| 1 |
AEOLUS 0.8.4 RELEASE NOTES 14/03/2010 |
| 2 |
============================ |
| 3 |
|
| 4 |
* Five new temperaments provided by Hanno Hoffstadt |
| 5 |
and Adam Sampson. |
| 6 |
* Added -s option to select Jack server. |
| 7 |
* Now using libclalsdrv-2.0.0. |
| 8 |
* Compiles without warnings with gcc-4.4.3. |
| 9 |
|
| 10 |
|
| 11 |
AEOLUS 0.8.0 RELEASE NOTES 29/01/2008 |
| 12 |
============================ |
| 13 |
|
| 14 |
**** Experimental release. **** |
| 15 |
|
| 16 |
* Requires JACK >= 0.109 |
| 17 |
* Receives MIDI over JACK and via ALSA sequencer. |
| 18 |
* -C option has been removed, use AmbDec instead. |
| 19 |
* -B option via ALSA removed. |
| 20 |
|
| 21 |
|
| 22 |
|
| 23 |
AEOLUS 0.6.6 RELEASE NOTES |
| 24 |
============================ |
| 25 |
|
| 26 |
|
| 27 |
1. The stops directory |
| 28 |
---------------------- |
| 29 |
|
| 30 |
The aeolus binary itself is a generic organ synth and |
| 31 |
does not define any instrument. In order to use Aeolus |
| 32 |
you need a directory containing definitions of stops |
| 33 |
and of an instrument. The one supplied with the current |
| 34 |
release has this structure: |
| 35 |
|
| 36 |
|
| 37 |
stops-0.3.0 |
| 38 |
| |
| 39 |
|___ Aeolus |
| 40 |
| | |
| 41 |
| |____ definition |
| 42 |
| |____ presets |
| 43 |
| |
| 44 |
|___ Aeolus1 |
| 45 |
| | |
| 46 |
| |____ definition |
| 47 |
| |____ presets |
| 48 |
| |
| 49 |
|___ Aeolus2 |
| 50 |
| | |
| 51 |
| |____ definition |
| 52 |
| |____ presets |
| 53 |
| |
| 54 |
|___ ***.ae0 |
| 55 |
|___ ***.ae0 |
| 56 |
|___ ***.ae0 |
| 57 |
|___ ... |
| 58 |
| |
| 59 |
|___ waves |
| 60 |
| |
| 61 |
|___ ***.ae1 |
| 62 |
|___ ***.ae1 |
| 63 |
|___ ***.ae1 |
| 64 |
|___ ... |
| 65 |
|
| 66 |
|
| 67 |
The 'Aeolus' directory is the default instrument |
| 68 |
directory. It contains two files: a 'definition' |
| 69 |
file that specifies the layout of the organ, and |
| 70 |
'presets' that contains registration and midi presets. |
| 71 |
|
| 72 |
There can be more than one instrument definition |
| 73 |
directory (in fact there are two more examples |
| 74 |
in the supplied stops-0.3.0). These can be selected |
| 75 |
with a command line option (see below). |
| 76 |
|
| 77 |
The data in 'presets' only makes sense for one |
| 78 |
particular instrument, and that's why these files |
| 79 |
are kept together with the corresponding instrument |
| 80 |
definition. For binary distributions, there is a |
| 81 |
configuration option that will make Aeolus save the |
| 82 |
presets in the users's home (see below). This will |
| 83 |
allow the user to save presets for one instrument. |
| 84 |
|
| 85 |
The *.ae0 files contain parameters for the additive |
| 86 |
synthesis. There is one such file for each rank of |
| 87 |
pipes in the organ. These are binary files and they |
| 88 |
should not be edited. 'Power users' can use the built-in |
| 89 |
synthesis editor to modify them (see section 5). |
| 90 |
|
| 91 |
The waves directory will be empty initially. When |
| 92 |
Aeolus starts up, it will compute wavetables, one for |
| 93 |
each pipe. This is indicated by the flashing stop buttons. |
| 94 |
The same will happen whenever the tuning or temperament is |
| 95 |
changed. These wavetables can be saved (so Aeolus will be |
| 96 |
ready for use much faster next time), but only if the stops |
| 97 |
directory is writeable for the user. This will not be the |
| 98 |
