| 1 |
/* |
| 2 |
* The MIT License (MIT) |
| 3 |
* |
| 4 |
* Copyright (c) 2021,2022 Renesas Electronics Corporation |
| 5 |
* |
| 6 |
* Permission is hereby granted, free of charge, to any person obtaining a copy |
| 7 |
* of this software and associated documentation files (the "Software"), to deal |
| 8 |
* in the Software without restriction, including without limitation the rights |
| 9 |
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
| 10 |
* copies of the Software, and to permit persons to whom the Software is |
| 11 |
* furnished to do so, subject to the following conditions: |
| 12 |
* |
| 13 |
* The above copyright notice and this permission notice shall be included in |
| 14 |
* all copies or substantial portions of the Software. |
| 15 |
* |
| 16 |
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| 17 |
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| 18 |
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
| 19 |
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| 20 |
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
| 21 |
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
| 22 |
* THE SOFTWARE. |
| 23 |
*/ |
| 24 |
|
| 25 |
#include <stdio.h> |
| 26 |
#include <stdint.h> |
| 27 |
#include "hal_data.h" |
| 28 |
#include "ra_config.h" |
| 29 |
#include "ra_gpio.h" |
| 30 |
#include "ra_icu.h" |
| 31 |
#include "ra_int.h" |
| 32 |
#include "ra_timer.h" |
| 33 |
#include "ra_utils.h" |
| 34 |
#include "ra_i2c.h" |
| 35 |
|
| 36 |
#if !defined(RA_PRI_I2C) |
| 37 |
#define RA_PRI_I2C (8) |
| 38 |
#endif |
| 39 |
|
| 40 |
#if defined(__GNUC__) |
| 41 |
#pragma GCC diagnostic ignored "-Wunused-parameter" |
| 42 |
#pragma GCC diagnostic ignored "-Wconversion" |
| 43 |
#pragma GCC diagnostic ignored "-Wimplicit-function-declaration" |
| 44 |
#pragma GCC diagnostic ignored "-Wunused-variable" |
| 45 |
#endif |
| 46 |
|
| 47 |
extern volatile uint32_t uwTick; |
| 48 |
|
| 49 |
static const ra_af_pin_t scl_pins[] = { |
| 50 |
#if defined(RA4M1) |
| 51 |
|
| 52 |
{ AF_I2C, 0, P204 }, |
| 53 |
{ AF_I2C, 0, P400 }, |
| 54 |
{ AF_I2C, 0, P408 }, |
| 55 |
{ AF_I2C, 1, P100 }, |
| 56 |
{ AF_I2C, 1, P205 }, |
| 57 |
|
| 58 |
#elif defined(RA4W1) |
| 59 |
|
| 60 |
{ AF_I2C, 0, P204 }, |
| 61 |
{ AF_I2C, 1, P100 }, |
| 62 |
{ AF_I2C, 1, P205 }, |
| 63 |
|
| 64 |
#elif defined(RA6M1) |
| 65 |
|
| 66 |
{ AF_I2C, 0, P400 }, |
| 67 |
{ AF_I2C, 0, P408 }, |
| 68 |
{ AF_I2C, 1, P100 }, |
| 69 |
{ AF_I2C, 1, P205 }, |
| 70 |
|
| 71 |
#elif defined(RA6M2) || defined(RA6M3) |
| 72 |
|
| 73 |
{ AF_I2C, 0, P204 }, |
| 74 |
{ AF_I2C, 0, P400 }, |
| 75 |
{ AF_I2C, 0, P408 }, |
| 76 |
{ AF_I2C, 1, P100 }, |
| 77 |
{ AF_I2C, 1, P205 }, |
| 78 |
{ AF_I2C, 2, P512 }, |
| 79 |
|
| 80 |
#elif defined(RA6M5) |
| 81 |
|
| 82 |
{ AF_I2C, 0, P400 }, |
| 83 |
{ AF_I2C, 0, P408 }, |
| 84 |
{ AF_I2C, 1, P205 }, |
| 85 |
{ AF_I2C, 1, P512 }, |
| 86 |
{ AF_I2C, 2, P410 }, |
| 87 |
{ AF_I2C, 2, P415 }, |
| 88 |
|
| 89 |
#else |
| 90 |
#error "CMSIS MCU Series is not specified." |
| 91 |
#endif |
| 92 |
}; |
| 93 |
