Debian Codegraph @

contrib/ovmrtg/cfgmakerov

raw
1 #!/usr/local/bin/perl5
2 # -*- mode: Perl -*-
3 ##################################################################
4 # Config file creator
5 ##################################################################
6 # Created by Laurie Gellatly <[email protected]>
7 # based on mrtg cfgmaker by Tobias Oetiker <[email protected]>
8 # this produces a config file for one router, by pulling info
9 # off the router via snmp and then writing files ready for
10 # snmpCollect to use (via xnmcollect) and later ovlg calls
11 #################################################################
12 #
13 # Distributed under the GNU copyleft
14 #
15 # $Id: cfgmakerov,v 1.1.1.1 2002/02/26 10:16:36 oetiker Exp $
16 #
17 use SNMP_Session "0.58";
18 use BER "0.57";
19 use Socket;
20 use strict;
21 use vars '$DEBUG';
22 my $DEBUG = 0;
23 my $webdir = "/var/opt/ns-fasttrack/docs/mrtg/";
24
25 %snmpget::OIDS = ( 'sysDescr' => '1.3.6.1.2.1.1.1.0',
26 'sysContact' => '1.3.6.1.2.1.1.4.0',
27 'sysName' => '1.3.6.1.2.1.1.5.0',
28 'sysLocation' => '1.3.6.1.2.1.1.6.0',
29 'sysUptime' => '1.3.6.1.2.1.1.3.0',
30 'ifNumber' => '1.3.6.1.2.1.2.1.0',
31 ###################################
32 # add the ifNumber ....
33 'ifDescr' => '1.3.6.1.2.1.2.2.1.2',
34 'ifType' => '1.3.6.1.2.1.2.2.1.3',
35 'ifIndex' => '1.3.6.1.2.1.2.2.1.1',
36 'ifSpeed' => '1.3.6.1.2.1.2.2.1.5',
37 'ifOperStatus' => '1.3.6.1.2.1.2.2.1.8',
38 'ifAdminStatus' => '1.3.6.1.2.1.2.2.1.7',
39 # up 1, down 2, testing 3
40 'ipAdEntAddr' => '1.3.6.1.2.1.4.20.1.1',
41 'ipAdEntIfIndex' => '1.3.6.1.2.1.4.20.1.2',
42 'sysObjectID' => '1.3.6.1.2.1.1.2.0',
43 'CiscolocIfDescr' => '1.3.6.1.4.1.9.2.2.1.1.28',
44 'ifAlias' => '1.3.6.1.2.1.31.1.1.1.18',
45 'ifName' => '1.3.6.1.2.1.31.1.1.1.1'
46 );
47
48
49
50
51 sub main {
52
53
54 my(%ifType_d)=('1'=>'Other',
55 '2'=>'regular1822',
56 '3'=>'hdh1822',
57 '4'=>'ddnX25',
58 '5'=>'rfc877x25',
59 '6'=>'ethernetCsmacd',
60 '7'=>'iso88023Csmacd',
61 '8'=>'iso88024TokenBus',
62 '9'=>'iso88025TokenRing',
63 '10'=>'iso88026Man',
64 '11'=>'starLan',
65 '12'=>'proteon10Mbit',
66 '13'=>'proteon80Mbit',
67 '14'=>'hyperchannel',
68 '15'=>'fddi',
69 '16'=>'lapb',
70 '17'=>'sdlc',
71 '18'=>'ds1',
72 '19'=>'e1',
73 '20'=>'basicISDN',
74 '21'=>'primaryISDN',
75 '22'=>'propPointToPointSerial',
76 '23'=>'ppp',
77 '24'=>'softwareLoopback',
78 '25'=>'eon',
79 '26'=>'ethernet-3Mbit',
80 '27'=>'nsip',
81 '28'=>'slip',
82 '29'=>'ultra',
83 '30'=>'ds3',
84 '31'=>'sip',
85 '32'=>'frame-relay',
86 '33'=>'rs232',
87 '34'=>'para',
88 '35'=>'arcnet',
89 '36'=>'arcnetPlus',
90 '37'=>'atm',
91 '38'=>'miox25',
92 '39'=>'sonet',
93 '40'=>'x25ple',
94 '41'=>'iso88022llc',
95 '42'=>'localTalk',
96 '43'=>'smdsDxi',
97 '44'=>'frameRelayService',
98 '45'=>'v35',
99 '46'=>'hssi',
100 '47'=>'hippi',
101 '48'=>'modem',
102 '49'=>'aal5',
103 '50'=>'sonetPath',
104 '51'=>'sonetVT',
105 '52'=>'smdsIcip',
106 '53'=>'propVirtual',
107 '54'=>'propMultiplexor',
108 '55'=>'100BaseVG'
109 );
110
111 my($vendor)=0;
112
113 my($router) = $ARGV[0];
114 die <<USAGE unless $router;
115
116 USAGE: cfgmakerov 'router'
117
118
119 EXAMPLE: cfgmakerov ezwf7.ethz.ch >>mrtg.cfg
120
121
122 USAGE
123
124
125
126 my($sysDescr,$sysContact,$sysName,$sysLocation,$ifNumber,$sysObjectID) =
