| 1 |
#ifndef __NV30_SHADER_H__ |
| 2 |
#define __NV30_SHADER_H__ |
| 3 |
|
| 4 |
/* Vertex programs instruction set |
| 5 |
* |
| 6 |
* 128bit opcodes, split into 4 32-bit ones for ease of use. |
| 7 |
* |
| 8 |
* Non-native instructions |
| 9 |
* ABS - MOV + NV40_VP_INST0_DEST_ABS |
| 10 |
* POW - EX2 + MUL + LG2 |
| 11 |
* SUB - ADD, second source negated |
| 12 |
* SWZ - MOV |
| 13 |
* |
| 14 |
* Register access |
| 15 |
* - Only one INPUT can be accessed per-instruction (move extras into TEMPs) |
| 16 |
* - Only one CONST can be accessed per-instruction (move extras into TEMPs) |
| 17 |
* |
| 18 |
* Relative Addressing |
| 19 |
* According to the value returned for |
| 20 |
* MAX_PROGRAM_NATIVE_ADDRESS_REGISTERS_ARB |
| 21 |
* |
| 22 |
* there are only two address registers available. The destination in the |
| 23 |
* ARL instruction is set to TEMP <n> (The temp isn't actually written). |
| 24 |
* |
| 25 |
* When using vanilla ARB_v_p, the proprietary driver will squish both the |
| 26 |
* available ADDRESS regs into the first hardware reg in the X and Y |
| 27 |
* components. |
| 28 |
* |
| 29 |
* To use an address reg as an index into consts, the CONST_SRC is set to |
| 30 |
* (const_base + offset) and INDEX_CONST is set. |
| 31 |
* |
| 32 |
* To access the second address reg use ADDR_REG_SELECT_1. A particular |
| 33 |
* component of the address regs is selected with ADDR_SWZ. |
| 34 |
* |
| 35 |
* Only one address register can be accessed per instruction. |
| 36 |
* |
| 37 |
* Conditional execution (see NV_vertex_program{2,3} for details) Conditional |
| 38 |
* execution of an instruction is enabled by setting COND_TEST_ENABLE, and |
| 39 |
* selecting the condition which will allow the test to pass with |
| 40 |
* COND_{FL,LT,...}. It is possible to swizzle the values in the condition |
| 41 |
* register, which allows for testing against an individual component. |
| 42 |
* |
| 43 |
* Branching: |
| 44 |
* |
| 45 |
* The BRA/CAL instructions seem to follow a slightly different opcode |
| 46 |
* layout. The destination instruction ID (IADDR) overlaps a source field. |
| 47 |
* Instruction ID's seem to be numbered based on the UPLOAD_FROM_ID FIFO |
| 48 |
* command, and is incremented automatically on each UPLOAD_INST FIFO |
| 49 |
* command. |
| 50 |
* |
| 51 |
* Conditional branching is achieved by using the condition tests described |
| 52 |
* above. There doesn't appear to be dedicated looping instructions, but |
| 53 |
* this can be done using a temp reg + conditional branching. |
| 54 |
* |
| 55 |
* Subroutines may be uploaded before the main program itself, but the first |
| 56 |
* executed instruction is determined by the PROGRAM_START_ID FIFO command. |
| 57 |
* |
| 58 |
*/ |
| 59 |
|
| 60 |
/* DWORD 0 */ |
| 61 |
|
| 62 |
