| 1 |
<?xml version="1.0" encoding="UTF-8"?> |
| 2 |
<database xmlns="http://nouveau.freedesktop.org/" |
| 3 |
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" |
| 4 |
xsi:schemaLocation="https://gitlab.freedesktop.org/freedreno/ rules-fd.xsd"> |
| 5 |
<import file="freedreno_copyright.xml"/> |
| 6 |
|
| 7 |
<!-- |
| 8 |
This documents the internal register spaces used by the CP firmware since |
| 9 |
the QRisc instruction set was introduced. |
| 10 |
--> |
| 11 |
|
| 12 |
<domain name="A6XX_SQE_REG" width="32"> |
| 13 |
<!-- TODO: the carry flag is probably here somewhere --> |
| 14 |
|
| 15 |
<doc> |
| 16 |
Instruction to jump to when the CP is preempted to perform a |
| 17 |
context switch, initialized to entry 15 of the jump table at |
| 18 |
bootup. |
| 19 |
</doc> |
| 20 |
<reg32 name="PREEMPT_INSTR" offset="0x04"/> |
| 21 |
|
| 22 |
<doc> Stack Pointer for call/ret return address stack </doc> |
| 23 |
<reg32 name="SP" offset="0x05"/> |
| 24 |
|
| 25 |
<!-- TODO: make asm can handle arrays so we can use an array here --> |
| 26 |
<reg32 name="STACK0" offset="0x08" type="hex"/> |
| 27 |
<reg32 name="STACK1" offset="0x09" type="hex"/> |
| 28 |
<reg32 name="STACK2" offset="0x0a" type="hex"/> |
| 29 |
<reg32 name="STACK3" offset="0x0b" type="hex"/> |
| 30 |
<reg32 name="STACK4" offset="0x0c" type="hex"/> |
| 31 |
<reg32 name="STACK5" offset="0x0d" type="hex"/> |
| 32 |
<reg32 name="STACK6" offset="0x0e" type="hex"/> |
| 33 |
<reg32 name="STACK7" offset="0x0f" type="hex"/> |
| 34 |
</domain> |
| 35 |
|
| 36 |
<domain name="A5XX_CONTROL_REG" width="32"> |
| 37 |
<reg32 name="REG_WRITE_ADDR" offset="0x010"/> |
| 38 |
<reg32 name="REG_WRITE" offset="0x011"/> |
| 39 |
|
| 40 |
<doc> Controls high 32 bits used by store QRisc instruction </doc> |
| 41 |
<reg32 name="STORE_HI" offset="0x038"/> |
| 42 |
|
| 43 |
<reg64 name="IB1_BASE" offset="0x0b0"/> |
| 44 |
<reg32 name="IB1_DWORDS" offset="0x0b2"/> |
| 45 |
<reg64 name="IB2_BASE" offset="0x0b4"/> |
| 46 |
<reg32 name="IB2_DWORDS" offset="0x0b6"/> |
| 47 |
|
| 48 |
<doc> |
| 49 |
To use these, write the address and number of dwords, then read |
| 50 |
the result from $addr. |
| 51 |
</doc> |
| 52 |
<reg64 name="MEM_READ_ADDR" offset="0x0b8"/> |
| 53 |
<reg32 name="MEM_READ_DWORDS" offset="0x0ba"/> |
| 54 |
</domain> |
| 55 |
|
| 56 |
<domain name="A6XX_CONTROL_REG" width="32"> |
| 57 |
<reg32 name="RB_RPTR" offset="0x001"/> |
| 58 |
|
| 59 |
<reg64 name="IB1_BASE" offset="0x010"/> |
| 60 |
<reg32 name="IB1_DWORDS" offset="0x012"/> |
| 61 |
<reg64 name="IB2_BASE" offset="0x014"/> |
| 62 |
<reg32 name="IB2_DWORDS" offset="0x016"/> |
| 63 |
|
| 64 |
<reg64 name="MEM_READ_ADDR" offset="0x018"/> |
| 65 |
<reg32 name="MEM_READ_DWORDS" offset="0x01a"/> |
| 66 |
|
| 67 |
<reg32 name="REG_WRITE_ADDR" offset="0x024"/> |
| 68 |
<doc> |
| 69 |
Writing to this triggers a register write and auto-increments |
| 70 |
REG_WRITE_ADDR. |
| 71 |
|
| 72 |
Note that there seems to be some upper bits that are possilby |
| 73 |
flags, ie: |
| 74 |
|
| 75 |
l284: 0d12: 8a8c0003 mov $0c, 0x0003 << 20 |
| 76 |
GPR: $0c: 00300000 |
| 77 |
0d13: 318c9e0b or $0c, $0c, 0x9e0b |
| 78 |
GPR: $0c: 00309e0b |
| 79 |
0d14: a80c0024 cwrite $0c, [$00 + @REG_WRITE_ADDR], 0x0 |
| 80 |
CTRL: @REG_WRITE_ADDR: 00309e0b |
| 81 |
|
| 82 |
</doc> |
| 83 |
