Debian Codegraph @

ports/stm32/boards/PYBD_SF2/board_init.c

raw
1 /*
2 * This file is part of the MicroPython project, http://micropython.org/
3 *
4 * The MIT License (MIT)
5 *
6 * Copyright (c) 2018-2019 Damien P. George
7 *
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
14 *
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
17 *
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
25 */
26
27 #include <string.h>
28 #include "py/mphal.h"
29 #include "storage.h"
30
31 #if defined(STM32F722xx) || defined(STM32F723xx) || defined(STM32F732xx) || defined(STM32F733xx)
32 #define OTP_ADDR (0x1ff079e0)
33 #else
34 #define OTP_ADDR (0x1ff0f3c0)
35 #endif
36 #define OTP ((pyb_otp_t *)OTP_ADDR)
37
38 typedef struct _pyb_otp_t {
39 uint16_t series;
40 uint16_t rev;
41 uint8_t mac[6];
42 } pyb_otp_t;
43
44 void mboot_board_early_init(void) {
45 // Enable 500mA on WBUS-DIP28
46 mp_hal_pin_config(pyb_pin_W23, MP_HAL_PIN_MODE_INPUT, MP_HAL_PIN_PULL_UP, 0);
47
48 #if defined(MBOOT_SDCARD_ADDR)
49 // Configure EN_3V3 as an output pin so that SD card can be used
50 mp_hal_pin_config(pyb_pin_EN_3V3, MP_HAL_PIN_MODE_OUTPUT, MP_HAL_PIN_PULL_NONE, 0);
51 #endif
52 }
53
54 void board_early_init(void) {
55 // Configure EN_3V3 as an output pin, but keep it turned off
56 mp_hal_pin_config(pyb_pin_EN_3V3, MP_HAL_PIN_MODE_OUTPUT, MP_HAL_PIN_PULL_NONE, 0);
57
58 // Explicitly init SPI2 because it's not enabled as a block device
59 spi_bdev_ioctl(&spi_bdev2, BDEV_IOCTL_INIT, (uint32_t)&spiflash2_config);
60 }
61
62 #if !BUILDING_MBOOT
63
64 #include "boardctrl.h"
65 #include "qspi.h"
66
67 int board_run_boot_py(boardctrl_state_t *state) {
68 // Due to errata 2.4.3, restart memory-mapped mode to deactivate the CS line and save power.
69 qspi_memory_map_restart();
70
71 return boardctrl_run_boot_py(state);
72 }
73
74 void board_sleep(int value) {
75 mp_spiflash_deepsleep(&spi_bdev.spiflash, value);
76 mp_spiflash_deepsleep(&spi_bdev2.spiflash, value);
77 }
78
79 void mp_hal_get_mac(int idx, uint8_t buf[6]) {
80 // Check if OTP region has a valid MAC address, and use it if it does
81 if (OTP->series == 0x00d1 && OTP->mac[0] == 'H' && OTP->mac[1] == 'J' && OTP->mac[2] == '0') {
82 #if __GNUC__ >= 11
83 #pragma GCC diagnostic push
84 #pragma GCC diagnostic ignored "-Warray-bounds"
85 #pragma GCC diagnostic ignored "-Wstringop-overread"
86 #endif
87 memcpy(buf, OTP->mac, 6);
88 #if __GNUC__ >= 11
89 #pragma GCC diagnostic pop
90 #endif
91 buf[5] += idx;
92 return;
93 }
94
95 // Generate a random locally administered MAC address (LAA)
96 mp_hal_generate_laa_mac(idx, buf);
97 }
98
99 #endif