| 1 |
use super::*; |
| 2 |
use crate::codec::UserError; |
| 3 |
use crate::frame::{PushPromiseHeaderError, Reason, DEFAULT_INITIAL_WINDOW_SIZE}; |
| 4 |
use crate::proto; |
| 5 |
|
| 6 |
use http::{HeaderMap, Request, Response}; |
| 7 |
|
| 8 |
use std::cmp::Ordering; |
| 9 |
use std::io; |
| 10 |
use std::task::{Context, Poll, Waker}; |
| 11 |
use std::time::Instant; |
| 12 |
|
| 13 |
#[derive(Debug)] |
| 14 |
pub(super) struct Recv { |
| 15 |
/// Initial window size of remote initiated streams |
| 16 |
init_window_sz: WindowSize, |
| 17 |
|
| 18 |
/// Connection level flow control governing received data |
| 19 |
flow: FlowControl, |
| 20 |
|
| 21 |
/// Amount of connection window capacity currently used by outstanding streams. |
| 22 |
in_flight_data: WindowSize, |
| 23 |
|
| 24 |
/// The lowest stream ID that is still idle |
| 25 |
next_stream_id: Result<StreamId, StreamIdOverflow>, |
| 26 |
|
| 27 |
/// The stream ID of the last processed stream |
| 28 |
last_processed_id: StreamId, |
| 29 |
|
| 30 |
/// Any streams with a higher ID are ignored. |
| 31 |
/// |
| 32 |
/// This starts as MAX, but is lowered when a GOAWAY is received. |
| 33 |
/// |
| 34 |
/// > After sending a GOAWAY frame, the sender can discard frames for |
| 35 |
/// > streams initiated by the receiver with identifiers higher than |
| 36 |
/// > the identified last stream. |
| 37 |
max_stream_id: StreamId, |
| 38 |
|
| 39 |
/// Streams that have pending window updates |
| 40 |
pending_window_updates: store::Queue<stream::NextWindowUpdate>, |
| 41 |
|
| 42 |
/// New streams to be accepted |
| 43 |
pending_accept: store::Queue<stream::NextAccept>, |
| 44 |
|
| 45 |
/// Locally reset streams that should be reaped when they expire |
| 46 |
pending_reset_expired: store::Queue<stream::NextResetExpire>, |
| 47 |
|
| 48 |
/// How long locally reset streams should ignore received frames |
| 49 |
reset_duration: Duration, |
| 50 |
|
| 51 |
/// Holds frames that are waiting to be read |
| 52 |
buffer: Buffer<Event>, |
| 53 |
|
| 54 |
/// Refused StreamId, this represents a frame that must be sent out. |
| 55 |
refused: Option<StreamId>, |
| 56 |
|
| 57 |
/// If push promises are allowed to be received. |
| 58 |
is_push_enabled: bool, |
| 59 |
|
| 60 |
/// If extended connect protocol is enabled. |
| 61 |
is_extended_connect_protocol_enabled: bool, |
| 62 |
} |
| 63 |
|
| 64 |
#[derive(Debug)] |
| 65 |
pub(super) enum Event { |
| 66 |
Headers(peer::PollMessage), |
| 67 |
Data(Bytes), |
| 68 |
Trailers(HeaderMap), |
| 69 |
} |
| 70 |
|
| 71 |
#[derive(Debug)] |
| 72 |
pub(super) enum RecvHeaderBlockError<T> { |
| 73 |
Oversize(T), |
| 74 |
State(Error), |
| 75 |
} |
| 76 |
|
| 77 |
#[derive(Debug)] |
| 78 |
pub(crate) enum Open { |
| 79 |
PushPromise, |
| 80 |
Headers, |
| 81 |
} |
| 82 |
|
| 83 |
impl Recv { |
| 84 |
pub fn new(peer: peer::Dyn, config: &Config) -> Self { |
| 85 |
let next_stream_id = if peer.is_server() { 1 } else { 2 }; |
| 86 |
|
| 87 |
let mut flow = FlowControl::new(); |
| 88 |
|
| 89 |
// connections always have the default window size, regardless of |
| 90 |
// settings |
| 91 |
flow.inc_window(DEFAULT_INITIAL_WINDOW_SIZE) |
| 92 |
.expect("invalid initial remote window size"); |
| 93 |
flow.assign_capacity(DEFAULT_INITIAL_WINDOW_SIZE).unwrap(); |
| 94 |
|
| 95 |
Recv { |
| 96 |
init_window_sz: config.local_init_window_sz, |
| 97 |
flow, |
| 98 |
in_flight_data: 0 as WindowSize, |
| 99 |
next_stream_id: Ok(next_stream_id.into()), |
| 100 |
pending_window_updates: store::Queue::new(), |
| 101 |
last_processed_id: StreamId::ZERO, |
| 102 |
max_stream_id: StreamId::MAX, |
| 103 |
pending_accept: store::Queue::new(), |
| 104 |
pending_reset_expired: store::Queue::new(), |
| 105 |
reset_duration: config.local_reset_duration, |
| 106 |
buffer: Buffer::new(), |
| 107 |
refused: None, |
| 108 |
is_push_enabled: config.local_push_enabled, |
| 109 |
is_extended_connect_protocol_enabled: config.extended_connect_protocol_enabled, |
| 110 |
} |
| 111 |
} |
| 112 |
|
| 113 |
/// Returns the initial receive window size |
| 114 |
pub fn init_window_sz(&self) -> WindowSize { |
| 115 |
self.init_window_sz |
| 116 |
} |
| 117 |
|
| 118 |
/// Returns the ID of the last processed stream |
| 119 |
pub fn last_processed_id(&self) -> StreamId { |
| 120 |
self.last_processed_id |
| 121 |
} |
| 122 |
|
| 123 |
/// Update state reflecting a new, remotely opened stream |
| 124 |
/// |
| 125 |
/// Returns the stream state if successful. `None` if refused |
| 126 |
pub fn open( |
| 127 |
&mut self, |
| 128 |
id: StreamId, |
| 129 |
mode: Open, |
| 130 |
counts: &mut Counts, |
| 131 |
) -> Result<Option<StreamId>, Error> { |
| 132 |
assert!(self.refused.is_none()); |
| 133 |
|
| 134 |
counts.peer().ensure_can_open(id, mode)?; |
| 135 |
|
| 136 |
let next_id = self.next_stream_id()?; |
| 137 |
if id < next_id { |
| 138 |
proto_err!(conn: "id ({:?}) < next_id ({:?})", id, next_id); |
| 139 |
return Err(Error::library_go_away(Reason::PROTOCOL_ERROR)); |
| 140 |
} |
| 141 |
|
| 142 |
self.next_stream_id = id.next_id(); |
| 143 |
|
| 144 |
if !counts.can_inc_num_recv_streams() { |
| 145 |
self.refused = Some(id); |
| 146 |
return Ok(None); |
| 147 |
} |
| 148 |
|
| 149 |
Ok(Some(id)) |
| 150 |
} |
| 151 |
|
| 152 |
/// Transition the stream state based on receiving headers |
| 153 |
/// |
| 154 |