<reg32 name="REG_WRITE" offset="0x025"/> |
| 84 |
|
| 85 |
<doc> After setting these, read result from $regdata </doc> |
| 86 |
<reg32 name="REG_READ_DWORDS" offset="0x026"/> |
| 87 |
<reg32 name="REG_READ_ADDR" offset="0x027"/> |
| 88 |
|
| 89 |
<doc> |
| 90 |
Write to increase WFI_PEND_CTR, decremented by WFI_PEND_DECR |
| 91 |
pipe register. |
| 92 |
</doc> |
| 93 |
<reg32 name="WFI_PEND_INCR" offset="0x030"/> |
| 94 |
<reg32 name="QUERY_PEND_INCR" offset="0x031"/> |
| 95 |
<reg32 name="CACHE_FLUSH_PEND_INCR" offset="0x032"/> |
| 96 |
|
| 97 |
<reg32 name="WFI_PEND_CTR" offset="0x038"/> |
| 98 |
<reg32 name="QUERY_PEND_CTR" offset="0x039"/> |
| 99 |
<reg32 name="CACHE_FLUSH_PEND_CTR" offset="0x03a"/> |
| 100 |
|
| 101 |
<reg32 name="DRAW_STATE_SEL" offset="0x041"> |
| 102 |
<doc> |
| 103 |
SQE writes DRAW_STATE_SEL to select the SDS state group, and |
| 104 |
then reads out the SDS header (DRAW_STATE_HDR), ie. the first |
| 105 |
dword in the state group entry (see CP_SET_DRAW_STATE), and |
| 106 |
base address of the state group cmdstream (DRAW_STATE_BASE) |
| 107 |
</doc> |
| 108 |
</reg32> |
| 109 |
<reg64 name="SDS_BASE" offset="0x042"> |
| 110 |
<doc> |
| 111 |
base address for executing draw state group when IB_LEVEL |
| 112 |
is set to 3 (ie. it's a bit like IB3 equiv of IBn_BASE) |
| 113 |
|
| 114 |
Note that SDS_BASE/SDS_DWORDS seem to be per-state-group, |
| 115 |
the values reflected switch when DRAW_STATE_SEL is written. |
| 116 |
</doc> |
| 117 |
</reg64> |
| 118 |
<reg32 name="SDS_DWORDS" offset="0x044"> |
| 119 |
<doc> |
| 120 |
state group equiv of IBn_DWORDS |
| 121 |
</doc> |
| 122 |
</reg32> |
| 123 |
|
| 124 |
<reg64 name="DRAW_STATE_BASE" offset="0x045"/> |
| 125 |
<reg32 name="DRAW_STATE_HDR" offset="0x047"> |
| 126 |
<doc> |
| 127 |
Contains information from the first dword of the state group |
| 128 |
entry in CP_SET_DRAW_STATE, but format isn't exactly the |
| 129 |
same. The # of dwords is in low 16b, and mode mask is in |
| 130 |
high 16 bits |
| 131 |
</doc> |
| 132 |
</reg32> |
| 133 |
<reg32 name="DRAW_STATE_ACTIVE_BITMASK" offset="0x049"/> |
| 134 |
|
| 135 |
<doc> |
| 136 |
This register is written for each state group entry in |
| 137 |
CP_SET_DRAW_STATE. The value is copied directly from the packet |
| 138 |
to these registers so the format is identical to the first word. |
| 139 |
The draw state base is set via the (sds2) modifier. |
| 140 |
</doc> |
| 141 |
<reg32 name="DRAW_STATE_SET_HDR" offset="0x04a"/> |
| 142 |
|
| 143 |
<reg32 name="DRAW_STATE_SET_HDR_LPAC" offset="0x04c"/> |
| 144 |
|
| 145 |
<doc>Set to 1 before setting draw states, introduced in a660_sqe.fw</doc> |
| 146 |
<reg32 name="DRAW_STATE_SET_PENDING" offset="0x04d"/> |
| 147 |
|
| 148 |
<reg64 name="DRAW_STATE_SET_BASE_LPAC" offset="0x04f"/> |
| 149 |
|
| 150 |
<doc> Controls whether RB, IB1, or IB2 is executed </doc> |
| 151 |
<reg32 name="IB_LEVEL" offset="0x054"/> |
| 152 |
|
| 153 |
<doc> Controls high 32 bits used by load and store QRisc instructions </doc> |
| 154 |
<reg32 name="LOAD_STORE_HI" offset="0x058"/> |
| 155 |
|
| 156 |
<doc> |
| 157 |
Used for testing whether register protection does not allow a |
| 158 |
read. To use this register, write the register address to $usraddr |
| 159 |
with bit 20 or'd in and then write the register count to $data. Then |
| 160 |
