Debian Codegraph @

debian/nanorc

raw
1 ## Sample initialization file for GNU nano.
2 ##
3 ## For the options that take parameters, the default value is shown.
4 ## Other options are unset by default. To make sure that an option
5 ## is disabled, you can use "unset <option>".
6 ##
7 ## Characters that are special in a shell should not be escaped here.
8 ## Inside string parameters, quotes should not be escaped -- the last
9 ## double quote on the line will be seen as the closing quote.
10
11 ## If you want ^F, ^B, M-F and M-B to do what they did before version 8.0:
12 # bind ^F forward main
13 # bind ^B back main
14 # bind M-F formatter main
15 # bind M-B linter main
16
17 ## Make M-< and M-> switch between buffers, as they did before version 9.0:
18 # bind M-< prevbuf main
19 # bind M-> nextbuf main
20
21 ## Make 'nextword' (Ctrl+Right) and 'chopwordright' (Ctrl+Delete)
22 ## stop at word ends instead of at beginnings.
23 # set afterends
24
25 ## When soft line wrapping is enabled, make it wrap lines at blanks
26 ## (tabs and spaces) instead of always at the edge of the screen.
27 # set atblanks
28
29 ## Automatically indent a newly created line to the same number of
30 ## tabs and/or spaces as the preceding line -- or as the next line
31 ## if the preceding line is the beginning of a paragraph.
32 # set autoindent
33
34 ## Back up files to the current filename plus a tilde.
35 # set backup
36
37 ## The directory to put unique backup files in.
38 # set backupdir ""
39
40 ## Use bold text instead of reverse video text.
41 # set boldtext
42
43 ## Treat any line with leading whitespace as the beginning of a paragraph.
44 # set bookstyle
45
46 ## The characters treated as closing brackets when justifying paragraphs.
47 ## This may not include any blank characters. Only closing punctuation,
48 ## optionally followed by these closing brackets, can end sentences.
49 # set brackets ""')>]}"
50
51 ## Automatically hard-wrap the current line when it becomes overlong.
52 # set breaklonglines
53
54 ## Do case-sensitive searches by default.
55 # set casesensitive
56
57 ## Interpret digits after a colon after a filename (on the command line)
58 ## as the line number to go to in that file.
59 set colonparsing
60
61 ## Constantly report the cursor position, in the status bar or minibar.
62 # set constantshow
63
64 ## Use cut-from-cursor-to-end-of-line by default.
65 # set cutfromcursor
66
67 ## Do not use the line below the title bar, leaving it entirely blank.
68 # set emptyline
69
70 ## Set the target width for automatic hard-wrapping and for justifying
71 ## paragraphs. If the specified value is 0 or less, the wrapping point
72 ## will be the terminal's width minus this number.
73 # set fill -8
74
75 ## Draw a vertical stripe at the given column, to help judge text width.
76 ## (This option does not have a default value.)
77 # set guidestripe 75
78
79 ## Remember the used search/replace/command strings for the next session.
80 set historylog
81
82 ## Display a "scrollbar" on the righthand side of the edit window.
83 # set indicator
84
85 ## Scroll the buffer contents per half-screen instead of per line.
86 # set jumpyscrolling
87
88 ## Display line numbers to the left (and any anchors in the margin).
89 # set linenumbers
90
91 ## Let other users (of nano or vim) know that you are editing the file
92 ## they are trying to edit, and the other way around.
93 set locking
94
95 ## Fall back to slow libmagic to try and determine an applicable syntax.
96 # set magic
97
98 ## The opening and closing brackets that are found by a matching-bracket
99 ## search. This may not contain blank characters. The opening brackets
100 ## must come before the closing ones, and they must be in the same order.
101 # set matchbrackets "(<[{)>]}"
102
103 ## Suppress the title bar and show the filename plus a cursor-position
104 ## percentage in the space of the status bar.
105 # set minibar
106
107 ## Enable mouse support, if available for your system. When enabled,
108 ## mouse clicks can be used to place the cursor, set the mark (with
109 ## two clicks), and execute shortcuts. The mouse will work in the
110 ## X Window System, and on the console when gpm is running.
111 # set mouse
112
113 ## Switch on multiple file buffers (inserting a file will put it into
114 ## a separate buffer).
115 # set multibuffer
116
117 ## Don't convert files from DOS format.
118 # set noconvert
119
120 ## Don't display the helpful shortcut lists at the bottom of the screen.
121 # set nohelp
122
123 ## Don't automatically add a newline when a file does not end with one.