/// The caller ensures that the frame represents headers and not trailers. |
| 155 |
pub fn recv_headers( |
| 156 |
&mut self, |
| 157 |
frame: frame::Headers, |
| 158 |
stream: &mut store::Ptr, |
| 159 |
counts: &mut Counts, |
| 160 |
) -> Result<(), RecvHeaderBlockError<Option<frame::Headers>>> { |
| 161 |
tracing::trace!("opening stream; init_window={}", self.init_window_sz); |
| 162 |
let is_initial = stream.state.recv_open(&frame)?; |
| 163 |
|
| 164 |
if is_initial { |
| 165 |
// TODO: be smarter about this logic |
| 166 |
if frame.stream_id() > self.last_processed_id { |
| 167 |
self.last_processed_id = frame.stream_id(); |
| 168 |
} |
| 169 |
|
| 170 |
// Increment the number of concurrent streams |
| 171 |
counts.inc_num_recv_streams(stream); |
| 172 |
} |
| 173 |
|
| 174 |
if !stream.content_length.is_head() { |
| 175 |
use super::stream::ContentLength; |
| 176 |
use http::header; |
| 177 |
|
| 178 |
if let Some(content_length) = frame.fields().get(header::CONTENT_LENGTH) { |
| 179 |
let content_length = match frame::parse_u64(content_length.as_bytes()) { |
| 180 |
Ok(v) => v, |
| 181 |
Err(_) => { |
| 182 |
proto_err!(stream: "could not parse content-length; stream={:?}", stream.id); |
| 183 |
return Err(Error::library_reset(stream.id, Reason::PROTOCOL_ERROR).into()); |
| 184 |
} |
| 185 |
}; |
| 186 |
|
| 187 |
stream.content_length = ContentLength::Remaining(content_length); |
| 188 |
} |
| 189 |
} |
| 190 |
|
| 191 |
if frame.is_over_size() { |
| 192 |
// A frame is over size if the decoded header block was bigger than |
| 193 |
// SETTINGS_MAX_HEADER_LIST_SIZE. |
| 194 |
// |
| 195 |
// > A server that receives a larger header block than it is willing |
| 196 |
// > to handle can send an HTTP 431 (Request Header Fields Too |
| 197 |
// > Large) status code [RFC6585]. A client can discard responses |
| 198 |
// > that it cannot process. |
| 199 |
// |
| 200 |
// So, if peer is a server, we'll send a 431. In either case, |
| 201 |
// an error is recorded, which will send a REFUSED_STREAM, |
| 202 |
// since we don't want any of the data frames either. |
| 203 |
tracing::debug!( |
| 204 |
"stream error REQUEST_HEADER_FIELDS_TOO_LARGE -- \ |
| 205 |
recv_headers: frame is over size; stream={:?}", |
| 206 |
stream.id |
| 207 |
); |
| 208 |
return if counts.peer().is_server() && is_initial { |
| 209 |
let mut res = frame::Headers::new( |
| 210 |
stream.id, |
| 211 |
frame::Pseudo::response(::http::StatusCode::REQUEST_HEADER_FIELDS_TOO_LARGE), |
| 212 |
HeaderMap::new(), |
| 213 |
); |
| 214 |
res.set_end_stream(); |
| 215 |
Err(RecvHeaderBlockError::Oversize(Some(res))) |
| 216 |
} else { |
| 217 |
Err(RecvHeaderBlockError::Oversize(None)) |
| 218 |
}; |
| 219 |
} |
| 220 |
|
| 221 |
let stream_id = frame.stream_id(); |
| 222 |
let (pseudo, fields) = frame.into_parts(); |
| 223 |
|
| 224 |
if pseudo.protocol.is_some() |
| 225 |
&& counts.peer().is_server() |
| 226 |
&& !self.is_extended_connect_protocol_enabled |
| 227 |
{ |
| 228 |
proto_err!(stream: "cannot use :protocol if extended connect protocol is disabled; stream={:?}", stream.id); |
| 229 |
return Err(Error::library_reset(stream.id, Reason::PROTOCOL_ERROR).into()); |
| 230 |
} |
| 231 |
|
| 232 |
if pseudo.status.is_some() && counts.peer().is_server() { |
| 233 |
proto_err!(stream: "cannot use :status header for requests; stream={:?}", stream.id); |
| 234 |
return Err(Error::library_reset(stream.id, Reason::PROTOCOL_ERROR).into()); |
| 235 |
} |
| 236 |
|
| 237 |
if !pseudo.is_informational() { |
| 238 |
let message = counts |
| 239 |
.peer() |
| 240 |
.convert_poll_message(pseudo, fields, stream_id)?; |
| 241 |
|
| 242 |
// Push the frame onto the stream's recv buffer |
| 243 |
stream |
| 244 |
.pending_recv |
| 245 |
.push_back(&mut self.buffer, Event::Headers(message)); |
| 246 |
stream.notify_recv(); |
| 247 |
|
| 248 |
// Only servers can receive a headers frame that initiates the stream. |
| 249 |
// This is verified in `Streams` before calling this function. |
| 250 |
if counts.peer().is_server() { |
| 251 |
// Correctness: never push a stream to `pending_accept` without having the |
| 252 |
// corresponding headers frame pushed to `stream.pending_recv`. |
| 253 |
self.pending_accept.push(stream); |
| 254 |
} |
| 255 |
} |
| 256 |
|
| 257 |
Ok(()) |
| 258 |
} |
| 259 |
|
| 260 |
/// Called by the server to get the request |
| 261 |
/// |
| 262 |
/// # Panics |
| 263 |
/// |
| 264 |
/// Panics if `stream.pending_recv` has no `Event::Headers` queued. |
| 265 |
/// |
| 266 |
pub fn take_request(&mut self, stream: &mut store::Ptr) -> Request<()> { |
| 267 |
use super::peer::PollMessage::*; |
| 268 |
|
| 269 |
match stream.pending_recv.pop_front(&mut self.buffer) { |
| 270 |
Some(Event::Headers(Server(request))) => request, |
| 271 |
_ => unreachable!("server stream queue must start with Headers"), |
| 272 |
} |
| 273 |
} |
| 274 |
|
| 275 |
/// Called by the client to get pushed response |
| 276 |
pub fn poll_pushed( |
| 277 |
&mut self, |
| 278 |
cx: &Context, |
| 279 |
stream: &mut store::Ptr, |
| 280 |
) -> Poll<Option<Result<(Request<()>, store::Key), proto::Error>>> { |
| 281 |
use super::peer::PollMessage::*; |
| 282 |
|
| 283 |
let mut ppp = stream.pending_push_promises.take(); |
| 284 |
let pushed = ppp.pop(stream.store_mut()).map(|mut pushed| { |
| 285 |
match pushed.pending_recv.pop_front(&mut self.buffer) { |
