Debian Codegraph @

examples/coarse_grained/membrane_examples/membrane+protein_vesicle_Br2005+Be2010/moltemplate_files/1beadProtSci2010.lt

raw
1 # This file defines a 4-helix bundle coarse-grained protein model (AUF2) used in
2 # G. Bellesia, AI Jewett, and J-E Shea,
3 # Protein Science, Vol19 141-154 (2010)
4 #
5 # Strategy:
6 #
7 #1) First I'll define some building blocks (A16, B16, T3)
8 # which are helices, sheets and turns of a predetermined length)
9 #
10 #2) Then I'll copy and paste them together to build
11 # a 4-helix bundle (or a 4-strand beta-barrel).
12 # This approach is optional. If your protein has helices which are not
13 # identical, you should probably just include all 4 helices in a single
14 # "Data Atoms" section and don't try to subdivide the protein into pieces.)
15
16
17
18 1beadProtSci2010 { # <-- enclose definitions in a namespace for portability
19
20 # A16 is a coarse-grained alpha-helix containing 16 residues (one "atom" each)
21
22 A16 {
23
24 # AtomID MoleculeID AtomType Charge X Y Z
25
26 write('Data Atoms') {
27 $atom:a1 $mol:... @atom:../sL 0.0 -2.4 -2.4 0.0
28 $atom:a2 $mol:... @atom:../sL 0.0 2.4 -2.4 3.6
29 $atom:a3 $mol:... @atom:../sH 0.0 2.4 2.4 7.2
30 $atom:a4 $mol:... @atom:../sH 0.0 -2.4 2.4 10.8
31 $atom:a5 $mol:... @atom:../sL 0.0 -2.4 -2.4 14.4
32 $atom:a6 $mol:... @atom:../sL 0.0 2.4 -2.4 18.0
33 $atom:a7 $mol:... @atom:../sH 0.0 2.4 2.4 21.6
34 $atom:a8 $mol:... @atom:../sH 0.0 -2.4 2.4 25.2
35 $atom:a9 $mol:... @atom:../sL 0.0 -2.4 -2.4 28.8
36 $atom:a10 $mol:... @atom:../sL 0.0 2.4 -2.4 32.4
37 $atom:a11 $mol:... @atom:../sH 0.0 2.4 2.4 36.0
38 $atom:a12 $mol:... @atom:../sH 0.0 -2.4 2.4 39.6
39 $atom:a13 $mol:... @atom:../sL 0.0 -2.4 -2.4 43.2
40 $atom:a14 $mol:... @atom:../sL 0.0 2.4 -2.4 46.8
41 $atom:a15 $mol:... @atom:../sH 0.0 2.4 2.4 50.4
42 $atom:a16 $mol:... @atom:../sH 0.0 -2.4 2.4 54.0
43 }
44
45 write('Data Bonds') {
46 $bond:b1 @bond:../backbone $atom:a1 $atom:a2
47 $bond:b2 @bond:../backbone $atom:a2 $atom:a3
48 $bond:b3 @bond:../backbone $atom:a3 $atom:a4
49 $bond:b4 @bond:../backbone $atom:a4 $atom:a5
50 $bond:b5 @bond:../backbone $atom:a5 $atom:a6
51 $bond:b6 @bond:../backbone $atom:a6 $atom:a7
52 $bond:b7 @bond:../backbone $atom:a7 $atom:a8
53 $bond:b8 @bond:../backbone $atom:a8 $atom:a9
54 $bond:b9 @bond:../backbone $atom:a9 $atom:a10
55 $bond:b10 @bond:../backbone $atom:a10 $atom:a11
56 $bond:b11 @bond:../backbone $atom:a11 $atom:a12
57 $bond:b12 @bond:../backbone $atom:a12 $atom:a13
58 $bond:b13 @bond:../backbone $atom:a13 $atom:a14
59 $bond:b14 @bond:../backbone $atom:a14 $atom:a15
60 $bond:b15 @bond:../backbone $atom:a15 $atom:a16
61 }
62
63 } # A16
64
65
66 T3 { # T3 is a "turn" region consisting of 3 beads
67
68 # AtomID MoleculeID AtomType Charge X Y Z
69
70 write('Data Atoms') {
71 $atom:a1 $mol:... @atom:../tN 0.0 -4.8 0.0 0.0
72 $atom:a2 $mol:... @atom:../tN 0.0 0.0 3.3 -1.44
73 $atom:a3 $mol:... @atom:../tN 0.0 4.8 0.0 0.0
74 }
75
76 write('Data Bonds') {
77 $bond:b1 @bond:../backbone $atom:a1 $atom:a2
78 $bond:b2 @bond:../backbone $atom:a2 $atom:a3
79 }
80
81 } # T3
82
83
84 # ----- Now build a larger molecule using A16 and T3 -------
85
86 # Create a 4-Helix bundle.