#define SCL_PINS_SIZE sizeof(scl_pins) / sizeof(ra_af_pin_t) |
| 94 |
|
| 95 |
static const ra_af_pin_t sda_pins[] = { |
| 96 |
#if defined(RA4M1) |
| 97 |
|
| 98 |
{ AF_I2C, 0, P401 }, |
| 99 |
{ AF_I2C, 0, P407 }, |
| 100 |
{ AF_I2C, 1, P101 }, |
| 101 |
{ AF_I2C, 1, P206 }, |
| 102 |
|
| 103 |
#elif defined(RA4W1) |
| 104 |
|
| 105 |
{ AF_I2C, 0, P407 }, |
| 106 |
{ AF_I2C, 1, P101 }, |
| 107 |
{ AF_I2C, 1, P206 }, |
| 108 |
|
| 109 |
#elif defined(RA6M1) |
| 110 |
|
| 111 |
{ AF_I2C, 0, P401 }, |
| 112 |
{ AF_I2C, 0, P407 }, |
| 113 |
{ AF_I2C, 1, P101 }, |
| 114 |
{ AF_I2C, 1, P206 }, |
| 115 |
|
| 116 |
#elif defined(RA6M2) || defined(RA6M3) |
| 117 |
|
| 118 |
{ AF_I2C, 0, P401 }, |
| 119 |
{ AF_I2C, 0, P407 }, |
| 120 |
{ AF_I2C, 1, P101 }, |
| 121 |
{ AF_I2C, 1, P206 }, |
| 122 |
{ AF_I2C, 2, P511 }, |
| 123 |
|
| 124 |
#elif defined(RA6M5) |
| 125 |
|
| 126 |
{ AF_I2C, 0, P401 }, |
| 127 |
{ AF_I2C, 0, P407 }, |
| 128 |
{ AF_I2C, 1, P206 }, |
| 129 |
{ AF_I2C, 1, P511 }, |
| 130 |
{ AF_I2C, 2, P409 }, |
| 131 |
{ AF_I2C, 2, P414 }, |
| 132 |
|
| 133 |
#else |
| 134 |
#error "CMSIS MCU Series is not specified." |
| 135 |
#endif |
| 136 |
}; |
| 137 |
#define SDA_PINS_SIZE sizeof(sda_pins) / sizeof(ra_af_pin_t) |
| 138 |
|
| 139 |
static const uint8_t ra_i2c_ch_to_rxirq[] = { |
| 140 |
#if defined(VECTOR_NUMBER_IIC0_RXI) |
| 141 |
VECTOR_NUMBER_IIC0_RXI, |
| 142 |
#else |
| 143 |
VECTOR_NUMBER_NONE, |
| 144 |
#endif |
| 145 |
#if defined(VECTOR_NUMBER_IIC1_RXI) |
| 146 |
VECTOR_NUMBER_IIC1_RXI, |
| 147 |
#else |
| 148 |
VECTOR_NUMBER_NONE, |
| 149 |
#endif |
| 150 |
#if defined(VECTOR_NUMBER_IIC2_RXI) |
| 151 |
VECTOR_NUMBER_IIC2_RXI, |
| 152 |
#else |
| 153 |
VECTOR_NUMBER_NONE, |
| 154 |
#endif |
| 155 |
}; |
| 156 |
static const uint8_t ra_i2c_ch_to_txirq[] = { |
| 157 |
#if defined(VECTOR_NUMBER_IIC0_TXI) |
| 158 |
VECTOR_NUMBER_IIC0_TXI, |
| 159 |
#else |
| 160 |
VECTOR_NUMBER_NONE, |
| 161 |
#endif |
| 162 |
#if defined(VECTOR_NUMBER_IIC1_TXI) |
| 163 |
VECTOR_NUMBER_IIC1_TXI, |
| 164 |
#else |
| 165 |
VECTOR_NUMBER_NONE, |
| 166 |
#endif |
| 167 |
#if defined(VECTOR_NUMBER_IIC2_TXI) |
| 168 |
VECTOR_NUMBER_IIC2_TXI, |
| 169 |
#else |
| 170 |
VECTOR_NUMBER_NONE, |
| 171 |
#endif |
| 172 |
}; |
| 173 |
static const uint8_t ra_i2c_ch_to_teirq[] = { |
| 174 |
#if defined(VECTOR_NUMBER_IIC0_TEI) |
| 175 |
VECTOR_NUMBER_IIC0_TEI, |
| 176 |
#else |
| 177 |
VECTOR_NUMBER_NONE, |
| 178 |
#endif |
| 179 |
#if defined(VECTOR_NUMBER_IIC1_TEI) |
| 180 |
VECTOR_NUMBER_IIC1_TEI, |
| 181 |
#else |
| 182 |
VECTOR_NUMBER_NONE, |
| 183 |
#endif |
| 184 |
#if defined(VECTOR_NUMBER_IIC2_TEI) |
| 185 |
VECTOR_NUMBER_IIC2_TEI, |
| 186 |
#else |
| 187 |
VECTOR_NUMBER_NONE, |
| 188 |
#endif |
| 189 |
}; |
| 190 |
static const uint8_t ra_i2c_ch_to_erirq[] = { |
| 191 |
#if defined(VECTOR_NUMBER_IIC0_ERI) |
| 192 |
VECTOR_NUMBER_IIC0_ERI, |
| 193 |
#else |
| 194 |
VECTOR_NUMBER_NONE, |
| 195 |
#endif |
| 196 |
#if defined(VECTOR_NUMBER_IIC1_ERI) |
| 197 |
VECTOR_NUMBER_IIC1_ERI, |
| 198 |
#else |
| 199 |
VECTOR_NUMBER_NONE, |
