Debian Codegraph @

external/boringssl/crypto/rc4/asm/rc4-x86_64.pl

raw
1 #!/usr/bin/env perl
2 #
3 # ====================================================================
4 # Written by Andy Polyakov <[email protected]> for the OpenSSL
5 # project. The module is, however, dual licensed under OpenSSL and
6 # CRYPTOGAMS licenses depending on where you obtain it. For further
7 # details see http://www.openssl.org/~appro/cryptogams/.
8 # ====================================================================
9 #
10 # July 2004
11 #
12 # 2.22x RC4 tune-up:-) It should be noted though that my hand [as in
13 # "hand-coded assembler"] doesn't stand for the whole improvement
14 # coefficient. It turned out that eliminating RC4_CHAR from config
15 # line results in ~40% improvement (yes, even for C implementation).
16 # Presumably it has everything to do with AMD cache architecture and
17 # RAW or whatever penalties. Once again! The module *requires* config
18 # line *without* RC4_CHAR! As for coding "secret," I bet on partial
19 # register arithmetics. For example instead of 'inc %r8; and $255,%r8'
20 # I simply 'inc %r8b'. Even though optimization manual discourages
21 # to operate on partial registers, it turned out to be the best bet.
22 # At least for AMD... How IA32E would perform remains to be seen...
23
24 # November 2004
25 #
26 # As was shown by Marc Bevand reordering of couple of load operations
27 # results in even higher performance gain of 3.3x:-) At least on
28 # Opteron... For reference, 1x in this case is RC4_CHAR C-code
29 # compiled with gcc 3.3.2, which performs at ~54MBps per 1GHz clock.
30 # Latter means that if you want to *estimate* what to expect from
31 # *your* Opteron, then multiply 54 by 3.3 and clock frequency in GHz.
32
33 # November 2004
34 #
35 # Intel P4 EM64T core was found to run the AMD64 code really slow...
36 # The only way to achieve comparable performance on P4 was to keep
37 # RC4_CHAR. Kind of ironic, huh? As it's apparently impossible to
38 # compose blended code, which would perform even within 30% marginal
39 # on either AMD and Intel platforms, I implement both cases. See
40 # rc4_skey.c for further details...
41
42 # April 2005
43 #
44 # P4 EM64T core appears to be "allergic" to 64-bit inc/dec. Replacing
45 # those with add/sub results in 50% performance improvement of folded
46 # loop...
47
48 # May 2005
49 #
50 # As was shown by Zou Nanhai loop unrolling can improve Intel EM64T
51 # performance by >30% [unlike P4 32-bit case that is]. But this is
52 # provided that loads are reordered even more aggressively! Both code
53 # pathes, AMD64 and EM64T, reorder loads in essentially same manner
54 # as my IA-64 implementation. On Opteron this resulted in modest 5%
55 # improvement [I had to test it], while final Intel P4 performance
56 # achieves respectful 432MBps on 2.8GHz processor now. For reference.
57 # If executed on Xeon, current RC4_CHAR code-path is 2.7x faster than
58 # RC4_INT code-path. While if executed on Opteron, it's only 25%
59 # slower than the RC4_INT one [meaning that if CPU µ-arch detection
60 # is not implemented, then this final RC4_CHAR code-path should be
61 # preferred, as it provides better *all-round* performance].
62
63 # March 2007
64 #
65 # Intel Core2 was observed to perform poorly on both code paths:-( It
66 # apparently suffers from some kind of partial register stall, which
67 # occurs in 64-bit mode only [as virtually identical 32-bit loop was
68 # observed to outperform 64-bit one by almost 50%]. Adding two movzb to
69 # cloop1 boosts its performance by 80%! This loop appears to be optimal
70 # fit for Core2 and therefore the code was modified to skip cloop8 on
71 # this CPU.
72
73 # May 2010
74 #
75 # Intel Westmere was observed to perform suboptimally. Adding yet
76 # another movzb to cloop1 improved performance by almost 50%! Core2
77 # performance is improved too, but nominally...