| 286 |
Some(Event::Headers(Server(headers))) => (headers, pushed.key()), |
| 287 |
// When frames are pushed into the queue, it is verified that |
| 288 |
// the first frame is a HEADERS frame. |
| 289 |
_ => panic!("Headers not set on pushed stream"), |
| 290 |
} |
| 291 |
}); |
| 292 |
stream.pending_push_promises = ppp; |
| 293 |
if let Some(p) = pushed { |
| 294 |
Poll::Ready(Some(Ok(p))) |
| 295 |
} else { |
| 296 |
let is_open = stream.state.ensure_recv_open()?; |
| 297 |
|
| 298 |
if is_open { |
| 299 |
stream.recv_task = Some(cx.waker().clone()); |
| 300 |
Poll::Pending |
| 301 |
} else { |
| 302 |
Poll::Ready(None) |
| 303 |
} |
| 304 |
} |
| 305 |
} |
| 306 |
|
| 307 |
/// Called by the client to get the response |
| 308 |
pub fn poll_response( |
| 309 |
&mut self, |
| 310 |
cx: &Context, |
| 311 |
stream: &mut store::Ptr, |
| 312 |
) -> Poll<Result<Response<()>, proto::Error>> { |
| 313 |
use super::peer::PollMessage::*; |
| 314 |
|
| 315 |
// If the buffer is not empty, then the first frame must be a HEADERS |
| 316 |
// frame or the user violated the contract. |
| 317 |
match stream.pending_recv.pop_front(&mut self.buffer) { |
| 318 |
Some(Event::Headers(Client(response))) => Poll::Ready(Ok(response)), |
| 319 |
Some(_) => panic!("poll_response called after response returned"), |
| 320 |
None => { |
| 321 |
if !stream.state.ensure_recv_open()? { |
| 322 |
proto_err!(stream: "poll_response: stream={:?} is not opened;", stream.id); |
| 323 |
return Poll::Ready(Err(Error::library_reset( |
| 324 |
stream.id, |
| 325 |
Reason::PROTOCOL_ERROR, |
| 326 |
))); |
| 327 |
} |
| 328 |
|
| 329 |
stream.recv_task = Some(cx.waker().clone()); |
| 330 |
Poll::Pending |
| 331 |
} |
| 332 |
} |
| 333 |
} |
| 334 |
|
| 335 |
/// Transition the stream based on receiving trailers |
| 336 |
pub fn recv_trailers( |
| 337 |
&mut self, |
| 338 |
frame: frame::Headers, |
| 339 |
stream: &mut store::Ptr, |
| 340 |
) -> Result<(), Error> { |
| 341 |
// Transition the state |
| 342 |
stream.state.recv_close()?; |
| 343 |
|
| 344 |
if stream.ensure_content_length_zero().is_err() { |
| 345 |
proto_err!(stream: "recv_trailers: content-length is not zero; stream={:?};", stream.id); |
| 346 |
return Err(Error::library_reset(stream.id, Reason::PROTOCOL_ERROR)); |
| 347 |
} |
| 348 |
|
| 349 |
let trailers = frame.into_fields(); |
| 350 |
|
| 351 |
// Push the frame onto the stream's recv buffer |
| 352 |
stream |
| 353 |
.pending_recv |
| 354 |
.push_back(&mut self.buffer, Event::Trailers(trailers)); |
| 355 |
stream.notify_recv(); |
| 356 |
|
| 357 |
Ok(()) |
| 358 |
} |
| 359 |
|
| 360 |
/// Releases capacity of the connection |
| 361 |
pub fn release_connection_capacity(&mut self, capacity: WindowSize, task: &mut Option<Waker>) { |
| 362 |
tracing::trace!( |
| 363 |
"release_connection_capacity; size={}, connection in_flight_data={}", |
| 364 |
capacity, |
| 365 |
self.in_flight_data, |
| 366 |
); |
| 367 |
|
| 368 |
// Decrement in-flight data |
| 369 |
self.in_flight_data -= capacity; |
| 370 |
|
| 371 |
// Assign capacity to connection |
| 372 |
// TODO: proper error handling |
| 373 |
let _res = self.flow.assign_capacity(capacity); |
| 374 |
debug_assert!(_res.is_ok()); |
| 375 |
|
| 376 |
if self.flow.unclaimed_capacity().is_some() { |
| 377 |
if let Some(task) = task.take() { |
| 378 |
task.wake(); |
| 379 |
} |
| 380 |
} |
| 381 |
} |
| 382 |
|
| 383 |
/// Releases capacity back to the connection & stream |
| 384 |
pub fn release_capacity( |
| 385 |
&mut self, |
| 386 |
capacity: WindowSize, |
| 387 |
stream: &mut store::Ptr, |
| 388 |
task: &mut Option<Waker>, |
| 389 |
) -> Result<(), UserError> { |
| 390 |
tracing::trace!("release_capacity; size={}", capacity); |
| 391 |
|
| 392 |
if capacity > stream.in_flight_recv_data { |
| 393 |
return Err(UserError::ReleaseCapacityTooBig); |
| 394 |
} |
| 395 |
|
| 396 |
self.release_connection_capacity(capacity, task); |
| 397 |
|
| 398 |
// Decrement in-flight data |
| 399 |
stream.in_flight_recv_data -= capacity; |
| 400 |
|
| 401 |
// Assign capacity to stream |
| 402 |
// TODO: proper error handling |
| 403 |
let _res = stream.recv_flow.assign_capacity(capacity); |
| 404 |
debug_assert!(_res.is_ok()); |
| 405 |
|
| 406 |
if stream.recv_flow.unclaimed_capacity().is_some() { |
| 407 |
// Queue the stream for sending the WINDOW_UPDATE frame. |
| 408 |
self.pending_window_updates.push(stream); |
| 409 |
|
| 410 |
if let Some(task) = task.take() { |
| 411 |
task.wake(); |
| 412 |
} |
| 413 |
} |
| 414 |
|
| 415 |
Ok(()) |
| 416 |
} |
| 417 |
|
| 418 |
/// Release any unclaimed capacity for a closed stream. |
| 419 |
pub fn release_closed_capacity(&mut self, stream: &mut store::Ptr, task: &mut Option<Waker>) { |
| 420 |
debug_assert_eq!(stream.ref_count, 0); |
| 421 |
|
| 422 |
if stream.in_flight_recv_data == 0 { |
| 423 |
return; |
| 424 |
} |
| 425 |
|
| 426 |
tracing::trace!( |
| 427 |
"auto-release closed stream ({:?}) capacity: {:?}", |
| 428 |
stream.id, |
| 429 |
stream.in_flight_recv_data, |
| 430 |
); |
| 431 |
|
| 432 |
self.release_connection_capacity(stream.in_flight_recv_data, task); |
| 433 |
stream.in_flight_recv_data = 0; |
| 434 |
|
| 435 |
self.clear_recv_buffer(stream); |
| 436 |
} |
| 437 |
|
| 438 |
/// Set the "target" connection window size. |
| 439 |
/// |
| 440 |
/// By default, all new connections start with 64kb of window size. As |
