| 1 |
CREATE SCHEMA IF NOT EXISTS xtest; |
| 2 |
USE xtest; |
| 3 |
CREATE TABLE xtable (phrase VARCHAR(30)); |
| 4 |
INSERT INTO xtable (phrase) VALUES ('Alice has a cat'); |
| 5 |
INSERT INTO xtable (phrase) VALUES ('Bob has a dog'); |
| 6 |
|
| 7 |
## 1. Verify prep-stat status variables that are set to zero |
| 8 |
## 2. Execute cursor open |
| 9 |
# a. success for open with one parameter |
| 10 |
# b. success for open with two parameters (more than needed) |
| 11 |
# c. fails when no parameter was supplied, try to fetch using failed cursor_id |
| 12 |
# d. fails when using invalid cursor ID, try to fetch using failed cursor_id |
| 13 |
## 3. Close cursor |
| 14 |
# a. success when using ID that was already opened |
| 15 |
# b. fails when using ID that was already deallocated |
| 16 |
# c. fails when using ID that was never opened |
| 17 |
## 4. Mixed tests |
| 18 |
# a. open(curID1), close(curID1), open(curID1) - reuse already closes ID |
| 19 |
# b. open(curID1), open(curID1) - open implicit closes previous cursor |
| 20 |
# c. open(curID1, stmtID1), open(curID2, stmtID1) - curID2 closes curID1 because they use same stmtID |
| 21 |
# d. prep(stmtID1), open(curID1, stmtID1), deallocate(stmtID1), failed_fetch(curID1) - closure of prepared-statement, closes the cursor |
| 22 |
## 5. Assert status variables for new session, they should be at zero |
| 23 |
|
| 24 |
1. Verify cursor status variables |
| 25 |
================================== |
| 26 |
Verify [Status variable "Mysqlx_prep_prepare" needs to have a value of 0] |
| 27 |
Verify [Status variable "Mysqlx_cursor_open" needs to have a value of 0] |
| 28 |
Verify [Status variable "Mysqlx_cursor_close" needs to have a value of 0] |
| 29 |
Verify [Status variable "Mysqlx_cursor_fetch" needs to have a value of 0] |
| 30 |
|
| 31 |
2.a. Open cursor with valid stmt |
| 32 |
================================= |
| 33 |
RUN recvok |
| 34 |
Verify [Status variable "Mysqlx_prep_prepare" needs to have a value of 1] |
| 35 |
count('*') |
| 36 |
command ok |
| 37 |
Verify [Status variable "Mysqlx_cursor_open" needs to have a value of 1] |
| 38 |
|
| 39 |
2.b. Open cursor with valid stmt (args more than needed) |
| 40 |
========================================================= |
| 41 |
count('*') |
| 42 |
command ok |
| 43 |
Variable_name Value |
| 44 |
Mysqlx_cursor_open 2 |
| 45 |
0 rows affected |
| 46 |
Verify [Status variable "Mysqlx_cursor_open" needs to have a value of 2] |
| 47 |
|
| 48 |
2.c. Fails open cursor with valid stmt (missing arg) |
| 49 |
===================================================== |
| 50 |
Got expected error: There is no argument for statement placeholder at position: 0 (code 5134) |
| 51 |
Got expected error: Cursor with ID=102 was not opened. (code 5111) |
| 52 |
Verify [Status variable "Mysqlx_cursor_open" needs to have a value of 3] |
| 53 |
Verify [Status variable "Mysqlx_cursor_fetch" needs to have a value of 1] |
| 54 |
|
| 55 |
2.d. Fails open cursor with invalid stmt |
| 56 |
========================================= |
| 57 |
Got expected error: Statement with ID=200 was not prepared. (code 5110) |
| 58 |
Got expected error: Cursor with ID=103 was not opened. (code 5111) |
| 59 |
Verify [Status variable "Mysqlx_cursor_open" needs to have a value of 4] |
| 60 |
|
| 61 |
3.a. Close already opened cursor |
| 62 |
================================= |
| 63 |
RUN recvok |
| 64 |
