Debian Codegraph @

tap/tests/ok/Makefile.in

raw
1 # Makefile.in generated by automake 1.17 from Makefile.am.
2 # @configure_input@
3
4 # Copyright (C) 1994-2025 Free Software Foundation, Inc.
5
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
9
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13 # PARTICULAR PURPOSE.
14
15 @SET_MAKE@
16 VPATH = @srcdir@
17 am__is_gnu_make = { \
18 if test -z '$(MAKELEVEL)'; then \
19 false; \
20 elif test -n '$(MAKE_HOST)'; then \
21 true; \
22 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
23 true; \
24 else \
25 false; \
26 fi; \
27 }
28 am__make_running_with_option = \
29 case $${target_option-} in \
30 ?) ;; \
31 *) echo "am__make_running_with_option: internal error: invalid" \
32 "target option '$${target_option-}' specified" >&2; \
33 exit 1;; \
34 esac; \
35 has_opt=no; \
36 sane_makeflags=$$MAKEFLAGS; \
37 if $(am__is_gnu_make); then \
38 sane_makeflags=$$MFLAGS; \
39 else \
40 case $$MAKEFLAGS in \
41 *\\[\ \ ]*) \
42 bs=\\; \
43 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
44 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
45 esac; \
46 fi; \
47 skip_next=no; \
48 strip_trailopt () \
49 { \
50 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
51 }; \
52 for flg in $$sane_makeflags; do \
53 test $$skip_next = yes && { skip_next=no; continue; }; \
54 case $$flg in \
55 *=*|--*) continue;; \
56 -*I) strip_trailopt 'I'; skip_next=yes;; \
57 -*I?*) strip_trailopt 'I';; \
58 -*O) strip_trailopt 'O'; skip_next=yes;; \
59 -*O?*) strip_trailopt 'O';; \
60 -*l) strip_trailopt 'l'; skip_next=yes;; \
61 -*l?*) strip_trailopt 'l';; \
62 -[dEDm]) skip_next=yes;; \
63 -[JT]) skip_next=yes;; \
64 esac; \
65 case $$flg in \
66 *$$target_option*) has_opt=yes; break;; \
67 esac; \
68 done; \
69 test $$has_opt = yes
70 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
71 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
72 am__rm_f = rm -f $(am__rm_f_notfound)
73 am__rm_rf = rm -rf $(am__rm_f_notfound)
74 pkgdatadir = $(datadir)/@PACKAGE@
75 pkgincludedir = $(includedir)/@PACKAGE@
76 pkglibdir = $(libdir)/@PACKAGE@
77 pkglibexecdir = $(libexecdir)/@PACKAGE@
78 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
79 install_sh_DATA = $(install_sh) -c -m 644
80 install_sh_PROGRAM = $(install_sh) -c
81 install_sh_SCRIPT = $(install_sh) -c
82 INSTALL_HEADER = $(INSTALL_DATA)
83 transform = $(program_transform_name)
84 NORMAL_INSTALL = :
85 PRE_INSTALL = :
86 POST_INSTALL = :
87 NORMAL_UNINSTALL = :
88 PRE_UNINSTALL = :
89 POST_UNINSTALL = :
90 build_triplet = @build@
91 host_triplet = @host@
92 subdir = tests/ok
93 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
94 am__aclocal_m4_deps = $(top_srcdir)/configure.in
95 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
96 $(ACLOCAL_M4)
97 DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
98 mkinstalldirs = $(install_sh) -d
99 CONFIG_CLEAN_FILES =
100 CONFIG_CLEAN_VPATH_FILES =
101 AM_V_P = $(am__v_P_@AM_V@)
102 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
103 am__v_P_0 = false
104 am__v_P_1 = :
105 AM_V_GEN = $(am__v_GEN_@AM_V@)
106 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
107 am__v_GEN_0 = @echo " GEN " $@;
108 am__v_GEN_1 =
109 AM_V_at = $(am__v_at_@AM_V@)
110 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
111 am__v_at_0 = @
112 am__v_at_1 =
113 SOURCES =
114 DIST_SOURCES =
115 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
116 ctags-recursive dvi-recursive html-recursive info-recursive \
117 install-data-recursive install-dvi-recursive \
118 install-exec-recursive install-html-recursive \
119 install-info-recursive install-pdf-recursive \
120 install-ps-recursive install-recursive installcheck-recursive \
121 installdirs-recursive pdf-recursive ps-recursive \
122 tags-recursive uninstall-recursive
123 am__can_run_installinfo = \
124 case $$AM_UPDATE_INFO_DIR in \
125 n|no|NO) false;; \
126 *) (install-info --version) >/dev/null 2>&1;; \
127 esac
128 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
129 distclean-recursive maintainer-clean-recursive
130 am__recursive_targets = \
131 $(RECURSIVE_TARGETS) \
132 $(RECURSIVE_CLEAN_TARGETS) \
133 $(am__extra_recursive_targets)
134 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
135 distdir distdir-am
136 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
137 # Read a list of newline-separated strings from the standard input,
138 # and print each of them once, without duplicates. Input order is
139 # *not* preserved.
