| 1 |
############################################################################### |
| 2 |
# Bug#26274274: IGNORE EXPIRE_LOGS_DAYS IF BINLOG_EXPIRE_LOGS_SECONDS IS SET # |
| 3 |
# # |
| 4 |
# This test case will test setting binlog_expire_logs_seconds and # |
| 5 |
# expire_logs_days either as start up parameter or as dynamic global # |
| 6 |
# variables, verifying that proper warning and error is thrown by the server. # |
| 7 |
# # |
| 8 |
# Bug#27252658: CHANGE DEFAULT VALUE OF BINLOG_EXPIRE_LOGS_SECONDS # |
| 9 |
# # |
| 10 |
# Here we will also test if the default value of binlog_expire_logs_seconds # |
| 11 |
# and expire_logs_days is used as accoradance to the rule as mentioned below # |
| 12 |
# with title Bug#27252658. # |
| 13 |
# # |
| 14 |
# These cases will be tested here. # |
| 15 |
# # |
| 16 |
# 1) expire_logs_days (>0) binlog_expire_logs_seconds (>0) # |
| 17 |
# This case will check the following: # |
| 18 |
# 1.1) The value of expire_logs_days is ignored and the purge time was # |
| 19 |
# calculated only using binlog_expire_logs_seconds value. # |
| 20 |
# 1.2) There is an error while trying to set binlog_expire_logs_seconds # |
| 21 |
# and expire_logs_days dynamically. # |
| 22 |
# 1.3) A warning message is printed describing the ignored value of # |
| 23 |
# expire_logs_days when used together with binlog_expire_logs_seconds # |
| 24 |
# 1.4) Bug#27252658: # |
| 25 |
# If user provides values for both options, both variables are set # |
| 26 |
# accordingly and 'binlog_expire_logs_seconds' takes effect. # |
| 27 |
# # |
| 28 |
# 2) expire_logs_days (>0) binlog_expire_logs_seconds (=0) # |
| 29 |
# This case will check the following: # |
| 30 |
# 2.1) The value of expire_logs_days is used when # |
| 31 |
# binlog_expire_logs_seconds is not set or set to 0 # |
| 32 |
# 2.2) No warning message is printed in this case as the user has not # |
| 33 |
# specified any value for binlog_expire_logs_seconds. # |
| 34 |
# 2.3) Bug#27252658: # |
| 35 |
# If user provides a value for only one of the options,that particular# |
| 36 |
# variable is set accordingly, and the other variable defaults to 0. # |
| 37 |
# # |
| 38 |
# 3) expire_logs_days (=0) binlog_expire_logs_seconds (>0) # |
| 39 |
# This case will check the following: # |
| 40 |
# 3.1) No warning message is printed in this case as the user has not # |
| 41 |
# specified any value for expire_logs_days. # |
| 42 |
# 3.2) Bug#27252658: # |
| 43 |
# If user provides a value for only one of the options,that particular# |
| 44 |
# variable is set accordingly, and the other variable defaults to 0. # |
| 45 |
# # |
| 46 |
# 4) expire_logs_days (=0) or binlog_expire_logs_seconds (=0) # |
| 47 |
# Bug#27252658: # |
| 48 |
# This case will check the following: # |
| 49 |
# 4.1) Nothing should be purged at restart when any one of the variable is # |
| 50 |
# set to 0 and other variable is not specified at start. # |
| 51 |
# 4.2) If one of these variable is set to zero and other is not specified # |
| 52 |
# at start up then there will not be any purging. # |
| 53 |
# 4.3) Both the variable are set to 0. # |
| 54 |
# # |
| 55 |
# 5) expire_logs_days and binlog_expire_logs_seconds both not specified # |
| 56 |
# This case will check the following: # |
| 57 |
# 5.1) Bug#27252658: # |
| 58 |
# If user does not provide a value for any of the options, then # |
| 59 |
# 'binlog_expire_logs_seconds' defaults to 30*24*60*60 and # |
| 60 |
# 'expire_logs_days' to 0. # |
| 61 |
############################################################################### |
| 62 |
|
| 63 |
|
| 64 |
# Test in this file is binlog format agnostic, thus no need |
| 65 |
# to rerun it for every format. |
| 66 |
