ports/rp2/boards/SIL_RP2040_SHIM/deploy.md
raw| 1 | ### Flashing via UF2 bootloader |
| 2 | |
| 3 | To get the board in bootloader mode ready for the firmware update, execute |
| 4 | `machine.bootloader()` at the MicroPython REPL. Alternatively, double press |
| 5 | the reset button SW1. The uf2 file below should then be copied to the USB mass |
| 6 | storage device that appears. Once programming of the new firmware is complete |
| 7 | the device will automatically reset and be ready for use. |