the results of the test will be available in this register when |
| 161 |
bit 0 is set. |
| 162 |
</doc> |
| 163 |
<reg32 name="REG_READ_TEST_RESULT" offset="0x05b"> |
| 164 |
<bitfield name="READY" pos="0" type="boolean"/> |
| 165 |
<doc> Whether there was a register protection violation. </doc> |
| 166 |
<bitfield name="VIOLATION" pos="2" type="boolean"/> |
| 167 |
</reg32> |
| 168 |
|
| 169 |
<enum name="sqe_perfcntr_cntl"> |
| 170 |
<!-- 0 doesn't do anything --> |
| 171 |
<value value="1" name="INCR"/> |
| 172 |
<value value="2" name="START"/> |
| 173 |
<value value="3" name="STOP"/> |
| 174 |
</enum> |
| 175 |
|
| 176 |
<doc> |
| 177 |
An array of 2-bit fields each controlling a single countable. |
| 178 |
TODO: Test with modified firmware to confirm which countables each field controls |
| 179 |
</doc> |
| 180 |
<reg32 name="PERFCNTR_CNTL" offset="0x05d"> |
| 181 |
<bitfield name="NUM_PREEMPTIONS" low="0" high="1" type="sqe_perfcntr_cntl"/> |
| 182 |
<bitfield name="PREEMPTION_REACTION_DELAY" low="2" high="3" type="sqe_perfcntr_cntl"/> |
| 183 |
<bitfield name="PREEMPTION_SWITCH_OUT_TIME" low="4" high="5" type="sqe_perfcntr_cntl"/> |
| 184 |
<bitfield name="PREEMPTION_SWITCH_IN_TIME" low="6" high="7" type="sqe_perfcntr_cntl"/> |
| 185 |
<bitfield name="DEAD_DRAWS_IN_BIN_RENDER" low="8" high="9" type="sqe_perfcntr_cntl"/> |
| 186 |
<bitfield name="PREDICATED_DRAWS_KILLED" low="10" high="11" type="sqe_perfcntr_cntl"/> |
| 187 |
<!-- MODE_SWITCH? --> |
| 188 |
<bitfield name="ZPASS_DONE" low="14" high="15" type="sqe_perfcntr_cntl"/> |
| 189 |
<bitfield name="CONTEXT_DONE" low="16" high="17" type="sqe_perfcntr_cntl"/> |
| 190 |
<bitfield name="CACHE_FLUSH" low="18" high="19" type="sqe_perfcntr_cntl"/> |
| 191 |
<bitfield name="LONG_PREEMPTIONS" low="20" high="21" type="sqe_perfcntr_cntl"/> |
| 192 |
<bitfield name="VSD_DECODE_STARVE" low="22" high="23" type="sqe_perfcntr_cntl"/> |
| 193 |
<bitfield name="SYNC_STALL" low="24" high="25" type="sqe_perfcntr_cntl"/> |
| 194 |
<bitfield name="PM4_WFI_STALL" low="26" high="27" type="sqe_perfcntr_cntl"/> |
| 195 |
<bitfield name="SYS_WFI_STALL" low="28" high="29" type="sqe_perfcntr_cntl"/> |
| 196 |
</reg32> |
| 197 |
|
| 198 |
<doc> Used to initialize the jump table for handling packets at bootup </doc> |
| 199 |
<reg32 name="PACKET_TABLE_WRITE_ADDR" offset="0x060"/> |
| 200 |
<reg32 name="PACKET_TABLE_WRITE" offset="0x061"/> |
| 201 |
|
| 202 |
<doc> |
| 203 |
The zap shader uses the base address of itself, adding the offset of the embedded |
| 204 |
shader instructions, to program SP_CS_OBJ_START with the address of the shader |
| 205 |
part of the zap "shader" |
| 206 |
</doc> |
| 207 |
<reg64 name="ZAP_SHADER_ADDR" offset="0x062"/> |
| 208 |
|
| 209 |
<doc> Resettable counter used to implement PERF_CP_LONG_PREEMPTIONS </doc> |
| 210 |
<reg32 name="PREEMPTION_TIMER" offset="0x06e"/> |
| 211 |
<doc> Seemingly used to start/stop PREEMPTION_TIMER </doc> |
| 212 |
<reg32 name="PREEMPTION_TIMER_CNTL" offset="0x06f"> |
| 213 |
<bitfield name="RUNNING" pos="0"/> |
| 214 |
</reg32> |
| 215 |
|
| 216 |
<doc> Private mirror of CP_CONTEXT_SWITCH_CNTL </doc> |
| 217 |
<reg32 name="CONTEXT_SWITCH_CNTL" offset="0x70"/> |
| 218 |
|
| 219 |
<reg32 name="PREEMPT_ENABLE" offset="0x071"/> |
| 220 |
<reg32 name="SECURE_MODE" offset="0x075"/> |
