| 1 |
* Version 20260221 |
| 2 |
- andy-bower: |
| 3 |
-- ignore config filenames with characters after .conf |
| 4 |
-- fix man page: -p option letter for --pidfile instead of -P |
| 5 |
-- add -S option to change main syslog socket /dev/log |
| 6 |
|
| 7 |
* Version 20260105 |
| 8 |
- andy-bower: |
| 9 |
-- replace scandirat() with scandir() for POSIX compatibility |
| 10 |
|
| 11 |
* Version 20260103 |
| 12 |
- SimonGottsch: |
| 13 |
-- support different logging formats for local and remote logging (log_format, remote_format): |
| 14 |
legacy_timestamp (the current format, still default), legacy, rfc3164, rfc5424 |
| 15 |
-- support multiple remote syslog servers (remote_host, remote_port, remote_log, remote_format) |
| 16 |
-- introduce optional severity levels (log_severity); optionally filter logs sent to remote servers (remote_severity_level) |
| 17 |
- andy-bower: |
| 18 |
-- fix config directory feature: config files are sorted now alphanumerically to get determined behaviour |
| 19 |
-- support multiple sockets as logging source, e.g. for chrooted or containerized applications (socket) |
| 20 |
-- introduce optional native log compression for rotated logs (compress), when linked with zlib (--without-compress) |
| 21 |
-- introduce delayed log compression (compress_delay), so the latest log(s) stay uncompressed |
| 22 |
-- some clean ups, e.g. get rid of PATH_MAX |
| 23 |
- m-kress: |
| 24 |
-- introduce config test parameter (--test-config or -t) |
| 25 |
|
| 26 |
* Version 20230719 |
| 27 |
- m-kress: |
| 28 |
-- Do not substitute trailing control characters of a log line, but eliminate them completelly. |
| 29 |
Be aware, that this change will break existing filters that rely on the trailing underscore! |
| 30 |
-- note in config file and man page: comments must be started with # only at the beginning of a line |
| 31 |
-- add "configdir" to config, which allows reading additional config files ending with *.conf |
| 32 |
|
| 33 |
* Version 20230707 |
| 34 |
- m-kress: |
| 35 |
-- add missing brackets to harmonize code |
| 36 |
-- check (stat) the program path given as command and ignore the command, if not existing |
| 37 |
- auouymous: |
| 38 |
-- fix behavior of (program_)?regex and (program_)?neg_regex conditions |
| 39 |
- LonEox78: |
| 40 |
-- pointer to directory name was not initialized, so eventually weird directories were created |
| 41 |
- orbea: |
| 42 |
-- replace RETSIGTYPE with void |
| 43 |
-- silence obsolete warnings |
| 44 |
|
| 45 |
* Version 20220214 |
| 46 |
- jovanlanik: |
| 47 |
-- port to pcre2 |
| 48 |
-- doku has been updated, removed a lot of inconsistencies |
| 49 |
-- add an option to change group |
| 50 |
-- add permissions to configuration |
| 51 |
-- remove unused errptr |
| 52 |
|
| 53 |
* Version 20200113 |
| 54 |
- avoid writing logs to STDOUT twice |
| 55 |
- add line feed to sent UDP log entries |
| 56 |
- rkonrad: |
| 57 |
-- add support for nanoseconds in time stamp |
| 58 |
|
| 59 |
* Version 20181125 |
| 60 |
- closed memory leaks for remote syslog |
| 61 |
|
| 62 |
* Version 2018510 |
| 63 |
- orbea: |
| 64 |
-- clean up automake files |
| 65 |
|
| 66 |
* Version 20180327 |
| 67 |
- minor fix in man page |
| 68 |
|
| 69 |
* Version 20180326 |
| 70 |
- moved to GitHub hvisage/metalog |
| 71 |
- m-kress: |
| 72 |
-- add remote logging to a log server via UDP |
| 73 |
-- silences a minor compiler warning (unused return value) and a missing cast |
| 74 |
-- add the special value "NONE" as parameter for the keyword "logdir". A log entry with "NONE will not be written to a log file. |
| 75 |
|
| 76 |
* Version 3 |
| 77 |
- fix interaction between "postrotate_cmd" and "logdir" (by Matt Whitlock |
| 78 |
#2887065) |
| 79 |
- switch to pkg-config for pcre look up |
| 80 |
- update bundled gnulib code |
| 81 |
|
| 82 |
* Version 2 |
| 83 |
- fix long standing typo where the minute field in the rotated log was |
| 84 |
replaced with the current month: %m instead of %M (by dorian33 #3027782) |
| 85 |
- add support for rate limiting of messages with the new "ratelimit" and |
| 86 |
"ratelimit_burst" keywords (by Martin von Gagern #2777251) |
| 87 |
- standardize warning/error output |
| 88 |
|
| 89 |
* Version 1 |
| 90 |