--source include/have_binlog_format_row.inc |
| 67 |
--source include/linux.inc |
| 68 |
|
| 69 |
CALL mtr.add_suppression("The option expire_logs_days cannot be used together*"); |
| 70 |
--let $saved_expire_logs_days= `SELECT @@GLOBAL.expire_logs_days` |
| 71 |
--let $saved_binlog_expire_logs_seconds= `SELECT @@GLOBAL.binlog_expire_logs_seconds` |
| 72 |
# Set the datadir |
| 73 |
--let $MYSQLD_DATADIR= `SELECT @@datadir` |
| 74 |
--let $ofile= $MYSQLTEST_VARDIR/tmp/binlog_deprecations-output.err |
| 75 |
|
| 76 |
--echo #### |
| 77 |
--echo #### Case 1: |
| 78 |
--echo #### |
| 79 |
|
| 80 |
--echo #### Case 1.1: |
| 81 |
|
| 82 |
# Restart the server with expire_logs_days (>0) binlog_expire_logs_seconds (>0) |
| 83 |
# Here we have set binlog_expire_logs_seconds as well so expire_logs_days will |
| 84 |
# be ignored and the purge will happen. |
| 85 |
|
| 86 |
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR |
| 87 |
|
| 88 |
--let $restart_parameters=restart:--binlog_expire_logs_seconds=2 --expire_logs_days=1 --log-error=$ofile |
| 89 |
--source include/restart_mysqld.inc |
| 90 |
--let $first_binlog_file= query_get_value(SHOW MASTER STATUS, File, 1) |
| 91 |
FLUSH LOGS; |
| 92 |
# Sleep for twice of binlog_expire_logs_seconds value |
| 93 |
--sleep 4 |
| 94 |
--file_exists $MYSQLD_DATADIR/$first_binlog_file |
| 95 |
FLUSH LOGS; |
| 96 |
--error 1 |
| 97 |
--file_exists $MYSQLD_DATADIR/$first_binlog_file |
| 98 |
|
| 99 |
--echo #### Case 1.2: |
| 100 |
|
| 101 |
# There should be an error while setting the variables dynamically. |
| 102 |
--error ER_BINLOG_EXPIRE_LOG_DAYS_AND_SECS_USED_TOGETHER |
| 103 |
SET GLOBAL expire_logs_days= 10; |
| 104 |
--echo #### Case 1.3: |
| 105 |
|
| 106 |
# Check if the warning is there in the error log when expire_logs_days is used along |
| 107 |
# with binlog_expire_logs_seconds. |
| 108 |
|
| 109 |
--let $assert_text= Assert that there is a warning at bootstrap for expire_logs_days |
| 110 |
--let $assert_file= $ofile |
| 111 |
--let $assert_select= The option expire_logs_days cannot be used together with option binlog_expire_logs_seconds. |
| 112 |
--let $assert_count= 1 |
| 113 |
--source include/assert_grep.inc |
| 114 |
|
| 115 |
--echo #### Case 1.4 |
| 116 |
|
| 117 |
# Check if the value of expire_logs_days is changed to 0. |
| 118 |
--let $expire_logs_days_value = `SELECT @@GLOBAL.expire_logs_days` |
| 119 |
--let $assert_cond = $expire_logs_days_value = 0 |
| 120 |
--let $assert_text = The value of expire_logs_days is not changed. |
| 121 |
--source include/assert.inc |
| 122 |
|
| 123 |
# Check if the value of binlog_expire_logs_seconds is not changed. |
| 124 |
--let $binlog_expire_logs_seconds_value = `SELECT @@GLOBAL.binlog_expire_logs_seconds` |
| 125 |
--let $assert_cond = $binlog_expire_logs_seconds_value = 2 |
| 126 |
--let $assert_text = The value of binlog_expire_logs_seconds is not changed. |
| 127 |
--source include/assert.inc |
| 128 |
|
| 129 |
--echo #### |
| 130 |
--echo #### Case 2: |
| 131 |
--echo #### |
| 132 |
|
| 133 |
--echo #### Case 2.1: |
| 134 |
|
| 135 |
# Restart the server with expire_logs_days (>0) & binlog_expire_logs_seconds (=0) |
| 136 |
# Here we have not set binlog_expire_logs_seconds as well so expire_logs_days will |
| 137 |
# not be ignored and the purge will not happen. |
| 138 |
--remove_file $ofile |
| 139 |
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR |
| 140 |
|
| 141 |
--let $restart_parameters=restart: --expire_logs_days=1 --binlog_expire_logs_seconds=0 --log-error=$ofile |
| 142 |
--source include/restart_mysqld.inc |
| 143 |
--let $first_binlog_file= query_get_value(SHOW MASTER STATUS, File, 1) |
| 144 |
FLUSH LOGS; |
| 145 |