case for a binary installation as the stops dir will be |
| 99 |
system-wide (e.g. /usr/share/Aeolus/stops-0.3.0). |
| 100 |
|
| 101 |
In order to be able to save wavetables or edited stops |
| 102 |
the stops directory must be copied to a location where |
| 103 |
it can be modified by the user, (e.g. ~/stops-0.3.0). |
| 104 |
|
| 105 |
|
| 106 |
2. Run-time configuration |
| 107 |
------------------------- |
| 108 |
|
| 109 |
Aeolus takes run-time options from three sources: |
| 110 |
|
| 111 |
* the file /etc/aeolus.conf |
| 112 |
* the file ~/.aeolusrc |
| 113 |
* command line options |
| 114 |
|
| 115 |
Apart from empty lines and comments (lines starting with '#') |
| 116 |
either of the files should just contain the command line options |
| 117 |
you want to use, on a single line (examples given below). |
| 118 |
|
| 119 |
If the file in the home directory exists (even empty) then the |
| 120 |
one in /etc is not used. Options given on the command line override |
| 121 |
those given in either file. |
| 122 |
|
| 123 |
Command line options are: |
| 124 |
|
| 125 |
(audio interface) |
| 126 |
|
| 127 |
-J Use JACK. This is also the default. The option |
| 128 |
can be used to override a -A in the files. |
| 129 |
|
| 130 |
-A Use ALSA. Aeolus should work with the "default" |
| 131 |
device, but in recent ALSA releases this has a |
| 132 |
very large buffer size, and this may result in |
| 133 |
excessive latency. Use of a hardware device and |
| 134 |
the options below is recommended. |
| 135 |
|
| 136 |
Sub-options for ALSA and their defaults are: |
| 137 |
|
| 138 |
-d <device> (default) |
| 139 |
-r <sample rate> (48000) |
| 140 |
-p <period size> (1024) |
| 141 |
-n <number of periods> (2) |
| 142 |
|
| 143 |
(output channels) |
| 144 |
|
| 145 |
-C <number of channels> |
| 146 |
|
| 147 |
The default is 2 (stereo). Other legal values |
| 148 |
are 4 for four speakers in a square and 8 for |
| 149 |
eight speaker in cube setup. The built-in |
| 150 |
Ambisonics decoder used for the latter two |
| 151 |
formats is quite primitive and will be removed |
| 152 |
in future versions, to be replaced with a much |
| 153 |
better external application. |
| 154 |
|
| 155 |
Speaker order for -C 4 is clockwise starting at |
| 156 |
front-left. For -C 8 the first four outputs are |
| 157 |
the 'bottom' speakers, and the next four the |
| 158 |
'top' ones, each of them in the same order as |
| 159 |
for -C 4. |
| 160 |
|
| 161 |
-B This options selects direct Ambisionics first order |
| 162 |
B-format output, to be used for recording or with |
| 163 |
an external decoder. |
| 164 |
|
| 165 |
(resources) |
| 166 |
|
| 167 |
-S <stops directory> |
| 168 |
|
| 169 |
The default is ./stops. |
| 170 |
|
| 171 |
-I <instrument directory> |
| 172 |
|
| 173 |
This is relative to the stops directory. |
| 174 |
The default is 'Aeolus'. |
| 175 |
|
| 176 |
-W <waves directory> |
| 177 |
|
| 178 |
This is relative to the stops directory. |
| 179 |
The default is 'waves'. This options mainly exists |
| 180 |
for use during development and should not be used. |
| 181 |
|
| 182 |
-u This option is for use with binary distributions |
| 183 |
only. When used, the presets file will be stored |
| 184 |
into the user's home directory instead of within |
| 185 |
the system wide instrument directory. |
| 186 |
|
| 187 |
(general) |
| 188 |
|
| 189 |
-t Selects the text mode user interface. With this |
| 190 |
