Debian Codegraph @

ports/stm32/boards/STM32F769DISC/mpconfigboard.mk

raw
1 # By default the filesystem is in external QSPI flash. But by setting the
2 # following option this board puts some code into external flash set in XIP mode.
3 # USE_MBOOT must be enabled; see f769_qspi.ld for code that goes in QSPI flash
4 USE_QSPI_XIP ?= 0
5 CFLAGS += -DUSE_QSPI_XIP=$(USE_QSPI_XIP)
6
7 # MCU settings
8 MCU_SERIES = f7
9 CMSIS_MCU = STM32F769xx
10 MICROPY_FLOAT_IMPL = double
11 AF_FILE = boards/stm32f767_af.csv
12
13 ifeq ($(USE_MBOOT),1)
14 ifeq ($(USE_QSPI_XIP),1)
15
16 # When using Mboot and QSPI-XIP the text is split between internal and external
17 # QSPI flash, and the filesystem is in internal flash between the bootloader and
18 # the main program text.
19 LD_FILES = boards/STM32F769DISC/f769_qspi.ld
20 TEXT0_ADDR = 0x08020000
21 TEXT1_ADDR = 0x90000000
22 TEXT0_SECTIONS = .isr_vector .text .data .ARM
23 TEXT1_SECTIONS = .text_qspi
24
25 else
26
27 # When using Mboot but not QSPI-XIP all the text goes together after the bootloader
28 # (at same location as when QSPI-XIP is enabled so the same Mboot can be used for
29 # either configuration) and the filesystem is in external flash.
30 LD_FILES = boards/stm32f769.ld boards/common_blifs.ld
31 TEXT0_ADDR = 0x08020000
32
33 endif
34 else
35
36 # When not using Mboot (and so no ability to load text into QSPI) all the text goes
37 # together at the start of internal flash, and the filesystem is in external flash.
38 LD_FILES = boards/stm32f769.ld boards/common_basic.ld
39 TEXT0_ADDR = 0x08000000
40
41 endif
42
43 # MicroPython settings
44 MICROPY_PY_LWIP = 1
45 MICROPY_PY_SSL = 1
46 MICROPY_SSL_MBEDTLS = 1
47
48 FROZEN_MANIFEST = $(BOARD_DIR)/manifest.py