| 1 |
Version 1.8.33: |
| 2 |
- No significant changes. |
| 3 |
|
| 4 |
Version 1.8.32: |
| 5 |
- No significant changes. |
| 6 |
|
| 7 |
Version 1.8.31: |
| 8 |
- No significant changes. |
| 9 |
|
| 10 |
Version 1.8.30: |
| 11 |
- No significant changes. |
| 12 |
|
| 13 |
Version 1.8.29: |
| 14 |
- Added a new configuration command 'set_to_header' with the default setting |
| 15 |
'off'. If activated, this replaces To, Cc, Bcc with a new To header. |
| 16 |
The setting 'undisclosed_recipients' replaces the separate command of the same |
| 17 |
name (but the old command remains supported for compatibility). |
| 18 |
- Added a new substitution pattern '%F' for the 'from' command. This allows |
| 19 |
to set the envelope-from address to the content of the From header. |
| 20 |
- Many improvements in the msmtpq script. |
| 21 |
|
| 22 |
Version 1.8.28: |
| 23 |
- Detect SMTPUTF8 server capability and use it if available. |
| 24 |
- Add IDN support to --configure (build with libidn2 to enable this). |
| 25 |
- Add special value 'none' to logfile_time_format to suppress time output. |
| 26 |
|
| 27 |
Version 1.8.27: |
| 28 |
- Add a testing infrastructure ('make check') |
| 29 |
- Many improvements in the msmtpq script |
| 30 |
- Many improvements to the vim scripts |
| 31 |
|
| 32 |
Version 1.8.26: |
| 33 |
- Add support for SCRAM-SHA-256-PLUS and SCRAM-SHA-1-PLUS authentication, and |
| 34 |
prefer SCRAM methods over the PLAIN method because of their superior |
| 35 |
properties. |
| 36 |
- With --read-envelope-from, a Resent-From header is now used if it is present |
| 37 |
and appears before any From header |
| 38 |
|
| 39 |
Version 1.8.25: |
| 40 |
- No significant changes, just bug fixes. |
| 41 |
|
| 42 |
Version 1.8.24: |
| 43 |
- Added a new configuration command 'from_full_name' to set a full name for the |
| 44 |
From header (like -F on the command line) |
| 45 |
- Fixed the allow_from_override command |
| 46 |
|
| 47 |
Version 1.8.23: |
| 48 |
- The msmtpq script was updated. |
| 49 |
|
| 50 |
Version 1.8.22: |
| 51 |
- The msmtpq script was updated. |
| 52 |
|
| 53 |
Version 1.8.21: |
| 54 |
- Added a new configuration command 'eval' to replace the current configuration |
| 55 |
file line with the output of a command (similar to passwordeval, but more |
| 56 |
general). |
| 57 |
- Added a new configuration command 'set_msgid_header' with the default setting |
| 58 |
'auto'. This adds a Message-ID header to the mail if none is present. |
| 59 |
- msmtpd now adds a Received header |
| 60 |
|
| 61 |
Version 1.8.20: |
| 62 |
- Added a new configuration command 'allow_from_override'. When off, the --from |
| 63 |
option does not override the envelope-from address anymore. |
| 64 |
|
| 65 |
Version 1.8.19: |
| 66 |
- Fixed a security problem in msmtpd: mail addresses starting with '-' could be |
| 67 |
interpreted as options of the pipe command. |
| 68 |
|
| 69 |
Version 1.8.18: |
| 70 |
- No significant changes. |
| 71 |
|
| 72 |
Version 1.8.17: |
| 73 |
- msmtpd now supports logging to syslog or to a file with the option --log, |
| 74 |
and authentication (for special use cases) with the option --auth. |
| 75 |
|
| 76 |
Version 1.8.16: |
| 77 |
- The 'from' command now accepts patterns (as in shell file name matching) |
| 78 |
so that many envelope from addresses given with --from can match the |
| 79 |
same account |
| 80 |
- Added support for %H, %C, %M in the domain command |
| 81 |
- msmtpd now supports sysexits.h error codes from the pipe command |
| 82 |
|
| 83 |
Version 1.8.15: |
| 84 |
- Added support for SCRAM-SHA-256 authentication via GNU SASL |
| 85 |
|
| 86 |
Version 1.8.14: |
| 87 |
- Added support for libtls as an alternative to GnuTLS |