127 snmpget($router,
128 'sysDescr','sysContact','sysName', 'sysLocation', 'ifNumber', 'sysObjectID');
129
130 ### The next three lines can be deleted once Someone gives this box a name
131 if ($router eq '10.26.254.1') {
132 $sysName = 'nrgiga';
133 }
134 if ($sysName eq "") {
135 $sysName = $router;
136 }
137 my($sysNameL) = $sysName;
138 $sysNameL =~ tr/[A-Z]/[a-z]/;
139
140 $sysDescr =~ s/\r/<BR>/g; # Change returns to <BR>
141 my($ciscobox) = ($sysObjectID =~ /cisco/);
142 my($portmaster) = ($sysObjectID =~ /livingston/);
143 $vendor = ($ciscobox || $portmaster) ;
144 my($ifInErrors) = '1.3.6.1.2.1.2.2.1.14';
145 my($ifOutErrors) = '1.3.6.1.2.1.2.2.1.20';
146
147 ### Create the directory if it does not exist
148
149 mkdir("$webdir$sysNameL",0777);
150
151 print <<ECHO;
152
153 WorkDir: $webdir$sysNameL
154 IconDir: ../
155 ######################################################################
156 # Description: $sysDescr
157 # Contact: $sysContact
158 # System Name: $sysName
159 # Location: $sysLocation
160 #.....................................................................
161 ECHO
162 if ( $ciscobox ) {
163 print <<ECHO;
164 # Router CPU load %
165 Target[$sysNameL.cpu]: `perl ovcvtfile $router 0 2`
166 MaxBytes[$sysNameL.cpu]: 100
167 Title[$sysNameL.cpu]: CPU LOAD
168 PageTop[$sysNameL.cpu]: <H1>CPU Load %</H1>
169 ShortLegend[$sysNameL.cpu]: %
170 XSize[$sysNameL.cpu]: 380
171 YSize[$sysNameL.cpu]: 100
172 YLegend[$sysNameL.cpu]: CPU Utilization
173 Legend1[$sysNameL.cpu]: CPU Utilization in % (Load)
174 Legend2[$sysNameL.cpu]: CPU Utilization in % (Load)
175 Legend3[$sysNameL.cpu]:
176 Legend4[$sysNameL.cpu]:
177 LegendI[$sysNameL.cpu]:
178 LegendO[$sysNameL.cpu]: &nbsp;Usage:
179 Options[$sysNameL.cpu]: growright, gauge
180 #---------------------------------------------------------------
181 ECHO
182 }
183
184 my @ipadent = snmpgettable($router, 'ipAdEntAddr');
185 print STDERR "Got Addresses\n" if $DEBUG;
186 my @ipadentif = snmpgettable($router, 'ipAdEntIfIndex');
187 print STDERR "Got IfTable\n" if $DEBUG;
188
189 my(%ipaddr, %iphost,$index);
190 while (scalar @ipadentif){
191 $index = shift @ipadentif;
192 $ipaddr{$index} = shift @ipadent;
193 $iphost{$index} =
194 gethostbyaddr(pack('C4',split(/\./,$ipaddr{$index})), AF_INET);
195 if ($iphost{$index} eq ''){
196 $iphost{$index} = $ipaddr{$index};
197 }
198
199 }
200
201 my(@ifdescr) = snmpgettable($router, 'ifDescr');
202 print STDERR "Got IfDescr\n" if $DEBUG;
203 my(@iftype) = snmpgettable($router, 'ifType');
204 print STDERR "Got IfType\n" if $DEBUG;
205 my(@ifspeed) = snmpgettable($router, 'ifSpeed');
206 print STDERR "Got IfSpeed\n" if $DEBUG;
207 my(@ifadminstatus) = snmpgettable($router, 'ifAdminStatus');
208 print STDERR "Got IfStatus\n" if $DEBUG;
209 my(@ifoperstatus) = snmpgettable($router, 'ifOperStatus');
210 print STDERR "Got IfOperStatus\n" if $DEBUG;
211 my(@ifindex) = snmpgettable($router, 'ifIndex');
212 print STDERR "Got IfIndex\n" if $DEBUG;
213 my(@ifname) = snmpgettable($router, 'ifName');
214 print STDERR "Got IfName\n" if $DEBUG;
215
216 my(%sifdesc,%siftype,%sifspeed,%sifadminstatus,%sifoperstatus,%sciscodescr,%sifname);
217
218 ### May need the cisco IOS version number so we know which oid to use
219 ### to get the cisco description.
