Debian Codegraph @

ports/stm32/usbhost/Core/Src/usbh_conf_template.c

raw
1 /**
2 ******************************************************************************
3 * @file usb_bsp.c
4 * @author MCD Application Team
5 * @version V3.0.0
6 * @date 18-February-2014
7 * @brief This file implements the board support package for the USB host library
8 ******************************************************************************
9 * @attention
10 *
11 * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
12 *
13 * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
14 * You may not use this file except in compliance with the License.
15 * You may obtain a copy of the License at:
16 *
17 * http://www.st.com/software_license_agreement_liberty_v2
18 *
19 * Unless required by applicable law or agreed to in writing, software
20 * distributed under the License is distributed on an "AS IS" BASIS,
21 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
22 * See the License for the specific language governing permissions and
23 * limitations under the License.
24 *
25 ******************************************************************************
26 */
27
28 /* Includes ------------------------------------------------------------------*/
29 #include "usbh_core.h"
30
31 /**
32 * @brief USBH_LL_Init
33 * Initialize the Low Level portion of the Host driver.
34 * @param phost: Host handle
35 * @retval USBH Status
36 */
37 USBH_StatusTypeDef USBH_LL_Init (USBH_HandleTypeDef *phost)
38 {
39
40 return USBH_OK;
41 }
42
43 /**
44 * @brief USBH_LL_DeInit
45 * De-Initialize the Low Level portion of the Host driver.
46 * @param phost: Host handle
47 * @retval USBH Status
48 */
49 USBH_StatusTypeDef USBH_LL_DeInit (USBH_HandleTypeDef *phost)
50 {
51
52 return USBH_OK;
53 }
54
55 /**
56 * @brief USBH_LL_Start
57 * Start the Low Level portion of the Host driver.
58 * @param phost: Host handle
59 * @retval USBH Status
60 */
61 USBH_StatusTypeDef USBH_LL_Start(USBH_HandleTypeDef *phost)
62 {
63
64 return USBH_OK;
65 }
66
67 /**
68 * @brief USBH_LL_Stop
69 * Stop the Low Level portion of the Host driver.
70 * @param phost: Host handle
71 * @retval USBH Status
72 */
73 USBH_StatusTypeDef USBH_LL_Stop (USBH_HandleTypeDef *phost)
74 {
75
76 return USBH_OK;
77 }
78
79 /**
80 * @brief USBH_LL_GetSpeed
81 * Return the USB Host Speed from the Low Level Driver.
82 * @param phost: Host handle
83 * @retval USBH Speeds
84 */
85 USBH_SpeedTypeDef USBH_LL_GetSpeed (USBH_HandleTypeDef *phost)
86 {
87 USBH_SpeedTypeDef speed = 0;
88
89
90 return speed;
91 }
92
93 /**
94 * @brief USBH_LL_ResetPort
95 * Reset the Host Port of the Low Level Driver.
96 * @param phost: Host handle
97 * @retval USBH Status
98 */
99 USBH_StatusTypeDef USBH_LL_ResetPort (USBH_HandleTypeDef *phost)
100 {
101
102 return USBH_OK;
103 }
104
105 /**
106 * @brief USBH_LL_GetLastXferSize
107 * Return the last transfered packet size.
108 * @param phost: Host handle
109 * @param pipe: Pipe index
110 * @retval Packet Size
111 */
112 uint32_t USBH_LL_GetLastXferSize (USBH_HandleTypeDef *phost, uint8_t pipe)
113 {
114
115 }
116
117 /**
118 * @brief USBH_LL_OpenPipe
119 * Open a pipe of the Low Level Driver.
120 * @param phost: Host handle
121 * @param pipe_num: Pipe index
122 * @param epnum: Endpoint Number
123 * @param dev_address: Device USB address
124 * @param speed: Device Speed
125 * @param ep_type: Endpoint Type
126 * @param mps: Endpoint Max Packet Size
127 * @retval USBH Status
128 */
129 USBH_StatusTypeDef USBH_LL_OpenPipe (USBH_HandleTypeDef *phost,
130 uint8_t pipe_num,
131 uint8_t epnum,
132 uint8_t dev_address,
133 uint8_t speed,
134 uint8_t ep_type,
135 uint16_t mps)
136 {
137
138 return USBH_OK;
139 }
140
141 /**
142 * @brief USBH_LL_ClosePipe
143 * Close a pipe of the Low Level Driver.