| 88 |
|
| 89 |
Version 1.8.13: |
| 90 |
- Added support for XOAUTH2, the predecessor of OAUTHBEARER. |
| 91 |
- The passwordeval command can now handle very long input, which can be |
| 92 |
necessary for OAUTHBEARER and XOAUTH2. |
| 93 |
- GnuTLS >= 3.4 is required |
| 94 |
|
| 95 |
Version 1.8.12: |
| 96 |
- msmtpd now supports session reuse and improves standards compliance |
| 97 |
- Automatic account matching now supports subaddresses. For example, |
| 98 |
[email protected] will match account [email protected]. |
| 99 |
|
| 100 |
Version 1.8.11: |
| 101 |
- Add a new undisclosed_recipients command and --undisclosed-recipients option |
| 102 |
to replace To, Cc, Bcc with a single "To: undisclosed-recipients:;" header. |
| 103 |
- Improved handling of temporary files on Windows systems. |
| 104 |
- Re-enabled support for systems lacking vasprintf(), such as IBM i PASE. |
| 105 |
|
| 106 |
Version 1.8.10: |
| 107 |
- The msmtpq script was fixed (the fix in 1.8.9 was incomplete) |
| 108 |
|
| 109 |
Version 1.8.9: |
| 110 |
- The msmtpq script was fixed (it was accidently broken in 1.8.8) |
| 111 |
|
| 112 |
Version 1.8.8: |
| 113 |
- Added a new socket command and --socket option to connect via local sockets. |
| 114 |
- Added a new tls_host_override command and --tls-host-override option to |
| 115 |
override the host name used for TLS verification. |
| 116 |
- Added a new set_from_header command and --set-from-header option with three |
| 117 |
settings: |
| 118 |
- on: always set a From header, possibly replacing an existing one |
| 119 |
- off: never set a From header |
| 120 |
- auto: add a From header if there is none (this is the default). |
| 121 |
This replaces the add_missing_from_header option (which remains supported). |
| 122 |
- Added a new set_date_header command and --set-date-header option with two |
| 123 |
settings: |
| 124 |
- off: never set a Date header |
| 125 |
- auto: add a Date header if there is none (this is the default). |
| 126 |
This replaces the add_missing_date_header option (which remains supported). |
| 127 |
- Fixed the handling of empty From headers with --read-recipients/-t. |
| 128 |
- Fixed the source_ip command for proxies. |
| 129 |
|
| 130 |
Version 1.8.7: |
| 131 |
- The from command now supports the patterns %U, %H, %C, %M that are replaced |
| 132 |
with user name, host name, canonicalized host name, and the contents of |
| 133 |
/etc/mailname. This replaces the old auto_from and maildomain commands (which |
| 134 |
remain supported). |
| 135 |
|
| 136 |
Version 1.8.6: |
| 137 |
- Aliases are now expanded recursively |
| 138 |
- Minor bug fixes |
| 139 |
|
| 140 |
Version 1.8.5: |
| 141 |
- Fixed OAUTHBEARER. |
| 142 |
- Support for TLS client certificates via PKCS11 devices, e.g. smart cards. |
| 143 |
- Various small bug fixes and improvements. |
| 144 |
|
| 145 |
Version 1.8.4: |
| 146 |
- Added support for the OAUTHBEARER authentication method. |
| 147 |
- Several minor bug fixes. |
| 148 |
|
| 149 |
Version 1.8.3: |
| 150 |
- This version fixes a security problem that affects version 1.8.2 (older |
| 151 |
versions are not affected): when the new default value system for |
| 152 |
tls_trust_file is used, the result of certificate verification was not |
| 153 |
properly checked. |
| 154 |
|
| 155 |
Version 1.8.2: |
| 156 |
- To simplify TLS setup, the tls_trust_file command has a new default value |
| 157 |
'system' that selects the system default trust. Now you just need tls=on to |
| 158 |
use TLS; the other TLS options are only required in special cases. |
| 159 |
To make this work without breaking compatibility with older msmtp versions, |
| 160 |
