Debian Codegraph @

ports/stm32/boards/VCC_GND_F407VE/mpconfigboard.h

raw
1 /* This file is part of the MicroPython project, http://micropython.org/
2 * MIT License; Copyright (c) 2021 Damien P. George
3 */
4
5 // STM32F407VET6 Mini by VCC-GND Studio
6 // http://vcc-gnd.com/
7 // https://item.taobao.com/item.htm?ft=t&id=523361737493
8 // https://www.aliexpress.com/wholesale?SearchText=STM32F407VET6+Mini
9
10 // DFU mode can be accessed by switching BOOT0 DIP ON (towards USB)
11
12 #define MICROPY_HW_BOARD_NAME "VCC-GND STM32F407VE"
13 #define MICROPY_HW_MCU_NAME "STM32F407VE"
14 #define MICROPY_HW_FLASH_FS_LABEL "VCCGNDF407VE"
15
16 // 1 = use internal flash (512 KByte)
17 // 0 = use external SPI flash
18 #define MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE (1)
19
20 #define MICROPY_HW_HAS_FLASH (1)
21 #define MICROPY_HW_ENABLE_RNG (1)
22 #define MICROPY_HW_ENABLE_RTC (1)
23 #define MICROPY_HW_ENABLE_DAC (1)
24 #define MICROPY_HW_ENABLE_USB (1)
25 #define MICROPY_HW_ENABLE_SDCARD (1)
26
27 // HSE is 25MHz
28 #define MICROPY_HW_CLK_PLLM (25) // divide external clock by this to get 1MHz
29 #define MICROPY_HW_CLK_PLLN (336) // PLL clock in MHz
30 #define MICROPY_HW_CLK_PLLP (RCC_PLLP_DIV2) // divide PLL clock by this to get core clock
31 #define MICROPY_HW_CLK_PLLQ (7) // divide core clock by this to get 48MHz
32
33 // The board has a 32kHz crystal for the RTC
34 #define MICROPY_HW_RTC_USE_LSE (1)
35 #define MICROPY_HW_RTC_USE_US (0)
36 // #define MICROPY_HW_RTC_USE_CALOUT (1) // turn on/off PC13 512Hz output
37
38 // USART1
39 #define MICROPY_HW_UART1_TX (pin_A9) // PA9,PB6
40 #define MICROPY_HW_UART1_RX (pin_A10) // PA10,PB7
41
42 // USART2
43 #define MICROPY_HW_UART2_TX (pin_A2) // PA2,PD5
44 #define MICROPY_HW_UART2_RX (pin_A3) // PA3,PD6
45 #define MICROPY_HW_UART2_RTS (pin_A1) // PA1,PD4
46 #define MICROPY_HW_UART2_CTS (pin_A0) // PA0,PD3
47
48 // USART3
49 #define MICROPY_HW_UART3_TX (pin_D8) // PB10,PC10,PD8
50 #define MICROPY_HW_UART3_RX (pin_D9) // PB11,PC11,PD9
51 #define MICROPY_HW_UART3_RTS (pin_D12) // PB14,PD12
52 #define MICROPY_HW_UART3_CTS (pin_D11) // PB13,PD11
53
54 // UART4
55 #define MICROPY_HW_UART4_TX (pin_A0) // PA0,PC10
56 #define MICROPY_HW_UART4_RX (pin_A1) // PA1,PC11
57
58 // UART5
59 #define MICROPY_HW_UART5_TX (pin_C12) // PC12
60 #define MICROPY_HW_UART5_RX (pin_D2) // PD2
61
62 // USART6
63 #define MICROPY_HW_UART6_TX (pin_C6) // PC6,PG14
64 #define MICROPY_HW_UART6_RX (pin_C7) // PC7,PG9
65
66 // I2C buses
67 #define MICROPY_HW_I2C1_SCL (pin_B6) // PB8,PB6
68 #define MICROPY_HW_I2C1_SDA (pin_B7) // PB9,PB7
69 #define MICROPY_HW_I2C2_SCL (pin_B10) // PB10
70 #define MICROPY_HW_I2C2_SDA (pin_B11) // PB11
71 #define MICROPY_HW_I2C3_SCL (pin_A8) // PA8
72 #define MICROPY_HW_I2C3_SDA (pin_C9) // PC9
73 // AT24C08 EEPROM on I2C1 0x50-0x53
74
75 // I2S buses
76 // I2S2_CK PB13
77 // I2S2_MCK PC6
78 // I2S2_SD PB15
79 // I2S2_WS PB12
80 // I2S3_CK PB3
81 // I2S3_MCK PC7
