.
150 Add encoder version and uptime to stats if available (carried over
151 EDI, not ZMQ).
152 Fix nonblocking file input.
153 Modify ODR-zmq2edi and ODR-zmq2farsync timeout behaviour.
154
155 2019-12-20: Matthias P. Braendli <[email protected]>
156 (v2.4.2):
157 Backport the file input nonblock fix to v2.4.1.
158
159 2019-06-25: Matthias P. Braendli <[email protected]>
160 (v2.4.1):
161 Fix bug when odr-zmq2edi is used with more than one destination.
162
163 2019-06-07: Matthias P. Braendli <[email protected]>
164 (v2.4.0):
165 Add timestamp offset setting, and fix bug due to UTCO offset
166 not being properly applied. See doc/TIMESTAMPS.rst for more
167 details.
168 Implement FIG2 labels.
169 Fix bug for DAB MP2 in EEP_A.
170 Fix FIG0/24 for DAB+ services.
171 ODR-ZMQ2EDI: fix MNSC endianness swap bug.
172 Pull some RC changes from ODR-DabMod.
173 Implement EDI-over-TCP output.
174
175 2019-01-07: Matthias P. Braendli <[email protected]>
176 (v2.3.1):
177 Happy new year!
178 Fix TAI bulletin parsing on systems where long is 32 bit.
179 Add configurable URLs to download TAI clock bulletin and
180 rework the download logic.
181 Do not read TAI clock cache file from /tmp anymore, only
182 use /var/tmp.
183
184 2018-10-30: Matthias P. Braendli <[email protected]>
185 (v2.3.0):
186 Correct FIG0/6 output for services with different ECC.
187 Add support for transmitting empty Linkage Sets.
188 Save leap-second cache to /var/tmp, which doesn't get
189 cleared across reboots.
190 Rework audio level measurement in the statistics server to
191 alleviate some timing-related issues.
192 odr-zmq2edi: Add option to drop late packets.
193
194 2018-07-31: Matthias P. Braendli <[email protected]>
195 (v2.2.0):
196 Fix delays and FIG repetition burst on announcement switching.
197 Add support for services with different ECC (Signalled in FIG0/9).
198 Improve ODR-ZMQ2EDI statistics.
199
200 2018-05-29: Matthias P. Braendli <[email protected]>
201 (v2.1.2):
202 A couple of internal changes and fixes for
203 compilation warnings.
204
205 2018-03-27: Matthias P. Braendli <[email protected]>
206 (v2.1.1):
207 Fix segmentation fault in peak audio statistics
208 calculation.
209
210 2018-03-23: Matthias P. Braendli <[email protected]>
211 (v2.1.0):
212 Add version string to management server.
213 Introduce slow audio peak statistic.
214 Avoid doing useless copies in the RAW output.
215
216 2018-03-01: Matthias P. Braendli <[email protected]>
217 (v2.0.0):
218 Configuration file syntax changed for Frequency Information
219 and Other Services settings.
220 Statistics server changes: audio-level peak information is
221 measured over the last second, and not anymore since the last
222 request. Same for buffers, where min/max are measured over
223 thirty seconds.
224 Make nonblock available again for file inputs.
225
226 2018-02-09: Matthias P. Braendli <[email protected]>
227 (v1.3.3):
228 Add dynamic/static PTy setting to configuration.
229 Add UTF-8 to EBU Latin character set converter for labels.
230 Show TAI bulletin expiration in RC.
231 Stop using SUBDIRS in automake, and build the executable in ./ and not
232 in ./src anymore.
233
234 2018-01-23: Matthias P. Braendli <[email protected]>
235 (v1.3.2):
236 Add clock selection to RAW output.
237 zmq2edi: intentionnally crash after timeout.
238 Add command "state" to the monitoring interface and add to Munin
239 script.
240 Fix TAI bulletin download failure handling.
241 Improve portability for non-Linux POSIX systems, and improve
242 autoconf checks.