/* guess that this is the same as nv40 */ |
| 63 |
#define NV30_VP_INST_INDEX_INPUT (1 << 27) |
| 64 |
|
| 65 |
#define NV30_VP_INST_ADDR_REG_SELECT_1 (1 << 24) |
| 66 |
#define NV30_VP_INST_SRC2_ABS (1 << 23) /* guess */ |
| 67 |
#define NV30_VP_INST_SRC1_ABS (1 << 22) /* guess */ |
| 68 |
#define NV30_VP_INST_SRC0_ABS (1 << 21) /* guess */ |
| 69 |
#define NV30_VP_INST_VEC_RESULT (1 << 20) |
| 70 |
#define NV30_VP_INST_DEST_TEMP_ID_SHIFT 16 |
| 71 |
#define NV30_VP_INST_DEST_TEMP_ID_MASK (0x0F << 16) |
| 72 |
#define NV30_VP_INST_COND_UPDATE_ENABLE (1<<15) |
| 73 |
#define NV30_VP_INST_VEC_DEST_TEMP_MASK (0x1F << 16) |
| 74 |
#define NV30_VP_INST_COND_TEST_ENABLE (1<<14) |
| 75 |
#define NV30_VP_INST_COND_SHIFT 11 |
| 76 |
#define NV30_VP_INST_COND_MASK (0x07 << 11) |
| 77 |
#define NV30_VP_INST_COND_SWZ_X_SHIFT 9 |
| 78 |
#define NV30_VP_INST_COND_SWZ_X_MASK (0x03 << 9) |
| 79 |
#define NV30_VP_INST_COND_SWZ_Y_SHIFT 7 |
| 80 |
#define NV30_VP_INST_COND_SWZ_Y_MASK (0x03 << 7) |
| 81 |
#define NV30_VP_INST_COND_SWZ_Z_SHIFT 5 |
| 82 |
#define NV30_VP_INST_COND_SWZ_Z_MASK (0x03 << 5) |
| 83 |
#define NV30_VP_INST_COND_SWZ_W_SHIFT 3 |
| 84 |
#define NV30_VP_INST_COND_SWZ_W_MASK (0x03 << 3) |
| 85 |
#define NV30_VP_INST_COND_SWZ_ALL_SHIFT 3 |
| 86 |
#define NV30_VP_INST_COND_SWZ_ALL_MASK (0xFF << 3) |
| 87 |
#define NV30_VP_INST_ADDR_SWZ_SHIFT 1 |
| 88 |
#define NV30_VP_INST_ADDR_SWZ_MASK (0x03 << 1) |
| 89 |
#define NV30_VP_INST_SCA_OPCODEH_SHIFT 0 |
| 90 |
#define NV30_VP_INST_SCA_OPCODEH_MASK (0x01 << 0) |
| 91 |
|
| 92 |
/* DWORD 1 */ |
| 93 |
#define NV30_VP_INST_SCA_OPCODEL_SHIFT 28 |
| 94 |
#define NV30_VP_INST_SCA_OPCODEL_MASK (0x0F << 28) |
| 95 |
#define NV30_VP_INST_VEC_OPCODE_SHIFT 23 |
| 96 |
#define NV30_VP_INST_VEC_OPCODE_MASK (0x1F << 23) |
| 97 |
#define NV30_VP_INST_CONST_SRC_SHIFT 14 |
| 98 |
#define NV30_VP_INST_CONST_SRC_MASK (0xFF << 14) |
| 99 |
#define NV30_VP_INST_INPUT_SRC_SHIFT 9 /*NV20*/ |
| 100 |
#define NV30_VP_INST_INPUT_SRC_MASK (0x0F << 9) /*NV20*/ |
| 101 |
#define NV30_VP_INST_SRC0H_SHIFT 0 /*NV20*/ |
| 102 |
#define NV30_VP_INST_SRC0H_MASK (0x1FF << 0) /*NV20*/ |
| 103 |
|
| 104 |
/* Please note: the IADDR fields overlap other fields because they are used |
| 105 |
* only for branch instructions. See Branching: label above |
| 106 |
* |
| 107 |
* DWORD 2 |
| 108 |
*/ |
| 109 |
#define NV30_VP_INST_SRC0L_SHIFT 26 /*NV20*/ |
| 110 |
#define NV30_VP_INST_SRC0L_MASK (0x3F <<26) /* NV30_VP_SRC0_LOW_MASK << 26 */ |
| 111 |
#define NV30_VP_INST_SRC1_SHIFT 11 /*NV20*/ |
| 112 |
#define NV30_VP_INST_SRC1_MASK (0x7FFF<<11) /*NV20*/ |
| 113 |
#define NV30_VP_INST_SRC2H_SHIFT 0 /*NV20*/ |
| 114 |
#define NV30_VP_INST_SRC2H_MASK (0x7FF << 0) /* NV30_VP_SRC2_HIGH_MASK >> 4*/ |
| 115 |
#define NV30_VP_INST_IADDR_SHIFT 2 |
| 116 |