78
79 # May 2011
80 #
81 # The only code path that was not modified is P4-specific one. Non-P4
82 # Intel code path optimization is heavily based on submission by Maxim
83 # Perminov, Maxim Locktyukhin and Jim Guilford of Intel. I've used
84 # some of the ideas even in attempt to optmize the original RC4_INT
85 # code path... Current performance in cycles per processed byte (less
86 # is better) and improvement coefficients relative to previous
87 # version of this module are:
88 #
89 # Opteron 5.3/+0%(*)
90 # P4 6.5
91 # Core2 6.2/+15%(**)
92 # Westmere 4.2/+60%
93 # Sandy Bridge 4.2/+120%
94 # Atom 9.3/+80%
95 #
96 # (*) But corresponding loop has less instructions, which should have
97 # positive effect on upcoming Bulldozer, which has one less ALU.
98 # For reference, Intel code runs at 6.8 cpb rate on Opteron.
99 # (**) Note that Core2 result is ~15% lower than corresponding result
100 # for 32-bit code, meaning that it's possible to improve it,
101 # but more than likely at the cost of the others (see rc4-586.pl
102 # to get the idea)...
103
104 $flavour = shift;
105 $output = shift;
106 if ($flavour =~ /\./) { $output = $flavour; undef $flavour; }
107
108 $win64=0; $win64=1 if ($flavour =~ /[nm]asm|mingw64/ || $output =~ /\.asm$/);
109
110 $0 =~ m/(.*[\/\\])[^\/\\]+$/; $dir=$1;
111 ( $xlate="${dir}x86_64-xlate.pl" and -f $xlate ) or
112 ( $xlate="${dir}../../perlasm/x86_64-xlate.pl" and -f $xlate) or
113 die "can't locate x86_64-xlate.pl";
114
115 open OUT,"| \"$^X\" $xlate $flavour $output";
116 *STDOUT=*OUT;
117
118 $dat="%rdi"; # arg1
119 $len="%rsi"; # arg2
120 $inp="%rdx"; # arg3
121 $out="%rcx"; # arg4
122
123 {
124 $code=<<___;
125 .text
126 .extern OPENSSL_ia32cap_P
127
128 .globl asm_RC4
129 .type asm_RC4,\@function,4
130 .align 16
131 asm_RC4:
132 or $len,$len
133 jne .Lentry
134 ret
135 .Lentry:
136 push %rbx
137 push %r12
138 push %r13
139 .Lprologue:
140 mov $len,%r11
141 mov $inp,%r12
142 mov $out,%r13
143 ___
144 my $len="%r11"; # reassign input arguments
145 my $inp="%r12";
146 my $out="%r13";
147
148 my @XX=("%r10","%rsi");
149 my @TX=("%rax","%rbx");
150 my $YY="%rcx";
151 my $TY="%rdx";
152
153 $code.=<<___;
154 xor $XX[0],$XX[0]
155 xor $YY,$YY
156
157 lea 8($dat),$dat
158 mov -8($dat),$XX[0]#b
159 mov -4($dat),$YY#b
160 cmpl \$-1,256($dat)
161 je .LRC4_CHAR
162 mov OPENSSL_ia32cap_P(%rip),%r8d
163 xor $TX[1],$TX[1]
164 inc $XX[0]#b
165 sub $XX[0],$TX[1]
166 sub $inp,$out
167 movl ($dat,$XX[0],4),$TX[0]#d
168 test \$-16,$len
169 jz .Lloop1
170 bt \$30,%r8d # Intel CPU?
