Debian Codegraph @

ports/nrf/boards/EVK_NINA_B3/mpconfigboard.h

raw
1 /*
2 * This file is part of the MicroPython project, http://micropython.org/
3 *
4 * The MIT License (MIT)
5 *
6 * Copyright (c) 2016 Glenn Ruben Bakke
7 *
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
14 *
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
17 *
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
25 */
26
27 // Pin numbering scheme for nrf52840-based boards
28 //
29 // Software Pins 0-31 correspond to physical pins
30 // 0.x and software Pins 32-47 correspond to physical pins 1.x.
31 //
32 // Example: Pin(47) would be 1.15 on the PCA10059
33
34 // Board data
35 #define MICROPY_HW_BOARD_NAME "EVK_NINA_B3"
36 #define MICROPY_HW_MCU_NAME "NRF52840"
37 #define MICROPY_PY_SYS_PLATFORM "nrf52"
38
39 // Enable @viper and @native
40 #define MICROPY_EMIT_THUMB (1)
41 #define MICROPY_EMIT_INLINE_THUMB (1)
42
43 // Enable optional modules
44 #define MICROPY_PY_ERRNO (1)
45 #define MICROPY_PY_HASHLIB (1)
46
47 // Peripherals Config
48 #define MICROPY_PY_MACHINE_UART (1)
49 #define MICROPY_PY_MACHINE_HW_PWM (1)
50 #define MICROPY_PY_MACHINE_RTCOUNTER (1)
51 #define MICROPY_PY_MACHINE_I2C (1)
52 #define MICROPY_PY_MACHINE_ADC (1)
53 #define MICROPY_PY_MACHINE_TEMP (1)
54 #define MICROPY_HW_ENABLE_RNG (1)
55
56 // Configure LEDS
57 #define MICROPY_HW_HAS_LED (1)
58 #define MICROPY_HW_LED_COUNT (3)
59 #define MICROPY_HW_LED_PULLUP (1)
60 #define MICROPY_HW_LED1 (13) // LED1 RED
61 #define MICROPY_HW_LED2 (25) // LED2 GREEN
62 #define MICROPY_HW_LED3 (32) // LED3 BLUE
63
64 // UART config
65 #define MICROPY_HW_UART1_RX (29)
66 #define MICROPY_HW_UART1_TX (45)
67 #define MICROPY_HW_UART1_CTS (44)
68 #define MICROPY_HW_UART1_RTS (31)
69 #define MICROPY_HW_UART1_HWFC (1)
70
71 // SPI config
72 #define MICROPY_HW_SPI0_NAME "SPI0"
73 #define MICROPY_HW_SPI0_SCK (12)
74 #define MICROPY_HW_SPI0_MOSI (14)
75 #define MICROPY_HW_SPI0_MISO (15)
76
77 // PWM Names
78 #define MICROPY_HW_PWM0_NAME "PWM0"
79 #define MICROPY_HW_PWM1_NAME "PWM1"
80 #define MICROPY_HW_PWM2_NAME "PWM2"
81
82 // How Many LED indexes appear in the help() message
83 #define HELP_TEXT_BOARD_LED "1,2,3"