Debian Codegraph @

tcl/scenario-generation/scen-lib/rmcc-1.tcl

raw
1 # Correlated and Uncorrelated Loss Scenario:
2
3 # Topology:
4
5 # 0 0 Source
6 # |
7 # 1 0
8 # / \
9 # / \
10 # 2 0 3 0
11 # / \ \
12 # 4 0 5 0 6 0
13 # R1 R2 R3
14 #
15
16 #
17 # Simulation A : All links have 1Mbps BW. There is 10% loss in link 0-1
18 # No loss in other links.
19
20 # Simulation B: Similar to setup of A except that 10% loss now takes
21 # place in links 1-2 and 1-3. No loss in other links.
22
23 # Simulation C: 10% loss in link 1-3. and 5% loss in link 1-2. No
24 # loss in other links.
25 # Flow monitors measure thruput at link 2-4, 2-5 and 3-6.
26
27 #usage: ns rmcc-1.tcl -test <#test no>
28 #test number options: 1,2, 3 or 4
29
30
31 source ../../mcast/srm-nam.tcl ;#to separate control messages
32 source rmcc.tcl
33
34
35 ScenLib/RM instproc make_topo1 { at } {
36 global ns n prog t
37 $self make_nodes 7
38 #color them
39 $n(0) color "red"
40 $n(4) color "orchid"
41 $n(5) color "orchid"
42 $n(6) color "orchid"
43
44 #now setup topology
45 $ns duplex-link $n(0) $n(1) 1Mb 10ms DropTail
46 $ns duplex-link $n(1) $n(2) 1Mb 10ms DropTail
47 $ns duplex-link $n(1) $n(3) 1Mb 10ms DropTail
48 $ns duplex-link $n(2) $n(4) 1Mb 10ms DropTail
49 $ns duplex-link $n(2) $n(5) 1Mb 10ms DropTail
50 $ns duplex-link $n(3) $n(6) 1Mb 10ms DropTail
51
52 $ns duplex-link-op $n(0) $n(1) orient down
53 $ns duplex-link-op $n(1) $n(2) orient left-down
54 $ns duplex-link-op $n(1) $n(3) orient right-down
55 $ns duplex-link-op $n(2) $n(4) orient left-down
56 $ns duplex-link-op $n(2) $n(5) orient right-down
57 $ns duplex-link-op $n(3) $n(6) orient right-down
58
59 $self make_flowmon $at $n(2) $n(4) flowStats_2_4.$t \
60 $n(2) $n(5) flowStats_2_5.$t \
61 $n(3) $n(6) flowStats_3_6.$t
62 # $self make_flowmon $n(2) $n(5) flowStats_2_5.$t
63 # $self make_flowmon $n(3) $n(6) flowStats_3_6.$t
64 }
65
66
67
68 #ScenLib/RM instproc setup_mcast {} {
69 # global ns n opts srmStats srmEvents
70
71 # mproto options : 5
72 # CtrMcast, DM, detailedDM, dynamicDM, pimDM
73 # set mrthandle [$ns mrtproto $opts(routingProto) {}]
74
75 # set fid 0
76 # set dest [Node allocaddr]
77 # $ns at 0.3 "$mrthandle switch-treetype $dest"
78
79 # set src [new Agent/$opts(srmSimType)]
80 # $src set dst_ $dest
81 # $src set fid_ [incr fid]
82 # $src trace $srmEvents
83 # $src log $srmStats
84 # $ns at 1.0 "$src start"
85 # $ns attach-agent $n(0) $src
86
87 # for {set i 4} {$i < 7} {incr i} {
88 # set rcvr($i) [new Agent/$opts(srmSimType)]
89 # $rcvr($i) set dst_ $dest
90 # $rcvr($i) set fid_ [incr fid]
91 # $rcvr($i) trace $srmEvents
92 # $rcvr($i) log $srmStats
93 # $ns attach-agent $n($i) $rcvr($i)
94 # $ns at 1.0 "$rcvr($i) start"
95 # }
96
97 #setup source
98 # set cbr [new Agent/CBR]
99 # $cbr set packetSize_ 1000
100 # $src traffic-source $cbr
101 # $src set packetSize_ 1000 ;#so repairs are correct
102 # $cbr set fid_ 0
103 # $ns at 3.0 "$src start-source"
104 #}
105
106
107
108 #ScenLib/RM instproc attach-tcp {} {
109 # global ns n
110 #Attach a TCP flow between src and recvr1
111 # set tcp [new Agent/TCP]
112 # $tcp set fid_ 2
113 # $tcp set packetSize_ 1000
114 # $ns attach-agent $n(0) $tcp
115
116 # set sink [new Agent/TCPSink]
117 # $ns attach-agent $n(4) $sink
118 # $ns connect $tcp $sink
119
120 # set ftp [new Application/FTP]
121 # $ftp attach-agent $tcp
122 # $ns at 1.5 "$ftp start"
123
124 #}
125
126
127
128 proc test {num } {
129 global ns n prog
130 puts "running test$num"
131 set test_scen [new ScenLib/RM]
132 switch $num {
133 "1" {
134 $test_scen make_topo1 6.0
135 $test_scen create_mcast 0 0.3 1.0 3.0 4 5 6
136 $test_scen loss-model-case1 2.52 0 1
137 #$ns at 6.0 "$flowmon dump"
138 $ns at 6.0 "finish"
139 }
140 "2" {
141 $test_scen make_topo1 12.0
142 $test_scen create_mcast 0 0.3 1.0 3.0 4 5 6
143 $test_scen loss-model-case2 2.52 2.52 1 2 1 3
144 #$ns at 12.0 "$flowmon dump"
145 $ns at 12.0 "finish"
146 }
147 "3" {
148 $test_scen make_topo1 18.0
149 $test_scen create_mcast 0 0.3 1.0 3.0 4 5 6
150 $test_scen loss-model-case3 2.52 2.52 1 2 1 3
151 #$ns at 18.0 "$flowmon dump"
152 $ns at 18.0 "finish"
153 }
154 default {
155 puts "Unknown test number $num"
156 usage $prog
157 }
158 }
159 $test_scen create_tcp 0 4 1.5
160 $ns run
161 }
162
163 global argv prog mflag
164 set mflag 0
165 if [string match {*.tcl} $argv0] {
166 set prog [string range $argv0 0 [expr [string length $argv0] - 5]]
167 } else {
168 set prog $argv0
169 }
170
171 if {[llength $argv] < 1} {
172 puts "Insufficient number of arguments"
173 usage $prog
174 }
175
176 global opts t
177 process_args $argv
178 set t $prog.$opts(test)
179 test $opts(test)
180
181
182
183