| 1 |
################################################################# |
| 2 |
Multi Dynamic IP Traffic Grapher contibution to mrtg |
| 3 |
################################################################# |
| 4 |
|
| 5 |
Created by John Heenan <[email protected]> |
| 6 |
|
| 7 |
Available from the mrtg-dynip web page at |
| 8 |
http://www.heenan.ironbark.id.au/mrtg-dynip |
| 9 |
|
| 10 |
################################################################# |
| 11 |
|
| 12 |
Distributed under the GPL copyleft of GNU |
| 13 |
|
| 14 |
mrtg-dynip, v 0.41b 1997/10/25 |
| 15 |
|
| 16 |
Copyright John Heenan, with exception of datestr subroutine |
| 17 |
(copied from mrtg executable) and much of internal_walk |
| 18 |
subroutine (manner of using snmp modules copied from an example |
| 19 |
by Simon Lenine) |
| 20 |
|
| 21 |
################################################################## |
| 22 |
|
| 23 |
Mrtg-dynip is a contribution to MRTG, enabling MRTG to generate multi |
| 24 |
interface traffic graphs for IP interfaces on hosts that do not provide |
| 25 |
consistent SNMP target numbers for their interfaces. Such IP interfaces |
| 26 |
include IP active serial interfaces attached to modems in a PPP dial in |
| 27 |
environment. The hosts must run snmp agents. For completeness, information |
| 28 |
about interface devices with unvarying SNMP target numbers, such as |
| 29 |
ethernet cards, can be configured to be included. |
| 30 |
|
| 31 |
Mrtg-dynip can be considred to have sophisticated modem bank monitoring |
| 32 |
capacity, when the modems carry PPP or SLIP traffic. |
| 33 |
|
| 34 |
Regenerates a named 'mrtg.cfg' file to ensure snmp data remains with a |
| 35 |
consistent IP number, or overridable IP number of a real physical device |
| 36 |
in a dial in IP environment, rather than with an interface name which |
| 37 |
can get assinged to different real physical devices, and runs mrtg on |
| 38 |
the generated file. |
| 39 |
|
| 40 |
Generates a web index file of stats web pages. |
| 41 |
|
| 42 |
Mrtg-dynip's configuration is simplest where static (or fixed) IP is not |
| 43 |
used for dial into a rotary modem pool. |
| 44 |
|
| 45 |
Please see the FAQ for more information. |
| 46 |
|
| 47 |
The names of the files packaged into mrtg-dynip-0.41b.tar.gz are |
| 48 |
|
| 49 |
README This file |
| 50 |
Install Install details |
| 51 |
FAQ 'Frequently Asked Questions' |
| 52 |
mrtg-dynip A full configuartion commented executable |
| 53 |
mrtg-dynip-sydnet The complete mrtg-dynip file in use at www.stats.syd.net.au |
| 54 |
Changes Change history |
| 55 |
TODO What the future might hold |
| 56 |
|
| 57 |
The package is oriented towards UNIX systems, there is no reason mrtg-dynip |
| 58 |
should nor run under Windows NT, some comments are made relevant to this. |
| 59 |
Please note the first task under Windows NT is to ensure the UNIX new lines |
| 60 |
are converted to DOS new lines or are readable. |
| 61 |
|
| 62 |
If you use this please let me know. If you would also like your site to be |
| 63 |
linked from the mrtg-dynip web page, please let me know. |
| 64 |
|
| 65 |
John Heenan |
| 66 |
[email protected] |
| 67 |
www.heenan.ironbark.id.au/mrtg-dynip |