140 am__uniquify_input = $(AWK) '\
141 BEGIN { nonempty = 0; } \
142 { items[$$0] = 1; nonempty = 1; } \
143 END { if (nonempty) { for (i in items) print i; }; } \
144 '
145 # Make sure the list of sources is unique. This is necessary because,
146 # e.g., the same source file might be shared among _SOURCES variables
147 # for different programs/libraries.
148 am__define_uniq_tagged_files = \
149 list='$(am__tagged_files)'; \
150 unique=`for i in $$list; do \
151 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
152 done | $(am__uniquify_input)`
153 DIST_SUBDIRS = $(SUBDIRS)
154 am__DIST_COMMON = $(srcdir)/Makefile.in
155 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
156 am__relativize = \
157 dir0=`pwd`; \
158 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
159 sed_rest='s,^[^/]*/*,,'; \
160 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
161 sed_butlast='s,/*[^/]*$$,,'; \
162 while test -n "$$dir1"; do \
163 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
164 if test "$$first" != "."; then \
165 if test "$$first" = ".."; then \
166 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
167 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
168 else \
169 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
170 if test "$$first2" = "$$first"; then \
171 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
172 else \
173 dir2="../$$dir2"; \
174 fi; \
175 dir0="$$dir0"/"$$first"; \
176 fi; \
177 fi; \
178 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
179 done; \
180 reldir="$$dir2"
181 ACLOCAL = @ACLOCAL@
182 AMTAR = @AMTAR@
183 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
184 AR = @AR@
185 AUTOCONF = @AUTOCONF@
186 AUTOHEADER = @AUTOHEADER@
187 AUTOMAKE = @AUTOMAKE@
188 AWK = @AWK@
189 CC = @CC@
190 CCDEPMODE = @CCDEPMODE@
191 CFLAGS = @CFLAGS@
192 CPPFLAGS = @CPPFLAGS@
193 CSCOPE = @CSCOPE@
194 CTAGS = @CTAGS@
195 CYGPATH_W = @CYGPATH_W@
196 DEFS = @DEFS@
197 DEPDIR = @DEPDIR@
198 DLLTOOL = @DLLTOOL@
199 DSYMUTIL = @DSYMUTIL@
200 DUMPBIN = @DUMPBIN@
201 ECHO_C = @ECHO_C@
202 ECHO_N = @ECHO_N@
203 ECHO_T = @ECHO_T@
204 EGREP = @EGREP@
205 ETAGS = @ETAGS@
206 EXEEXT = @EXEEXT@
207 FGREP = @FGREP@
208 FILECMD = @FILECMD@
209 GREP = @GREP@
210 INSTALL = @INSTALL@
211 INSTALL_DATA = @INSTALL_DATA@
212 INSTALL_PROGRAM = @INSTALL_PROGRAM@
213 INSTALL_SCRIPT = @INSTALL_SCRIPT@
214 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
215 LD = @LD@
216 LDFLAGS = @LDFLAGS@
217 LIBOBJS = @LIBOBJS@
218 LIBS = @LIBS@
219 LIBTOOL = @LIBTOOL@
220 LIPO = @LIPO@
221 LN_S = @LN_S@
222 LTLIBOBJS = @LTLIBOBJS@
223 LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
224 MAINT = @MAINT@
225 MAKEINFO = @MAKEINFO@
226 MANIFEST_TOOL = @MANIFEST_TOOL@
227 MKDIR_P = @MKDIR_P@
228 NM = @NM@
229 NMEDIT = @NMEDIT@
230 OBJDUMP = @OBJDUMP@
231 OBJEXT = @OBJEXT@
232 OTOOL = @OTOOL@
233 OTOOL64 = @OTOOL64@
234 PACKAGE = @PACKAGE@
235 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
236 PACKAGE_NAME = @PACKAGE_NAME@
237 PACKAGE_STRING = @PACKAGE_STRING@
238 PACKAGE_TARNAME = @PACKAGE_TARNAME@
239 PACKAGE_URL = @PACKAGE_URL@
240 PACKAGE_VERSION = @PACKAGE_VERSION@
241 PATH_SEPARATOR = @PATH_SEPARATOR@
242 RANLIB = @RANLIB@