#define NV30_VP_INST_IADDR_MASK (0x1FF << 2) /* NV30_VP_SRC2_LOW_MASK << 28 */ |
| 117 |
|
| 118 |
/* DWORD 3 */ |
| 119 |
#define NV30_VP_INST_SRC2L_SHIFT 28 /*NV20*/ |
| 120 |
#define NV30_VP_INST_SRC2L_MASK (0x0F <<28) /*NV20*/ |
| 121 |
#define NV30_VP_INST_STEMP_WRITEMASK_SHIFT 24 |
| 122 |
#define NV30_VP_INST_STEMP_WRITEMASK_MASK (0x0F << 24) |
| 123 |
#define NV30_VP_INST_VTEMP_WRITEMASK_SHIFT 20 |
| 124 |
#define NV30_VP_INST_VTEMP_WRITEMASK_MASK (0x0F << 20) |
| 125 |
#define NV30_VP_INST_SDEST_WRITEMASK_SHIFT 16 |
| 126 |
#define NV30_VP_INST_SDEST_WRITEMASK_MASK (0x0F << 16) |
| 127 |
#define NV30_VP_INST_VDEST_WRITEMASK_SHIFT 12 /*NV20*/ |
| 128 |
#define NV30_VP_INST_VDEST_WRITEMASK_MASK (0x0F << 12) /*NV20*/ |
| 129 |
#define NV30_VP_INST_DEST_SHIFT 2 |
| 130 |
#define NV30_VP_INST_DEST_MASK (0x1F << 2) |
| 131 |
# define NV30_VP_INST_DEST_POS 0 |
| 132 |
# define NV30_VP_INST_DEST_BFC0 1 |
| 133 |
# define NV30_VP_INST_DEST_BFC1 2 |
| 134 |
# define NV30_VP_INST_DEST_COL0 3 |
| 135 |
# define NV30_VP_INST_DEST_COL1 4 |
| 136 |
# define NV30_VP_INST_DEST_FOGC 5 |
| 137 |
# define NV30_VP_INST_DEST_PSZ 6 |
| 138 |
# define NV30_VP_INST_DEST_TC(n) (8+(n)) |
| 139 |
# define NV30_VP_INST_DEST_CLP(n) (17 + (n)) |
| 140 |
|
| 141 |
/* guess that this is the same as nv40 */ |
| 142 |
#define NV30_VP_INST_INDEX_CONST (1 << 1) |
| 143 |
|
| 144 |
/* Useful to split the source selection regs into their pieces */ |
| 145 |
#define NV30_VP_SRC0_HIGH_SHIFT 6 |
| 146 |
#define NV30_VP_SRC0_HIGH_MASK 0x00007FC0 |
| 147 |
#define NV30_VP_SRC0_LOW_MASK 0x0000003F |
| 148 |
#define NV30_VP_SRC2_HIGH_SHIFT 4 |
| 149 |
#define NV30_VP_SRC2_HIGH_MASK 0x00007FF0 |
| 150 |
#define NV30_VP_SRC2_LOW_MASK 0x0000000F |
| 151 |
|
| 152 |
|
| 153 |
/* Source-register definition - matches NV20 exactly */ |
| 154 |
#define NV30_VP_SRC_NEGATE (1<<14) |
| 155 |
#define NV30_VP_SRC_SWZ_X_SHIFT 12 |
| 156 |
#define NV30_VP_SRC_REG_SWZ_X_MASK (0x03 <<12) |
| 157 |
#define NV30_VP_SRC_SWZ_Y_SHIFT 10 |
| 158 |
#define NV30_VP_SRC_REG_SWZ_Y_MASK (0x03 <<10) |
| 159 |
#define NV30_VP_SRC_SWZ_Z_SHIFT 8 |
| 160 |
#define NV30_VP_SRC_REG_SWZ_Z_MASK (0x03 << 8) |
| 161 |
#define NV30_VP_SRC_SWZ_W_SHIFT 6 |
| 162 |
#define NV30_VP_SRC_REG_SWZ_W_MASK (0x03 << 6) |
| 163 |
#define NV30_VP_SRC_REG_SWZ_ALL_SHIFT 6 |
| 164 |
#define NV30_VP_SRC_REG_SWZ_ALL_MASK (0xFF << 6) |
| 165 |
#define NV30_VP_SRC_TEMP_SRC_SHIFT 2 |
| 166 |
#define NV30_VP_SRC_REG_TEMP_ID_MASK (0x0F << 0) |
| 167 |
#define NV30_VP_SRC_REG_TYPE_SHIFT 0 |
| 168 |
#define NV30_VP_SRC_REG_TYPE_MASK (0x03 << 0) |
| 169 |
#define NV30_VP_SRC_REG_TYPE_TEMP 1 |
| 170 |
#define NV30_VP_SRC_REG_TYPE_INPUT 2 |
| 171 |
#define NV30_VP_SRC_REG_TYPE_CONST 3 /* guess */ |
| 172 |
|
| 173 |
#include "nv30/nvfx_shader.h" |
| 174 |
|
| 175 |
#endif |