option Aeolus does not in any way depend on X11. |
| 191 |
In the current version the text mode UI is just |
| 192 |
an empty stub and should not be used. |
| 193 |
|
| 194 |
-h Prints version information and a summary of all |
| 195 |
command line options. |
| 196 |
|
| 197 |
|
| 198 |
For example if you always use Aeolus with ALSA device hw:0, |
| 199 |
using 3 periods of 512 frames and a sample rate of 44.1 kHz, |
| 200 |
and you have copied the stops directory to your home, then |
| 201 |
your ~/.aeolusrc could look like this: |
| 202 |
|
| 203 |
# Aeolus default options |
| 204 |
-A -d hw:0 -n 2 -p 512 -r 44100 -S /home/login/stops-0.3.0 |
| 205 |
|
| 206 |
where 'login' is your login name. |
| 207 |
|
| 208 |
|
| 209 |
3. Binary packages |
| 210 |
------------------ |
| 211 |
|
| 212 |
This release permits packagers to install a working Aeolus |
| 213 |
without touching a users's home directory, as follows. |
| 214 |
|
| 215 |
* Install the aeolus binary in /usr/bin and the two |
| 216 |
plugins in /usr/lib. |
| 217 |
* Install the stops directory in /usr/share/Aeolus. |
| 218 |
* Install this README into /usr/share/doc/packages/Aeolus. |
| 219 |
* Create the file /etc/aeolus.conf containing: |
| 220 |
|
| 221 |
# Aeolus default options |
| 222 |
-u -A -S /usr/share/Aeolus/stops-0.3.0 |
| 223 |
|
| 224 |
This will use the default instrument 'Aeolus', and save the |
| 225 |
presets in .aeolus-presets in the users's home directory. |
| 226 |
|
| 227 |
|
| 228 |
4. A quick tour of the GUI |
| 229 |
-------------------------- |
| 230 |
|
| 231 |
4.1 The main window |
| 232 |
|
| 233 |
TBC |
| 234 |
|
| 235 |
4.2 The instrument window |
| 236 |
|
| 237 |
TBC |
| 238 |
|
| 239 |
4.3 The audio window |
| 240 |
|
| 241 |
TBC |
| 242 |
|
| 243 |
4.4 The midi window |
| 244 |
|
| 245 |
TBC |
| 246 |
|
| 247 |
|
| 248 |
5. Editing the synthesis parameters |
| 249 |
----------------------------------- |
| 250 |
|
| 251 |
TBC |
| 252 |
|
| 253 |
|
| 254 |
6. Midi control of stop buttons |
| 255 |
------------------------------- |
| 256 |
|
| 257 |
The protocol uses one controller number. The default is #98, but you |
| 258 |
can change this in global.h. The message is accepted only on channels |
| 259 |
enabled for control in the midi matrix. |
| 260 |
|
| 261 |
The value is interpreted as follows: |
| 262 |
|
| 263 |
v = 01mm0ggg |
| 264 |
|
| 265 |
This type of messages (bit 6 set) selects a group, and either |
| 266 |
resets all stops in that group or sets the mode for the second |
| 267 |
form below. |
| 268 |
|
| 269 |
mm = mode. This can be: |
| 270 |
|
| 271 |
00 disabled, also resets all elements in the group. |
| 272 |
01 set off |
| 273 |
10 set on |
| 274 |
11 toggle |
| 275 |
|
| 276 |
ggg = group, one of the button groups as defined in the instrument |
| 277 |
definition. In the GUI groups start at the top, the first one (for |
| 278 |
division III) being group #0. |
| 279 |
|
| 280 |
The values of mm and ggg are stored and need not be repeated unless |
| 281 |
they change. |
| 282 |
|
| 283 |
v = 000bbbbb |
| 284 |
|
| 285 |
According to the current state of mode, this command switches a |
| 286 |
stop on or off, or toggles its state, or does nothing at all. |
| 287 |
|
| 288 |
bbbbb = button index within the group. |
| 289 |
|
| 290 |
Buttons are numbered left to right, top to bottom within each |
| 291 |
group. The first one is #0. |
| 292 |
|
| 293 |
|
| 294 |
EOF |
| 295 |
|