220 ###
221 ### - mjd 2/5/98 (Mike Diehn) ([email protected])
222 ###
223 my ($cisco_ver, $cisco_descr_oid, @ciscodescr);
224 if ( $ciscobox ) {
225 ($cisco_ver) = ($sysDescr =~ /Version\s+([\d.]+)/);
226 $cisco_descr_oid = ($cisco_ver ge "11.3") ? "ifAlias" : "CiscolocIfDescr";
227 }
228
229 while (scalar @ifindex) {
230
231 # as these arrays get filled from the bottom,
232 # we need to empty them from the botom as well ...
233 # fifo
234
235 $index = shift @ifindex;
236 $sifdesc{$index} = shift @ifdescr;
237 $sifname{$index} = shift @ifname;
238 $siftype{$index} = shift @iftype;
239 $sifspeed{$index} = shift @ifspeed;
240 $sifadminstatus{$index} = shift @ifadminstatus;
241 $sifoperstatus{$index} = shift @ifoperstatus;
242
243 if ($portmaster) {
244 # Trying to extract extra info livingston
245 # We can only approximate speeds
246 #
247 # so we think that ppp can do 76800 bit/s, and slip 38400.
248 # (actualy, slip is a bit faster, but usualy users with newer modems
249 # use ppp). Alternatively, you can set async speed to 115200 or
250 # 230400 (the maximum speed supported by portmaster).
251 #
252 # But if the interface is ptpW (sync), max speed is 128000
253 # change it to your needs. On various Portmasters there are
254 # various numbers of sync interfaces, so modify it.
255 #
256 # The most commonly used PM-2ER has only one sync.
257 #
258 # Paul Makeev ([email protected])
259 #
260
261 if ($siftype{$index} eq 'ppp') {
262 if ($sifdesc{$index} eq 'ptpW1') {
263 $sifspeed{$index} = 128000;
264 } else {
265 $sifspeed{$index} = 76800;
266 }
267 } elsif ($siftype{$index} eq 'slip') {
268 $sifspeed{$index} = 38400;
269 } elsif ($siftype{$index} eq 'ethernetCsmacd') {
270 $sifspeed{$index} = 10000000;
271 }
272 }
273
274 ### Move this section south so we know what type of
275 ### circuit we're looking at before we retrieve
276 ### the cisco interface alias.
277 ###
278 ### This whole cicso thing should be re-written, but since
279 ### this script doesn't need to run quickly...
280 ###
281 ### - mjd 2/5/98
282 ###
283 # Get the user configurable interface description entered in the config
284 # if it's a cisco-box
285 #
286 if ($ciscobox) {
287
288 my ($enoid, @descr);
289
290 $enoid = $snmpget::OIDS{"$cisco_descr_oid"} . "." . $index;
291
292 if ( $cisco_ver ge "11.2" or $siftype{$index} ne 'frame-relay' ) {
293
294 ### This is either not a frame-relay sub-interface or
295 ### this router is running IOS 11.2+ and interface
296 ### type won't matter. In either of these cases, it's
297 ### ok to try getting the ifAlias or ciscoLocIfDesc.