82 // I2S3_SD PB5
83 // I2S3_WS PA15
84
85 // SPI buses
86 #define MICROPY_HW_SPI1_NSS (pin_A4) // PA4
87 #define MICROPY_HW_SPI1_SCK (pin_A5) // PA5,PB3
88 #define MICROPY_HW_SPI1_MISO (pin_A6) // PA6,PB4
89 #define MICROPY_HW_SPI1_MOSI (pin_A7) // PA7,PB5
90
91 #define MICROPY_HW_SPI2_NSS (pin_B12) // PB12
92 #define MICROPY_HW_SPI2_SCK (pin_B13) // PB13
93 #define MICROPY_HW_SPI2_MISO (pin_B14) // PB14
94 #define MICROPY_HW_SPI2_MOSI (pin_B15) // PB15
95
96 #define MICROPY_HW_SPI3_NSS (pin_A15) // PA15
97 #define MICROPY_HW_SPI3_SCK (pin_B3) // PB3
98 #define MICROPY_HW_SPI3_MISO (pin_B4) // PB4
99 #define MICROPY_HW_SPI3_MOSI (pin_B5) // PB5
100
101 // CAN buses
102 #define MICROPY_HW_CAN1_TX (pin_B9) // PB9,PD1,PA12
103 #define MICROPY_HW_CAN1_RX (pin_B8) // PB8,PD0,PA11
104 #define MICROPY_HW_CAN2_TX (pin_B13) // PB13
105 #define MICROPY_HW_CAN2_RX (pin_B12) // PB12
106
107 // DAC
108 // DAC_OUT1 PA4
109 // DAC_OUT2 PA5
110
111 // LEDs
112 #define MICROPY_HW_LED1 (pin_B9) // blue
113 #define MICROPY_HW_LED_ON(pin) (mp_hal_pin_low(pin))
114 #define MICROPY_HW_LED_OFF(pin) (mp_hal_pin_high(pin))
115
116 // If using external SPI flash
117 #if !MICROPY_HW_ENABLE_INTERNAL_FLASH_STORAGE
118
119 // The board does not have onboard SPI flash. You need to add an external one.
120 #define MICROPY_HW_SPIFLASH_SIZE_BITS (4 * 1024 * 1024) // W25X40 - 4 Mbit (512 KByte)
121 // #define MICROPY_HW_SPIFLASH_SIZE_BITS (32 * 1024 * 1024) // W25Q32 - 32 Mbit (4 MByte)
122 // #define MICROPY_HW_SPIFLASH_SIZE_BITS (64 * 1024 * 1024) // W25Q64 - 64 Mbit (8 MByte)
123 // #define MICROPY_HW_SPIFLASH_SIZE_BITS (128 * 1024 * 1024) // W25Q128 - 128 Mbit (16 MByte)
124
125 #define MICROPY_HW_SPIFLASH_CS (pin_A4) // also in board_init.c
126 #define MICROPY_HW_SPIFLASH_SCK (pin_A5)
127 #define MICROPY_HW_SPIFLASH_MISO (pin_A6)
128 #define MICROPY_HW_SPIFLASH_MOSI (pin_A7)
129
130 #define MICROPY_BOARD_EARLY_INIT VCC_GND_F407VE_board_early_init
131 void VCC_GND_F407VE_board_early_init(void);
132
133 extern const struct _mp_spiflash_config_t spiflash_config;
134 extern struct _spi_bdev_t spi_bdev;
135 #define MICROPY_HW_SPIFLASH_ENABLE_CACHE (1)
136 #define MICROPY_HW_BDEV_SPIFLASH (&spi_bdev)
137 #define MICROPY_HW_BDEV_SPIFLASH_CONFIG (&spiflash_config)
138 #define MICROPY_HW_BDEV_SPIFLASH_SIZE_BYTES (MICROPY_HW_SPIFLASH_SIZE_BITS / 8)
139
140 #endif
141
142 // SD card detect switch
143 #define MICROPY_HW_SDCARD_DETECT_PIN (pin_A8)
144 #define MICROPY_HW_SDCARD_DETECT_PULL (GPIO_PULLUP)
145 #define MICROPY_HW_SDCARD_DETECT_PRESENT (GPIO_PIN_RESET)
146 // 1 - PC10 - DAT2/RES
147 // 2 - PC11 - CD/DAT3/CS
148 // 3 - PD2 - CMD/DI
149 // 4 - VCC - VDD
150 // 5 - PC12 - CLK/SCLK
151 // 6 - GND - VSS
152 // 7 - PC8 - DAT0/D0
153 // 8 - PC9 - DAT1/RES
154 // 9 SW2 - GND
155 // 10 SW1 - PA8
156
157 // USB config
158 #define MICROPY_HW_USB_FS (1)
159 // #define MICROPY_HW_USB_VBUS_DETECT_PIN (pin_A9)
160 // #define MICROPY_HW_USB_OTG_ID_PIN (pin_A10)