243 Default international-table to 1.
244
245 2017-08-23: Matthias P. Braendli <[email protected]>
246 (v1.3.1):
247 Add retords.pl script for Xymon monitoring tool.
248 Add odr-zmq2edi tool, and add necessary metadata to
249 the ZMQ output of ODR-DabMux. The configuration file
250 was extended in a backward-compatible way. Handling
251 of the TAI clock subsystem has been adapted too.
252
253 2017-06-30: Matthias P. Braendli <[email protected]>
254 (v1.3.0):
255 Add support for FIG0/24 to announce that a service is present
256 in another ensemble. This completes the implementation of all
257 service linking FIGs according to ETSI TS 103 176 Figure 1.
258 Allow EDI packet lengths up to 1400 bytes.
259 Add local cache for the leap second information downloaded from
260 IETF, remove download from USNO servers, as they don't give validity
261 information.
262
263 2017-06-05: Matthias P. Braendli <[email protected]>
264 (v1.2.2):
265 Add support for FIG0/21 "Frequency Information".
266 Improve EDI fragment interleaver.
267 Avoid stalling the multiplexer when the TCP output is used.
268
269 2017-01-29: Matthias P. Braendli <[email protected]>
270 (v1.2.1):
271 Bugfix for illegal memory access in EDI PFT layer.
272 Add experimental STI-D(PI, X)/RTP input.
273
274 2017-01-24: Matthias P. Braendli <[email protected]>
275 (v1.2.0):
276 Remove the libfec dependency.
277 Adapt several FIGs to EN 300 401 V2.1.1.
278 Add FIG0/6 for service linking information.
279 Big overhaul of all inputs.
280 TCP output improvements, stability and handling of multiple
281 connections.
282 Fix ZeroMQ input encryption for MPEG inputs.
283 Rework PRBS source and describe it better.
284 Remove unused bridge, SLIP, Test and nonfunctional
285 DMB input.
286 Add fragment interleaver for the EDI output.
287 Fix important issue when both EDI and TIST are enabled.
288 Enable syslog logger earlier.
289
290 2016-09-02: Matthias P. Braendli <[email protected]>
291 (v1.1.0):
292 Switch FIG0/10 to long form, the latest draft spec marks the
293 short form as legacy.
294 Add RC support for deferred triggering of announcements, see
295 doc/remote_control.txt
296
297 2016-07-30: Matthias P. Braendli <[email protected]>
298 (v1.0.0):
299 Remove old carousel.
300 Fix FIGs 0/2 and 0/8 when data services present.
301 Fix parsing of TAI-UTC bulletin for EDI TIST.
302 ZeroMQ is now a mandatory dependency because of the ManagementServer.
303 Minor bugfixes and improvements.
304
305 2016-03-26: Matthias P. Braendli <[email protected]>
306 (v0.9.0):
307 Enable new carousel by default.
308 Integrate munin script improvements.
309 EDI bugfix when many CU are used.
310 EDI: add support for PFT with FEC=0 (only fragmentation).
311 EDI: backward-incompatible configuration change.
312 EDI: transmit timestamp with TAI vs UTC correction (experimental).
313 Get compilation working under FreeBSD and OSX.
314 Add ability to specify source and TTL for UDP output.
315 Split example.mux into a simple and a more advanced example.
316
317 2015-11-27: Matthias P. Braendli <[email protected]>
318 (v0.8.1):
319 Fix compilation with test input.
320 Add PTy to remote control.
321 Add EDI options to configuration file for multicast settings.
322
323 2015-09-13: Matthias P. Braendli <[email protected]>
324 (v0.8.0):
