Debian Codegraph @

debian/S90.nvram-wakeup

raw
1 #
2 # VDR shutdown hook for nvram-wakeup - Tobias Grimm <[email protected]>
3 # ----------------------------------
4 #
5 # This shutdown hook sets the wakeup time for the next timer using
6 # nvram-wakeup. If necessary the shutdown command is modified to
7 # use a special shutdown strategy.
8 #
9
10 NVRAMCMD=/usr/sbin/nvram-wakeup
11
12 # read arguments for nvram-wakeup from conf-file
13 . /etc/vdr/vdr-nvram-wakeup.conf
14
15 # Defaults:
16 [ -z "$ENABLED" ] && export ENABLED="no"
17 [ -z "$COMMANDLINE" ] && export COMMANDLINE=""
18 [ -z "$SPECIALSHUTDOWN" ] && export SPECIALSHUTDOWN=""
19 [ -z "$REGULAR_DAYS" ] && export REGULAR_DAYS=0
20 [ -z "$REGULAR_TIME" ] && export REGULAR_TIME=0
21 [ -z "$FORCE_REBOOT" ] && export FORCE_REBOOT="no"
22
23 LOG="logger -t vdr-nvram-wakeup"
24
25 if [ $ENABLED = "no" ] ; then
26 $LOG "nvram-wakeup functionality is disabled"
27 exit 0
28 fi
29
30 request_reboot()
31 {
32 if [ -z "$SPECIALSHUTDOWN" ] ; then
33 $LOG "nvram-wakeup: A special shutdown strategy is required but not configured."
34 echo "ABORT_MESSAGE=\"no special shutdown configured\""
35 exit 1
36 else
37 echo "SHUTDOWNCMD=\"$SPECIALSHUTDOWN\""
38 exit 0
39 fi
40 }
41
42 # calculate, at what time the machine should be powered on:
43
44 TIMER=$1
45
46 if [ $REGULAR_DAYS -gt 0 ]; then
47 REGULAR_TIMER=$((`date -d "$REGULAR_TIME" +%s` + $REGULAR_DAYS * 24 * 60 * 60))
48
49 # when no vdr timer is set or vdr timer starts later than regular timer:
50 if [ $TIMER -eq 0 ] || [ $TIMER -gt 0 -a $REGULAR_TIMER -lt $TIMER ] ; then
51 TIMER=$REGULAR_TIMER
52 fi
53 fi
54
55 # set wakeup time and check nvram-wakeup and check result:
56
57 $LOG "$NVRAMCMD -ls $TIMER $COMMANDLINE"
58
59 $NVRAMCMD -ls $TIMER $COMMANDLINE
60
61 case $? in
62 0) # all went ok - new date and time set
63 $LOG "nvram-wakeup: everything ok"
64
65 if [ $FORCE_REBOOT = "yes" ] ; then
66 $LOG "nvram-wakeup: reboot not needed but forced"
67 request_reboot
68 fi
69
70 exit 0
71 ;;
72 1) # all went ok - new date and time set.
73 #
74 # *** but we need to reboot. ***
75 #
76 # for some boards this is needed after every change.
77 #
78 # for some other boards, we only need this after changing the
79 # status flag, i.e. from enabled to disabled or the other way.
80
81
82 # For plan A - (Plan A is not supported anymore---see README)
83 #
84 # For plan B - (don't forget to install the modified kernel image first)
85 #
86
87 $LOG "nvram-wakeup: everything ok - need to reboot first"
88 request_reboot
89
90 ;;
91 *) # something went wrong
92 # don't do anything - just exit with status 1
93
94 $LOG "nvram-wakeup: could not set time, shutdown will be aborted"
95 echo "ABORT_MESSAGE=\"nvram-wakeup could not set time\""
96 exit 1
97 ;;
98 esac