| 221 |
|
| 222 |
<doc> Write 1 to trigger a preemption from SQE. Reads return 1 if SQE triggered preemption. </doc> |
| 223 |
<reg32 name="PREEMPT_TRIGGER" offset="0x072"/> |
| 224 |
|
| 225 |
<doc> |
| 226 |
Written by SQE throughout the preemption routine, with mostly |
| 227 |
monotonically increasing values, presumably used to determine where |
| 228 |
it is when it crashes. |
| 229 |
TODO: How do we read this? |
| 230 |
</doc> |
| 231 |
<reg32 name="PREEMPT_COOKIE" offset="0x078"/> |
| 232 |
|
| 233 |
<doc> |
| 234 |
This is a mirror of PC_MARKER. At preemption time, it's used to |
| 235 |
read the data written by CP_SET_MARKER to see what state the GPU |
| 236 |
is in. Because PC_MARKER is "just" a normal GPU register, writes |
| 237 |
to it are pipelined, so reading this gives the firmware the |
| 238 |
state the GPU is in when preempted, rather than the SQE which |
| 239 |
may be well ahead of the GPU. This is used e.g. to determine |
| 240 |
whether to save/restore GMEM. |
| 241 |
</doc> |
| 242 |
<reg32 name="MARKER" offset="0x098"/> |
| 243 |
|
| 244 |
<!-- |
| 245 |
Note: I think that registers above 0x100 are actually just a |
| 246 |
scratch space which can be used by firmware however it wants, |
| 247 |
so these might change if the the firmware is updated. |
| 248 |
--> |
| 249 |
|
| 250 |
<doc> |
| 251 |
These are addresses of various preemption records for the |
| 252 |
current context. When context switching, the CP will save the |
| 253 |
current state into these buffers, restore the state of the |
| 254 |
next context from the buffers in the corresponding |
| 255 |
CP_CONTEXT_SWITCH_PRIV_* registers written by the kernel, |
| 256 |
then set these internal registers to the contents of |
| 257 |
those registers. The kernel sets the initial values via |
| 258 |
CP_SET_PSEUDO_REG on startup, and from then on the firmware |
| 259 |
keeps track of them. |
| 260 |
</doc> |
| 261 |
<reg64 name="SAVE_REGISTER_SMMU_INFO" offset="0x110"/> |
| 262 |
<reg64 name="SAVE_REGISTER_PRIV_NON_SECURE" offset="0x112"/> |
| 263 |
<reg64 name="SAVE_REGISTER_PRIV_SECURE" offset="0x114"/> |
| 264 |
<reg64 name="SAVE_REGISTER_NON_PRIV" offset="0x116"/> |
| 265 |
<reg64 name="SAVE_REGISTER_COUNTER" offset="0x118"/> |
| 266 |
|
| 267 |
<doc> |
| 268 |
Used only during preemption, saved and restored from the "info" |
| 269 |
field of a6xx_preemption_record. From the downstream kernel: |
| 270 |
|
| 271 |
"Type of record. Written non-zero (usually) by CP. |
| 272 |
we must set to zero for all ringbuffers." |
| 273 |
</doc> |
| 274 |
|
| 275 |
<reg32 name="PREEMPTION_INFO" offset="0x126"/> |
| 276 |
|
| 277 |
<doc> |
| 278 |
Used to keep track of last value PC_MARKER was written to. Not |
| 279 |
necessarily equal to @MARKER due to pending writes. |
| 280 |
</doc> |
| 281 |
<reg32 name="MARKER_TEMP" offset="0x12a"/> |
| 282 |
|
| 283 |
<doc> |
| 284 |
Set by SET_MARKER, used to conditionally execute |
| 285 |
CP_COND_REG_EXEC and draw states. |
| 286 |
</doc> |
| 287 |
<reg32 name="MODE_BITMASK" offset="0x12b"/> |
| 288 |
|
| 289 |
<reg32 name="SCRATCH_REG0" offset="0x170"/> |
| 290 |
<reg32 name="SCRATCH_REG1" offset="0x171"/> |
| 291 |
<reg32 name="SCRATCH_REG2" offset="0x172"/> |
| 292 |
<reg32 name="SCRATCH_REG3" offset="0x173"/> |
| 293 |
<reg32 name="SCRATCH_REG4" offset="0x174"/> |
