Debian Codegraph @

ports/stm32/boards/LEGO_HUB_NO6/cc2564.c

raw
1 /*
2 * This file is part of the MicroPython project, http://micropython.org/
3 *
4 * The MIT License (MIT)
5 *
6 * Copyright (c) 2021 Damien P. George
7 *
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
14 *
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
17 *
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
25 */
26
27 #include <stdio.h>
28
29 #include "py/runtime.h"
30 #include "py/mphal.h"
31 #include "timer.h"
32 #include "extmod/mpbthci.h"
33
34 #if !BUILDING_MBOOT
35
36 #define CC2564_PIN_CTS (pyb_pin_BT_CTS)
37 #define CC2564_PIN_RTS (pyb_pin_BT_RTS)
38 #define CC2564_PIN_BT_SLOWCLK (pyb_pin_BT_SLOWCLK)
39 #define CC2564_PIN_BT_ENABLE (pyb_pin_BT_ENABLE)
40
41 // slight difference between LEGO_HUB_NO6 and LEGO_HUB_NO7
42 #ifndef CC2564_TIMER_BT_SLOWCLOCK_TIM
43 #define CC2564_TIMER_BT_SLOWCLOCK_TIM 8
44 #define CC2564_TIMER_BT_SLOWCLOCK_TIM_CH 4
45 #endif
46
47 static void cc2564_wait_cts_low(mp_hal_pin_obj_t cts, uint32_t timeout_ms) {
48 for (int i = 0; i < timeout_ms; ++i) {
49 if (mp_hal_pin_read(cts) == 0) {
50 break;
51 }
52 mp_hal_delay_ms(1);
53 }
54 }
55
56 int mp_bluetooth_hci_controller_init(void) {
57 // Pull BTNSHUTD low to disable chip.
58 mp_hal_pin_output(CC2564_PIN_BT_ENABLE);
59 mp_hal_pin_low(CC2564_PIN_BT_ENABLE);
60
61 // Output a 32768Hz signal on BTSLOWCLK.
62 // tim = pyb.Timer(TIM, freq=32768)
63 // tim_ch = tim.channel(TIM_CH, pyb.Timer.PWM, pin=btclk)
64 // tim_ch.pulse_width_percent(50)
65 mp_obj_t args[6] = { MP_OBJ_NEW_SMALL_INT(CC2564_TIMER_BT_SLOWCLOCK_TIM), MP_OBJ_NEW_QSTR(MP_QSTR_freq), MP_OBJ_NEW_SMALL_INT(32768), MP_OBJ_NULL };
66 mp_obj_t tim = MP_OBJ_TYPE_GET_SLOT(&pyb_timer_type, make_new)(&pyb_timer_type, 1, 1, args);
67 mp_load_method(tim, MP_QSTR_channel, args);
68 args[2] = MP_OBJ_NEW_SMALL_INT(CC2564_TIMER_BT_SLOWCLOCK_TIM_CH);
69 args[3] = MP_OBJ_NEW_SMALL_INT(0); // CHANNEL_MODE_PWM_NORMAL
70 args[4] = MP_OBJ_NEW_QSTR(MP_QSTR_pin);
71 args[5] = (mp_obj_t)CC2564_PIN_BT_SLOWCLK;
72 mp_obj_t tim_ch = mp_call_method_n_kw(2, 1, args);
73 mp_load_method(tim_ch, MP_QSTR_pulse_width_percent, args);
74 args[2] = MP_OBJ_NEW_SMALL_INT(50);
75 mp_call_method_n_kw(1, 0, args);
76
77 // Pull BTNSHUTD high to enable chip and wait for CTS to go low to indicate ready.
78 mp_hal_pin_high(CC2564_PIN_BT_ENABLE);
79 cc2564_wait_cts_low(CC2564_PIN_CTS, 500);
80
81 return 0;
82 }
83
84 int mp_bluetooth_hci_controller_deinit(void) {
85 // Pull BTNSHUTD low to disable chip.
86 mp_hal_pin_low(CC2564_PIN_BT_ENABLE);
87
88 return 0;
89 }
90
91 #endif