| 1 |
# ==== Purpose ==== |
| 2 |
# |
| 3 |
# Verify that heartbeat events work when the position is greater than 4 GiB |
| 4 |
# |
| 5 |
# ==== Requirements ==== |
| 6 |
# |
| 7 |
# R1. If a binary log size is bigger than 4 GiB then the heartbeat event |
| 8 |
# emitted should contain the correct size. |
| 9 |
# |
| 10 |
# ==== Implementation ==== |
| 11 |
# |
| 12 |
# 1. Start only the IO_THREAD on replica and set the SOURCE_HEARTBEAT_PERIOD to |
| 13 |
# 0 in order to avoid the heartbeat_events from dump thread |
| 14 |
# 2. Create table on source. |
| 15 |
# 3. Sync the IO_THREAD on replica and stop the replica. |
| 16 |
# 4. Execute one 4 GiB transaction on connection_1 and one small transaction |
| 17 |
# on connection_2, don't commit the transactions. |
| 18 |
# 5. Set up a sync point on the source to make sure that the 2 |
| 19 |
# transactions are committed in the same commit group, with the big |
| 20 |
# transaction first and the small transaction second. |
| 21 |
# 6. Reap both transactions from connection 1 and 2. |
| 22 |
# 7. Verify that the gtid event in the source has the position greater than 4 GiB. |
| 23 |
# 8. Start the receiver thread and make it stop after receiving the first |
| 24 |
# transaction from connection 1(the 4 GiB transaction) |
| 25 |
# 9. Source enables a debug symbol that makes it hit an assertion in case it |
| 26 |
# sends a heartbeat event with a position smaller than 4 GiB. |
| 27 |
# 10.Replica starts the IO thread again. It uses the auto-position protocol, |
| 28 |
# and therefore the dump thread will emit a heartbeat event after skipping |
| 29 |
# the 4 GiB transaction (in order to notify the receiver of the position). |
| 30 |
# 11.Verify that we received exactly 1 heartbeat event after step 8 by |
| 31 |
# inspecting performance_schema.replication_connection_status |
| 32 |
# 12.Cleanup |
| 33 |
# |
| 34 |
# ==== References ==== |
| 35 |
# |
| 36 |
# Bug#33615584: Add mtr test to generate heartbeat_event in 4 gb binlog file |
| 37 |
# for Bug#29913991 |
| 38 |
|
| 39 |
--source include/big_test.inc |
| 40 |
--source include/have_debug.inc |
| 41 |
--source include/have_debug_sync.inc |
| 42 |
--source include/have_binlog_format_row.inc |
| 43 |
|
| 44 |
--let $rpl_skip_start_slave = 1 |
| 45 |
--let $rpl_extra_connections_per_server = 2 |
| 46 |
--source include/master-slave.inc |
| 47 |
# 1. Start only the IO_THREAD on replica and set the SOURCE_HEARTBEAT_PERIOD to |
| 48 |
# 0 in order to avoid the heartbeat_events from dump thread |
| 49 |
--source include/rpl_connection_slave.inc |
| 50 |
CHANGE REPLICATION SOURCE TO SOURCE_HEARTBEAT_PERIOD=0; |
| 51 |
--source include/start_slave_io.inc |
| 52 |
|
| 53 |
--source include/rpl_connection_master.inc |
| 54 |
# 2. Create tables on source. |
| 55 |
CREATE TABLE t (a LONGBLOB); |
| 56 |
--source include/save_binlog_position.inc |
| 57 |
|
| 58 |
# 3. Sync the IO_THREAD on replica and stop the replica |
| 59 |
--source include/sync_slave_io_with_master.inc |
| 60 |
--source include/stop_slave_io.inc |
| 61 |
|
| 62 |
# 4. Execute one 4 GiB transaction on connection_1 and one small transaction |
| 63 |
# on connection_2, don't commit the transaction. |
| 64 |
|
| 65 |
# Start one transaction that is a little more than 4 GiB |
| 66 |
# (actually exactly 4 GiB row data, plus a bit of per-event overhead). |
| 67 |
# Split it into 128 statements, each 32 MiB, to keep within default |
| 68 |
# limits. |
| 69 |
--let $four_gib = `SELECT 1 << 32` |
| 70 |
--let $statement_count = 128 |
| 71 |
--let $statement_size = `SELECT $four_gib DIV $statement_count` |
| 72 |
--disable_query_log |
| 73 |
|
| 74 |
--connection server_1_1 |
| 75 |
BEGIN; |
| 76 |
--let $i = 0 |
| 77 |
while ($i < $statement_count) { |
| 78 |
eval INSERT INTO t VALUES (REPEAT('a', $statement_size)); |
| 79 |
--inc $i |
| 80 |
} |
| 81 |
--enable_query_log |
| 82 |
# On a different connection, start a small transaction. |
| 83 |
--connection server_1_2 |
| 84 |
BEGIN; |
| 85 |
INSERT INTO t VALUES ('Hi!'); |
| 86 |
# 5. Set up a sync point on the source to make sure that the 2 |
| 87 |
# transactions are committed in the same commit group, with the big |
| 88 |
# transaction first and the small transaction second. |
| 89 |
|
| 90 |
--let $sync_point = bgc_after_enrolling_for_flush_stage |