| 294 |
<reg32 name="SCRATCH_REG5" offset="0x175"/> |
| 295 |
<reg32 name="SCRATCH_REG6" offset="0x176"/> |
| 296 |
<reg32 name="SCRATCH_REG7" offset="0x177"/> |
| 297 |
|
| 298 |
<!-- new in gen3+ --> |
| 299 |
<reg32 name="PRED_REG" offset="0x17f"/> |
| 300 |
|
| 301 |
<reg32 name="THREAD_SYNC" offset="0x200"/> |
| 302 |
</domain> |
| 303 |
|
| 304 |
<domain name="A7XX_CONTROL_REG" width="32"> |
| 305 |
<reg32 name="RB_RPTR" offset="0x001"/> |
| 306 |
<reg32 name="PREEMPT_INSTR" offset="0x004"/> |
| 307 |
|
| 308 |
<reg64 name="IB1_BASE" offset="0x010"/> |
| 309 |
<reg32 name="IB1_DWORDS" offset="0x012"/> |
| 310 |
<reg64 name="IB2_BASE" offset="0x014"/> |
| 311 |
<reg32 name="IB2_DWORDS" offset="0x016"/> |
| 312 |
<reg64 name="IB3_BASE" offset="0x018"/> |
| 313 |
<reg32 name="IB3_DWORDS" offset="0x01a"/> |
| 314 |
|
| 315 |
<reg64 name="MEM_READ_ADDR" offset="0x01c"/> |
| 316 |
<reg32 name="MEM_READ_DWORDS" offset="0x01e"/> |
| 317 |
|
| 318 |
<reg32 name="WFI_PEND_INCR" offset="0x030"/> |
| 319 |
<reg32 name="QUERY_PEND_INCR" offset="0x031"/> |
| 320 |
<reg32 name="CACHE_CLEAN_PEND_INCR" offset="0x032"/> |
| 321 |
|
| 322 |
<reg32 name="REG_WRITE_ADDR" offset="0x036"/> |
| 323 |
<reg32 name="REG_WRITE" offset="0x037"/> |
| 324 |
|
| 325 |
<doc> After setting these, read result from $regdata </doc> |
| 326 |
<reg32 name="REG_READ_DWORDS" offset="0x038"/> |
| 327 |
<reg32 name="REG_READ_ADDR" offset="0x039"/> |
| 328 |
|
| 329 |
<reg32 name="CACHE_CLEAN_PEND_CTR" offset="0x03a"/> |
| 330 |
<reg32 name="WFI_PEND_CTR" offset="0x03e"/> |
| 331 |
<reg32 name="QUERY_PEND_CTR" offset="0x03f"/> |
| 332 |
|
| 333 |
<!-- |
| 334 |
These seem to be the same as a6xx, however they are only used |
| 335 |
for clearing draw state and preemption save/restore. |
| 336 |
--> |
| 337 |
<reg32 name="DRAW_STATE_SEL" offset="0x041"/> |
| 338 |
<reg64 name="SDS_BASE" offset="0x042"/> |
| 339 |
<reg32 name="SDS_DWORDS" offset="0x044"/> |
| 340 |
<reg64 name="DRAW_STATE_BASE" offset="0x045"/> |
| 341 |
<reg32 name="DRAW_STATE_HDR" offset="0x047"/> |
| 342 |
<reg32 name="DRAW_STATE_ACTIVE_BITMASK" offset="0x049"/> |
| 343 |
<doc> |
| 344 |
This is now a register on a7xx and not a scratch temporary |
| 345 |
because draw states are fetched automatically. However it has |
| 346 |
the same meaning and is written the same as before by |
| 347 |
CP_SET_MARKER. |
| 348 |
</doc> |
| 349 |
<reg32 name="MODE_BITMASK" offset="0x4b"/> |
| 350 |
|
| 351 |
<reg32 name="DRAW_STATE_SET_HDR" offset="0x04c"/> |
| 352 |
|
| 353 |
<doc>Set to 1 before setting draw states</doc> |
| 354 |
<reg32 name="DRAW_STATE_SET_PENDING" offset="0x04d"/> |
| 355 |
|
| 356 |
<doc>This is used by LPAC instead of (sds2) to write the base</doc> |
| 357 |
<reg64 name="DRAW_STATE_SET_BASE" offset="0x04f"/> |
| 358 |
|
| 359 |
<doc> Controls whether RB, IB1, IB2, IB3, or SDS is executed </doc> |
| 360 |
<reg32 name="IB_LEVEL" offset="0x054"/> |
| 361 |
|
| 362 |
<doc> Controls high 32 bits used by load and store qrisc instructions </doc> |
| 363 |
<reg32 name="LOAD_STORE_HI" offset="0x058"/> |
| 364 |
|
| 365 |
<reg32 name="REG_READ_TEST_RESULT" offset="0x05b"> |
| 366 |
<bitfield name="READY" pos="0" type="boolean"/> |
| 367 |
<doc> Whether there was a register protection violation. </doc> |
| 368 |
<bitfield name="VIOLATION" pos="2" type="boolean"/> |