| 200 |
#endif |
| 201 |
#if defined(VECTOR_NUMBER_IIC2_ERI) |
| 202 |
VECTOR_NUMBER_IIC2_ERI, |
| 203 |
#else |
| 204 |
VECTOR_NUMBER_NONE, |
| 205 |
#endif |
| 206 |
}; |
| 207 |
|
| 208 |
static xaction_t *current_xaction; |
| 209 |
static xaction_unit_t *current_xaction_unit; |
| 210 |
static bool last_stop; |
| 211 |
static uint8_t pclk_div[8] = { |
| 212 |
1, 2, 4, 8, 16, 32, 64, 128 |
| 213 |
}; |
| 214 |
|
| 215 |
static uint32_t R_IIC0_Type_to_ch(R_IIC0_Type *i2c_inst) { |
| 216 |
if (i2c_inst == R_IIC2) { |
| 217 |
return 2; /* channel 2 */ |
| 218 |
} else if (i2c_inst == R_IIC1) { |
| 219 |
return 1; /* channel 1 */ |
| 220 |
} else { |
| 221 |
return 0; /* channel 0 */ |
| 222 |
} |
| 223 |
} |
| 224 |
|
| 225 |
static R_IIC0_Type *ch_to_R_IIC0_Type(uint32_t ch) { |
| 226 |
if (ch == 2) { |
| 227 |
return R_IIC2; |
| 228 |
} else if (ch == 1) { |
| 229 |
return R_IIC1; |
| 230 |
} else { |
| 231 |
return R_IIC0; |
| 232 |
} |
| 233 |
} |
| 234 |
|
| 235 |
bool ra_i2c_find_af_ch(uint32_t scl, uint32_t sda, uint8_t *ch) { |
| 236 |
bool find = false; |
| 237 |
uint8_t scl_ch; |
| 238 |
uint8_t sda_ch; |
| 239 |
find = ra_af_find_ch((ra_af_pin_t *)&scl_pins, SCL_PINS_SIZE, scl, &scl_ch); |
| 240 |
if (find) { |
| 241 |
find = ra_af_find_ch((ra_af_pin_t *)&sda_pins, SDA_PINS_SIZE, sda, &sda_ch); |
| 242 |
if (find) { |
| 243 |
find = (scl_ch == sda_ch); |
| 244 |
if (find) { |
| 245 |
*ch = scl_ch; |
| 246 |
} else { |
| 247 |
*ch = 0; |
| 248 |
} |
| 249 |
} |
| 250 |
} |
| 251 |
return find; |
| 252 |
} |
| 253 |
|
| 254 |
static void ra_i2c_module_start(R_IIC0_Type *i2c_inst) { |
| 255 |
if (i2c_inst == R_IIC0) { |
| 256 |
ra_mstpcrb_start(R_MSTP_MSTPCRB_MSTPB9_Msk); |
| 257 |
} else if (i2c_inst == R_IIC1) { |
| 258 |
ra_mstpcrb_start(R_MSTP_MSTPCRB_MSTPB8_Msk); |
| 259 |
} else if (i2c_inst == R_IIC2) { |
| 260 |
ra_mstpcrb_start(R_MSTP_MSTPCRB_MSTPB7_Msk); |
| 261 |
} |
| 262 |
} |
| 263 |
|
| 264 |
static void ra_i2c_module_stop(R_IIC0_Type *i2c_inst) { |
| 265 |
if (i2c_inst == R_IIC0) { |
| 266 |
ra_mstpcrb_stop(R_MSTP_MSTPCRB_MSTPB9_Msk); |
| 267 |
} else if (i2c_inst == R_IIC1) { |
| 268 |
ra_mstpcrb_stop(R_MSTP_MSTPCRB_MSTPB8_Msk); |
| 269 |
} else if (i2c_inst == R_IIC2) { |
| 270 |
ra_mstpcrb_stop(R_MSTP_MSTPCRB_MSTPB7_Msk); |
| 271 |
} |
| 272 |
} |
| 273 |
|
| 274 |
void ra_i2c_irq_enable(R_IIC0_Type *i2c_inst) { |
| 275 |
uint32_t ch = R_IIC0_Type_to_ch(i2c_inst); |
| 276 |
R_BSP_IrqEnable((IRQn_Type const)ra_i2c_ch_to_rxirq[ch]); |
| 277 |
R_BSP_IrqEnable((IRQn_Type const)ra_i2c_ch_to_txirq[ch]); |
| 278 |
R_BSP_IrqEnable((IRQn_Type const)ra_i2c_ch_to_teirq[ch]); |
| 279 |
R_BSP_IrqEnable((IRQn_Type const)ra_i2c_ch_to_erirq[ch]); |
| 280 |
} |
| 281 |
|
| 282 |
void ra_i2c_irq_disable(R_IIC0_Type *i2c_inst) { |
| 283 |
uint32_t ch = R_IIC0_Type_to_ch(i2c_inst); |
| 284 |
R_BSP_IrqDisable((IRQn_Type const)ra_i2c_ch_to_rxirq[ch]); |
| 285 |
R_BSP_IrqDisable((IRQn_Type const)ra_i2c_ch_to_txirq[ch]); |
| 286 |
R_BSP_IrqDisable((IRQn_Type const)ra_i2c_ch_to_teirq[ch]); |
| 287 |