124 # set nonewlines
125
126 ## Set operating directory. nano will not read or write files outside
127 ## this directory and its subdirectories. Also, the current directory
128 ## is changed to here, so any files are inserted from this dir. A blank
129 ## string means the operating-directory feature is turned off.
130 # set operatingdir ""
131
132 ## Remember the position of cursor and anchors for the next editing session.
133 # set positionlog
134
135 ## Preserve the XON and XOFF keys (^Q and ^S).
136 # set preserve
137
138 ## The characters treated as closing punctuation when justifying paragraphs.
139 ## This may not contain blank characters. Only these terminating characters,
140 ## optionally followed by closing brackets, can end sentences.
141 # set punct "!.?"
142
143 ## Make status-bar messages disappear after 1 keystroke instead of after 20.
144 # set quickblank
145
146 ## The regular expression that matches quoting characters in email
147 ## or line-comment introducers in source code. The default is:
148 # set quotestr "^([ ]*([!#%:;>|}]|//))+"
149
150 ## Try to work around a mismatching terminfo terminal description.
151 # set rawsequences
152
153 ## Fix Backspace/Delete confusion problem.
154 # set rebinddelete
155
156 ## Do regular-expression searches by default.
157 ## Regular expressions are of the extended type (ERE).
158 # set regexp
159
160 ## Save a changed buffer automatically on exit; don't prompt.
161 # set saveonexit
162
163 ## Put the cursor on the highlighted item in the file browser, and
164 ## show the cursor in the help viewer; useful for people who use a
165 ## braille display and people with poor vision.
166 # set showcursor
167
168 ## Make the Home key smarter: when Home is pressed anywhere but at the
169 ## very beginning of non-whitespace characters on a line, the cursor
170 ## will jump to that beginning (either forwards or backwards). If the
171 ## cursor is already at that position, it will jump to the true start
172 ## of the line (the left edge).
173 # set smarthome
174
175 ## Spread overlong lines over multiple screen lines.
176 # set softwrap
177
178 ## Scroll only the current line sideways (instead of all lines).
179 # set solosidescroll
180
181 ## Use this spelling checker instead of the internal one. This option
182 ## does not have a default value.
183 # set speller "aspell -x -c"
184
185 ## Use the end of the title bar for some state flags: I = auto-indenting,
186 ## M = mark, L = hard-wrapping long lines, R = recording, S = soft-wrapping.
187 set stateflags
188
189 ## Use this tab size instead of the default; it must be greater than 0.
190 # set tabsize 8
191
192 ## Convert each typed tab to the fitting number of spaces.
193 # set tabstospaces
194
195 ## Snip whitespace at the end of lines when justifying or hard-wrapping.
196 # set trimblanks
197
198 ## Save files always in Unix format (also when they were DOS).
199 # set unix
200
201 ## The two single-column characters used to display the first characters
202 ## of tabs and spaces. 187 in ISO 8859-1 (0000BB in Unicode) and 183 in
203 ## ISO-8859-1 (0000B7 in Unicode) seem to be good values for these.
204 ## The default when in a UTF-8 locale:
205 # set whitespace "»·"
206 ## The default otherwise:
207 # set whitespace ">."
208
209 ## Detect word boundaries differently by treating punctuation
210 ## characters as parts of words.
211 # set wordbounds
212
213 ## The characters (besides alphanumeric ones) that should be considered
214 ## as parts of words. This option does not have a default value. When
215 ## set, it overrides option 'set wordbounds'.
216 # set wordchars "<_>."
217
218 ## Let an unmodified Backspace or Delete erase the marked region (instead
219 ## of a single character, and without affecting the cutbuffer).
220 # set zap
221
222 ## Hide the bars plus help lines and use the whole terminal as edit area.
223 # set zero
224
225
226 ## Paint the interface elements of nano. These are examples; there are
227 ## no colors by default, except for errorcolor and spotlightcolor.
228 # set titlecolor bold,white,blue
229 # set promptcolor lightwhite,grey
230 # set statuscolor bold,white,green
231 # set errorcolor bold,white,red
232 # set spotlightcolor black,lightyellow
233 # set selectedcolor lightwhite,#804
234 # set stripecolor ,#444
235 # set scrollercolor slate,#222
236 # set numbercolor cyan
237 # set keycolor cyan
238 # set functioncolor green
239
240 ## In root's .nanorc you might want to use:
241 # set titlecolor bold,white,magenta
242 # set promptcolor black,yellow
243 # set statuscolor bold,white,magenta
244 # set errorcolor bold,white,red
245 # set spotlightcolor black,orange
246 # set selectedcolor lightwhite,cyan
247 # set stripecolor ,yellow
248 # set scrollercolor magenta
249 # set numbercolor magenta
250 # set keycolor lightmagenta
251 # set functioncolor magenta
252
253
254 ## === Syntax coloring ===
255 ## For all details, see 'man nanorc', section SYNTAX HIGHLIGHTING.