298 ###
299 @descr = snmpget($router, $enoid);
300
301 } else {
302
303 ### This is a frame-relay sub-interface *and* the router
304 ### is running an IOS older than 11.2. Therefore, we can
305 ### get neither ifAlias nor ciscoLocIfDesc. Do something
306 ### useful.
307 ###
308 @descr = ("Cisco PVCs descriptions require IOS 11.2+.");
309
310 } # end if else
311
312 ### Put whatever I got into the array we'll use later to append the result
313 ### of this operation onto the results from the ifDescr fetch.
314 ###
315 push @ciscodescr, shift @descr;
316
317 } # end if ($ciscobox)
318
319 # especially since cisco does not return a if
320 # descr for each interface it has ...
321 ## JB 2/8/97 - sometimes IOS inserts E1 controllers in the standard-MIB
322 ## interface table, but not in the local interface table. This puts the
323 ## local interface description table out-of-sync. the following
324 ## modification skips over E1 cards as interfaces.
325 #
326 ### I suspect that the mod I made above, to use the ifAlias
327 ### oid if possible, may cause problems here. If it seems
328 ### that your descriptions are out of sync, try commenting
329 ### out the "if ( condition )" and it's closing right brace
330 ### so that the "shift @ciscodescr" get executed for *all*
331 ### iterations of this loop.
332 ###
333 ### - mjd 2/5/95
334 ###
335 if ($ciscobox && $siftype{$index} ne 'ds1') {
336 $sciscodescr{$index} = "<BR>" . (shift @ciscodescr) if @ciscodescr;
337 }
338 }
339
340 foreach $index ( sort { $a <=> $b } keys %sifdesc) {
341 my $c;
342 my $speed = int($sifspeed{$index} / 8); # bits to byte
343 # LJG Change to report in Bits
344 # my $speed_str=&fmi($speed);
345 my $speed_str=&fmi($sifspeed{$index});
346 my $name="$sysNameL.$index";
347 my $namerr="$sysNameL.$index.err";
348
349 if (($sifadminstatus{$index} ne "up")
350 # this check added by Josh - don't query E1-stack controllers
351 || ($siftype{$index} eq 'ds1')
352 || ($siftype{$index} eq 'softwareLoopback')
353 || ($speed == 0 )
354 # LJG Change to report all in Bits
355 # || ($speed > 400 * 10**6) #speeds of 400 MByte/s are not realistic
356 || ($speed > 3200 * 10**6) #speeds of 400 MByte/s are not realistic
357 || ($sifoperstatus{$index} eq 'down')
358 || (($sifdesc{$index}=~ /Dialer/) && ($ciscobox))) {
359 print <<ECHO;
360 ########
361 ######## This Interface is one of the following
362 ######## - administratively not UP
363 ######## - it is in test mode
364 ######## - it is a softwareLoopback interface
365 ######## - has a unrealistic speed setting
366 ######## It is commented out for this reason.
367 ########
368 ECHO
369 $c="# ";
370 }else {
371 $c = '';
372 }
373
374 print <<ECHO;
375 ${c}
376 ${c}Target[$name]: `perl ovcvtfile $router $index 1`
377 ${c}MaxBytes[$name]: $speed
378 ${c}Title[$name]: $sysName ($iphost{$index}): $sifdesc{$index} $sifname{$index}
379 ${c}Options[$name]: growright, gauge, bits
380 ${c}PageTop[$name]: <H1>Traffic Analysis for $sifdesc{$index}
381 ${c} $sciscodescr{$index}</H1>
382 ${c} <TABLE>
383 ${c} <TR><TD>System:</TD><TD>$sysName in $sysLocation</TD></TR>
384 ${c} <TR><TD>Maintainer:</TD><TD>$sysContact</TD></TR>
385 ${c} <TR><TD>Interface:</TD><TD>$sifdesc{$index} ($index - $sifname{$index})</TD></TR>