R_BSP_IrqDisable((IRQn_Type const)ra_i2c_ch_to_erirq[ch]); |
| 288 |
} |
| 289 |
|
| 290 |
void ra_i2c_priority(R_IIC0_Type *i2c_inst, uint32_t ipl) { |
| 291 |
uint32_t ch = R_IIC0_Type_to_ch(i2c_inst); |
| 292 |
R_BSP_IrqCfg((IRQn_Type const)ra_i2c_ch_to_rxirq[ch], ipl, (void *)NULL); |
| 293 |
R_BSP_IrqCfg((IRQn_Type const)ra_i2c_ch_to_txirq[ch], ipl, (void *)NULL); |
| 294 |
R_BSP_IrqCfg((IRQn_Type const)ra_i2c_ch_to_teirq[ch], ipl, (void *)NULL); |
| 295 |
R_BSP_IrqCfg((IRQn_Type const)ra_i2c_ch_to_erirq[ch], ipl, (void *)NULL); |
| 296 |
} |
| 297 |
|
| 298 |
void ra_i2c_clear_IR(R_IIC0_Type *i2c_inst) { |
| 299 |
uint32_t ch = R_IIC0_Type_to_ch(i2c_inst); |
| 300 |
R_BSP_IrqStatusClear((IRQn_Type const)ra_i2c_ch_to_rxirq[ch]); |
| 301 |
R_BSP_IrqStatusClear((IRQn_Type const)ra_i2c_ch_to_txirq[ch]); |
| 302 |
R_BSP_IrqStatusClear((IRQn_Type const)ra_i2c_ch_to_teirq[ch]); |
| 303 |
R_BSP_IrqStatusClear((IRQn_Type const)ra_i2c_ch_to_erirq[ch]); |
| 304 |
} |
| 305 |
|
| 306 |
// ToDo: need to properly implement |
| 307 |
static void ra_i2c_clock_calc(uint32_t baudrate, uint8_t *cks, uint8_t *brh, uint8_t *brl); |
| 308 |
static void ra_i2c_clock_calc(uint32_t baudrate, uint8_t *cks, uint8_t *brh, uint8_t *brl) { |
| 309 |
#if defined(RA4M1) |
| 310 |
if (baudrate >= 400000) { |
| 311 |
// assume clock is 400000Hz (PCLKB 32MHz) |
| 312 |
*cks = 1; |
| 313 |
*brh = 9; |
| 314 |
*brl = 20; |
| 315 |
} else { |
| 316 |
// assume clock is 100000Hz (PCLKB 32MHz) |
| 317 |
*cks = 3; |
| 318 |
*brh = 15; |
| 319 |
*brl = 18; |
| 320 |
} |
| 321 |
#elif defined(RA4W1) |
| 322 |
if (baudrate >= 400000) { |
| 323 |
// assume clock is 400000Hz (PCLKB 32MHz) |
| 324 |
*cks = 1; |
| 325 |
*brh = 9; |
| 326 |
*brl = 20; |
| 327 |
} else if (baudrate >= 100000) { |
| 328 |
// assume clock is 100000Hz (PCLKB 32MHz) |
| 329 |
*cks = 3; |
| 330 |
*brh = 15; |
| 331 |
*brl = 18; |
| 332 |
} else { |
| 333 |
// assume clock is 50000Hz (PCLKB 32MHz) |
| 334 |
*cks = 4; |
| 335 |
*brh = 15; |
| 336 |
*brl = 18; |
| 337 |
} |
| 338 |
#elif defined(RA6M1) |
| 339 |
// PCLKB 60MHz SCLE=0 |
| 340 |
if (baudrate >= 1000000) { |
| 341 |
*cks = 0; |
| 342 |
*brh = 15; |
| 343 |
*brl = 29; |
| 344 |
} else if (baudrate >= 400000) { |
| 345 |
// assume clock is 400000Hz (PCLKB 32MHz) |
| 346 |
*cks = 2; |
| 347 |
*brh = 8; |
| 348 |
*brl = 19; |
| 349 |
} else { |
| 350 |
// assume clock is 100000Hz (PCLKB 32MHz) |
| 351 |
*cks = 4; |
| 352 |
*brh = 14; |
| 353 |
*brl = 17; |
| 354 |
} |
| 355 |
#elif defined(RA6M2) || defined(RA6M3) |
| 356 |
// PCLKB 60MHz SCLE=0 |
| 357 |
if (baudrate >= RA_I2C_CLOCK_MAX) { |
| 358 |
*cks = 0; |
| 359 |
*brh = 15; |
| 360 |
*brl = 29; |
| 361 |
} else if (baudrate >= 400000) { |
| 362 |
// assume clock is 400000Hz |
| 363 |
*cks = 2; |
| 364 |
*brh = 8; |
| 365 |
*brl = 19; |
| 366 |
} else if (baudrate >= 100000) { |
| 367 |
// assume clock is 100000Hz |
| 368 |
*cks = 4; |
| 369 |
*brh = 14; |
| 370 |
*brl = 17; |
| 371 |
} else { |
| 372 |
// assume clock is 50000Hz |
| 373 |
*cks = 5; |
| 374 |