| 369 |
<bitfield name="CLUSTER" low="4" high="6"/> |
| 370 |
</reg32> |
| 371 |
|
| 372 |
<!-- This seems to be the same as a6xx because the CP perfcntrs are the same --> |
| 373 |
<reg32 name="PERFCNTR_CNTL" offset="0x05d"> |
| 374 |
<bitfield name="NUM_PREEMPTIONS" low="0" high="1" type="sqe_perfcntr_cntl"/> |
| 375 |
<bitfield name="PREEMPTION_REACTION_DELAY" low="2" high="3" type="sqe_perfcntr_cntl"/> |
| 376 |
<bitfield name="PREEMPTION_SWITCH_OUT_TIME" low="4" high="5" type="sqe_perfcntr_cntl"/> |
| 377 |
<bitfield name="PREEMPTION_SWITCH_IN_TIME" low="6" high="7" type="sqe_perfcntr_cntl"/> |
| 378 |
<bitfield name="DEAD_DRAWS_IN_BIN_RENDER" low="8" high="9" type="sqe_perfcntr_cntl"/> |
| 379 |
<bitfield name="PREDICATED_DRAWS_KILLED" low="10" high="11" type="sqe_perfcntr_cntl"/> |
| 380 |
<!-- MODE_SWITCH? --> |
| 381 |
<bitfield name="ZPASS_DONE" low="14" high="15" type="sqe_perfcntr_cntl"/> |
| 382 |
<bitfield name="CONTEXT_DONE" low="16" high="17" type="sqe_perfcntr_cntl"/> |
| 383 |
<bitfield name="CACHE_FLUSH" low="18" high="19" type="sqe_perfcntr_cntl"/> |
| 384 |
<bitfield name="LONG_PREEMPTIONS" low="20" high="21" type="sqe_perfcntr_cntl"/> |
| 385 |
<bitfield name="VSD_DECODE_STARVE" low="22" high="23" type="sqe_perfcntr_cntl"/> |
| 386 |
<bitfield name="SYNC_STALL" low="24" high="25" type="sqe_perfcntr_cntl"/> |
| 387 |
<bitfield name="PM4_WFI_STALL" low="26" high="27" type="sqe_perfcntr_cntl"/> |
| 388 |
<bitfield name="SYS_WFI_STALL" low="28" high="29" type="sqe_perfcntr_cntl"/> |
| 389 |
</reg32> |
| 390 |
|
| 391 |
<doc> Used to initialize the jump table for handling packets at bootup </doc> |
| 392 |
<reg32 name="PACKET_TABLE_WRITE_ADDR" offset="0x060"/> |
| 393 |
<reg32 name="PACKET_TABLE_WRITE" offset="0x061"/> |
| 394 |
|
| 395 |
<!-- see a6xx above for explanation, these registers are the same --> |
| 396 |
<reg32 name="PREEMPTION_TIMER" offset="0x06e"/> |
| 397 |
<reg32 name="PREEMPTION_TIMER_CNTL" offset="0x06f"> |
| 398 |
<bitfield name="RUNNING" pos="0"/> |
| 399 |
</reg32> |
| 400 |
<reg32 name="CONTEXT_SWITCH_CNTL" offset="0x70"/> |
| 401 |
<reg32 name="PREEMPT_ENABLE" offset="0x071"/> |
| 402 |
<reg32 name="PREEMPT_TRIGGER" offset="0x072"/> |
| 403 |
<reg32 name="SECURE_MODE" offset="0x075"/> |
| 404 |
<reg32 name="PREEMPT_COOKIE" offset="0x078"/> |
| 405 |
|
| 406 |
<reg32 name="MARKER" offset="0x098"/> |
| 407 |
|
| 408 |
<doc>These registers seem to define a range that load/store instructions can access</doc> |
| 409 |
<reg32 name="LOAD_STORE_RANGE_MIN" offset="0x0a0"/> |
| 410 |
<reg32 name="LOAD_STORE_RANGE_LEN" offset="0x0a1"/> |
| 411 |
|
| 412 |
<doc> |
| 413 |
Register used to create critical sections when reading/writing |
| 414 |
shared memory (0x200-0x2ff). Each bit contains a lock. Writing 1 |
| 415 |
to the bit initiates a lock, reads return 1 once the lock is |
| 416 |
taken. Writing 0 unlocks. |
| 417 |
</doc> |
| 418 |
<reg32 name="COPROCESSOR_LOCK" offset="0x0b1"/> |
| 419 |
|
| 420 |
<doc> Replaces CP_APERTURE_CNTL_SQE on a7xx. Uses same format as CP_APERTURE_CNTL_HOST. </doc> |
| 421 |
<reg32 name="APERTURE_CNTL" offset="0x0d4"/> |
| 422 |
<doc> |
| 423 |
Aperture control used specially for preemption save and restore. |
| 424 |
Has extra fields compared to @APERTURE_CNTL. |
| 425 |
</doc> |
| 426 |