386 ${c} <TR><TD>IP:</TD><TD>$iphost{$index} ($ipaddr{$index})</TD></TR>
387 ${c} <TR><TD>Max Speed:</TD>
388 ${c} <TD>$speed_str ($siftype{$index})</TD></TR>
389 ${c} </TABLE>
390 ${c}
391 #---------------------------------------------------------------
392
393 # In and Out Error Counts
394 ${c}
395 ${c}Target[$namerr]: `perl ovcvtfile $router $index 0`
396 ${c}MaxBytes[$namerr]: 2147483600
397 ${c}Title[$namerr]: $sysName ($iphost{$index}): $sifdesc{$index} $sifname{$index} I/O Errors
398 ${c}Options[$namerr]: growright, gauge
399 ${c}PageTop[$namerr]: <H1>I/O Error Analysis for $sifdesc{$index}
400 ${c} $sciscodescr{$index}</H1>
401 ${c}YLegend[$namerr]: Errors/Period
402 ${c}Legend1[$namerr]: Inward Errors
403 ${c}Legend2[$namerr]: Outward Errors
404 ${c}Legend3[$namerr]:
405 ${c}Legend4[$namerr]:
406 ${c}LegendI[$namerr]: &nbsp;In :
407 ${c}LegendO[$namerr]: &nbsp;Out :
408 ${c}
409 #---------------------------------------------------------------
410
411 ECHO
412 }
413 }
414
415 main;
416 exit(0);
417
418 sub snmpget{
419 my($host,@vars) = @_;
420 my(@enoid, $var,$response, $bindings, $binding, $value, $inoid,$outoid,
421 $upoid,$oid,@retvals,$t1,$t2,@resp,$tempo);
422 my($hackcisco);
423 foreach $var (@vars) {
424 die "Unknown SNMP var $var\n"
425 unless $snmpget::OIDS{$var} || $var =~ /^\d+[\.\d+]*\.\d+$/;
426 if ($var =~ /^\d+[\.\d+]*\.\d+/) {
427 $value = $value.$var." ";
428 $hackcisco = 1;
429 } else {
430 $value = $value.$snmpget::OIDS{$var}." ";
431 $hackcisco = 0;
432 }
433 }
434 open(SNMPG, "snmpget $host $value |");
435 # print STDERR $value;
436 while ($tempo =<SNMPG>){
437 # print STDERR $tempo;
438 ($t1, $t2, $tempo ) = split /:/ , $tempo, 3;
439 if (!$tempo){
440 if ($t2){
441 $t1 = $t1 .":".$t2;
442 }
443 $tempo = pop(@retvals)." ".$t1 ;
444 }
445 $tempo=~s/\t/ /g;
446 $tempo=~s/\n/ /g;
447 $tempo=~s/^\s+//;
448 $tempo=~s/\s+$//;
449 push @retvals, $tempo;
450 }
451 # print STDERR @retvals;
452 close (SNMPG);
453 return (@retvals);
454 }
455
456 sub snmpgettable{
457 my($host,$var) = @_;
458 my($next_oid,$enoid,$orig_oid,
459 $response, $bindings, $binding, $t1, $t2,$outoid,
460 $upoid,$oid,@table,$tempo);
461 die "Unknown SNMP var $var\n"
462 unless $snmpget::OIDS{$var};
463
464 $orig_oid = $snmpget::OIDS{$var}." ";
465 $enoid=$orig_oid;
466 open(SNMPG, "snmpwalk $host $orig_oid |");
467 # print STDERR $orig_oid;
468 while ($tempo =<SNMPG>){
469 # print STDERR $tempo;
470 ($t1, $t2, $tempo ) = split /:/ , $tempo ,3;
471 if (!$tempo){
472 if ($t2){
473 $t1 = $t1 .":".$t2;
474 }
475 $tempo = pop(@table)." ".$t1 ;
476 }
477 $tempo=~s/\t/ /g;
478 $tempo=~s/\n/ /g;
479 $tempo=~s/^\s+//;
480 $tempo=~s/\s+$//;
481 push @table, $tempo;
482
483 }
484 close (SNMPG);
485 return (@table);
486 }
487
488 sub fmi {
489 my($number) = $_[0];
490 my(@short);
491 # LJG Change to report in Bits
492 # @short = ("Bytes/s","kBytes/s","MBytes/s","GBytes/s");
493 @short = ("Bits/s","kBits/s","MBits/s","GBits/s");
494 my $digits=length("".$number);
495 my $divm=0;
496 while ($digits-$divm*3 > 3) { $divm++; }
497 my $divnum = $number/10**($divm*3);
498 return sprintf("%1.1f %s",$divnum,$short[$divm]);
499 }
500
501