243 SED = @SED@
244 SET_MAKE = @SET_MAKE@
245 SHELL = @SHELL@
246 STRIP = @STRIP@
247 VERSION = @VERSION@
248 abs_builddir = @abs_builddir@
249 abs_srcdir = @abs_srcdir@
250 abs_top_builddir = @abs_top_builddir@
251 abs_top_srcdir = @abs_top_srcdir@
252 ac_ct_AR = @ac_ct_AR@
253 ac_ct_CC = @ac_ct_CC@
254 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
255 am__include = @am__include@
256 am__leading_dot = @am__leading_dot@
257 am__quote = @am__quote@
258 am__rm_f_notfound = @am__rm_f_notfound@
259 am__tar = @am__tar@
260 am__untar = @am__untar@
261 am__xargs_n = @am__xargs_n@
262 bindir = @bindir@
263 build = @build@
264 build_alias = @build_alias@
265 build_cpu = @build_cpu@
266 build_os = @build_os@
267 build_vendor = @build_vendor@
268 builddir = @builddir@
269 datadir = @datadir@
270 datarootdir = @datarootdir@
271 docdir = @docdir@
272 dvidir = @dvidir@
273 exec_prefix = @exec_prefix@
274 host = @host@
275 host_alias = @host_alias@
276 host_cpu = @host_cpu@
277 host_os = @host_os@
278 host_vendor = @host_vendor@
279 htmldir = @htmldir@
280 includedir = @includedir@
281 infodir = @infodir@
282 install_sh = @install_sh@
283 libdir = @libdir@
284 libexecdir = @libexecdir@
285 localedir = @localedir@
286 localstatedir = @localstatedir@
287 mandir = @mandir@
288 mkdir_p = @mkdir_p@
289 oldincludedir = @oldincludedir@
290 pdfdir = @pdfdir@
291 prefix = @prefix@
292 program_transform_name = @program_transform_name@
293 psdir = @psdir@
294 runstatedir = @runstatedir@
295 sbindir = @sbindir@
296 sharedstatedir = @sharedstatedir@
297 srcdir = @srcdir@
298 sysconfdir = @sysconfdir@
299 target_alias = @target_alias@
300 top_build_prefix = @top_build_prefix@
301 top_builddir = @top_builddir@
302 top_srcdir = @top_srcdir@
303 SUBDIRS = ok ok-hash ok-numeric
304 all: all-recursive
305
306 .SUFFIXES:
307 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
308 @for dep in $?; do \
309 case '$(am__configure_deps)' in \
310 *$$dep*) \
311 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
312 && { if test -f $@; then exit 0; else break; fi; }; \
313 exit 1;; \
314 esac; \
315 done; \
316 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign tests/ok/Makefile'; \
317 $(am__cd) $(top_srcdir) && \
318 $(AUTOMAKE) --foreign tests/ok/Makefile
319 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
320 @case '$?' in \
321 *config.status*) \
322 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
323 *) \
324 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
325 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
326 esac;
327
328 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
329 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
330
331 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
332 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
333 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
334 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
335 $(am__aclocal_m4_deps):
336
337 mostlyclean-libtool:
338 -rm -f *.lo
339
340 clean-libtool:
341 -rm -rf .libs _libs
342
343 # This directory's subdirectories are mostly independent; you can cd
344 # into them and run 'make' without going through this Makefile.