| 441 |
/// streams used and release capacity, we will send WINDOW_UPDATEs for the |
| 442 |
/// connection to bring it back up to the initial "target". |
| 443 |
/// |
| 444 |
/// Setting a target means that we will try to tell the peer about |
| 445 |
/// WINDOW_UPDATEs so the peer knows it has about `target` window to use |
| 446 |
/// for the whole connection. |
| 447 |
/// |
| 448 |
/// The `task` is an optional parked task for the `Connection` that might |
| 449 |
/// be blocked on needing more window capacity. |
| 450 |
pub fn set_target_connection_window( |
| 451 |
&mut self, |
| 452 |
target: WindowSize, |
| 453 |
task: &mut Option<Waker>, |
| 454 |
) -> Result<(), Reason> { |
| 455 |
tracing::trace!( |
| 456 |
"set_target_connection_window; target={}; available={}, reserved={}", |
| 457 |
target, |
| 458 |
self.flow.available(), |
| 459 |
self.in_flight_data, |
| 460 |
); |
| 461 |
|
| 462 |
// The current target connection window is our `available` plus any |
| 463 |
// in-flight data reserved by streams. |
| 464 |
// |
| 465 |
// Update the flow controller with the difference between the new |
| 466 |
// target and the current target. |
| 467 |
let current = self |
| 468 |
.flow |
| 469 |
.available() |
| 470 |
.add(self.in_flight_data)? |
| 471 |
.checked_size(); |
| 472 |
if target > current { |
| 473 |
self.flow.assign_capacity(target - current)?; |
| 474 |
} else { |
| 475 |
self.flow.claim_capacity(current - target)?; |
| 476 |
} |
| 477 |
|
| 478 |
// If changing the target capacity means we gained a bunch of capacity, |
| 479 |
// enough that we went over the update threshold, then schedule sending |
| 480 |
// a connection WINDOW_UPDATE. |
| 481 |
if self.flow.unclaimed_capacity().is_some() { |
| 482 |
if let Some(task) = task.take() { |
| 483 |
task.wake(); |
| 484 |
} |
| 485 |
} |
| 486 |
Ok(()) |
| 487 |
} |
| 488 |
|
| 489 |
pub(crate) fn apply_local_settings( |
| 490 |
&mut self, |
| 491 |
settings: &frame::Settings, |
| 492 |
store: &mut Store, |
| 493 |
) -> Result<(), proto::Error> { |
| 494 |
if let Some(val) = settings.is_extended_connect_protocol_enabled() { |
| 495 |
self.is_extended_connect_protocol_enabled = val; |
| 496 |
} |
| 497 |
|
| 498 |
if let Some(target) = settings.initial_window_size() { |
| 499 |
let old_sz = self.init_window_sz; |
| 500 |
self.init_window_sz = target; |
| 501 |
|
| 502 |
tracing::trace!("update_initial_window_size; new={}; old={}", target, old_sz,); |
| 503 |
|
| 504 |
// Per RFC 7540 §6.9.2: |
| 505 |
// |
| 506 |
// In addition to changing the flow-control window for streams that are |
| 507 |
// not yet active, a SETTINGS frame can alter the initial flow-control |
| 508 |
// window size for streams with active flow-control windows (that is, |
| 509 |
// streams in the "open" or "half-closed (remote)" state). When the |
| 510 |
// value of SETTINGS_INITIAL_WINDOW_SIZE changes, a receiver MUST adjust |
| 511 |
// the size of all stream flow-control windows that it maintains by the |
| 512 |
// difference between the new value and the old value. |
| 513 |
// |
| 514 |
// A change to `SETTINGS_INITIAL_WINDOW_SIZE` can cause the available |
| 515 |
// space in a flow-control window to become negative. A sender MUST |
| 516 |
// track the negative flow-control window and MUST NOT send new |
| 517 |
// flow-controlled frames until it receives WINDOW_UPDATE frames that |
| 518 |
// cause the flow-control window to become positive. |
| 519 |
|
| 520 |
match target.cmp(&old_sz) { |
| 521 |
Ordering::Less => { |
| 522 |
// We must decrease the (local) window on every open stream. |
| 523 |
let dec = old_sz - target; |
| 524 |
tracing::trace!("decrementing all windows; dec={}", dec); |
| 525 |
|
| 526 |
store.try_for_each(|mut stream| { |
| 527 |
stream |
| 528 |
.recv_flow |
| 529 |
.dec_recv_window(dec) |
| 530 |
.map_err(proto::Error::library_go_away)?; |
| 531 |
Ok::<_, proto::Error>(()) |
| 532 |
})?; |
| 533 |
} |
| 534 |
Ordering::Greater => { |
| 535 |
// We must increase the (local) window on every open stream. |
| 536 |
let inc = target - old_sz; |
| 537 |
tracing::trace!("incrementing all windows; inc={}", inc); |
| 538 |
store.try_for_each(|mut stream| { |
| 539 |
// XXX: Shouldn't the peer have already noticed our |
| 540 |
// overflow and sent us a GOAWAY? |
| 541 |
stream |
| 542 |
.recv_flow |
| 543 |
.inc_window(inc) |
| 544 |
.map_err(proto::Error::library_go_away)?; |
| 545 |
stream |
| 546 |
.recv_flow |
| 547 |
.assign_capacity(inc) |
| 548 |
.map_err(proto::Error::library_go_away)?; |
| 549 |
Ok::<_, proto::Error>(()) |
| 550 |
})?; |
| 551 |
} |
| 552 |
Ordering::Equal => (), |
| 553 |
} |
| 554 |
} |
| 555 |
|
| 556 |
Ok(()) |
| 557 |
} |
| 558 |
|
| 559 |
pub fn is_end_stream(&self, stream: &store::Ptr) -> bool { |
| 560 |
if !stream.state.is_recv_closed() { |
| 561 |
return false; |
| 562 |
} |
| 563 |
|
| 564 |
stream.pending_recv.is_empty() |
| 565 |
} |
| 566 |
|
| 567 |
pub fn recv_data(&mut self, frame: frame::Data, stream: &mut store::Ptr) -> Result<(), Error> { |
| 568 |
let sz = frame.payload().len(); |
| 569 |
|
| 570 |
// This should have been enforced at the codec::FramedRead layer, so |
| 571 |
// this is just a sanity check. |
| 572 |
assert!(sz <= MAX_WINDOW_SIZE as usize); |
| 573 |
|
| 574 |
let sz = sz as WindowSize; |
| 575 |
|
| 576 |