87 # In this version, the hydrophobic beads are poing outward.
88 # I oriented them this way because I want to place this protein in a membrane.
89 # (There is another file in this directory containing alternate version
90 # of this same molecule with the hydrophobic beads pointing inward.)
91
92 4HelixInsideOut {
93
94 create_var { $mol } # <--optional: make all atoms share the same molecule ID
95
96 helix1 = new A16.rot(-225, 0,0,1).move(-5.70,-5.70,-32.4)
97 helix2 = new A16.rot(-135, 0,0,1).move( 5.70,-5.70,-28.8)
98 helix3 = new A16.rot( -45, 0,0,1).move( 5.70, 5.70,-25.2)
99 helix4 = new A16.rot( 45, 0,0,1).move(-5.70, 5.70,-21.6)
100
101 turn1 = new T3.rot(180,1,0,0).rot(-20,0,1,0).rot( 10,0,0,1).move(0.78,-4.2, 27.9)
102 turn2 = new T3.rot(-10,1,0,0).rot( 20,0,1,0).rot(-70,0,0,1).move(4.55, 2.4,-33.0)
103 turn3 = new T3.rot(180,1,0,0).rot(-20,0,1,0).rot(190,0,0,1).move(-0.78,4.2, 34.2)
104
105 write('Data Bonds') {
106 $bond:turn1a @bond:../backbone $atom:turn1/a1 $atom:helix1/a16
107 $bond:turn1b @bond:../backbone $atom:turn1/a3 $atom:helix2/a16
108 $bond:turn2a @bond:../backbone $atom:turn2/a1 $atom:helix3/a1
109 $bond:turn2b @bond:../backbone $atom:turn2/a3 $atom:helix2/a1
110 $bond:turn3a @bond:../backbone $atom:turn3/a1 $atom:helix3/a16
111 $bond:turn3b @bond:../backbone $atom:turn3/a3 $atom:helix4/a16
112 }
113
114 } # 4HelixInsideOut
115
116
117 # -------- Minor coordinates adjustment: -----------
118
119 # Those coordinates in the commands above are a little too large.
120 # To make it easier to type them in, I was using sigma=6.0 Angstroms.
121 # Instead, here I'll try using sigma=4.8 Angstroms. 4.8/6 = 0.8)
122
123 4HelixInsideOut.scale(0.8)
124
125 # Note: "scale()" only effects the initial coordinates of
126 # the molecule, not the force field parameters.
127 # (If you plan to minimize the molecule, you don't need to
128 # be so careful about the initial coordinates. In that case,
129 # you don't have worry about "scale()". Feel free to remove.)
130
131
132
133 # -------------- Force-Field Parameters ------------
134
135 # Units and force-field styles for this protein model
136 # (These can be overridden later.)
137
138 write_once("In Init") {
139 units lj #(temperature should be specified in energy units)
140 atom_style full
141 bond_style hybrid harmonic
142 angle_style hybrid harmonic
143 dihedral_style hybrid fourier
144 pair_style hybrid lj/charmm/coul/charmm/inter es4k4l maxmax 21.0 24.0
145 pair_modify mix arithmetic
146 special_bonds lj 0.0 0.0 1.0 #(turn on "1-4" interactions)
147 }
148
149 # --- Distance Units ---
150 # In this version of the model, sigma (the bond-length
151 # and particle diameter) is rounded to 4.8 Angstroms.