345 # To change the values of 'make' variables: instead of editing Makefiles,
346 # (1) if the variable is set in 'config.status', edit 'config.status'
347 # (which will cause the Makefiles to be regenerated when you run 'make');
348 # (2) otherwise, pass the desired values on the 'make' command line.
349 $(am__recursive_targets):
350 @fail=; \
351 if $(am__make_keepgoing); then \
352 failcom='fail=yes'; \
353 else \
354 failcom='exit 1'; \
355 fi; \
356 dot_seen=no; \
357 target=`echo $@ | sed s/-recursive//`; \
358 case "$@" in \
359 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
360 *) list='$(SUBDIRS)' ;; \
361 esac; \
362 for subdir in $$list; do \
363 echo "Making $$target in $$subdir"; \
364 if test "$$subdir" = "."; then \
365 dot_seen=yes; \
366 local_target="$$target-am"; \
367 else \
368 local_target="$$target"; \
369 fi; \
370 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
371 || eval $$failcom; \
372 done; \
373 if test "$$dot_seen" = "no"; then \
374 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
375 fi; test -z "$$fail"
376
377 ID: $(am__tagged_files)
378 $(am__define_uniq_tagged_files); mkid -fID $$unique
379 tags: tags-recursive
380 TAGS: tags
381
382 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
383 set x; \
384 here=`pwd`; \
385 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
386 include_option=--etags-include; \
387 empty_fix=.; \
388 else \
389 include_option=--include; \
390 empty_fix=; \
391 fi; \
392 list='$(SUBDIRS)'; for subdir in $$list; do \
393 if test "$$subdir" = .; then :; else \
394 test ! -f $$subdir/TAGS || \
395 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
396 fi; \
397 done; \
398 $(am__define_uniq_tagged_files); \
399 shift; \
400 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
401 test -n "$$unique" || unique=$$empty_fix; \
402 if test $$# -gt 0; then \
403 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
404 "$$@" $$unique; \
405 else \
406 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
407 $$unique; \
408 fi; \
409 fi
410 ctags: ctags-recursive
411
412 CTAGS: ctags
413 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
414 $(am__define_uniq_tagged_files); \
415 test -z "$(CTAGS_ARGS)$$unique" \
416 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
417 $$unique
418
419 GTAGS:
420 here=`$(am__cd) $(top_builddir) && pwd` \
421 && $(am__cd) $(top_srcdir) \
422 && gtags -i $(GTAGS_ARGS) "$$here"
423 cscopelist: cscopelist-recursive
424
425 cscopelist-am: $(am__tagged_files)
426 list='$(am__tagged_files)'; \
427 case "$(srcdir)" in \
428 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
429 *) sdir=$(subdir)/$(srcdir) ;; \
430 esac; \
431 for i in $$list; do \
432 if test -f "$$i"; then \
433 echo "$(subdir)/$$i"; \
434 else \
435 echo "$$sdir/$$i"; \
436 fi; \
437 done >> $(top_builddir)/cscope.files
438
439 distclean-tags:
440 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
441 distdir: $(BUILT_SOURCES)
442 $(MAKE) $(AM_MAKEFLAGS) distdir-am
443
444 distdir-am: $(DISTFILES)
445 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
446 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
447 list='$(DISTFILES)'; \
448 dist_files=`for file in $$list; do echo $$file; done | \
449 sed -e "s|^$$srcdirstrip/||;t" \
450 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
451 case $$dist_files in \
452 */*) $(MKDIR_P) `echo "$$dist_files" | \
453 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
454 sort -u` ;; \
455 esac; \
456 for file in $$dist_files; do \
457 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
458 if test -d $$d/$$file; then \
459 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
460 if test -d "$(distdir)/$$file"; then \
461 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
462 fi; \
463 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
464 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
465 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
466 fi; \
467 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
468 else \
469 test -f "$(distdir)/$$file" \
470 || cp -p $$d/$$file "$(distdir)/$$file" \
471 || exit 1; \
472 fi; \
473 done
