Debian Codegraph @

ports/stm32/boards/NETDUINO_PLUS_2/board_init.c

raw
1 #include STM32_HAL_H
2
3 void NETDUINO_PLUS_2_board_early_init(void) {
4
5 __HAL_RCC_GPIOB_CLK_ENABLE();
6
7 // Turn off the backlight. LCD_BL_CTRL = PK3
8 GPIO_InitTypeDef GPIO_InitStructure;
9 GPIO_InitStructure.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
10 GPIO_InitStructure.Mode = GPIO_MODE_OUTPUT_PP;
11 GPIO_InitStructure.Pull = GPIO_PULLUP;
12
13 #if MICROPY_HW_ENABLE_SDCARD
14 // Turn on the power enable for the sdcard (PB1)
15 GPIO_InitStructure.Pin = GPIO_PIN_1;
16 HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
17 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_1, GPIO_PIN_SET);
18 #endif
19
20 // Turn on the power for the 5V on the expansion header (PB2)
21 GPIO_InitStructure.Pin = GPIO_PIN_2;
22 HAL_GPIO_Init(GPIOB, &GPIO_InitStructure);
23 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_2, GPIO_PIN_SET);
24 }