171 jc .Lintel
172 and \$7,$TX[1]
173 lea 1($XX[0]),$XX[1]
174 jz .Loop8
175 sub $TX[1],$len
176 .Loop8_warmup:
177 add $TX[0]#b,$YY#b
178 movl ($dat,$YY,4),$TY#d
179 movl $TX[0]#d,($dat,$YY,4)
180 movl $TY#d,($dat,$XX[0],4)
181 add $TY#b,$TX[0]#b
182 inc $XX[0]#b
183 movl ($dat,$TX[0],4),$TY#d
184 movl ($dat,$XX[0],4),$TX[0]#d
185 xorb ($inp),$TY#b
186 movb $TY#b,($out,$inp)
187 lea 1($inp),$inp
188 dec $TX[1]
189 jnz .Loop8_warmup
190
191 lea 1($XX[0]),$XX[1]
192 jmp .Loop8
193 .align 16
194 .Loop8:
195 ___
196 for ($i=0;$i<8;$i++) {
197 $code.=<<___ if ($i==7);
198 add \$8,$XX[1]#b
199 ___
200 $code.=<<___;
201 add $TX[0]#b,$YY#b
202 movl ($dat,$YY,4),$TY#d
203 movl $TX[0]#d,($dat,$YY,4)
204 movl `4*($i==7?-1:$i)`($dat,$XX[1],4),$TX[1]#d
205 ror \$8,%r8 # ror is redundant when $i=0
206 movl $TY#d,4*$i($dat,$XX[0],4)
207 add $TX[0]#b,$TY#b
208 movb ($dat,$TY,4),%r8b
209 ___
210 push(@TX,shift(@TX)); #push(@XX,shift(@XX)); # "rotate" registers
211 }
212 $code.=<<___;
213 add \$8,$XX[0]#b
214 ror \$8,%r8
215 sub \$8,$len
216
217 xor ($inp),%r8
218 mov %r8,($out,$inp)
219 lea 8($inp),$inp
220
221 test \$-8,$len
222 jnz .Loop8
223 cmp \$0,$len
224 jne .Lloop1
225 jmp .Lexit
226
227 .align 16
228 .Lintel:
229 test \$-32,$len
230 jz .Lloop1
231 and \$15,$TX[1]
232 jz .Loop16_is_hot
233 sub $TX[1],$len
234 .Loop16_warmup:
235 add $TX[0]#b,$YY#b
236 movl ($dat,$YY,4),$TY#d
237 movl $TX[0]#d,($dat,$YY,4)
238 movl $TY#d,($dat,$XX[0],4)
239 add $TY#b,$TX[0]#b
240 inc $XX[0]#b
241 movl ($dat,$TX[0],4),$TY#d
242 movl ($dat,$XX[0],4),$TX[0]#d
243 xorb ($inp),$TY#b
244 movb $TY#b,($out,$inp)
245 lea 1($inp),$inp
246 dec $TX[1]
247 jnz .Loop16_warmup
248
249 mov $YY,$TX[1]
250 xor $YY,$YY
251 mov $TX[1]#b,$YY#b
252
253 .Loop16_is_hot:
254 lea ($dat,$XX[0],4),$XX[1]
255 ___
256 sub RC4_loop {
257 my $i=shift;
258 my $j=$i<0?0:$i;
259 my $xmm="%xmm".($j&1);
260
261 $code.=" add \$16,$XX[0]#b\n" if ($i==15);
262 $code.=" movdqu ($inp),%xmm2\n" if ($i==15);
263 $code.=" add $TX[0]#b,$YY#b\n" if ($i<=0);
264 $code.=" movl ($dat,$YY,4),$TY#d\n";
265 $code.=" pxor %xmm0,%xmm2\n" if ($i==0);
266 $code.=" psllq \$8,%xmm1\n" if ($i==0);
267 $code.=" pxor $xmm,$xmm\n" if ($i<=1);
268 $code.=" movl $TX[0]#d,($dat,$YY,4)\n";
269 $code.=" add $TY#b,$TX[0]#b\n";
270 $code.=" movl `4*($j+1)`($XX[1]),$TX[1]#d\n" if ($i<15);
271 $code.=" movz $TX[0]#b,$TX[0]#d\n";