tls_fingerprint now overrides tls_trust_file, and tls_certcheck=off overrides |
| 161 |
both (previously, you could not specify contradicting options). |
| 162 |
- To simplify setup, a new option '--configure <mailaddress>' was added that |
| 163 |
automatically generates a configuration file for a given mail address. |
| 164 |
However, this only works if the mail domain publishes appropriate SRV records. |
| 165 |
|
| 166 |
Version 1.8.1: |
| 167 |
- Fixed our TLS code to support TLS 1.3 with GnuTLS. |
| 168 |
|
| 169 |
Version 1.8.0: |
| 170 |
- A minimal SMTP server called msmtpd was added that listens on the local host |
| 171 |
and pipes mails to msmtp (or another program). It is intended to be used with |
| 172 |
system services that cannot be configured to call msmtp directly. You can |
| 173 |
disable it with the configure option --without-msmtpd. |
| 174 |
- Using OpenSSL is discouraged and may not be supported in the future. Please |
| 175 |
use GnuTLS instead. The reasons are explained here: |
| 176 |
https://marlam.de/msmtp/news/openssl-discouraged/ |
| 177 |
- As using GNU SASL is most likely unnecessary, it is disabled by default now. |
| 178 |
Since everything uses TLS nowadays and thus can use PLAIN authentication, you |
| 179 |
really only need it for GSSAPI. |
| 180 |
- If your system requires a library for IDN support, libidn2 is now used instead |
| 181 |
of the older libidn. |
| 182 |
- The CRAM-MD5 authentication method is marked as obsolete / insecure and will |
| 183 |
not be chosen automatically anymore. |
| 184 |
- The passwordeval command does not require the password to be terminated by a |
| 185 |
new line character anymore. |
| 186 |
- The new logfile_time_format command allows to customize log file time stamps. |
| 187 |
- Builtin default port numbers are now used instead of consulting /etc/services. |
| 188 |
- Support for DJGPP and for systems lacking vasprintf(), mkstemp(), or tmpfile() |
| 189 |
is removed. |
| 190 |
|
| 191 |
Version 1.6.8: |
| 192 |
- Add --source-ip option and source_ip command to bind the outgoing connection |
| 193 |
to a specific source IP address. |
| 194 |
- Enable SNI for TLS |
| 195 |
|
| 196 |
Version 1.6.7: |
| 197 |
- Add support for ~/.config/msmtp/config as configuration file |
| 198 |
- Add network timeout handling on Windows |
| 199 |
- Fix command line handling of SHA256 TLS fingerprints |
| 200 |
- Fix SIGPIPE handling (affects at least Mac OS X) |
| 201 |
- Add french translation, and update german translation |
| 202 |
|
| 203 |
Version 1.6.6: |
| 204 |
- Fix a memory leak and a double-free in msmtp_read_headers(), triggered by read |
| 205 |
errors. |
| 206 |
|
| 207 |
Version 1.6.5: |
| 208 |
- Support SHA256 fingerprints for tls_fingerprint, and mark both SHA1 and MD5 as |
| 209 |
deprecated. |
| 210 |
|
| 211 |
Version 1.6.4: |
| 212 |
- The system default policy is used with GnuTLS instead of a hardcoded one. |
| 213 |
|
| 214 |
Version 1.6.3: |
| 215 |
- A bug in SOCKS support was fixed. |
| 216 |
- Handling non-fatal errors in TLS handshakes was fixed. |
| 217 |
|
| 218 |
Version 1.6.2: |
| 219 |
- A bug was fixed that prevented consecutive Bcc headers from being removed |
| 220 |
properly. |
| 221 |
|
| 222 |
Version 1.6.1: |
| 223 |
- The new configure option --with-tls replaces --with-ssl. |
| 224 |
- A new configure option --disable-gai-idn was added. |
| 225 |
|
| 226 |
Version 1.6.0: |
| 227 |
- Support for SOCKS proxies was added. This allows msmtp to be used with Tor. |
| 228 |
- GNOME Keyring support now uses libsecret instead of libgnome-keyring. It is |
| 229 |
now documented how to use secret-tool to manage passwords for msmtp; the |
| 230 |