let is_ignoring_frame = stream.state.is_local_error(); |
| 577 |
|
| 578 |
if !is_ignoring_frame && !stream.state.is_recv_streaming() { |
| 579 |
// TODO: There are cases where this can be a stream error of |
| 580 |
// STREAM_CLOSED instead... |
| 581 |
|
| 582 |
// Receiving a DATA frame when not expecting one is a protocol |
| 583 |
// error. |
| 584 |
proto_err!(conn: "unexpected DATA frame; stream={:?}", stream.id); |
| 585 |
return Err(Error::library_go_away(Reason::PROTOCOL_ERROR)); |
| 586 |
} |
| 587 |
|
| 588 |
tracing::trace!( |
| 589 |
"recv_data; size={}; connection={}; stream={}", |
| 590 |
sz, |
| 591 |
self.flow.window_size(), |
| 592 |
stream.recv_flow.window_size() |
| 593 |
); |
| 594 |
|
| 595 |
if is_ignoring_frame { |
| 596 |
tracing::trace!( |
| 597 |
"recv_data; frame ignored on locally reset {:?} for some time", |
| 598 |
stream.id, |
| 599 |
); |
| 600 |
return self.ignore_data(sz); |
| 601 |
} |
| 602 |
|
| 603 |
// Ensure that there is enough capacity on the connection before acting |
| 604 |
// on the stream. |
| 605 |
self.consume_connection_window(sz)?; |
| 606 |
|
| 607 |
if stream.recv_flow.window_size() < sz { |
| 608 |
// http://httpwg.org/specs/rfc7540.html#WINDOW_UPDATE |
| 609 |
// > A receiver MAY respond with a stream error (Section 5.4.2) or |
| 610 |
// > connection error (Section 5.4.1) of type FLOW_CONTROL_ERROR if |
| 611 |
// > it is unable to accept a frame. |
| 612 |
// |
| 613 |
// So, for violating the **stream** window, we can send either a |
| 614 |
// stream or connection error. We've opted to send a stream |
| 615 |
// error. |
| 616 |
return Err(Error::library_reset(stream.id, Reason::FLOW_CONTROL_ERROR)); |
| 617 |
} |
| 618 |
|
| 619 |
if stream.dec_content_length(frame.payload().len()).is_err() { |
| 620 |
proto_err!(stream: |
| 621 |
"recv_data: content-length overflow; stream={:?}; len={:?}", |
| 622 |
stream.id, |
| 623 |
frame.payload().len(), |
| 624 |
); |
| 625 |
return Err(Error::library_reset(stream.id, Reason::PROTOCOL_ERROR)); |
| 626 |
} |
| 627 |
|
| 628 |
if frame.is_end_stream() { |
| 629 |
if stream.ensure_content_length_zero().is_err() { |
| 630 |
proto_err!(stream: |
| 631 |
"recv_data: content-length underflow; stream={:?}; len={:?}", |
| 632 |
stream.id, |
| 633 |
frame.payload().len(), |
| 634 |
); |
| 635 |
return Err(Error::library_reset(stream.id, Reason::PROTOCOL_ERROR)); |
| 636 |
} |
| 637 |
|
| 638 |
if stream.state.recv_close().is_err() { |
| 639 |
proto_err!(conn: "recv_data: failed to transition to closed state; stream={:?}", stream.id); |
| 640 |
return Err(Error::library_go_away(Reason::PROTOCOL_ERROR)); |
| 641 |
} |
| 642 |
} |
| 643 |
|
| 644 |
// Received a frame, but no one cared about it. fix issue#648 |
| 645 |
if !stream.is_recv { |
| 646 |
tracing::trace!( |
| 647 |
"recv_data; frame ignored on stream release {:?} for some time", |
| 648 |
stream.id, |
| 649 |
); |
| 650 |
self.release_connection_capacity(sz, &mut None); |
| 651 |
return Ok(()); |
| 652 |
} |
| 653 |
|
| 654 |
// Update stream level flow control |
| 655 |
stream |
| 656 |
.recv_flow |
| 657 |
.send_data(sz) |
| 658 |
.map_err(proto::Error::library_go_away)?; |
| 659 |
|
| 660 |
// Track the data as in-flight |
| 661 |
stream.in_flight_recv_data += sz; |
| 662 |
|
| 663 |
let event = Event::Data(frame.into_payload()); |
| 664 |
|
| 665 |
// Push the frame onto the recv buffer |
| 666 |
stream.pending_recv.push_back(&mut self.buffer, event); |
| 667 |
stream.notify_recv(); |
| 668 |
|
| 669 |
Ok(()) |
| 670 |
} |
| 671 |
|
| 672 |
pub fn ignore_data(&mut self, sz: WindowSize) -> Result<(), Error> { |
| 673 |
// Ensure that there is enough capacity on the connection... |
| 674 |
self.consume_connection_window(sz)?; |
| 675 |
|
| 676 |
// Since we are ignoring this frame, |
| 677 |
// we aren't returning the frame to the user. That means they |
| 678 |
// have no way to release the capacity back to the connection. So |
| 679 |
// we have to release it automatically. |
| 680 |
// |
| 681 |
// This call doesn't send a WINDOW_UPDATE immediately, just marks |
| 682 |
// the capacity as available to be reclaimed. When the available |
| 683 |
// capacity meets a threshold, a WINDOW_UPDATE is then sent. |
| 684 |
self.release_connection_capacity(sz, &mut None); |
| 685 |
Ok(()) |
| 686 |
} |
| 687 |
|
| 688 |
pub fn consume_connection_window(&mut self, sz: WindowSize) -> Result<(), Error> { |
| 689 |
if self.flow.window_size() < sz { |
| 690 |
tracing::debug!( |
| 691 |
"connection error FLOW_CONTROL_ERROR -- window_size ({:?}) < sz ({:?});", |
| 692 |
self.flow.window_size(), |
| 693 |
sz, |
| 694 |
); |
| 695 |
return Err(Error::library_go_away(Reason::FLOW_CONTROL_ERROR)); |
| 696 |
} |
| 697 |
|
| 698 |
// Update connection level flow control |
| 699 |
self.flow.send_data(sz).map_err(Error::library_go_away)?; |
| 700 |
|
| 701 |
// Track the data as in-flight |
| 702 |
self.in_flight_data += sz; |
| 703 |
Ok(()) |
| 704 |
} |
| 705 |
|
| 706 |
pub fn recv_push_promise( |
| 707 |
&mut self, |
| 708 |
frame: frame::PushPromise, |
| 709 |
stream: &mut store::Ptr, |
| 710 |
) -> Result<(), Error> { |
| 711 |
stream.state.reserve_remote()?; |
| 712 |
if frame.is_over_size() { |
| 713 |
// A frame is over size if the decoded header block was bigger than |
| 714 |
// SETTINGS_MAX_HEADER_LIST_SIZE. |
| 715 |
// |