272 $code.=" movl $TY#d,4*$j($XX[1])\n";
273 $code.=" pxor %xmm1,%xmm2\n" if ($i==0);
274 $code.=" lea ($dat,$XX[0],4),$XX[1]\n" if ($i==15);
275 $code.=" add $TX[1]#b,$YY#b\n" if ($i<15);
276 $code.=" pinsrw \$`($j>>1)&7`,($dat,$TX[0],4),$xmm\n";
277 $code.=" movdqu %xmm2,($out,$inp)\n" if ($i==0);
278 $code.=" lea 16($inp),$inp\n" if ($i==0);
279 $code.=" movl ($XX[1]),$TX[1]#d\n" if ($i==15);
280 }
281 RC4_loop(-1);
282 $code.=<<___;
283 jmp .Loop16_enter
284 .align 16
285 .Loop16:
286 ___
287
288 for ($i=0;$i<16;$i++) {
289 $code.=".Loop16_enter:\n" if ($i==1);
290 RC4_loop($i);
291 push(@TX,shift(@TX)); # "rotate" registers
292 }
293 $code.=<<___;
294 mov $YY,$TX[1]
295 xor $YY,$YY # keyword to partial register
296 sub \$16,$len
297 mov $TX[1]#b,$YY#b
298 test \$-16,$len
299 jnz .Loop16
300
301 psllq \$8,%xmm1
302 pxor %xmm0,%xmm2
303 pxor %xmm1,%xmm2
304 movdqu %xmm2,($out,$inp)
305 lea 16($inp),$inp
306
307 cmp \$0,$len
308 jne .Lloop1
309 jmp .Lexit
310
311 .align 16
312 .Lloop1:
313 add $TX[0]#b,$YY#b
314 movl ($dat,$YY,4),$TY#d
315 movl $TX[0]#d,($dat,$YY,4)
316 movl $TY#d,($dat,$XX[0],4)
317 add $TY#b,$TX[0]#b
318 inc $XX[0]#b
319 movl ($dat,$TX[0],4),$TY#d
320 movl ($dat,$XX[0],4),$TX[0]#d
321 xorb ($inp),$TY#b
322 movb $TY#b,($out,$inp)
323 lea 1($inp),$inp
324 dec $len
325 jnz .Lloop1
326 jmp .Lexit
327
328 .align 16
329 .LRC4_CHAR:
330 add \$1,$XX[0]#b
331 movzb ($dat,$XX[0]),$TX[0]#d
332 test \$-8,$len
333 jz .Lcloop1
334 jmp .Lcloop8
335 .align 16
336 .Lcloop8:
337 mov ($inp),%r8d
338 mov 4($inp),%r9d
339 ___
340 # unroll 2x4-wise, because 64-bit rotates kill Intel P4...
341 for ($i=0;$i<4;$i++) {
342 $code.=<<___;
343 add $TX[0]#b,$YY#b
344 lea 1($XX[0]),$XX[1]
345 movzb ($dat,$YY),$TY#d
346 movzb $XX[1]#b,$XX[1]#d
347 movzb ($dat,$XX[1]),$TX[1]#d
348 movb $TX[0]#b,($dat,$YY)
349 cmp $XX[1],$YY
350 movb $TY#b,($dat,$XX[0])
351 jne .Lcmov$i # Intel cmov is sloooow...
352 mov $TX[0],$TX[1]
353 .Lcmov$i:
354 add $TX[0]#b,$TY#b
355 xor ($dat,$TY),%r8b
356 ror \$8,%r8d
357 ___
358 push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
359 }
360 for ($i=4;$i<8;$i++) {
361 $code.=<<___;
362 add $TX[0]#b,$YY#b
363 lea 1($XX[0]),$XX[1]
364 movzb ($dat,$YY),$TY#d
365 movzb $XX[1]#b,$XX[1]#d
366 movzb ($dat,$XX[1]),$TX[1]#d
367 movb $TX[0]#b,($dat,$YY)
368 cmp $XX[1],$YY
369 movb $TY#b,($dat,$XX[0])
370 jne .Lcmov$i # Intel cmov is sloooow...