1 |
| 65 |
command ok |
| 66 |
RUN recvok |
| 67 |
Verify [Status variable "Mysqlx_cursor_close" needs to have a value of 1] |
| 68 |
|
| 69 |
3.b. Fails close cursor (bad id) / try to close second time |
| 70 |
============================================================ |
| 71 |
Got expected error: |
| 72 |
Mysqlx.Error { |
| 73 |
severity: ERROR |
| 74 |
code: 5111 |
| 75 |
msg: "Cursor with ID=100 was not opened." |
| 76 |
sql_state: "HY000" |
| 77 |
} |
| 78 |
|
| 79 |
Verify [Status variable "Mysqlx_cursor_close" needs to have a value of 2] |
| 80 |
|
| 81 |
3.c. Fails close cursor (bad id/never used) |
| 82 |
============================================= |
| 83 |
Got expected error: |
| 84 |
Mysqlx.Error { |
| 85 |
severity: ERROR |
| 86 |
code: 5111 |
| 87 |
msg: "Cursor with ID=10000 was not opened." |
| 88 |
sql_state: "HY000" |
| 89 |
} |
| 90 |
|
| 91 |
Verify [Status variable "Mysqlx_cursor_close" needs to have a value of 3] |
| 92 |
|
| 93 |
4.a. Reuse deallocated cursor ID |
| 94 |
================================= |
| 95 |
RUN recvok |
| 96 |
RUN recvok |
| 97 |
3 |
| 98 |
command ok |
| 99 |
RUN recvok |
| 100 |
4 |
| 101 |
command ok |
| 102 |
|
| 103 |
4.b. Reuse ID without direct deallocation |
| 104 |
========================================== |
| 105 |
RUN recvok |
| 106 |
col1 |
| 107 |
command ok |
| 108 |
col1 |
| 109 |
command ok |
| 110 |
|
| 111 |
4.c. Same stmt can't be opened by cursor twice |
| 112 |
=============================================== |
| 113 |
RUN recvok |
| 114 |
col1 |
| 115 |
command ok |
| 116 |
col1 |
| 117 |
command ok |
| 118 |
|
| 119 |
command ok |
| 120 |
Got expected error: Cursor with ID=106 was not opened. (code 5111) |
| 121 |
Verify [Status variable "Mysqlx_cursor_fetch" needs to have a value of 4] |
| 122 |
|
| 123 |
4.d. Closure of prepared-statement, closes the cursor |
| 124 |
====================================================== |
| 125 |
RUN recvok |
| 126 |
col1 |
| 127 |
command ok |
| 128 |
Got expected error: Cursor with ID=107 was not opened. (code 5111) |
| 129 |
|
| 130 |
5. Assert status variables for new session, they should be at zero |
| 131 |
=================================================================== |
| 132 |
connecting... |
| 133 |
active session is now 's1' |
| 134 |
Verify [Status variable "Mysqlx_prep_prepare" needs to have a value of 0] |
| 135 |
Verify [Status variable "Mysqlx_cursor_open" needs to have a value of 0] |
| 136 |
Verify [Status variable "Mysqlx_cursor_close" needs to have a value of 0] |
| 137 |
Verify [Status variable "Mysqlx_cursor_fetch" needs to have a value of 0] |
| 138 |
closing session s1 |
| 139 |
Mysqlx.Ok { |
| 140 |
msg: "bye!" |
| 141 |
} |
| 142 |
ok |
| 143 |
# Syncing with status [ 'Mysqlx_connections_closed' == 2 ] |
| 144 |
# Syncing with status [ 'Mysqlx_sessions' == 0 ] |
| 145 |
|
| 146 |
## Assert global variables |
| 147 |
include/assert.inc [Global plugin variable Mysqlx_cursor_open must match number of send Mysqlx.Cursor.Open messages] |
| 148 |
include/assert.inc [Global plugin variable Mysqlx_cursor_close must match number of send Mysqlx.Cursor.Close messages] |
| 149 |
include/assert.inc [Global plugin variable Mysqlx_cursor_fetch must match number of send Mysqlx.Cursor.Fetch messages] |
| 150 |
include/assert.inc [Global system status Prepared_stmt_count must be set to zero, all prep-stmt must be deallocated.] |