256
257 ## To include most of the existing syntax definitions, you can do:
258 include "/usr/share/nano/*.nanorc"
259
260 ## Or you can select just the ones you need. For example:
261 # include "/usr/share/nano/html.nanorc"
262 # include "/usr/share/nano/python.nanorc"
263 # include "/usr/share/nano/sh.nanorc"
264
265 ## In /usr/share/nano/extra/ you can find some syntaxes that are
266 ## specific for certain distros or for some less common languages.
267
268
269 ## If <Tab> should always produce four spaces when editing a Python file,
270 ## independent of the settings of 'tabsize' and 'tabstospaces':
271 # extendsyntax python tabgives " "
272
273
274 ## === Key bindings ===
275 ## For all details, see 'man nanorc', section REBINDING KEYS.
276
277 ## If you want to suspend nano with one keystroke (instead of with ^T^Z):
278 # bind ^Z suspend main
279
280 ## The <Ctrl+Delete> keystroke deletes the word to the right of the cursor.
281 ## On some terminals the <Ctrl+Backspace> keystroke produces ^H, which is
282 ## the ASCII character for backspace, so it is bound by default to the
283 ## backspace function. The <Backspace> key itself produces a different
284 ## keycode, which is hard-bound to the backspace function. So, if you
285 ## normally use <Backspace> for backspacing and not ^H, you can make
286 ## <Ctrl+Backspace> delete the word to the left of the cursor with:
287 # bind ^H chopwordleft main
288
289 ## For a more mnemonic Comment keystroke (overriding Cut-from-cursor):
290 # bind M-K comment main
291
292 ## If you want ^L to just refresh the screen and not center the cursor:
293 # bind ^L refresh main
294
295 ## When you sometimes type M-J instead of M-K, or M-T instead of M-R:
296 # unbind M-J main
297 # unbind M-T main
298 ## (Those functions are still accessible through ^T^J and ^T^V.)
299
300 ## For quickly uppercasing or lowercasing the word that the cursor is on.
301 ## (These effectively select a word and pipe it through a sed command.)
302 # bind Sh-M-U "{nextword}{mark}{prevword}{execute}| sed 's/.*/\U&/' {enter}" main
303 # bind Sh-M-L "{nextword}{mark}{prevword}{execute}| sed 's/.*/\L&/' {enter}" main
304
305 ## Two ways of copying a marked region to the system clipboard:
306 # bind Sh-M-C "{execute}| xsel -ib {enter}{undo}" main
307 # bind Sh-M-P "{execute}| xclip -select clipboard 1>&- 2>&- {enter}{undo}" main
308
309 ## For copying text to the local clipboard via OSC 52 (if terminal supports it):
310 # bind M-* "{execute}|| printf "\033]52;c;%s\007" "$(base64 | tr -d '\n')" {enter}{undo}" main
311
312 ## For normalizing Unicode to precomposed characters:
313 # bind Sh-M-N "{execute}| uconv -x nfc {enter}" main
314
315 ## For wiping all anchors in a buffer:
316 # bind Sh-M-W "{execute}| cat {enter}" main
317
318 ## For snipping trailing blanks when you save a file:
319 # bind ^S "{execute}| sed 's/\s\+$//' {enter}{savefile}" main
320
321 ## If you would like nano to have keybindings that are more "usual",
322 ## such as ^O for Open, ^F for Find, ^H for Help, and ^Q for Quit,
323 ## then uncomment these:
324 # bind ^X cut main
325 # bind ^C copy main
326 # bind ^V paste all
327 # bind ^Q exit all
328 # bind ^S savefile main
329 # bind ^W writeout main
330 # bind ^O insert main
331 # set multibuffer
332 # bind ^H help all
333 # bind ^H exit help
334 # bind ^F whereis all
335 # bind ^G findnext all
336 # bind ^B wherewas all
337 # bind ^D findprevious all
338 # bind ^R replace main
339 # unbind ^U all
340 # unbind ^N main
341 # unbind ^Y all
342 # unbind M-J main
343 # unbind M-T main
344 # bind ^A mark main
345 # bind ^P location main
346 # bind ^T gotoline main
347 # bind ^T gotodir browser
348 # bind ^T cutrestoffile execute
349 # bind ^L linter execute
350 # bind ^E execute main
351 # bind ^K "{mark}{end}{zap}" main
352 # bind ^U "{mark}{home}{zap}" main
353 # bind ^Z undo main
354 # bind ^Y redo main