371 mov $TX[0],$TX[1]
372 .Lcmov$i:
373 add $TX[0]#b,$TY#b
374 xor ($dat,$TY),%r9b
375 ror \$8,%r9d
376 ___
377 push(@TX,shift(@TX)); push(@XX,shift(@XX)); # "rotate" registers
378 }
379 $code.=<<___;
380 lea -8($len),$len
381 mov %r8d,($out)
382 lea 8($inp),$inp
383 mov %r9d,4($out)
384 lea 8($out),$out
385
386 test \$-8,$len
387 jnz .Lcloop8
388 cmp \$0,$len
389 jne .Lcloop1
390 jmp .Lexit
391 ___
392 $code.=<<___;
393 .align 16
394 .Lcloop1:
395 add $TX[0]#b,$YY#b
396 movzb $YY#b,$YY#d
397 movzb ($dat,$YY),$TY#d
398 movb $TX[0]#b,($dat,$YY)
399 movb $TY#b,($dat,$XX[0])
400 add $TX[0]#b,$TY#b
401 add \$1,$XX[0]#b
402 movzb $TY#b,$TY#d
403 movzb $XX[0]#b,$XX[0]#d
404 movzb ($dat,$TY),$TY#d
405 movzb ($dat,$XX[0]),$TX[0]#d
406 xorb ($inp),$TY#b
407 lea 1($inp),$inp
408 movb $TY#b,($out)
409 lea 1($out),$out
410 sub \$1,$len
411 jnz .Lcloop1
412 jmp .Lexit
413
414 .align 16
415 .Lexit:
416 sub \$1,$XX[0]#b
417 movl $XX[0]#d,-8($dat)
418 movl $YY#d,-4($dat)
419
420 mov (%rsp),%r13
421 mov 8(%rsp),%r12
422 mov 16(%rsp),%rbx
423 add \$24,%rsp
424 .Lepilogue:
425 ret
426 .size asm_RC4,.-asm_RC4
427 ___
428 }
429
430 $idx="%r8";
431 $ido="%r9";
432
433 $code.=<<___;
434 .globl asm_RC4_set_key
435 .type asm_RC4_set_key,\@function,3
436 .align 16
437 asm_RC4_set_key:
438 lea 8($dat),$dat
439 lea ($inp,$len),$inp
440 neg $len
441 mov $len,%rcx
442 xor %eax,%eax
443 xor $ido,$ido
444 xor %r10,%r10
445 xor %r11,%r11
446
447 mov OPENSSL_ia32cap_P(%rip),$idx#d
448 bt \$20,$idx#d # RC4_CHAR?
449 jc .Lc1stloop
450 jmp .Lw1stloop
451
452 .align 16
453 .Lw1stloop:
454 mov %eax,($dat,%rax,4)
455 add \$1,%al
456 jnc .Lw1stloop
457
458 xor $ido,$ido
459 xor $idx,$idx
460 .align 16
461 .Lw2ndloop:
462 mov ($dat,$ido,4),%r10d
463 add ($inp,$len,1),$idx#b
464 add %r10b,$idx#b
465 add \$1,$len
466 mov ($dat,$idx,4),%r11d
467 cmovz %rcx,$len
468 mov %r10d,($dat,$idx,4)
469 mov %r11d,($dat,$ido,4)
470 add \$1,$ido#b
471 jnc .Lw2ndloop
472 jmp .Lexit_key
473
474 .align 16
475 .Lc1stloop:
476 mov %al,($dat,%rax)
477 add \$1,%al
478 jnc .Lc1stloop
479
480 xor $ido,$ido
481 xor $idx,$idx
482 .align 16
483 .Lc2ndloop:
484 mov ($dat,$ido),%r10b
485 add ($inp,$len),$idx#b
486 add %r10b,$idx#b
487 add \$1,$len
488 mov ($dat,$idx),%r11b
489 jnz .Lcnowrap
490 mov %rcx,$len
491 .Lcnowrap:
492 mov %r10b,($dat,$idx)
493 mov %r11b,($dat,$ido)
494 add \$1,$ido#b
495 jnc .Lc2ndloop
496 movl \$-1,256($dat)
497
498 .align 16
499 .Lexit_key:
500 xor %eax,%eax
501 mov %eax,-8($dat)
502 mov %eax,-4($dat)
503 ret
504 .size asm_RC4_set_key,.-asm_RC4_set_key
505 ___
506
507 # EXCEPTION_DISPOSITION handler (EXCEPTION_RECORD *rec,ULONG64 frame,
508 # CONTEXT *context,DISPATCHER_CONTEXT *disp)
509 if ($win64) {
510 $rec="%rcx";
511 $frame="%rdx";
512 $context="%r8";
513 $disp="%r9";
514
515 $code.=<<___;
516 .extern __imp_RtlVirtualUnwind
517 .type stream_se_handler,\@abi-omnipotent
518 .align 16
519 stream_se_handler:
520 push %rsi
521 push %rdi
522 push %rbx
523 push %rbp
524 push %r12
525 push %r13
526 push %r14
527 push %r15
528 pushfq
529 sub \$64,%rsp
530