| 91 |
--let $statement = COMMIT |
| 92 |
--let $auxiliary_connection = default |
| 93 |
|
| 94 |
--let $statement_connection = server_1_1 |
| 95 |
--source include/execute_to_sync_point.inc |
| 96 |
--let $statement_connection = server_1_2 |
| 97 |
--source include/execute_to_sync_point.inc |
| 98 |
# Release the transactions from their sync points. |
| 99 |
--let $skip_reap = 1 |
| 100 |
|
| 101 |
--let $statement_connection = server_1_1 |
| 102 |
--source include/execute_from_sync_point.inc |
| 103 |
--let $statement_connection = server_1_2 |
| 104 |
--source include/execute_from_sync_point.inc |
| 105 |
|
| 106 |
# 6. Reap both transactions from connection 1 and 2. |
| 107 |
|
| 108 |
--connection server_1_1 |
| 109 |
--reap |
| 110 |
--connection server_1_2 |
| 111 |
--reap |
| 112 |
|
| 113 |
# 7. Verify that the gtid event in the source has the position greater than 4 GiB. |
| 114 |
|
| 115 |
# The binlog should contain: |
| 116 |
# GTID |
| 117 |
# BEGIN |
| 118 |
# ( Table_map + Write_rows ) * 128 |
| 119 |
# Xid |
| 120 |
# GTID |
| 121 |
# BEGIN |
| 122 |
# Table_map + Write_rows |
| 123 |
# Xid |
| 124 |
# So the second GTID is the (2 + 2 * 128 + 1 + 1)'st event. |
| 125 |
--let $second_gtid_type = query_get_value("SHOW BINLOG EVENTS IN '$binlog_file' FROM $binlog_position LIMIT 259, 1", Event_type, 1) |
| 126 |
--let $assert_cond = "$second_gtid_type" = "Gtid" |
| 127 |
--let $assert_text = The event we think is the second GTID, should actually be the second GTID |
| 128 |
--source include/assert.inc |
| 129 |
|
| 130 |
--let $second_gtid_position = query_get_value("SHOW BINLOG EVENTS IN '$binlog_file' FROM $binlog_position LIMIT 259, 1", Pos, 1) |
| 131 |
--let $assert_cond = $second_gtid_position > $four_gib |
| 132 |
--let $assert_text = The second GTID event should have position > 4 GiB |
| 133 |
--source include/assert.inc |
| 134 |
|
| 135 |
# 8. Start the receiver thread and make it stop after receiving the first |
| 136 |
# transaction from connection 1(the 4 GiB transaction) |
| 137 |
|
| 138 |
--source include/rpl_connection_slave.inc |
| 139 |
--let $rpl_after_received_events_action= stop |
| 140 |
--let $rpl_event_count= 2 |
| 141 |
--let $rpl_count_only_event_type= Gtid |
| 142 |
--source include/rpl_receive_event_count.inc |
| 143 |
|
| 144 |
--let $rcvd_heartbeats_before= query_get_value(select count_received_heartbeats from performance_schema.replication_connection_status, count_received_heartbeats, 1) |
| 145 |
|
| 146 |
# 9. Source enables a debug symbol that makes it hit an assertion in case it |
| 147 |
# sends a heartbeat event with a position smaller than 4 GiB. |
| 148 |
|
| 149 |
--source include/rpl_connection_master.inc |
| 150 |
--let $debug_point = heartbeat_event_with_position_greater_than_4_gb |
| 151 |
--source include/add_debug_point.inc |
| 152 |
|
| 153 |
# 10. Replica starts the IO thread again. It uses the auto-position protocol, |
| 154 |
# and therefore the dump thread will emit a heartbeat event after skipping |
| 155 |
# the 4 GiB transaction (in order to notify the receiver of the position). |
| 156 |
|
| 157 |
--source include/rpl_connection_slave.inc |
| 158 |
--source include/start_slave_io.inc |
| 159 |
--source include/rpl_connection_master.inc |
| 160 |
--source include/sync_slave_io_with_master.inc |
| 161 |
|
| 162 |
# 11.Verify that we received exactly 1 heartbeat event after step 8 by |
| 163 |
# inspecting performance_schema.replication_connection_status |
| 164 |
--let $rcvd_heartbeats_after= query_get_value(select count_received_heartbeats from performance_schema.replication_connection_status, count_received_heartbeats, 1) |
| 165 |
|
| 166 |
--let $result= query_get_value(SELECT ($rcvd_heartbeats_after - $rcvd_heartbeats_before) AS Result, Result, 1) |
| 167 |
--let $assert_cond = $rcvd_heartbeats_after - $rcvd_heartbeats_before = 1 |
| 168 |
--let $assert_text = Exactly 1 heartbeat event occurred |
| 169 |
--source include/assert.inc |
| 170 |
|
| 171 |
# 12. Cleanup |
| 172 |
--source include/rpl_connection_master.inc |
| 173 |
--let $debug_point = heartbeat_event_with_position_greater_than_4_gb |
| 174 |
--source include/remove_debug_point.inc |
| 175 |
DROP TABLE t; |
| 176 |
|
| 177 |
--let $rpl_only_running_threads = 1 |
| 178 |
--source include/rpl_end.inc |