144 * @param phost: Host handle
145 * @param pipe_num: Pipe index
146 * @retval USBH Status
147 */
148 USBH_StatusTypeDef USBH_LL_ClosePipe (USBH_HandleTypeDef *phost, uint8_t pipe)
149 {
150
151 }
152 /**
153 * @brief USBH_LL_SubmitURB
154 * Submit a new URB to the low level driver.
155 * @param phost: Host handle
156 * @param pipe: Pipe index
157 * This parameter can be a value from 1 to 15
158 * @param direction : Channel number
159 * This parameter can be one of the these values:
160 * 0 : Output
161 * 1 : Input
162 * @param ep_type : Endpoint Type
163 * This parameter can be one of the these values:
164 * @arg EP_TYPE_CTRL: Control type
165 * @arg EP_TYPE_ISOC: Isochrounous type
166 * @arg EP_TYPE_BULK: Bulk type
167 * @arg EP_TYPE_INTR: Interrupt type
168 * @param token : Endpoint Type
169 * This parameter can be one of the these values:
170 * @arg 0: PID_SETUP
171 * @arg 1: PID_DATA
172 * @param pbuff : pointer to URB data
173 * @param length : Length of URB data
174 * @param do_ping : activate do ping protocol (for high speed only)
175 * This parameter can be one of the these values:
176 * 0 : do ping inactive
177 * 1 : do ping active
178 * @retval Status
179 */
180
181 USBH_StatusTypeDef USBH_LL_SubmitURB (USBH_HandleTypeDef *phost,
182 uint8_t pipe,
183 uint8_t direction ,
184 uint8_t ep_type,
185 uint8_t token,
186 uint8_t* pbuff,
187 uint16_t length,
188 uint8_t do_ping )
189 {
190
191 return USBH_OK;
192 }
193
194 /**
195 * @brief USBH_LL_GetURBState
196 * Get a URB state from the low level driver.
197 * @param phost: Host handle
198 * @param pipe: Pipe index
199 * This parameter can be a value from 1 to 15
200 * @retval URB state
201 * This parameter can be one of the these values:
202 * @arg URB_IDLE
203 * @arg URB_DONE
204 * @arg URB_NOTREADY
205 * @arg URB_NYET
206 * @arg URB_ERROR
207 * @arg URB_STALL
208 */
209 USBH_URBStateTypeDef USBH_LL_GetURBState (USBH_HandleTypeDef *phost, uint8_t pipe)
210 {
211
212 }
213
214 /**
215 * @brief USBH_LL_DriverVBUS
216 * Drive VBUS.
217 * @param phost: Host handle
218 * @param state : VBUS state
219 * This parameter can be one of the these values:
220 * 0 : VBUS Active
221 * 1 : VBUS Inactive
222 * @retval Status
223 */
224
225 USBH_StatusTypeDef USBH_LL_DriverVBUS (USBH_HandleTypeDef *phost, uint8_t state)
226 {
227
228 return USBH_OK;
229 }
230
231 /**
232 * @brief USBH_LL_SetToggle
233 * Set toggle for a pipe.
234 * @param phost: Host handle
235 * @param pipe: Pipe index
236 * @param pipe_num: Pipe index
237 * @param toggle: toggle (0/1)
238 * @retval Status
239 */
240 USBH_StatusTypeDef USBH_LL_SetToggle (USBH_HandleTypeDef *phost, uint8_t pipe, uint8_t toggle)
241 {
242
243 return USBH_OK;
244 }
245
246 /**
247 * @brief USBH_LL_GetToggle
248 * Return the current toggle of a pipe.
249 * @param phost: Host handle
250 * @param pipe: Pipe index
251 * @retval toggle (0/1)
252 */
253 uint8_t USBH_LL_GetToggle (USBH_HandleTypeDef *phost, uint8_t pipe)
254 {
255 uint8_t toggle = 0;
256
257
258 return toggle;
259 }
260 /**
261 * @brief USBH_Delay
262 * Delay routine for the USB Host Library
263 * @param Delay: Delay in ms
264 * @retval None
265 */
266 void USBH_Delay (uint32_t Delay)
267 {
268
269 }
270 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/