ports/rp2/boards/WEACTSTUDIO/deploy.md
raw| 1 | ### Flashing via UF2 bootloader |
| 2 | |
| 3 | To get the board in bootloader mode ready for the firmware update, execute |
| 4 | `machine.bootloader()` at the MicroPython REPL. Alternatively, hold |
| 5 | down the BOOTSEL button while pressing reset (NRST). The uf2 file below |
| 6 | should then be copied to the USB mass storage device that appears. Once |
| 7 | programming of the new firmware is complete the device will automatically reset |
| 8 | and be ready for use. |