| 716 |
// > A server that receives a larger header block than it is willing |
| 717 |
// > to handle can send an HTTP 431 (Request Header Fields Too |
| 718 |
// > Large) status code [RFC6585]. A client can discard responses |
| 719 |
// > that it cannot process. |
| 720 |
// |
| 721 |
// So, if peer is a server, we'll send a 431. In either case, |
| 722 |
// an error is recorded, which will send a REFUSED_STREAM, |
| 723 |
// since we don't want any of the data frames either. |
| 724 |
tracing::debug!( |
| 725 |
"stream error REFUSED_STREAM -- recv_push_promise: \ |
| 726 |
headers frame is over size; promised_id={:?};", |
| 727 |
frame.promised_id(), |
| 728 |
); |
| 729 |
return Err(Error::library_reset( |
| 730 |
frame.promised_id(), |
| 731 |
Reason::REFUSED_STREAM, |
| 732 |
)); |
| 733 |
} |
| 734 |
|
| 735 |
let promised_id = frame.promised_id(); |
| 736 |
let (pseudo, fields) = frame.into_parts(); |
| 737 |
let req = crate::server::Peer::convert_poll_message(pseudo, fields, promised_id)?; |
| 738 |
|
| 739 |
if let Err(e) = frame::PushPromise::validate_request(&req) { |
| 740 |
use PushPromiseHeaderError::*; |
| 741 |
match e { |
| 742 |
NotSafeAndCacheable => proto_err!( |
| 743 |
stream: |
| 744 |
"recv_push_promise: method {} is not safe and cacheable; promised_id={:?}", |
| 745 |
req.method(), |
| 746 |
promised_id, |
| 747 |
), |
| 748 |
InvalidContentLength(e) => proto_err!( |
| 749 |
stream: |
| 750 |
"recv_push_promise; promised request has invalid content-length {:?}; promised_id={:?}", |
| 751 |
e, |
| 752 |
promised_id, |
| 753 |
), |
| 754 |
} |
| 755 |
return Err(Error::library_reset(promised_id, Reason::PROTOCOL_ERROR)); |
| 756 |
} |
| 757 |
|
| 758 |
use super::peer::PollMessage::*; |
| 759 |
stream |
| 760 |
.pending_recv |
| 761 |
.push_back(&mut self.buffer, Event::Headers(Server(req))); |
| 762 |
stream.notify_recv(); |
| 763 |
Ok(()) |
| 764 |
} |
| 765 |
|
| 766 |
/// Ensures that `id` is not in the `Idle` state. |
| 767 |
pub fn ensure_not_idle(&self, id: StreamId) -> Result<(), Reason> { |
| 768 |
if let Ok(next) = self.next_stream_id { |
| 769 |
if id >= next { |
| 770 |
tracing::debug!( |
| 771 |
"stream ID implicitly closed, PROTOCOL_ERROR; stream={:?}", |
| 772 |
id |
| 773 |
); |
| 774 |
return Err(Reason::PROTOCOL_ERROR); |
| 775 |
} |
| 776 |
} |
| 777 |
// if next_stream_id is overflowed, that's ok. |
| 778 |
|
| 779 |
Ok(()) |
| 780 |
} |
| 781 |
|
| 782 |
/// Handle remote sending an explicit RST_STREAM. |
| 783 |
pub fn recv_reset( |
| 784 |
&mut self, |
| 785 |
frame: frame::Reset, |
| 786 |
stream: &mut Stream, |
| 787 |
counts: &mut Counts, |
| 788 |
) -> Result<(), Error> { |
| 789 |
// Reseting a stream that the user hasn't accepted is possible, |
| 790 |
// but should be done with care. These streams will continue |
| 791 |
// to take up memory in the accept queue, but will no longer be |
| 792 |
// counted as "concurrent" streams. |
| 793 |
// |
| 794 |
// So, we have a separate limit for these. |
| 795 |
// |
| 796 |
// See https://github.com/hyperium/hyper/issues/2877 |
| 797 |
if stream.is_pending_accept { |
| 798 |
if counts.can_inc_num_remote_reset_streams() { |
| 799 |
counts.inc_num_remote_reset_streams(); |
| 800 |
} else { |
| 801 |
tracing::warn!( |
| 802 |
"recv_reset; remotely-reset pending-accept streams reached limit ({:?})", |
| 803 |
counts.max_remote_reset_streams(), |
| 804 |
); |
| 805 |
return Err(Error::library_go_away_data( |
| 806 |
Reason::ENHANCE_YOUR_CALM, |
| 807 |
"too_many_resets", |
| 808 |
)); |
| 809 |
} |
| 810 |
} |
| 811 |
|
| 812 |
// Notify the stream |
| 813 |
stream.state.recv_reset(frame, stream.is_pending_send); |
| 814 |
|
| 815 |
stream.notify_send(); |
| 816 |
stream.notify_recv(); |
| 817 |
|
| 818 |
Ok(()) |
| 819 |
} |
| 820 |
|
| 821 |
/// Handle a connection-level error |
| 822 |
pub fn handle_error(&mut self, err: &proto::Error, stream: &mut Stream) { |
| 823 |
// Receive an error |
| 824 |
stream.state.handle_error(err); |
| 825 |
|
| 826 |
// If a receiver is waiting, notify it |
| 827 |
stream.notify_send(); |
| 828 |
stream.notify_recv(); |
| 829 |
} |
| 830 |
|
| 831 |
pub fn go_away(&mut self, last_processed_id: StreamId) { |
| 832 |
assert!(self.max_stream_id >= last_processed_id); |
| 833 |
self.max_stream_id = last_processed_id; |
| 834 |
} |
| 835 |
|
| 836 |
pub fn recv_eof(&mut self, stream: &mut Stream) { |
| 837 |
stream.state.recv_eof(); |
| 838 |
stream.notify_send(); |
| 839 |
stream.notify_recv(); |
| 840 |
} |
| 841 |
|
| 842 |
pub(super) fn clear_recv_buffer(&mut self, stream: &mut Stream) { |
| 843 |
while stream.pending_recv.pop_front(&mut self.buffer).is_some() { |
| 844 |
// drop it |
| 845 |
} |
| 846 |
} |
| 847 |
|
| 848 |
/// Get the max ID of streams we can receive. |
| 849 |
/// |
| 850 |
/// This gets lowered if we send a GOAWAY frame. |
| 851 |
pub fn max_stream_id(&self) -> StreamId { |
| 852 |
self.max_stream_id |
| 853 |
} |
| 854 |
|
| 855 |
pub fn next_stream_id(&self) -> Result<StreamId, Error> { |
| 856 |
if let Ok(id) = self.next_stream_id { |
| 857 |
Ok(id) |
| 858 |
} else { |
| 859 |
Err(Error::library_go_away(Reason::PROTOCOL_ERROR)) |
| 860 |
} |
| 861 |
} |
| 862 |
|
| 863 |
pub fn may_have_created_stream(&self, id: StreamId) -> bool { |
| 864 |
if let Ok(next_id) = self.next_stream_id { |
| 865 |