obsolete msmtp-gnome-tool script is removed. |
| 231 |
- Configuration file security is now only checked if the file actually contains |
| 232 |
secrets such as passwords. (If you still store passwords in the configuration |
| 233 |
file, consider using the passwordeval command or a key ring instead.) |
| 234 |
- The GSSAPI authentication method is not chosen automatically anymore, you have |
| 235 |
to request it manually if you really want to use it. |
| 236 |
- From: and Date: headers are now added to mails if necessary, for compatibility |
| 237 |
with sendmail, postfix, exim, and other MTAs. This can be disabled with the |
| 238 |
add_missing_from_header and add_missing_date_header commands. |
| 239 |
- Libidn is not required for IDN support anymore on systems where getaddrinfo() |
| 240 |
supports the AI_IDN flag and the GnuTLS version is >= 3.4.0. |
| 241 |
- The new remove_bcc_headers command replaces the old keepbcc command (but the |
| 242 |
old command is still supported for compatibility). |
| 243 |
- SSLv3 is disabled, and the obsolete tls_force_sslv3 command and |
| 244 |
--tls-force-sslv3 option have no effect anymore. |
| 245 |
|
| 246 |
Version 1.4.32: |
| 247 |
- A recipient list on the command line is now parsed as if it appeared in a |
| 248 |
mail header. |
| 249 |
|
| 250 |
Version 1.4.31: |
| 251 |
- No significant changes. |
| 252 |
|
| 253 |
Version 1.4.30: |
| 254 |
- No significant changes. |
| 255 |
|
| 256 |
Version 1.4.29: |
| 257 |
- The obsolete service name "ssmtp" was replaced with "smtps". |
| 258 |
|
| 259 |
Version 1.4.28: |
| 260 |
- No significant changes. |
| 261 |
|
| 262 |
Version 1.4.27: |
| 263 |
- No significant changes. |
| 264 |
|
| 265 |
Version 1.4.26: |
| 266 |
- A new version of the msmtpq script fixes serious bugs. To update to the new |
| 267 |
version of the script, you need to remove the old msmtpQ symlink, change |
| 268 |
msmtpQ to msmtpq in your MUA config, and use msmtp-queue for queue management. |
| 269 |
|
| 270 |
Version 1.4.25: |
| 271 |
- DIGEST-MD5 authentication is not considered secure any longer. See RFC 6331. |
| 272 |
- Support for alias expansion was added. See the aliases command and --aliases |
| 273 |
option. |
| 274 |
|
| 275 |
Version 1.4.24: |
| 276 |
- The build system was updated, and as a consequence some options to the |
| 277 |
configure script have changed. See './configure --help'. |
| 278 |
- The license of the manual was changed from the GNU FDL to a very simple |
| 279 |
permissive license. |
| 280 |
- The unmaintained pt_BR translation was removed. |
| 281 |
|
| 282 |
Version 1.4.23: |
| 283 |
- No significant changes. |
| 284 |
|
| 285 |
Version 1.4.22: |
| 286 |
- A new command 'passwordeval' with a corresponding '--passwordeval' option |
| 287 |
allows to set the password to the output of a command. |
| 288 |
|
| 289 |
Version 1.4.21: |
| 290 |
- No significant changes. |
| 291 |
|
| 292 |
Version 1.4.20: |
| 293 |
- Added support for authentication mechanism SCRAM-SHA-1 via GNU SASL. |
| 294 |
- The new command tls_fingerprint allows one to trust one particular TLS |
| 295 |
certificate, in case tls_trust_file cannot be used for some reason. |
| 296 |
- The new script msmtp-gnome-tool.py manages Gnome Keyring passwords for msmtp. |
| 297 |
|
| 298 |
Version 1.4.19: |
| 299 |
- When using OpenSSL, msmtp now correctly handles NUL characters in the Common |
| 300 |
Name and Subject Alternative Name fields of certificates. This fixes a |
| 301 |
security problem. Note that msmtp is not affected by this problem if GnuTLS is |
| 302 |
used. |
| 303 |
|
| 304 |
Version 1.4.18: |
| 305 |
- No significant changes. |
| 306 |
|
| 307 |
Version 1.4.17: |