*brh = 14; |
| 375 |
*brl = 17; |
| 376 |
} |
| 377 |
#elif defined(RA6M5) |
| 378 |
// PCLKB 50MHz SCLE=0 |
| 379 |
if (baudrate >= RA_I2C_CLOCK_MAX) { |
| 380 |
*cks = 0; |
| 381 |
*brh = 12; |
| 382 |
*brl = 24; |
| 383 |
} else if (baudrate >= 400000) { |
| 384 |
// assume clock is 400000Hz |
| 385 |
*cks = 2; |
| 386 |
*brh = 7; |
| 387 |
*brl = 15; |
| 388 |
} else if (baudrate >= 100000) { |
| 389 |
// assume clock is 100000Hz |
| 390 |
*cks = 3; |
| 391 |
*brh = 24; |
| 392 |
*brl = 30; |
| 393 |
} else { |
| 394 |
// assume clock is 50000Hz |
| 395 |
*cks = 4; |
| 396 |
*brh = 24; |
| 397 |
*brl = 30; |
| 398 |
} |
| 399 |
#else |
| 400 |
#error "CMSIS MCU Series is not specified." |
| 401 |
#endif |
| 402 |
} |
| 403 |
|
| 404 |
void ra_i2c_set_baudrate(R_IIC0_Type *i2c_inst, uint32_t baudrate) { |
| 405 |
uint8_t cks; |
| 406 |
uint8_t brh; |
| 407 |
uint8_t brl; |
| 408 |
ra_i2c_clock_calc(baudrate, &cks, &brh, &brl); |
| 409 |
i2c_inst->ICMR1_b.CKS = cks; |
| 410 |
i2c_inst->ICBRH_b.BRH = brh; |
| 411 |
i2c_inst->ICBRL_b.BRL = brl; |
| 412 |
} |
| 413 |
|
| 414 |
void ra_i2c_init(R_IIC0_Type *i2c_inst, uint32_t scl, uint32_t sda, uint32_t baudrate) { |
| 415 |
ra_i2c_module_start(i2c_inst); |
| 416 |
ra_gpio_config(scl, GPIO_MODE_AF_OD, GPIO_NOPULL, GPIO_LOW_POWER, AF_I2C); |
| 417 |
ra_gpio_config(sda, GPIO_MODE_AF_OD, GPIO_NOPULL, GPIO_LOW_POWER, AF_I2C); |
| 418 |
ra_i2c_priority(i2c_inst, RA_PRI_I2C); |
| 419 |
i2c_inst->ICCR1_b.ICE = 0; // I2C disable |
| 420 |
i2c_inst->ICCR1_b.IICRST = 1; // I2C internal reset |
| 421 |
i2c_inst->ICIER = 0x00; // I2C disable all interrupts |
| 422 |
while (i2c_inst->ICIER != 0) { |
| 423 |
; |
| 424 |
} |
| 425 |
ra_i2c_clear_IR(i2c_inst); // clear IR |
| 426 |
i2c_inst->ICCR1_b.ICE = 1; // I2C enable |
| 427 |
ra_i2c_set_baudrate(i2c_inst, baudrate); |
| 428 |
i2c_inst->ICSER = 0x00; // I2C reset bus status enable register |
| 429 |
i2c_inst->ICMR3_b.ACKWP = 0x00; // I2C not allow to write ACKBT (transfer acknowledge bit) |
| 430 |
i2c_inst->ICIER = 0xFF; // Enable all interrupts |
| 431 |
i2c_inst->ICCR1_b.IICRST = 0; // I2C internal reset |
| 432 |
ra_i2c_irq_enable(i2c_inst); |
| 433 |
last_stop = true; |
| 434 |
return; |
| 435 |
} |
| 436 |
|
| 437 |
void ra_i2c_deinit(R_IIC0_Type *i2c_inst) { |
| 438 |
i2c_inst->ICIER = 0; // I2C interrupt disable |
| 439 |
i2c_inst->ICCR1_b.ICE = 0; // I2C disable |
| 440 |
ra_i2c_module_stop(i2c_inst); |
| 441 |
return; |
| 442 |
} |
| 443 |
|
| 444 |
void ra_i2c_xaction_start(R_IIC0_Type *i2c_inst, xaction_t *action, bool repeated_start) { |
| 445 |
uint32_t timeout; |
| 446 |
|
| 447 |
if (last_stop == false) { |
| 448 |
i2c_inst->ICSR2_b.START = 0; |
| 449 |
i2c_inst->ICCR2_b.RS = 1; |
| 450 |
return; /* We still keep I2C bus */ |
| 451 |
} |
| 452 |
timeout = RA_I2C_TIMEOUT_BUS_BUSY; |
| 453 |
while (i2c_inst->ICCR2_b.BBSY) { |
| 454 |
if (timeout-- == 0) { |
| 455 |
action->m_status = RA_I2C_STATUS_Stopped; |
| 456 |
action->m_error = RA_I2C_ERROR_BUSY; |
| 457 |
return; |
| 458 |
} |
| 459 |
} |
| 460 |