// Peer::is_local_init should have been called beforehand |
| 866 |
debug_assert_eq!(id.is_server_initiated(), next_id.is_server_initiated(),); |
| 867 |
id < next_id |
| 868 |
} else { |
| 869 |
true |
| 870 |
} |
| 871 |
} |
| 872 |
|
| 873 |
pub(super) fn maybe_reset_next_stream_id(&mut self, id: StreamId) { |
| 874 |
if let Ok(next_id) = self.next_stream_id { |
| 875 |
// !Peer::is_local_init should have been called beforehand |
| 876 |
debug_assert_eq!(id.is_server_initiated(), next_id.is_server_initiated()); |
| 877 |
if id >= next_id { |
| 878 |
self.next_stream_id = id.next_id(); |
| 879 |
} |
| 880 |
} |
| 881 |
} |
| 882 |
|
| 883 |
/// Returns true if the remote peer can reserve a stream with the given ID. |
| 884 |
pub fn ensure_can_reserve(&self) -> Result<(), Error> { |
| 885 |
if !self.is_push_enabled { |
| 886 |
proto_err!(conn: "recv_push_promise: push is disabled"); |
| 887 |
return Err(Error::library_go_away(Reason::PROTOCOL_ERROR)); |
| 888 |
} |
| 889 |
|
| 890 |
Ok(()) |
| 891 |
} |
| 892 |
|
| 893 |
/// Add a locally reset stream to queue to be eventually reaped. |
| 894 |
pub fn enqueue_reset_expiration(&mut self, stream: &mut store::Ptr, counts: &mut Counts) { |
| 895 |
if !stream.state.is_local_error() || stream.is_pending_reset_expiration() { |
| 896 |
return; |
| 897 |
} |
| 898 |
|
| 899 |
tracing::trace!("enqueue_reset_expiration; {:?}", stream.id); |
| 900 |
|
| 901 |
if counts.can_inc_num_reset_streams() { |
| 902 |
counts.inc_num_reset_streams(); |
| 903 |
self.pending_reset_expired.push(stream); |
| 904 |
} |
| 905 |
} |
| 906 |
|
| 907 |
/// Send any pending refusals. |
| 908 |
pub fn send_pending_refusal<T, B>( |
| 909 |
&mut self, |
| 910 |
cx: &mut Context, |
| 911 |
dst: &mut Codec<T, Prioritized<B>>, |
| 912 |
) -> Poll<io::Result<()>> |
| 913 |
where |
| 914 |
T: AsyncWrite + Unpin, |
| 915 |
B: Buf, |
| 916 |
{ |
| 917 |
if let Some(stream_id) = self.refused { |
| 918 |
ready!(dst.poll_ready(cx))?; |
| 919 |
|
| 920 |
// Create the RST_STREAM frame |
| 921 |
let frame = frame::Reset::new(stream_id, Reason::REFUSED_STREAM); |
| 922 |
|
| 923 |
// Buffer the frame |
| 924 |
dst.buffer(frame.into()).expect("invalid RST_STREAM frame"); |
| 925 |
} |
| 926 |
|
| 927 |
self.refused = None; |
| 928 |
|
| 929 |
Poll::Ready(Ok(())) |
| 930 |
} |
| 931 |
|
| 932 |
pub fn clear_expired_reset_streams(&mut self, store: &mut Store, counts: &mut Counts) { |
| 933 |
if !self.pending_reset_expired.is_empty() { |
| 934 |
let now = Instant::now(); |
| 935 |
let reset_duration = self.reset_duration; |
| 936 |
while let Some(stream) = self.pending_reset_expired.pop_if(store, |stream| { |
| 937 |
let reset_at = stream.reset_at.expect("reset_at must be set if in queue"); |
| 938 |
// rust-lang/rust#86470 tracks a bug in the standard library where `Instant` |
| 939 |
// subtraction can panic (because, on some platforms, `Instant` isn't actually |
| 940 |
// monotonic). We use a saturating operation to avoid this panic here. |
| 941 |
now.saturating_duration_since(reset_at) > reset_duration |
| 942 |
}) { |
| 943 |
counts.transition_after(stream, true); |
| 944 |
} |
| 945 |
} |
| 946 |
} |
| 947 |
|
| 948 |
pub fn clear_queues( |
| 949 |
&mut self, |
| 950 |
clear_pending_accept: bool, |
| 951 |
store: &mut Store, |
| 952 |
counts: &mut Counts, |
| 953 |
) { |
| 954 |
self.clear_stream_window_update_queue(store, counts); |
| 955 |
self.clear_all_reset_streams(store, counts); |
| 956 |
|
| 957 |
if clear_pending_accept { |
| 958 |
self.clear_all_pending_accept(store, counts); |
| 959 |
} |
| 960 |
} |
| 961 |
|
| 962 |
fn clear_stream_window_update_queue(&mut self, store: &mut Store, counts: &mut Counts) { |
| 963 |
while let Some(stream) = self.pending_window_updates.pop(store) { |
| 964 |
counts.transition(stream, |_, stream| { |
| 965 |
tracing::trace!("clear_stream_window_update_queue; stream={:?}", stream.id); |
| 966 |
}) |
| 967 |
} |
| 968 |
} |
| 969 |
|
| 970 |
/// Called on EOF |
| 971 |
fn clear_all_reset_streams(&mut self, store: &mut Store, counts: &mut Counts) { |
| 972 |
while let Some(stream) = self.pending_reset_expired.pop(store) { |
| 973 |
counts.transition_after(stream, true); |
| 974 |
} |
| 975 |
} |
| 976 |
|
| 977 |
fn clear_all_pending_accept(&mut self, store: &mut Store, counts: &mut Counts) { |
| 978 |
while let Some(stream) = self.pending_accept.pop(store) { |
| 979 |
counts.transition_after(stream, false); |
| 980 |
} |
| 981 |
} |
| 982 |
|
| 983 |
pub fn poll_complete<T, B>( |
| 984 |
&mut self, |
| 985 |
cx: &mut Context, |
| 986 |
store: &mut Store, |
| 987 |
counts: &mut Counts, |
| 988 |
dst: &mut Codec<T, Prioritized<B>>, |
| 989 |
) -> Poll<io::Result<()>> |
| 990 |
where |
| 991 |
T: AsyncWrite + Unpin, |
| 992 |
B: Buf, |
| 993 |
{ |
| 994 |
// Send any pending connection level window updates |
| 995 |
ready!(self.send_connection_window_update(cx, dst))?; |
| 996 |
|
| 997 |
// Send any pending stream level window updates |
| 998 |
ready!(self.send_stream_window_updates(cx, store, counts, dst))?; |
| 999 |
|
| 1000 |
Poll::Ready(Ok(())) |
| 1001 |
} |
| 1002 |
|
| 1003 |
/// Send connection level window update |
| 1004 |
fn send_connection_window_update<T, B>( |
| 1005 |
&mut self, |
| 1006 |
cx: &mut Context, |
| 1007 |
dst: &mut Codec<T, Prioritized<B>>, |
| 1008 |
) -> Poll<io::Result<()>> |
| 1009 |
where |
| 1010 |