<reg32 name="APERTURE_CNTL_PREEMPT" offset="0x0d5"> |
| 427 |
<doc> |
| 428 |
When this is set this seems to redirect register writes |
| 429 |
to a special register space for triggering preemption |
| 430 |
save/restore actions. |
| 431 |
</doc> |
| 432 |
<bitfield name="USEPREEMPTREG" pos="16" type="boolean"/> |
| 433 |
<bitfield name="PIPE" low="12" high="13"/> |
| 434 |
<bitfield name="CLUSTER" low="8" high="10"/> |
| 435 |
<bitfield name="CONTEXT" low="4" high="5"/> |
| 436 |
</reg32> |
| 437 |
|
| 438 |
<reg64 name="BV_INSTR_BASE" offset="0x0d6"/> |
| 439 |
<reg32 name="BV_CNTL" offset="0x0d8"/> |
| 440 |
|
| 441 |
<reg64 name="LPAC_INSTR_BASE" offset="0x0d9"/> |
| 442 |
<reg32 name="LPAC_CNTL" offset="0x0db"/> |
| 443 |
|
| 444 |
<reg32 name="GLOBAL_TIMESTAMP" offset="0x0e2"/> |
| 445 |
<reg32 name="LOCAL_TIMESTAMP" offset="0x0e3"/> |
| 446 |
|
| 447 |
<!-- 0x100-0x1ff - thread-private scratch space as before --> |
| 448 |
<!-- 0x200-0x2ff - global register space for cross-thread communication --> |
| 449 |
|
| 450 |
<doc> |
| 451 |
The low 3 bits are used as a semaphore to let SQE wait for other |
| 452 |
coprocessors to start. SQE sets it to 0x7 before starting the |
| 453 |
coprocessors, then each coprocessor atomically clears a bit. |
| 454 |
Other bits are used for CP_THREAD_CONTROL::SYNC_THREADS and |
| 455 |
other internal syncing. |
| 456 |
</doc> |
| 457 |
<reg32 name="THREAD_SYNC" offset="0x23f"/> |
| 458 |
</domain> |
| 459 |
|
| 460 |
<!-- Starting with a750, the control registers are shuffled around --> |
| 461 |
|
| 462 |
<domain name="A7XX_GEN3_CONTROL_REG" width="32"> |
| 463 |
<reg32 name="COPROCESSOR_LOCK" offset="0x014"/> |
| 464 |
|
| 465 |
<reg32 name="REG_WRITE_ADDR" offset="0x018"/> |
| 466 |
<reg32 name="REG_WRITE" offset="0x019"/> |
| 467 |
|
| 468 |
<doc> After setting these, read result from $regdata </doc> |
| 469 |
<reg32 name="REG_READ_DWORDS" offset="0x01a"/> |
| 470 |
<reg32 name="REG_READ_ADDR" offset="0x01b"/> |
| 471 |
|
| 472 |
<reg32 name="APERTURE_CNTL" offset="0x01c"/> |
| 473 |
<reg32 name="APERTURE_CNTL_PREEMPT" offset="0x01d"/> |
| 474 |
|
| 475 |
<reg64 name="IB1_BASE" offset="0x020"/> |
| 476 |
<reg32 name="IB1_DWORDS" offset="0x022"/> |
| 477 |
<reg64 name="IB2_BASE" offset="0x024"/> |
| 478 |
<reg32 name="IB2_DWORDS" offset="0x026"/> |
| 479 |
<reg32 name="IB2_BASE_HI_PREEMPTION" offset="0x27"/> |
| 480 |
<reg64 name="IB3_BASE" offset="0x028"/> |
| 481 |
<reg32 name="IB3_DWORDS" offset="0x02a"/> |
| 482 |
|
| 483 |
<reg64 name="MEM_READ_ADDR" offset="0x02c"/> |
| 484 |
<reg32 name="MEM_READ_DWORDS" offset="0x02e"/> |
| 485 |
<reg32 name="MEM_READ_ADDR_HI_PREEMPTION" offset="0x02f"/> |
| 486 |
|
| 487 |
<reg32 name="IB_LEVEL" offset="0x03d"/> |
| 488 |
|
| 489 |
<reg32 name="MODE_BITMASK" offset="0x5b"/> |
| 490 |
|
| 491 |
<reg32 name="PACKET_TABLE_WRITE_ADDR" offset="0x070"/> |
| 492 |
<reg32 name="PACKET_TABLE_WRITE" offset="0x071"/> |
| 493 |
|
| 494 |
<reg32 name="LOAD_STORE_HI" offset="0x07a"/> |
| 495 |
|
| 496 |
<reg64 name="BV_INSTR_BASE" offset="0x080"/> |
| 497 |
<reg32 name="BV_CNTL" offset="0x082"/> |
| 498 |
|
| 499 |
<reg64 name="LPAC_INSTR_BASE" offset="0x083"/> |
| 500 |
<reg32 name="LPAC_CNTL" offset="0x085"/> |
| 501 |
|
| 502 |
<reg32 name="LOAD_STORE_RANGE_MIN" offset="0x0a2"/> |
| 503 |