--sleep 4 |
| 146 |
--file_exists $MYSQLD_DATADIR/$first_binlog_file |
| 147 |
FLUSH LOGS; |
| 148 |
#The file still exists |
| 149 |
--file_exists $MYSQLD_DATADIR/$first_binlog_file |
| 150 |
|
| 151 |
--echo #### Case 2.2: |
| 152 |
|
| 153 |
# Check if the warning is not there in the error log when binlog_expire_logs_seconds |
| 154 |
# is not used (or have a value = 0) with expire_logs_days. |
| 155 |
|
| 156 |
# When binlog_expire_logs_seconds is specified a value '0' (same as the above in restart command) |
| 157 |
--let $assert_text= There is no warning at server start when binlog_expire_logs_seconds is not set. |
| 158 |
--let $assert_file= $ofile |
| 159 |
--let $assert_select= The option expire_logs_days cannot be used together with option binlog_expire_logs_seconds. |
| 160 |
--let $assert_count= 0 |
| 161 |
--source include/assert_grep.inc |
| 162 |
|
| 163 |
# When binlog_expire_logs_seconds is not specified |
| 164 |
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR |
| 165 |
--let $restart_parameters=restart: --expire_logs_days=1 --log-error=$ofile |
| 166 |
--source include/restart_mysqld.inc |
| 167 |
|
| 168 |
--let $assert_text= There is no warning at server start when binlog_expire_logs_seconds is not set. |
| 169 |
--let $assert_file= $ofile |
| 170 |
--let $assert_select= The option expire_logs_days cannot be used together with option binlog_expire_logs_seconds. |
| 171 |
--let $assert_count= 0 |
| 172 |
--source include/assert_grep.inc |
| 173 |
|
| 174 |
--echo #### Case 2.3 |
| 175 |
|
| 176 |
# Check if the value of expire_logs_days is not changed. |
| 177 |
--let $expire_logs_days_value = `SELECT @@GLOBAL.expire_logs_days` |
| 178 |
--let $assert_cond = $expire_logs_days_value = 1 |
| 179 |
--let $assert_text = The value of expire_logs_days is not changed. |
| 180 |
--source include/assert.inc |
| 181 |
|
| 182 |
# Check if the value of binlog_expire_logs_seconds is set to 0 and not 30 (the default value). |
| 183 |
--let $binlog_expire_logs_seconds_value = `SELECT @@GLOBAL.binlog_expire_logs_seconds` |
| 184 |
--let $assert_cond = $binlog_expire_logs_seconds_value = 0 |
| 185 |
--let $assert_text = The value of binlog_expire_logs_seconds is changed from default 2592000 to 0 . |
| 186 |
--source include/assert.inc |
| 187 |
|
| 188 |
--echo #### |
| 189 |
--echo #### Case 3: |
| 190 |
--echo #### |
| 191 |
|
| 192 |
--echo #### Case 3.1: |
| 193 |
# Check if the warning is not there in the error log when expire_logs_days is not used (or |
| 194 |
# have a value = 0) with binlog_expire_logs_seconds. |
| 195 |
|
| 196 |
# When expire_logs_days is specified a value '0' |
| 197 |
|
| 198 |
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR |
| 199 |
--let $restart_parameters=restart: --binlog_expire_logs_seconds=5 --expire_logs_days=0 --log-error=$ofile |
| 200 |
--source include/restart_mysqld.inc |
| 201 |
|
| 202 |
--let $assert_text= There is a no warning at server start for expire_logs_days |
| 203 |
--let $assert_file= $ofile |
| 204 |
--let $assert_select= The option expire_logs_days cannot be used together with option binlog_expire_logs_seconds. |
| 205 |
--let $assert_count= 0 |
| 206 |
--source include/assert_grep.inc |
| 207 |
|
| 208 |
# When expire_logs_days is not specified |
| 209 |
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR |
| 210 |
--let $restart_parameters=restart: --binlog_expire_logs_seconds=5 --log-error=$ofile |
| 211 |
--source include/restart_mysqld.inc |
| 212 |
|
| 213 |
--let $assert_text= There is a no warning at server start for expire_logs_days |
| 214 |
--let $assert_file= $ofile |
| 215 |
--let $assert_select= The option expire_logs_days cannot be used together with option binlog_expire_logs_seconds. |