| 308 |
- Msmtp now also reads SYSCONFDIR/netrc if the password was not found in |
| 309 |
~/.netrc. |
| 310 |
- Support for the GNOME keyring was added by Satoru SATOH. |
| 311 |
|
| 312 |
Version 1.4.16: |
| 313 |
- No significant changes. |
| 314 |
|
| 315 |
Version 1.4.15: |
| 316 |
- The configuration command tls_crl_file was added. This allows to use |
| 317 |
certificate revocation lists (CRLs) during certificate verification. |
| 318 |
- The configuration command tls_min_dh_prime_bits was added. This may be needed |
| 319 |
to use TLS/SSL with servers that use a small Diffie-Hellman (DH) prime size. |
| 320 |
- The configuration command tls_priorities was added. This allows to fine tune |
| 321 |
TLS/SSL session parameters. |
| 322 |
|
| 323 |
Version 1.4.14: |
| 324 |
- The -t option now properly supports Resent-* headers. |
| 325 |
- The --read-envelope-from option was added. It allows to read the envelope from |
| 326 |
address from the From header. |
| 327 |
- The environment variables SMTPSERVER and EMAIL can be used to configure msmtp |
| 328 |
for simple use cases. |
| 329 |
- Support for the Mac OS X keychain was added by Jay Soffian. |
| 330 |
|
| 331 |
Version 1.4.13: |
| 332 |
- Useful scripts are now distributed in the scripts subdirectory. |
| 333 |
- The license was updated to GPLv3 or later (source code) and GFDLv1.2 or later |
| 334 |
(documentation). |
| 335 |
|
| 336 |
Version 1.4.12: |
| 337 |
- No significant changes. |
| 338 |
|
| 339 |
Version 1.4.11: |
| 340 |
- Security improvements: |
| 341 |
- TLS requires tls_trust_file or a disabled tls_certcheck now, so that it is |
| 342 |
not silently vulnerable to man-in-the-middle attacks. |
| 343 |
- NTLM authentication is considered insecure because it is undocumented. It is |
| 344 |
therefore not used automatically without TLS anymore. |
| 345 |
|
| 346 |
Version 1.4.10: |
| 347 |
- No significant changes. |
| 348 |
|
| 349 |
Version 1.4.9: |
| 350 |
- No significant changes. |
| 351 |
|
| 352 |
Version 1.4.8: |
| 353 |
- No significant changes. |
| 354 |
|
| 355 |
Version 1.4.7: |
| 356 |
- The configuration command tls_force_sslv3 was added. This is needed to use |
| 357 |
TLS/SSL with some old and broken servers. |
| 358 |
|
| 359 |
Version 1.4.6: |
| 360 |
- The options to the configure script have changed! See the first few |
| 361 |
paragraphs of INSTALL for details. |
| 362 |
- Optional support for Internationalized Domain Names (IDN) was added. |
| 363 |
GNU Libidn is required for this. |
| 364 |
|
| 365 |
Version 1.4.5: |
| 366 |
- Only minor tweaks. |
| 367 |
|
| 368 |
Version 1.4.4: |
| 369 |
- Support for the sendmail -F option (accepted but ignored). |
| 370 |
- Removed the OpenSSL exception note from the license information. |
| 371 |
|
| 372 |
Version 1.4.3: |
| 373 |
- Automatic envelope-from addresses are only generated when auto_from is enabled |
| 374 |
with the new auto_from command or --auto-from option. |
| 375 |
This allow empty envelope from addresses to be set with the from command or |
| 376 |
--from option. |
| 377 |
|
| 378 |
Version 1.4.2: |
| 379 |
- The 'connect_timeout' setting was replaced by a 'timeout' setting that applies |
| 380 |
to all network operations. The old option and command are still accepted, but |
| 381 |
they are not restricted to connection attempts anymore. |
| 382 |
- Native language support (NLS) was added. Currently the only supported language |
| 383 |
besides english is german, but it is easy to add more translations (hint, |
| 384 |
hint)! |
| 385 |
|
| 386 |
Version 1.4.1: |
| 387 |
- Only bug fixes, no new features. |
| 388 |
|
| 389 |
Version 1.4.0: |
| 390 |
- This is the new stable release of msmtp. |