- switch over to using daemon() by default |
| 91 |
- fix stupid semicolon typo causing breaks on all lines (Gentoo Bug #258830) |
| 92 |
- add "flush" keyword to control flushing per log output (by Martin von |
| 93 |
Gagern #2549231) |
| 94 |
- add --with-unicode option to control unicode mangling #2669923 |
| 95 |
|
| 96 |
* Version 0.9 |
| 97 |
- add --no-kernel option by Adrian Perez de Castro to disable kernel message |
| 98 |
monitoring (#1727129 and #1751757) |
| 99 |
- convert source tree to use gnulib rather than random local replacements |
| 100 |
- fix by Amigac to not skip the "command" line when "logdir" and "break" are |
| 101 |
both in use (#2401520) |
| 102 |
- add "stamp_fmt" keyword to control the timestamp format in messages (based |
| 103 |
partially on work from cJ #1910360 and Philip White #1690349, and for |
| 104 |
#1232638) |
| 105 |
- make sure to flush all buffers on exit in buffered mode as pointed out by |
| 106 |
Ingo Bormuth (Gentoo Bug #233794) |
| 107 |
|
| 108 |
* Version 0.8 |
| 109 |
- tweak signal handlers some more (#1655169) |
| 110 |
- when dequeuing messages from the signal pipe, abort if malloc() failed |
| 111 |
- add hal filter to default metalog.conf (Gentoo Bug #174847) |
| 112 |
- add support from Eric Schwimmer / Debian for a new "postrotate_cmd" |
| 113 |
option (#1706160) |
| 114 |
- fix from Eric Schwimmer for div by zero error when maxtime = 0 (#1706158) |
| 115 |
- add support from Eric Schwimmer for controlling the "Last output repeated |
| 116 |
N times" message (#1706164) |
| 117 |
- use %e rather than %d for logging dates (Gentoo Bug #177258) |
| 118 |
|
| 119 |
* Version 0.8-rc4 |
| 120 |
- fix typo in previous change when checking the return of strftime() |
| 121 |
as reported by Mark Wagner. |
| 122 |
|
| 123 |
* Version 0.8-rc3 |
| 124 |
- use strftime() rather than printing out time values ourself so we get |
| 125 |
localization for free via the system libc and so we don't have to |
| 126 |
manipulate time structs ourselves (#1054478). |
| 127 |
|
| 128 |
* Version 0.8-rc2 |
| 129 |
- config file in package updated (pull fixes from Gentoo) |
| 130 |
- cleanup code a bit |
| 131 |
- make --help more [non-root] friendly |
| 132 |
- change default 'command spawn' messages to off (use --verbose to |
| 133 |
get back old noisy behavior) |
| 134 |
- check for setprogname() so we build on FreeBSD 6.1 (#1557585, fix |
| 135 |
from Diego Petteno) |
| 136 |
- fix error in memory allocation when using multiple facilities #1217560 |
| 137 |
- queue up messages in signal handlers via a pipe so that we don't hit |
| 138 |
deadlocks by using functions that are unsafe for use inside these states |
| 139 |
|
| 140 |
* Version 0.8-rc1 |
| 141 |
- new keyword: break |
| 142 |
- config file in package updated (synch with break keyword) |
| 143 |
- kernel logging problem fix |
| 144 |
- race condition fix |
| 145 |
- metalog.conf man page added |
| 146 |
- log rotation can be disabled with maxsize or maxtime = 0 |
| 147 |
|
| 148 |
* Version 0.7 |
| 149 |
- Logging is now synchronous by default. Use --async to get back to |
| 150 |
the asynchronous behavior. |
| 151 |
- Duplicate messages are now only logged once. |
| 152 |
- Negative regexes were implemented and programs can now also be |
| 153 |
matched against regexes. See the new neg_regex, program_regex and |
| 154 |
program_neg_regex keywords. |
| 155 |
- The maximum urgency can now be specified for each block. A new |
| 156 |
keyword, "maximum" completes "minimum". |
| 157 |
- A PID file is now created. It defaults to /var/run/metalog.pid but |
| 158 |
it can be changed with the --pidfile switch. |
| 159 |
- The location of the configuration file can now be changed with |
| 160 |
--with-configfile. |
| 161 |
- The code was cleaned up. |
| 162 |
|
| 163 |
* Version 0.7-beta |
| 164 |
- This is a transitional version with new features contributed by |
| 165 |
Hendrick Visage. |
| 166 |
|
| 167 |
* Version 0.6 |
| 168 |
- Metalog is now working on Linux, OpenBSD, FreeBSD and NetBSD. |
| 169 |
- New --consolelevel option to set up the console level on Linux. |
| 170 |
- RPM packages are now available. |
| 171 |
|
| 172 |
* Version 0.5 |
| 173 |
- First public release. |