| 216 |
--let $assert_count= 0 |
| 217 |
--source include/assert_grep.inc |
| 218 |
|
| 219 |
--echo #### Case 3.2 |
| 220 |
|
| 221 |
# Check if the value of expire_logs_days is set to 0 (The default value). |
| 222 |
--let $expire_logs_days_value = `SELECT @@GLOBAL.expire_logs_days` |
| 223 |
--let $assert_cond = $expire_logs_days_value = 0 |
| 224 |
--let $assert_text = The value of expire_logs_days is 0. |
| 225 |
--source include/assert.inc |
| 226 |
|
| 227 |
# Check if the value of binlog_expire_logs_seconds is not changed. |
| 228 |
--let $binlog_expire_logs_seconds_value = `SELECT @@GLOBAL.binlog_expire_logs_seconds` |
| 229 |
--let $assert_cond = $binlog_expire_logs_seconds_value = 5 |
| 230 |
--let $assert_text = The value of binlog_expire_logs_seconds is not changed. |
| 231 |
--source include/assert.inc |
| 232 |
|
| 233 |
--echo #### |
| 234 |
--echo #### Case 4: |
| 235 |
--echo #### |
| 236 |
|
| 237 |
--echo #### Case 4.1: server start should not purge the file |
| 238 |
--let $first_binlog_file= query_get_value(SHOW MASTER STATUS, File, 1) |
| 239 |
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR |
| 240 |
--let $restart_parameters=restart: --log-error=$ofile --expire_logs_days=0 |
| 241 |
--source include/restart_mysqld.inc |
| 242 |
|
| 243 |
--file_exists $MYSQLD_DATADIR/$first_binlog_file |
| 244 |
|
| 245 |
--echo #### Case 4.2: flush logs should not purge the file |
| 246 |
--let $first_binlog_file= query_get_value(SHOW MASTER STATUS, File, 1) |
| 247 |
FLUSH LOGS; |
| 248 |
--sleep 4 |
| 249 |
--file_exists $MYSQLD_DATADIR/$first_binlog_file |
| 250 |
FLUSH LOGS; |
| 251 |
#The file still exists |
| 252 |
--file_exists $MYSQLD_DATADIR/$first_binlog_file |
| 253 |
|
| 254 |
--echo #### Case 4.3 |
| 255 |
|
| 256 |
# Check if the value of binlog_expire_logs_seconds is set to 0 and not 30*24*60*60 (the default value). |
| 257 |
|
| 258 |
--let $binlog_expire_logs_seconds_value = `SELECT @@GLOBAL.binlog_expire_logs_seconds` |
| 259 |
--let $assert_cond = $binlog_expire_logs_seconds_value = 0 |
| 260 |
--let $assert_text = The value of binlog_expire_logs_seconds is changed to 0. |
| 261 |
--source include/assert.inc |
| 262 |
|
| 263 |
|
| 264 |
--echo #### |
| 265 |
--echo #### Case 5: |
| 266 |
--echo #### |
| 267 |
|
| 268 |
--echo #### Case 5.1 |
| 269 |
|
| 270 |
--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR |
| 271 |
--let $restart_parameters=restart: --log-error=$ofile |
| 272 |
--source include/restart_mysqld.inc |
| 273 |
# Check if the value of expire_logs_days is set to 0 (the default value). |
| 274 |
# And the value of binlog_expire_logs_seconds is set to 30*24*60*60 |
| 275 |
|
| 276 |
--let $expire_logs_days_value = `SELECT @@GLOBAL.expire_logs_days` |
| 277 |
--let $assert_cond = $expire_logs_days_value = 0 |
| 278 |
--let $assert_text = The value of expire_logs_days is 0. |
| 279 |
--source include/assert.inc |
| 280 |
|
| 281 |
--let $binlog_expire_logs_seconds_value = `SELECT @@GLOBAL.binlog_expire_logs_seconds` |
| 282 |
--let $assert_cond = $binlog_expire_logs_seconds_value = 2592000 |
| 283 |
--let $assert_text = The value of binlog_expire_logs_seconds is changed to 2592000(30 days). |
| 284 |
--source include/assert.inc |
| 285 |
|
| 286 |
# reset the variables |
| 287 |
--eval SET GLOBAL binlog_expire_logs_seconds= $saved_binlog_expire_logs_seconds |
| 288 |
--eval SET GLOBAL expire_logs_days= $saved_expire_logs_days |
| 289 |
|
| 290 |
# Restore default settings |
| 291 |
--let $restart_parameters = restart: |
| 292 |
--source include/restart_mysqld.inc |
| 293 |
|
| 294 |
--remove_file $MYSQLTEST_VARDIR/tmp/binlog_deprecations-output.err |