325 Pad labels with spaces instead of terminating them with NUL.
326 Modify real-time priority.
327 Refactor big mux loop into separate function.
328 Add ability to read out full configuration tree in JSON.
329 Remove old command-line interface.
330 Fix EDI errors.
331 Replace TCP socket for Statistics and Management server by ZMQ
332 REP/REQ.
333 Start activities on a simple web GUI for monitoring and configuration.
334 Add new FIG carousel, not enabled by default.
335 Add utility to drive a FarSync card from a ZMQ ETI stream.
336 Improve FIG0/13 signalling (DG flag, CAOrg removal)
337 Add announcement support (FIG0/18 and 0/19)
338
339 2015-07-27: Matthias P. Braendli <[email protected]>
340 (v0.7.5):
341 Fix segmentation fault in short label check logic.
342
343 2015-07-03: Matthias P. Braendli <[email protected]>
344 (v0.7.4):
345 Allow empty component labels
346 Fix compilation with ZeroMQ 4.1.x
347
348 2015-04-10: Matthias P. Braendli <[email protected]>
349 (v0.7.3):
350 Security: RC only listens on localhost.
351 Change FIG signalisation handling for User Application Type,
352 which has an impact on Slideshow.
353 -e parameter becomes optional.
354 Improve error messages and documentation.
355 Start some activities for a web-based GUI.
356
357 2014-09-26: Matthias P. Braendli <[email protected]>
358 (v0.7.2):
359 Fix a memory leak with the ZMQ input.
360 Fix handling of timestamps when using ZMQ input.
361 Add the experimental EDI output.
362 Support new ZeroMQ frame format also for toolame-dab.
363 Update FarSync driver to latest version.
364 When used without configuration file, LTO defaults to auto,
365 TM defaults to 1.
366 Add protection profile option to configuration.
367
368 2014-05-20: Matthias P. Braendli <[email protected]>
369 (v0.7.1):
370 This is a bugfix release, with a minor update
371 to the input state server.
372 * odr-dabmux:
373 Fix -r command line option.
374 Correct internal allocation/deallocation mistakes.
375 Add "Silent" state to input states.
376 Little changes in munin graph script.
377
378 2014-04-25: Matthias P. Braendli <[email protected]>
379 (v0.7.0):
380 This version supports a new ZeroMQ frame format. The
381 old format is still used by toolame-dab, and by
382 older versions of fdk-aac-dabplus, and will stay
383 supported.
384 * odr-dabmux:
385 Add local-time-offset to remote control,
386 and support 'auto' setting in configuration file.
387 Update the munin script.
388 Support the new ZeroMQ framing format.
389 Support ZeroMQ CURVE authentication.
390 Make ZeroMQ buffering better configurable.
391 Include peak audio level in munin statistics.
392
393 2014-04-04: Matthias P. Braendli <[email protected]>
394 (v0.6.0):
395 Adds support for MOT Slideshow and DLS,
396 compatible with mot-encoder from
397 fdk-aac-dabplus
398 * odr-dabmux:
399 Add FIG0/13 signalling for MOT slideshow
400 Add local-time-offset and intl table options
401 Fix some unseen compilation warnings
402 Change ZMQ output format to guarantee frame
403 alignment (not backward compatible)
404
405 2014-02-14: Matthias P. Braendli <[email protected]>
406 (v0.5.0):
407 * odr-dabmux:
408 Service and component labels can now be changed on
409 the fly using the remote control.
410 ZMQ input buffer size can be changed using the RC.
411 Modify the RC 'list' command to simplify usage.
412 Clean up the startup configuration dump.
413 Added fault checking logic to RC that can restart
414 it in case of a failure.
415 Add doc/remote_control.txt
416
417 2014-02-12: Matthias P. Braendli <[email protected]>
418 (v0.4.3):
419 * odr-dabmux:
420 Add support for hexadecimal IDs in configuration file.
421 Add ZMQ input for toolame-dab.
422
423 2014-02-11: Matthias P. Braendli <[email protected]>
424 (v0.4.2)
425 * odr-dabmux:
426 Actually add zmq.hpp to Makefile.am
427 (v0.4.1)
428 * odr-dabmux:
429 Include zmq.hpp locally and prefer it over the
430 system one.