531 mov 120($context),%rax # pull context->Rax
532 mov 248($context),%rbx # pull context->Rip
533
534 lea .Lprologue(%rip),%r10
535 cmp %r10,%rbx # context->Rip<prologue label
536 jb .Lin_prologue
537
538 mov 152($context),%rax # pull context->Rsp
539
540 lea .Lepilogue(%rip),%r10
541 cmp %r10,%rbx # context->Rip>=epilogue label
542 jae .Lin_prologue
543
544 lea 24(%rax),%rax
545
546 mov -8(%rax),%rbx
547 mov -16(%rax),%r12
548 mov -24(%rax),%r13
549 mov %rbx,144($context) # restore context->Rbx
550 mov %r12,216($context) # restore context->R12
551 mov %r13,224($context) # restore context->R13
552
553 .Lin_prologue:
554 mov 8(%rax),%rdi
555 mov 16(%rax),%rsi
556 mov %rax,152($context) # restore context->Rsp
557 mov %rsi,168($context) # restore context->Rsi
558 mov %rdi,176($context) # restore context->Rdi
559
560 jmp .Lcommon_seh_exit
561 .size stream_se_handler,.-stream_se_handler
562
563 .type key_se_handler,\@abi-omnipotent
564 .align 16
565 key_se_handler:
566 push %rsi
567 push %rdi
568 push %rbx
569 push %rbp
570 push %r12
571 push %r13
572 push %r14
573 push %r15
574 pushfq
575 sub \$64,%rsp
576
577 mov 152($context),%rax # pull context->Rsp
578 mov 8(%rax),%rdi
579 mov 16(%rax),%rsi
580 mov %rsi,168($context) # restore context->Rsi
581 mov %rdi,176($context) # restore context->Rdi
582
583 .Lcommon_seh_exit:
584
585 mov 40($disp),%rdi # disp->ContextRecord
586 mov $context,%rsi # context
587 mov \$154,%ecx # sizeof(CONTEXT)
588 .long 0xa548f3fc # cld; rep movsq
589
590 mov $disp,%rsi
591 xor %rcx,%rcx # arg1, UNW_FLAG_NHANDLER
592 mov 8(%rsi),%rdx # arg2, disp->ImageBase
593 mov 0(%rsi),%r8 # arg3, disp->ControlPc
594 mov 16(%rsi),%r9 # arg4, disp->FunctionEntry
595 mov 40(%rsi),%r10 # disp->ContextRecord
596 lea 56(%rsi),%r11 # &disp->HandlerData
597 lea 24(%rsi),%r12 # &disp->EstablisherFrame
598 mov %r10,32(%rsp) # arg5
599 mov %r11,40(%rsp) # arg6
600 mov %r12,48(%rsp) # arg7
601 mov %rcx,56(%rsp) # arg8, (NULL)
602 call *__imp_RtlVirtualUnwind(%rip)
603
604 mov \$1,%eax # ExceptionContinueSearch
605 add \$64,%rsp
606 popfq
607 pop %r15
608 pop %r14
609 pop %r13
610 pop %r12
611 pop %rbp
612 pop %rbx
613 pop %rdi
614 pop %rsi
615 ret
616 .size key_se_handler,.-key_se_handler
617
618 .section .pdata
619 .align 4
620 .rva .LSEH_begin_asm_RC4
621 .rva .LSEH_end_asm_RC4
622 .rva .LSEH_info_asm_RC4
623
624 .rva .LSEH_begin_asm_RC4_set_key
625 .rva .LSEH_end_asm_RC4_set_key
626 .rva .LSEH_info_asm_RC4_set_key
627
628 .section .xdata
629 .align 8
630 .LSEH_info_asm_RC4:
631 .byte 9,0,0,0
632 .rva stream_se_handler
633 .LSEH_info_asm_RC4_set_key:
634 .byte 9,0,0,0
635 .rva key_se_handler
636 ___
637 }
638
639 sub reg_part {
640 my ($reg,$conv)=@_;
641 if ($reg =~ /%r[0-9]+/) { $reg .= $conv; }
642 elsif ($conv eq "b") { $reg =~ s/%[er]([^x]+)x?/%$1l/; }
643 elsif ($conv eq "w") { $reg =~ s/%[er](.+)/%$1/; }
644 elsif ($conv eq "d") { $reg =~ s/%[er](.+)/%e$1/; }
645 return $reg;
646 }
647
648 $code =~ s/(%[a-z0-9]+)#([bwd])/reg_part($1,$2)/gem;
649 $code =~ s/\`([^\`]*)\`/eval $1/gem;
650
651 print $code;
652
653 close STDOUT;