474 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
475 if test "$$subdir" = .; then :; else \
476 $(am__make_dryrun) \
477 || test -d "$(distdir)/$$subdir" \
478 || $(MKDIR_P) "$(distdir)/$$subdir" \
479 || exit 1; \
480 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
481 $(am__relativize); \
482 new_distdir=$$reldir; \
483 dir1=$$subdir; dir2="$(top_distdir)"; \
484 $(am__relativize); \
485 new_top_distdir=$$reldir; \
486 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
487 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
488 ($(am__cd) $$subdir && \
489 $(MAKE) $(AM_MAKEFLAGS) \
490 top_distdir="$$new_top_distdir" \
491 distdir="$$new_distdir" \
492 am__remove_distdir=: \
493 am__skip_length_check=: \
494 am__skip_mode_fix=: \
495 distdir) \
496 || exit 1; \
497 fi; \
498 done
499 check-am: all-am
500 check: check-recursive
501 all-am: Makefile
502 installdirs: installdirs-recursive
503 installdirs-am:
504 install: install-recursive
505 install-exec: install-exec-recursive
506 install-data: install-data-recursive
507 uninstall: uninstall-recursive
508
509 install-am: all-am
510 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
511
512 installcheck: installcheck-recursive
513 install-strip:
514 if test -z '$(STRIP)'; then \
515 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
516 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
517 install; \
518 else \
519 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
520 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
521 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
522 fi
523 mostlyclean-generic:
524
525 clean-generic:
526
527 distclean-generic:
528 -$(am__rm_f) $(CONFIG_CLEAN_FILES)
529 -test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
530
531 maintainer-clean-generic:
532 @echo "This command is intended for maintainers to use"
533 @echo "it deletes files that may require special tools to rebuild."
534 clean: clean-recursive
535
536 clean-am: clean-generic clean-libtool mostlyclean-am
537
538 distclean: distclean-recursive
539 -rm -f Makefile
540 distclean-am: clean-am distclean-generic distclean-tags
541
542 dvi: dvi-recursive
543
544 dvi-am:
545
546 html: html-recursive
547
548 html-am:
549
550 info: info-recursive
551
552 info-am:
553
554 install-data-am:
555
556 install-dvi: install-dvi-recursive
557
558 install-dvi-am:
559
560 install-exec-am:
561
562 install-html: install-html-recursive
563
564 install-html-am:
565
566 install-info: install-info-recursive
567
568 install-info-am:
569
570 install-man:
571
572 install-pdf: install-pdf-recursive
573
574 install-pdf-am:
575
576 install-ps: install-ps-recursive
577
578 install-ps-am:
579
580 installcheck-am:
581
582 maintainer-clean: maintainer-clean-recursive
583 -rm -f Makefile
584 maintainer-clean-am: distclean-am maintainer-clean-generic
585
586 mostlyclean: mostlyclean-recursive
587
588 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
589
590 pdf: pdf-recursive
591
592 pdf-am:
593
594 ps: ps-recursive
595
596 ps-am:
597
598 uninstall-am:
599
600 .MAKE: $(am__recursive_targets) install-am install-strip
601
602 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
603 check-am clean clean-generic clean-libtool cscopelist-am ctags \
604 ctags-am distclean distclean-generic distclean-libtool \
605 distclean-tags distdir dvi dvi-am html html-am info info-am \
606 install install-am install-data install-data-am install-dvi \
607 install-dvi-am install-exec install-exec-am install-html \
608 install-html-am install-info install-info-am install-man \
609 install-pdf install-pdf-am install-ps install-ps-am \
610 install-strip installcheck installcheck-am installdirs \
611 installdirs-am maintainer-clean maintainer-clean-generic \
612 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
613 ps ps-am tags tags-am uninstall uninstall-am
614
615 .PRECIOUS: Makefile
616
617
618 # Tell versions [3.59,3.63) of GNU make to not export all variables.
619 # Otherwise a system limit (for SysV at least) may be exceeded.
620 .NOEXPORT:
621
622 # Tell GNU make to disable its built-in pattern rules.
623 %:: %,v
624 %:: RCS/%,v
625 %:: RCS/%
626 %:: s.%
627 %:: SCCS/s.%