| 391 |
BEWARE: When upgrading from 1.2.4, note that |
| 392 |
- Authentication is not enabled automatically anymore! Insert the command |
| 393 |
"auth on" into account definitions that need it. |
| 394 |
- Some command line options have changed! |
| 395 |
- Summary of new features since 1.2.4: |
| 396 |
- Sendmail compatible command line options, including -t, -N, and -R |
| 397 |
- New long options to configure almost everything on the command line |
| 398 |
- Optional account selection with -f/--from |
| 399 |
- Support for a system wide configuration file |
| 400 |
- Optional automatic construction of envelope from addresses |
| 401 |
- More flexible account definitions |
| 402 |
- Configurable connection timeouts |
| 403 |
- Improved log file logging |
| 404 |
- Syslog logging |
| 405 |
- Improved TLS/SSL support |
| 406 |
- Support for LMTP |
| 407 |
- Support for the EXTERNAL and GSSAPI authentication methods |
| 408 |
- Support for .netrc and password prompting |
| 409 |
- Rewritten documentation, available in various formats |
| 410 |
- New since 1.3.9: |
| 411 |
- No new features, but minor improvements mainly regarding interoperability |
| 412 |
and performance. And some minor bug fixes. |
| 413 |
|
| 414 |
Version 1.3.9: |
| 415 |
- Added support for the .netrc file: If a password is needed but none is given, |
| 416 |
msmtp will try to find it in ~/.netrc, and if that fails, msmtp will prompt |
| 417 |
you for it. |
| 418 |
- The authentication user name is included in the log if authentication is used. |
| 419 |
Suggested by Jim Fohlin. |
| 420 |
- An account from the system configuration file cannot be partially changed in |
| 421 |
the user configuration file anymore; it must be replaced completely instead. |
| 422 |
- Added LMTP support. |
| 423 |
|
| 424 |
Version 1.3.8: |
| 425 |
- The default values from a defaults section in a system configuration file |
| 426 |
are not valid in the user configuration file anymore, to prevent changes in |
| 427 |
the system configuration file from breaking user setups. |
| 428 |
|
| 429 |
Version 1.3.7: |
| 430 |
- The user configuration file is required to have no more permissions than |
| 431 |
0600 (user read/write). |
| 432 |
- Added specialisation to account definitions. See documentation of the |
| 433 |
account command and the example files. |
| 434 |
- Added the new connect_timeout command and --connect-timeout option. |
| 435 |
- The password will be prompted for if none is given in the configuration file. |
| 436 |
|
| 437 |
Version 1.3.6: |
| 438 |
- New documentation! |
| 439 |
It was rewritten using texinfo, which allows easy generation of html and pdf |
| 440 |
documents. |
| 441 |
The man page is still up to date and will not be dropped. |
| 442 |
- A new configuration file command ("defaults") to set default values for all |
| 443 |
following accounts was added. Suggested by Jim Fohlin. |
| 444 |
- Support for EXTERNAL authentication was added. |
| 445 |
- You need GnuTLS >= 1.2.0 now if you want GnuTLS support. |
| 446 |
- bug fixes! |
| 447 |
|
| 448 |
Version 1.3.5: |
| 449 |
- A system wide configuration file SYSCONFDIR/msmtprc will be used if it exists. |
| 450 |
It's settings will be overridden by the the user configuration file. |
| 451 |
Use the --sysconfdir configure option to set SYSCONFDIR to something other |
| 452 |
than /usr/local/etc. |
| 453 |
- If no envelope from address is given, msmtp will construct one using the user |
| 454 |
name and the mail domain (if given). |
| 455 |
- New command/options pairs: |
| 456 |
- maildomain/--maildomain to set the domain part of constructed envelope from |
| 457 |
addresses |
| 458 |