<reg32 name="LOAD_STORE_RANGE_LEN" offset="0x0a3"/> |
| 504 |
|
| 505 |
<reg32 name="REG_READ_TEST_RESULT" offset="0x0a8"> |
| 506 |
<bitfield name="READY" pos="0" type="boolean"/> |
| 507 |
<doc> Whether there was a register protection violation. </doc> |
| 508 |
<bitfield name="VIOLATION" pos="2" type="boolean"/> |
| 509 |
<bitfield name="CLUSTER" low="4" high="6"/> |
| 510 |
</reg32> |
| 511 |
|
| 512 |
<reg32 name="WFI_PEND_INCR" offset="0x0b0"/> |
| 513 |
<reg32 name="QUERY_PEND_INCR" offset="0x0b1"/> |
| 514 |
|
| 515 |
<reg32 name="WFI_PEND_CTR" offset="0x0b2"/> |
| 516 |
<reg32 name="QUERY_PEND_CTR" offset="0x0b3"/> |
| 517 |
|
| 518 |
<reg32 name="CACHE_CLEAN_PEND_INCR" offset="0x0b4"/> |
| 519 |
<reg32 name="CACHE_CLEAN_PEND_CTR" offset="0x0b8"/> |
| 520 |
|
| 521 |
<reg32 name="PERFCNTR_CNTL" offset="0x0c9"> |
| 522 |
<bitfield name="NUM_PREEMPTIONS" low="0" high="1" type="sqe_perfcntr_cntl"/> |
| 523 |
<bitfield name="PREEMPTION_REACTION_DELAY" low="2" high="3" type="sqe_perfcntr_cntl"/> |
| 524 |
<bitfield name="PREEMPTION_SWITCH_OUT_TIME" low="4" high="5" type="sqe_perfcntr_cntl"/> |
| 525 |
<bitfield name="PREEMPTION_SWITCH_IN_TIME" low="6" high="7" type="sqe_perfcntr_cntl"/> |
| 526 |
<bitfield name="DEAD_DRAWS_IN_BIN_RENDER" low="8" high="9" type="sqe_perfcntr_cntl"/> |
| 527 |
<bitfield name="PREDICATED_DRAWS_KILLED" low="10" high="11" type="sqe_perfcntr_cntl"/> |
| 528 |
<!-- MODE_SWITCH? --> |
| 529 |
<bitfield name="ZPASS_DONE" low="14" high="15" type="sqe_perfcntr_cntl"/> |
| 530 |
<bitfield name="CONTEXT_DONE" low="16" high="17" type="sqe_perfcntr_cntl"/> |
| 531 |
<bitfield name="CACHE_FLUSH" low="18" high="19" type="sqe_perfcntr_cntl"/> |
| 532 |
<bitfield name="LONG_PREEMPTIONS" low="20" high="21" type="sqe_perfcntr_cntl"/> |
| 533 |
<bitfield name="VSD_DECODE_STARVE" low="22" high="23" type="sqe_perfcntr_cntl"/> |
| 534 |
<bitfield name="SYNC_STALL" low="24" high="25" type="sqe_perfcntr_cntl"/> |
| 535 |
<bitfield name="PM4_WFI_STALL" low="26" high="27" type="sqe_perfcntr_cntl"/> |
| 536 |
<bitfield name="SYS_WFI_STALL" low="28" high="29" type="sqe_perfcntr_cntl"/> |
| 537 |
</reg32> |
| 538 |
|
| 539 |
<reg32 name="COMPLETED_BR_COUNT" offset="0x101"/> |
| 540 |
<reg32 name="COMPLETED_BV_COUNT" offset="0x102"/> |
| 541 |
<reg32 name="TIMESTAMP_SUM" offset="0x103"/> |
| 542 |
<reg32 name="GLOBAL_TIMESTAMP" offset="0x104"/> |
| 543 |
<reg32 name="LOCAL_TIMESTAMP" offset="0x105"/> |
| 544 |
|
| 545 |
<reg32 name="CONTEXT_SWITCH_CNTL" offset="0x131"/> |
| 546 |
<reg32 name="PREEMPT_COOKIE" offset="0x132"/> |
| 547 |
<reg32 name="PREEMPT_ENABLE" offset="0x133"/> |
| 548 |
<reg32 name="PREEMPT_TRIGGER" offset="0x0134"/> |
| 549 |
<reg32 name="SECURE_MODE" offset="0x136"/> |
| 550 |
|
| 551 |
<reg32 name="MARKER" offset="0x138"/> |
| 552 |
|
| 553 |
<reg32 name="PREEMPTION_TIMER" offset="0x140"/> |
| 554 |
<reg32 name="PREEMPTION_TIMER_CNTL" offset="0x141"> |
| 555 |
<bitfield name="RUNNING" pos="0"/> |
| 556 |
</reg32> |
| 557 |
|
| 558 |
<reg64 name="AQE1_PREEMPT_BASE" offset="0x26e"/> |
| 559 |
<reg64 name="AQE0_PREEMPT_BASE" offset="0x275"/> |
| 560 |
|
| 561 |
<reg32 name="THREAD_SYNC" offset="0x27f"/> |
| 562 |
|
| 563 |
<!-- the scratch control registers are now at 0x400-0x5ff instead of 0x100-0x1ff --> |
| 564 |
</domain> |
| 565 |
|
| 566 |
</database> |