i2c_inst->ICCR2_b.ST = 1; // I2C start condition |
| 461 |
} |
| 462 |
|
| 463 |
void ra_i2c_xaction_stop() { |
| 464 |
last_stop = current_xaction->m_stop; |
| 465 |
} |
| 466 |
|
| 467 |
void ra_i2c_xunit_write_byte(R_IIC0_Type *i2c_inst, xaction_unit_t *unit) { |
| 468 |
i2c_inst->ICDRT = unit->buf[unit->m_bytes_transferred]; |
| 469 |
++unit->m_bytes_transferred; |
| 470 |
--unit->m_bytes_transfer; |
| 471 |
} |
| 472 |
|
| 473 |
void ra_i2c_xunit_read_byte(R_IIC0_Type *i2c_inst, xaction_unit_t *unit) { |
| 474 |
uint8_t data = i2c_inst->ICDRR; |
| 475 |
unit->buf[unit->m_bytes_transferred] = data; |
| 476 |
++unit->m_bytes_transferred; |
| 477 |
--unit->m_bytes_transfer; |
| 478 |
} |
| 479 |
|
| 480 |
void ra_i2c_xunit_init(xaction_unit_t *unit, uint8_t *buf, uint32_t size, bool fread, void *next) { |
| 481 |
unit->m_bytes_transferred = 0; |
| 482 |
unit->m_bytes_transfer = size; |
| 483 |
unit->m_bytes_total = size; |
| 484 |
unit->m_fread = fread; |
| 485 |
unit->buf = buf; |
| 486 |
unit->next = (void *)next; |
| 487 |
} |
| 488 |
|
| 489 |
void ra_i2c_xaction_init(xaction_t *action, xaction_unit_t *units, uint32_t size, uint32_t address, bool stop) { |
| 490 |
action->units = units; |
| 491 |
action->m_num_of_units = size; |
| 492 |
action->m_current = 0; |
| 493 |
action->m_address = (((address << 1) & 0xFE) | (units->m_fread ? 0x1 : 0x0)); |
| 494 |
action->m_status = RA_I2C_STATUS_Idle; |
| 495 |
action->m_error = RA_I2C_ERROR_OK; |
| 496 |
action->m_stop = stop; |
| 497 |
} |
| 498 |
|
| 499 |
static void ra_i2c_iceri_isr(R_IIC0_Type *i2c_inst) { |
| 500 |
xaction_t *action = current_xaction; |
| 501 |
if (i2c_inst->ICSR2_b.TMOF != 0) { |
| 502 |
action->m_error = RA_I2C_ERROR_TMOF; |
| 503 |
i2c_inst->ICSR2_b.TMOF = 0; |
| 504 |
i2c_inst->ICCR2_b.SP = 1; // request stop condition |
| 505 |
} |
| 506 |
if (i2c_inst->ICSR2_b.AL != 0) { |
| 507 |
action->m_error = RA_I2C_ERROR_AL; |
| 508 |
i2c_inst->ICSR2_b.AL = 0; |
| 509 |
i2c_inst->ICCR2_b.SP = 1; // request stop condition |
| 510 |
} |
| 511 |
// Check Start |
| 512 |
if (i2c_inst->ICSR2_b.START != 0) { |
| 513 |
if (action->m_status == RA_I2C_STATUS_Idle) { |
| 514 |
action->m_status = RA_I2C_STATUS_Started; |
| 515 |
} |
| 516 |
i2c_inst->ICSR2_b.START = 0; |
| 517 |
} |
| 518 |
// Check Stop |
| 519 |
if (i2c_inst->ICSR2_b.STOP != 0) { |
| 520 |
action->m_status = RA_I2C_STATUS_Stopped; |
| 521 |
i2c_inst->ICSR2_b.STOP = 0; |
| 522 |
i2c_inst->ICSR2_b.NACKF = 0; // clear for next transaction |
| 523 |
} |
| 524 |
// Check NACK reception |
| 525 |
if (i2c_inst->ICSR2_b.NACKF != 0) { |
| 526 |
action->m_error = RA_I2C_ERROR_NACK; |
| 527 |
i2c_inst->ICSR2_b.NACKF = 0; |
| 528 |
i2c_inst->ICCR2_b.SP = 1; // request stop condition |
| 529 |
} |
| 530 |
} |
| 531 |
|
| 532 |
static void ra_i2c_icrxi_isr(R_IIC0_Type *i2c_inst) { |
| 533 |
xaction_unit_t *unit = current_xaction_unit; |
| 534 |
xaction_t *action = current_xaction; |
| 535 |
// 1 byte or 2 bytes |
| 536 |
if (unit->m_bytes_total <= 2) { |
| 537 |
if (action->m_status == RA_I2C_STATUS_AddrWriteCompleted) { |