- syslog/--syslog to enable logging to syslog |
| 459 |
|
| 460 |
Version 1.3.4: |
| 461 |
- Just some cleanups and bugfixes. The built-in CRAM-MD5 code works again. |
| 462 |
|
| 463 |
Version 1.3.3: |
| 464 |
- support for Remote Message Queue Starting (RMQS) was added, see option --rmqs |
| 465 |
- msmtp can now print information about the peer's TLS certificate. |
| 466 |
Use --serverinfo (or --debug) to see it |
| 467 |
- If you want GnuTLS as your TLS library, you need a version >= 1.1.23 now |
| 468 |
|
| 469 |
Version 1.3.2: |
| 470 |
- You need gsasl or libgsasl >= 0.2.4 if you want GNU SASL support |
| 471 |
- Various bugfixes |
| 472 |
|
| 473 |
Version 1.3.1: |
| 474 |
- fixed the -t option |
| 475 |
|
| 476 |
Version 1.3.0: |
| 477 |
- INCOMPATIBLE CHANGES: |
| 478 |
- configuration file: |
| 479 |
- The auth command is now *required* to activate authentication. Just |
| 480 |
setting user name and password is not enough anymore |
| 481 |
- The tls_nostarttls command should be changed to "tls_starttls off", |
| 482 |
though the old command is still supported |
| 483 |
- The tls_nocertcheck command should be changed to "tls_certcheck off", |
| 484 |
though the old command is still supported |
| 485 |
- command line: |
| 486 |
- Changed short options (because of collision with sendmail options): |
| 487 |
-p is now -P |
| 488 |
-F is now -C |
| 489 |
-v is not available anymore, use --version |
| 490 |
-h is not available anymore, use --help |
| 491 |
- If you used -f/--from without -a/--account to override the envelope from |
| 492 |
address of the default account, you have to use --account=default |
| 493 |
explicitly now, because otherwise msmtp tries to find an account matching |
| 494 |
the from address |
| 495 |
- NEW FEATURES: |
| 496 |
- Sendmail compatible interface |
| 497 |
- Almost all options can now be set on the command line |
| 498 |
- Support for the sendmail -t option (read additional recipient addresses |
| 499 |
from the To, Cc, and Bcc headers of the mail) |
| 500 |
- You can choose the account using the -f/--from option: |
| 501 |
If you use -f/--from but not -a/--account, the first account of the |
| 502 |
configuration file that has a matching envelope from address will be used |
| 503 |
- GSSAPI authentication (you need GNU SASL >= 0.2.3 with GSSAPI support) |
| 504 |
- New command ntlmdomain to set the domain parameter for NTLM authentication |
| 505 |
- CHANGES: |
| 506 |
- Long option support on all platforms (thanks to gnulib) |
| 507 |
- Enhanced almost all commands to allow unsetting of features |
| 508 |
- Changed log file information: Instead of conffile/account, log |
| 509 |
information about host, tls, auth, and from. |
| 510 |
|
| 511 |
Version 1.2.4: |
| 512 |
- No new features. |
| 513 |
|
| 514 |
Version 1.2.3: |
| 515 |
- IPv6 support on Windows systems |
| 516 |
- The configuration file supports all commands and arguments related to |
| 517 |
TLS and authentication, even if TLS and/or GNU SASL support is not |
| 518 |
compiled in |
| 519 |
- The GNU SASL library is not required to support DIGEST-MD5 and NTLM |
| 520 |
anymore. This means you can now use the packaged versions of the library |
| 521 |
from Gentoo or Debian sarge. |
| 522 |
- You can use the -v/--version option to find out which authentication |
| 523 |
methods are supported. |
| 524 |
|
| 525 |
Version 1.2.2: |
| 526 |
- Enhancements to the logfile command: |
| 527 |
- All available information is now written to the logfile (new fields: |
| 528 |
mailsize=..., smtpmsg='...', errormsg='...'). |
| 529 |
- Logging to standard output is possible by using "logfile -" |
| 530 |
|
| 531 |
Version 1.2.1: |
| 532 |
- No new features. |