152 #
153 # --- Energy & Temperature Units ---
154 # In this protein model, "epsilon" represents the free energy
155 # bonus for bringing two hydrophobic amino acids together.
156 # Here I choose to set epsilon to 1.806551818181818 kcal/mole.
157 # This value was chosen so that a temperature of 345 Kelvin lies at
158 # 0.33 epsilon, which is the unfolding temperature of the marginally stable
159 # "ASF1" protein model from the Bellesia et al 2010 paper.
160 # I chose to make this protein stable at 345 degrees instead of 300 degrees
161 # in order to compensate for needing to run the simulations at higher
162 # temperatures than normal. At 300L, the lipid model we are using
163 # is prone to be trapped in the "gel" phase at 300K, when in a vesicle.
164 # This choice insures that both the "ASF1" model from that paper,
165 # as well as the much more stable "AUF2" protein we use here (which
166 # unfolds at 0.42*eps) should definitely remain stable at 345 degrees Kelvin,
167 # in the bulk at least. (However it's not clear that these energy
168 # parameters will work well for a protein in membrane. Perhaps I'll
169 # run some tests and fine tune these parameters for this scenario.)
170
171
172 # 2-body (non-bonded) interactions:
173 #
174 # Uij(r) = 4*eps_ij * (K*(sig_ij/r)^12 + L*(sig_ij/r)^6)
175 #
176 # i j pairstylename eps sig K L
177 #
178 write_once("In Settings") {
179 pair_coeff @atom:sH @atom:sH lj/charmm/coul/charmm/inter 2.07753457 4.8 1 -1
180 pair_coeff @atom:sL @atom:sL lj/charmm/coul/charmm/inter 2.07753457 4.8 1 0
181 pair_coeff @atom:tN @atom:tN lj/charmm/coul/charmm/inter 2.07753457 4.8 1 0
182 }
183
184 # The exact value of the bond_coeff does not matter too much as long as
185 # it is "stiff enough". Here I use a softer bond spring than the one
186 # used in the paper so that I can increase the time step.
187 # I also use a relatively soft spring to constrain the bond angles.
188
189 # bond_coeff bondType bondstylename k r0
190
191 write_once("In Settings") {
192 bond_coeff @bond:1beadProtSci2010/backbone harmonic 11.5 4.8
193 }
194
195
196 # angleType atomtypes1 2 3 bondtypes1 2
197
198 write_once("Data Angles By Type") {
199 @angle:backbone @atom:* @atom:* @atom:* @bond:* @bond:*
200 }
201
202 # angle_coeff angleType anglestylename k theta0
203 write_once("In Settings") {
204 angle_coeff @angle:backbone harmonic 115.0 105.0
205 }
206
207
208 # dihedralType atomtypes1 2 3 4 bondtypes1 2 3
209
210 write_once("Data Dihedrals By Type") {
211 # For a chain of sH and sL atoms, use the @dihedral:delta65_0
212 # parameters. (This corresponds to the "AUF2" model from the
213 # Bellesia et. al 2010 paper.)
214
215 @dihedral:delta65_0 @atom:s* @atom:s* @atom:s* @atom:s* * * *
216
217 # If "tN" (turn) atoms are present, use the @dihedral:turn parameters
218
219 @dihedral:turn @atom:tN @atom:* @atom:* @atom:* * * *
220 }
221
222 write_once("In Settings") {
223 dihedral_coeff @dihedral:delta60_0 fourier 2 2.49304 3 0 2.49304 1 -60.0
224 dihedral_coeff @dihedral:delta65_0 fourier 2 2.49304 3 0 2.49304 1 -65.0
225 dihedral_coeff @dihedral:turn fourier 1 0.41551 3 0
226 # Note: 2.49304=1.2*epsilon and 0.41551=0.2*epsilon.
227 }
228
229
230 # --- Mass Units ---
231 # masses were chosen so that a verlet timestep of 1.0 is numerically stable
232 write_once("Data Masses") {
233 @atom:1beadProtSci2010/sH 3000.0
234 @atom:1beadProtSci2010/sL 3000.0
235 @atom:1beadProtSci2010/tN 3000.0
236 }
237
238 } # 1beadProtSci2010 (namespace)
239