T: AsyncWrite + Unpin, |
| 1011 |
B: Buf, |
| 1012 |
{ |
| 1013 |
if let Some(incr) = self.flow.unclaimed_capacity() { |
| 1014 |
let frame = frame::WindowUpdate::new(StreamId::zero(), incr); |
| 1015 |
|
| 1016 |
// Ensure the codec has capacity |
| 1017 |
ready!(dst.poll_ready(cx))?; |
| 1018 |
|
| 1019 |
// Buffer the WINDOW_UPDATE frame |
| 1020 |
dst.buffer(frame.into()) |
| 1021 |
.expect("invalid WINDOW_UPDATE frame"); |
| 1022 |
|
| 1023 |
// Update flow control |
| 1024 |
self.flow |
| 1025 |
.inc_window(incr) |
| 1026 |
.expect("unexpected flow control state"); |
| 1027 |
} |
| 1028 |
|
| 1029 |
Poll::Ready(Ok(())) |
| 1030 |
} |
| 1031 |
|
| 1032 |
/// Send stream level window update |
| 1033 |
pub fn send_stream_window_updates<T, B>( |
| 1034 |
&mut self, |
| 1035 |
cx: &mut Context, |
| 1036 |
store: &mut Store, |
| 1037 |
counts: &mut Counts, |
| 1038 |
dst: &mut Codec<T, Prioritized<B>>, |
| 1039 |
) -> Poll<io::Result<()>> |
| 1040 |
where |
| 1041 |
T: AsyncWrite + Unpin, |
| 1042 |
B: Buf, |
| 1043 |
{ |
| 1044 |
loop { |
| 1045 |
// Ensure the codec has capacity |
| 1046 |
ready!(dst.poll_ready(cx))?; |
| 1047 |
|
| 1048 |
// Get the next stream |
| 1049 |
let stream = match self.pending_window_updates.pop(store) { |
| 1050 |
Some(stream) => stream, |
| 1051 |
None => return Poll::Ready(Ok(())), |
| 1052 |
}; |
| 1053 |
|
| 1054 |
counts.transition(stream, |_, stream| { |
| 1055 |
tracing::trace!("pending_window_updates -- pop; stream={:?}", stream.id); |
| 1056 |
debug_assert!(!stream.is_pending_window_update); |
| 1057 |
|
| 1058 |
if !stream.state.is_recv_streaming() { |
| 1059 |
// No need to send window updates on the stream if the stream is |
| 1060 |
// no longer receiving data. |
| 1061 |
// |
| 1062 |
// TODO: is this correct? We could possibly send a window |
| 1063 |
// update on a ReservedRemote stream if we already know |
| 1064 |
// we want to stream the data faster... |
| 1065 |
return; |
| 1066 |
} |
| 1067 |
|
| 1068 |
// TODO: de-dup |
| 1069 |
if let Some(incr) = stream.recv_flow.unclaimed_capacity() { |
| 1070 |
// Create the WINDOW_UPDATE frame |
| 1071 |
let frame = frame::WindowUpdate::new(stream.id, incr); |
| 1072 |
|
| 1073 |
// Buffer it |
| 1074 |
dst.buffer(frame.into()) |
| 1075 |
.expect("invalid WINDOW_UPDATE frame"); |
| 1076 |
|
| 1077 |
// Update flow control |
| 1078 |
stream |
| 1079 |
.recv_flow |
| 1080 |
.inc_window(incr) |
| 1081 |
.expect("unexpected flow control state"); |
| 1082 |
} |
| 1083 |
}) |
| 1084 |
} |
| 1085 |
} |
| 1086 |
|
| 1087 |
pub fn next_incoming(&mut self, store: &mut Store) -> Option<store::Key> { |
| 1088 |
self.pending_accept.pop(store).map(|ptr| ptr.key()) |
| 1089 |
} |
| 1090 |
|
| 1091 |
pub fn poll_data( |
| 1092 |
&mut self, |
| 1093 |
cx: &Context, |
| 1094 |
stream: &mut Stream, |
| 1095 |
) -> Poll<Option<Result<Bytes, proto::Error>>> { |
| 1096 |
match stream.pending_recv.pop_front(&mut self.buffer) { |
| 1097 |
Some(Event::Data(payload)) => Poll::Ready(Some(Ok(payload))), |
| 1098 |
Some(event) => { |
| 1099 |
// Frame is trailer |
| 1100 |
stream.pending_recv.push_front(&mut self.buffer, event); |
| 1101 |
|
| 1102 |
// Notify the recv task. This is done just in case |
| 1103 |
// `poll_trailers` was called. |
| 1104 |
// |
| 1105 |
// It is very likely that `notify_recv` will just be a no-op (as |
| 1106 |
// the task will be None), so this isn't really much of a |
| 1107 |
// performance concern. It also means we don't have to track |
| 1108 |
// state to see if `poll_trailers` was called before `poll_data` |
| 1109 |
// returned `None`. |
| 1110 |
stream.notify_recv(); |
| 1111 |
|
| 1112 |
// No more data frames |
| 1113 |
Poll::Ready(None) |
| 1114 |
} |
| 1115 |
None => self.schedule_recv(cx, stream), |
| 1116 |
} |
| 1117 |
} |
| 1118 |
|
| 1119 |
pub fn poll_trailers( |
| 1120 |
&mut self, |
| 1121 |
cx: &Context, |
| 1122 |
stream: &mut Stream, |
| 1123 |
) -> Poll<Option<Result<HeaderMap, proto::Error>>> { |
| 1124 |
match stream.pending_recv.pop_front(&mut self.buffer) { |
| 1125 |
Some(Event::Trailers(trailers)) => Poll::Ready(Some(Ok(trailers))), |
| 1126 |
Some(event) => { |
| 1127 |
// Frame is not trailers.. not ready to poll trailers yet. |
| 1128 |
stream.pending_recv.push_front(&mut self.buffer, event); |
| 1129 |
|
| 1130 |
Poll::Pending |
| 1131 |
} |
| 1132 |
None => self.schedule_recv(cx, stream), |
| 1133 |
} |
| 1134 |
} |
| 1135 |
|
| 1136 |
fn schedule_recv<T>( |
| 1137 |
&mut self, |
| 1138 |
cx: &Context, |
| 1139 |
stream: &mut Stream, |
| 1140 |
) -> Poll<Option<Result<T, proto::Error>>> { |
| 1141 |
if stream.state.ensure_recv_open()? { |
| 1142 |
// Request to get notified once more frames arrive |
| 1143 |
stream.recv_task = Some(cx.waker().clone()); |
| 1144 |
Poll::Pending |
| 1145 |
} else { |
| 1146 |
// No more frames will be received |
| 1147 |
Poll::Ready(None) |
| 1148 |
} |
| 1149 |
} |
| 1150 |
} |
| 1151 |
|
| 1152 |
// ===== impl Open ===== |
| 1153 |
|
| 1154 |
impl Open { |
| 1155 |
pub fn is_push_promise(&self) -> bool { |
| 1156 |
matches!(*self, Self::PushPromise) |
| 1157 |
} |
| 1158 |
} |
| 1159 |
|
| 1160 |
// ===== impl RecvHeaderBlockError ===== |
| 1161 |
|
| 1162 |
impl<T> From<Error> for RecvHeaderBlockError<T> { |
| 1163 |
fn from(err: Error) -> Self { |
| 1164 |
RecvHeaderBlockError::State(err) |
| 1165 |
} |
| 1166 |
} |