| 538 |
action->m_status = RA_I2C_STATUS_FirstReceiveCompleted; |
| 539 |
i2c_inst->ICMR3_b.WAIT = 1; |
| 540 |
// need dummy read processes for 1 byte and 2 bytes receive |
| 541 |
if (unit->m_bytes_total == 2) { |
| 542 |
(void)i2c_inst->ICDRR; // dummy read for 2 bytes receive |
| 543 |
} else { // m_bytes_total == 1 |
| 544 |
i2c_inst->ICMR3_b.ACKWP = 0x01; // enable write ACKBT (transfer acknowledge bit) |
| 545 |
i2c_inst->ICMR3_b.ACKBT = 1; |
| 546 |
i2c_inst->ICMR3_b.ACKWP = 0x00; // disable write ACKBT (transfer acknowledge bit) |
| 547 |
(void)i2c_inst->ICDRR; // dummy read for 1 byte receive |
| 548 |
} |
| 549 |
return; |
| 550 |
} |
| 551 |
if (unit->m_bytes_transfer == 2) { // last two data |
| 552 |
i2c_inst->ICMR3_b.ACKWP = 0x01; // enable write ACKBT (transfer acknowledge bit) |
| 553 |
i2c_inst->ICMR3_b.ACKBT = 1; |
| 554 |
i2c_inst->ICMR3_b.ACKWP = 0x00; // disable write ACKBT (transfer acknowledge bit) |
| 555 |
ra_i2c_xunit_read_byte(i2c_inst, unit); |
| 556 |
} else { // last data |
| 557 |
action->m_status = RA_I2C_STATUS_LastReceiveCompleted; |
| 558 |
if (action->m_stop == true) { |
| 559 |
i2c_inst->ICCR2_b.SP = 1; // request top condition |
| 560 |
} |
| 561 |
ra_i2c_xunit_read_byte(i2c_inst, unit); |
| 562 |
} |
| 563 |
return; |
| 564 |
} |
| 565 |
// 3 bytes or more |
| 566 |
if (action->m_status == RA_I2C_STATUS_AddrWriteCompleted) { |
| 567 |
(void)i2c_inst->ICDRR; // dummy read |
| 568 |
action->m_status = RA_I2C_STATUS_FirstReceiveCompleted; |
| 569 |
return; |
| 570 |
} |
| 571 |
if (unit->m_bytes_transfer > 2) { |
| 572 |
if (unit->m_bytes_transfer == 3) { |
| 573 |
i2c_inst->ICMR3_b.WAIT = 1; |
| 574 |
} |
| 575 |
ra_i2c_xunit_read_byte(i2c_inst, unit); |
| 576 |
} else if (unit->m_bytes_transfer == 2) { |
| 577 |
i2c_inst->ICMR3_b.ACKWP = 0x01; // enable write ACKBT (transfer acknowledge bit) |
| 578 |
i2c_inst->ICMR3_b.ACKBT = 1; |
| 579 |
i2c_inst->ICMR3_b.ACKWP = 0x00; // disable write ACKBT (transfer acknowledge bit) |
| 580 |
ra_i2c_xunit_read_byte(i2c_inst, unit); |
| 581 |
} else { |
| 582 |
// last data |
| 583 |
action->m_status = RA_I2C_STATUS_LastReceiveCompleted; |
| 584 |
if (action->m_stop == true) { |
| 585 |
i2c_inst->ICCR2_b.SP = 1; // request top condition |
| 586 |
} |
| 587 |
ra_i2c_xunit_read_byte(i2c_inst, unit); |
| 588 |
} |
| 589 |
} |
| 590 |
|
| 591 |
static void ra_i2c_ictxi_isr(R_IIC0_Type *i2c_inst) { |
| 592 |
xaction_t *action = current_xaction; |
| 593 |
xaction_unit_t *unit = current_xaction_unit; |
| 594 |
// When STIE is already checked. When TIE occurs before STIE |
| 595 |
if (action->m_status == RA_I2C_STATUS_Started || action->m_status == RA_I2C_STATUS_Idle) { |
| 596 |
i2c_inst->ICDRT = action->m_address; // I2C send slave address |
| 597 |
action->m_status = RA_I2C_STATUS_AddrWriteCompleted; |
| 598 |
return; |
| 599 |
} |
| 600 |
if (action->m_status == RA_I2C_STATUS_AddrWriteCompleted && |
| 601 |
unit->m_fread == false) { |
| 602 |
if (unit->m_bytes_transfer != 0) { |
| 603 |
ra_i2c_xunit_write_byte(i2c_inst, unit); |