| 533 |
|
| 534 |
Version 1.2.0: |
| 535 |
- This version can be compiled without TLS/SSL support; use |
| 536 |
--disable-ssl if you really want that. |
| 537 |
- Read the entries for versions 1.1.x for more changes since the last |
| 538 |
stable version 1.0.0. |
| 539 |
|
| 540 |
Version 1.1.3: |
| 541 |
- New option -i for compatibility with mail(1). |
| 542 |
- New 'logfile' command; see man page for details. |
| 543 |
|
| 544 |
Version 1.1.2: |
| 545 |
- No user visible changes. |
| 546 |
|
| 547 |
Version 1.1.1: |
| 548 |
- The tls_nostarttls command now sets the default port to 465 (ssmtp). |
| 549 |
|
| 550 |
Version 1.1.0: |
| 551 |
- Support for SMTP command pipelining. On high latency networks, this |
| 552 |
may increase transmission speed, especially when sending to many |
| 553 |
recipients. |
| 554 |
- The short option for --file, -f, has changed to -F |
| 555 |
- A new option --from/-f is available to set the envelope from address. |
| 556 |
- A new option --serverinfo/-S is available to print information |
| 557 |
about the capabilities and limitations of an SMTP server |
| 558 |
|
| 559 |
Version 1.0.0: |
| 560 |
- New feature: tilde expansion for filenames in the configuration file |
| 561 |
|
| 562 |
Version 0.7.2: |
| 563 |
- This version adds native support for Windows 9x/ME/NT/2000/XP/2003 |
| 564 |
(with MinGW) and DOS (with DJGPP and the Watt32 library). |
| 565 |
|
| 566 |
Version 0.7.1: |
| 567 |
- New command: 'domain' |
| 568 |
- New options: --pretend and --debug |
| 569 |
|
| 570 |
Version 0.7.0: |
| 571 |
- Support for DSN (Delivery Status Notifications) was added via |
| 572 |
the new commands 'dsn_notify' and 'dsn_return'. |
| 573 |
- The 'tls_nocertcheck' command was added. It disables all server |
| 574 |
certificate checks. Use it if you get certificate check errors but |
| 575 |
still want to use the SMTP server with TLS/SSL. |
| 576 |
- The 'nostarttls' command is now called 'tls_nostarttls'. |
| 577 |
Please update your configuration file. |
| 578 |
|
| 579 |
Version 0.6.5: |
| 580 |
- License clarification: |
| 581 |
msmtp is released under the GPL with the additional exemption that |
| 582 |
compiling, linking, and/or using OpenSSL is allowed. |
| 583 |
- If you want to use GnuTLS instead of OpenSSL, you will now need |
| 584 |
GnuTLS >= 1.0.0 and libgcrypt >= 1.1.90! |
| 585 |
- msmtp now works on systems that lack IPv6 support |
| 586 |
- msmtp now accepts arbitrary long lines in mails |
| 587 |
|
| 588 |
Version 0.6.4: |
| 589 |
- fixed configuration file code |
| 590 |
|
| 591 |
Version 0.6.3: |
| 592 |
- portability fix for Mac OS X (Randolph Fritz) |
| 593 |
- fixed --disable-gsasl configure option |
| 594 |
- man page improvements |
| 595 |
|
| 596 |
Version 0.6.2: |
| 597 |
- use GNU Autotools (Christophe Nowicki) |
| 598 |
- fixed wildcard support in server certificate's Common Name field |
| 599 |
|
| 600 |
Version 0.6.1: |
| 601 |
- improved certificate check/verification with OpenSSL |
| 602 |
- code cleanups |
| 603 |
|
| 604 |
Version 0.6.0: |
| 605 |
- Added sanity checks of server certificate when using TLS |
| 606 |
- Strict server certificate verification with tls_trust_file command |
| 607 |
- Possibility to send client certificate if requested (tls_key_file and |
| 608 |
tls_cert_file commands) |
| 609 |
- Optional support for GnuTLS instead of OpenSSL |
| 610 |
- Optional support for GSASL (adds DIGEST-MD5 and NTLM authentication methods) |
| 611 |
- Arguments in the configuration file may now contain blanks |
| 612 |
- Removed the possibility to choose the TLS version with the tls command |
| 613 |
- Proper recognition of server capabilities (EHLO response) |