431 Fix wrong usage of zmq::socket_t.recv
432
433 2014-02-07: Matthias P. Braendli <[email protected]>
434 (v0.4.0)
435 * odr-dabmux:
436 CRC-DabMux renamed to ODR-DabMux
437 Version bump to 0.4.0
438
439 2014-01-31: Matthias P. Braendli <[email protected]>
440 (tag r12):
441 * crc-dabmux:
442 Create new object-oriented abstraction for the
443 inputs, with a wrapper for all existing inputs
444 Adapt inputZMQ to the new internal interface
445 Add a telnet Remote Control interface
446
447 2014-01-31: Matthias P. Braendli <[email protected]>
448 (tag r11):
449 * crc-dabmux:
450 Replace TCPLog by Logger that supports syslog
451 Add TCP statistics server
452 Make ZMQ input publish buffer statistics
453 Add Munin helper script to graph ZMQ input stats
454 Fix ZMQ include when inputzmq disabled
455
456 2014-01-05: Matthias P. Braendli <[email protected]>
457 (tag r10):
458 * crc-dabmux:
459 Add ZeroMQ input, compatible with fdk-aac-dabplus-zmq
460 Replace CRC-DabMux-cfg with -e option
461
462 2013-12-14: Matthias P. Braendli <[email protected]>
463 (tag r9):
464 * autotools:
465 Remove autogenerated files and add bootstrap
466 Fix faulty logic for --enable-output-zeromq
467 Update version generation for git
468
469 2013-11-10: Matthias P. Braendli <[email protected]>
470 (tag r8):
471 * crc-dabmux:
472 Some configuration parsing and logging fixes.
473 Replaced the C-style function dispatching for the outputs
474 by C++ objects with inheritance.
475 Added support for ZeroMQ ETI output.
476 ZeroMQ dependency added in configure.ac
477 Versioning changed to make hg revision visible
478 Completed READMEs and INSTALLs
479
480 2012-09-13: Matthias P. Braendli <[email protected]>
481 (tag r7):
482 * crc-dabmux/src/*:
483 Added shortlabel support to configuration file
484 Added Boost version check into autoconf
485
486 2012-08-26: Matthias P. Braendli <[email protected]>
487 (tag r6):
488 * crc-dabmux/src/DabMux.h:
489 Added missing file DabMux.h
490
491 2012-08-23: Matthias P. Braendli <[email protected]>
492 (tag r5):
493 * crc-dabmux/*:
494 Refactoring command line handling for crc-dabmux,
495 added configuration file parser including example.
496 When the program is called as CRC-DabMux-cfg, it reads
497 the Ensemble definition from a file rather than from
498 the command line. An example file is in doc/
499 DabMux now depends on Boost.
500
501 2012-08-17: Matthias P. Braendli <[email protected]>
502 (tags r4, r3, r2 and r1 were relevant to crc-dabmod in the old repository)
503
504 2011-05-24 Pascal Charest <[email protected]>
505
506 * src/DabMux.cpp: Changed for more precise messages.
507 * src/DabMux.cpp: Added ECC support.
508 * src/dabInputFile.cpp: Removed unused macros, which solved unitialised bug.
509 * src/dabInputPacketFile.cpp: Removed unused macros, which solved unitialised bug.
510
511 2010-08-23 Pascal Charest <[email protected]>
512
513 * src/DabMux.cpp: Added UDP input for data subchannel (bug).
514
515 2010-06-24 Pascal Charest <[email protected]>
516
517 * src/DabMux.cpp: Added support for timestamp.
518
519 2010-06-17 Pascal Charest <[email protected]>
520
521 * src/DabMux.cpp: Solved FIC date bug.
522
523 Copyright (C) 2010,2011 Her Majesty the Queen in Right of Canada
524 (Communications Research Center Canada)
525
526 Copyright (C) 2013,2014 Matthias P. Braendli, http://mpb.li
527
528 This file is part of ODR-DabMux.
529
530 ODR-DabMux is free software: you can redistribute it and/or modify
531 it under the terms of the GNU General Public License as
532 published by the Free Software Foundation, either version 3 of the
533 License, or (at your option) any later version.
534
535 ODR-DabMux is distributed in the hope that it will be useful,
536 but WITHOUT ANY WARRANTY; without even the implied warranty of
537 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
538 GNU General Public License for more details.
539
540 You should have received a copy of the GNU General Public License
541 along with ODR-DabMux. If not, see <http://www.gnu.org/licenses/>.