| 604 |
} else { |
| 605 |
if (unit->next == (void *)NULL) { |
| 606 |
action->m_status = RA_I2C_STATUS_DataWriteCompleted; |
| 607 |
} else { |
| 608 |
current_xaction_unit = (xaction_unit_t *)unit->next; |
| 609 |
if (current_xaction_unit->m_bytes_transfer == 0) { |
| 610 |
action->m_status = RA_I2C_STATUS_DataWriteCompleted; |
| 611 |
} |
| 612 |
} |
| 613 |
} |
| 614 |
return; |
| 615 |
} |
| 616 |
} |
| 617 |
|
| 618 |
static void ra_i2c_ictei_isr(R_IIC0_Type *i2c_inst) { |
| 619 |
xaction_t *action = current_xaction; |
| 620 |
i2c_inst->ICSR2_b.TEND = 0; |
| 621 |
action->m_current++; |
| 622 |
if (action->m_current == action->m_num_of_units) { |
| 623 |
// We wrote all data and received transfer end, so request stop condition |
| 624 |
if (action->m_stop == true) { |
| 625 |
action->m_status = RA_I2C_STATUS_DataSendCompleted; |
| 626 |
i2c_inst->ICCR2_b.SP = 1; |
| 627 |
} else { |
| 628 |
action->m_status = RA_I2C_STATUS_Stopped; // set Stopped status instead STOP condition |
| 629 |
} |
| 630 |
} else { |
| 631 |
ra_i2c_xaction_start(i2c_inst, action, true); |
| 632 |
} |
| 633 |
} |
| 634 |
|
| 635 |
void iic_master_rxi_isr(void) { |
| 636 |
IRQn_Type irq = R_FSP_CurrentIrqGet(); |
| 637 |
uint8_t ch = irq_to_ch[(uint32_t)irq]; |
| 638 |
ra_i2c_icrxi_isr(ch_to_R_IIC0_Type(ch)); |
| 639 |
R_BSP_IrqStatusClear(irq); |
| 640 |
} |
| 641 |
|
| 642 |
void iic_master_txi_isr(void) { |
| 643 |
IRQn_Type irq = R_FSP_CurrentIrqGet(); |
| 644 |
uint8_t ch = irq_to_ch[(uint32_t)irq]; |
| 645 |
ra_i2c_ictxi_isr(ch_to_R_IIC0_Type(ch)); |
| 646 |
R_BSP_IrqStatusClear(irq); |
| 647 |
} |
| 648 |
|
| 649 |
void iic_master_tei_isr(void) { |
| 650 |
IRQn_Type irq = R_FSP_CurrentIrqGet(); |
| 651 |
uint8_t ch = irq_to_ch[(uint32_t)irq]; |
| 652 |
ra_i2c_ictei_isr(ch_to_R_IIC0_Type(ch)); |
| 653 |
R_BSP_IrqStatusClear(irq); |
| 654 |
} |
| 655 |
|
| 656 |
void iic_master_eri_isr(void) { |
| 657 |
IRQn_Type irq = R_FSP_CurrentIrqGet(); |
| 658 |
uint8_t ch = irq_to_ch[(uint32_t)irq]; |
| 659 |
ra_i2c_iceri_isr(ch_to_R_IIC0_Type(ch)); |
| 660 |
R_BSP_IrqStatusClear(irq); |
| 661 |
} |
| 662 |
|
| 663 |
bool ra_i2c_action_execute(R_IIC0_Type *i2c_inst, xaction_t *action, bool repeated_start, uint32_t timeout_ms) { |
| 664 |
bool flag = false; |
| 665 |
uint32_t start = uwTick; |
| 666 |
|
| 667 |
current_xaction = action; |
| 668 |
current_xaction_unit = action->units; |
| 669 |
|
| 670 |
ra_i2c_xaction_start(i2c_inst, action, repeated_start); |
| 671 |
while (true) { |
| 672 |
if (action->m_status == RA_I2C_STATUS_Stopped) { |
| 673 |
if (action->m_error == RA_I2C_ERROR_OK) { |
| 674 |
flag = true; |
| 675 |
} |
| 676 |
break; |
| 677 |
} |
| 678 |
if (uwTick - start > timeout_ms) { |
| 679 |
break; |
| 680 |
} |
| 681 |
} |
| 682 |
ra_i2c_xaction_stop(); |
| 683 |
if (last_stop == true) { |
| 684 |
mp_hal_delay_ms(3); // avoid device busy of next access. |
| 685 |
} |
| 686 |
current_xaction = (xaction_t *)NULL; |
| 687 |
current_xaction_unit = (xaction_unit_t *)NULL; |
| 688 |
|
| 689 |
return flag; |
| 690 |
} |