Debian Codegraph @

mplex/INSTRUCT

raw
1 //////////////////////////////////////////////////////////////////////////
2 // //
3 // INSTRUCTIONS FOR MPLEX - THE MPEG1/SYSTEMS MULTIPLEXER //
4 // //
5 //////////////////////////////////////////////////////////////////////////
6
7
8 Please note that I do not have a comprehensive instruction manual for this
9 release. I suggest you try the program out with some default values and
10 learn something more about ISO/IEC 11172-1 (aka MPEG1/Systems).
11
12 For those of you that can read *German*, you can download a postscript
13 paper discussing implementation and problems of this software, with
14 introductions to MPEG1/Audio, MPEG1/Video and MPEG1/Systems.
15 You should find the paper with the same distribution you got this
16 program from.
17
18 If not, you should find the postscript version of this 40-page paper
19 on
20
21 ftp.informatik.tu-muenchen.de in /pub/comp/graphics/mpeg/mplex
22
23 (121822 bytes, Jun 30 , 1994 , mpeg_systems_paper_0.99.ps.gz)
24
25 If you have any questions you cannot figure out by running the
26 program, feel free to ask me.
27
28 --------------------------------------------------------------------------
29
30 One more thing that might save me many emails:
31
32 when asked about the startup packet delay, try something like
33 half the video buffer size divided by your sector size. Say you
34 have a 40 kByte video buffer and a 2324 Byte Sector size, then
35 a startup delay of 8 sectors will work just fine.
36
37 What does the above parameter mean?
38
39 Normally, the Decoding/Presentation Time Stamp of the first access
40 unit is set to the clock value that will happen exactly after the last
41 packet containig data from this first unit arrives into the system
42 target decoder. This works fine if the video/audio streams are of
43 *very perfectly constant* or the packet size are *very* small
44 (ideally: the size of one access unit, that would mean variable
45 packet length).
46 Anyway: this parameter allows you to say that the System Target
47 Decoder should start decoding the first access unit after he
48 gets (startup_packet_delay + size_of_first_access_units[av])
49 packets of data.
50 This guarantees that the buffers are conveniently filled up.
51 Note that both the video stream offset and audio stream offset (ms)
52 add up even more bytes to this startup delay, but you can
53 tell conveniently that audio should start so many ms after video,
54 for example.
55
56 Sorry for no further doc, enjoy multiplexing A/V :)
57
58 Christoph.
59
60 [email protected]
61 +---------------------------------------+--------------------------------+
62 | http://www.informatik.tu-muenchen.de/ | Christoph Moar |
63 | cgi-bin/nph-gateway/hphalle6/~moar/ | Kaulbachstr.29a |
64 | index.html | 80539 Munich |
65 | email:[email protected] | voice: ++49 - 89 - 23862874 |
66 +---------------------------------------+--------------------------------+
67