Debian Codegraph @

ChangeLog

raw ◀ ▶
1 Debian patch touch this file
1 20260511:
2 - fix data corruption occuring at the end of a tape, when the
3 transfer block size is not a multiple of the native block
4 size of the tape device (fix by Daniel Collins)
5 - restore terminal attributes on exit
6
7 20260221:
8 - added dynamic speed adjustment with low speed
9 - add support to bind network input to a specific interface
10
11 20251025:
12 - updated config.sub, config.guess, and instal-sh
13 - added MacOS support (submitted by Grady McBride)
14 - update for configure script
15 - added condition variables based infra structure for MacOS
16
17 20250809:
18 - fix cmake build issue
19 - fix some warnings on intentionally ignored return values
20
21 20250429:
22 - get number of available pages on NetBSD via sysctl
23 - use SYSCONFDIR instead of 'PREFIX "/etc"'
24 - clang configure fix for tapedrive emulation
25 - minor code updates
26
27 20241007:
28 - build fix for -Wincompatible-pointer-types
29 - configure script update to autoconf version 2.71
30
31 20240929:
32 - updated default buffer calculation for more sane defaults
33 - minor updates for debug messages
34
35 20240818:
36 - fix port range check (Peter Pentchev)
37 - fix ipv6 only mode
38 - enhanced incoming host check to work with IP, hostname, FQHN
39 - enhanced ipv6 hostname parsing
40
41 20240707:
42 - fix IPv4 address printing
43 - listen on IPv6 and IPv4 if possible
44 - add debug messages for defaults on address family
45 - build fix for systems without getaddrinfo
46 - gracefully handle empty address infos
47
48 20240107:
49 - corrections for documentation and help output
50 (patch by Andreas Hartmann)
51 - added environment variables for auto-loader command
52
53 20231216:
54 - changed from `which` to `command` for Debian forward compatibility
55
56 20230301:
57 - Fix breaking connections on WAN links: retry on EAGAIN
58 (fix by Nico Schümann)
59
60 20220418:
61 - fix handling of filesystem full on stdout
62
63 20211018:
64 - fixes related to TCP timeout handling
65 - enhancement: support setting config file via env var MBUFFERRC
66 - documentation update
67
68 20211004:
69 - make TCPTimeout=0 disable the TCP timeout
70 - changed default TCP timeout from 10s to 100s
71 - TCP timeout now can be give with suffixes ms,s,min,h
72 - documented option for TCP timeout
73
74 20210829:
75 - enhancement: accept IPv6 addresses in square bracket format
76 - enhancement: more detailed warning message for connect failures
77 - work around Solaris default old mercurial and incompatible sed
78
79 20210328:
80 - removed cancel after join for reader thread
81 - updated install-sh
82 - mbuffer.1 has outdated version tag
83
84 20210209:
85 - fix: hash algos should not suppress stdout
86
87 20200929:
88 - enhancement: added option --no-direct to disable use of O_DIRECT
89 - defaults: raised default TCP timeout to 10ms for WAN connections
90 - fix: leave TCP buffer size untouched if not set
91 - enhancement: add option to set TCP timeout
92 - performance optimization: use recv with MSG_WAITALL instead of read
93 - configure fix: look for objdump also with target prefix
94 - testing: make sure to use gtar for testing to avoid unexpected failures
95 - portability: NetBSD compatibility fix
96 - build enhancement: added dependency calculation for make
97 - build enhancement: automatic version string generation
98
99 20200505:
100 - configure fix for some powerpc toolchains
101 - update config.sub and config.guess
102 - added option to perform direct I/Os on temporary file
103
104 20191016:
105 - autoadjust dependent parameters
106 - human readable buffer size information instead of kiB
107
108 20190725:
109 - hashing infrastructure should also be enabled with libdl available
110 - report input file name in message for open failure
111 - fix: don't try to open network output as file after failure
112 - fix: potential issue related to inet6 hosts handling
113 - added complementary cmake based building and testing
114 - some cleanup work
115
116 20190127:
•117 - fix: erroneous empty file generation on network connection failure
118
119 20190119:
120 - enhanced default settings for better performance
121 - use O_DIRECT on input and output if possible
122 - option --direct is now deprecated and has no effect
123 - Output Size must be adjusted to Blocksize during initialization
124 - man-page corrections
125 - fixed some messages (typos and formatting)
126
127 20190113:
128 - fix for network initialization for systems without getaddrinfo
129 (patch by Peter Pentchev)
130 - support suppressing messages with Verbose=silent and Verbose=none
131 - fix detection of invalid arguments to option -v
132 - Copyright update to 2019
133
134 20181119:
135 - consistently use CLOCK_MONOTONIC if available
136 (patch by Peter Pentchev)
137 - handle time standing still or running backward
138 (only relevant on systems without CLOCK_MONOTONIC)
139 - updated INSTALL file to reflect available options
140 - added explanation for lack of MacOS support
141
142 20180625:
143 - linking of available hash libraries during runtime
144
145 20180505:
146 - fix typo in summary
147 - fix potential hang with small input size
148 - testing fix for BSD
149 - configure enhancement: objdump may be named gobjdump
150 - fix tape end of file marker may be ignored
151 - removed obsolete alpha code
152
153 20180410:
154 - build fix for hashing library variants
155 - support tapetest on systems with name variants of open and write
156 - run only network tests for supported address families
157 (patch supplied by Peter Pentchev)
158 - code update for hashing infrastructure
159 - make idev tests usable on more platforms
160 - determine amount of available memory via procfs
161 - option -d unintentionally consumes an argument
162 - idev.c should use libc's names
163 - support use of autoreconf
164
165 20180318:
166 - performance optimized defaults
167 - stricter arguments checking of mbuffer.rc
168 - handle FreeBSD's maximum semaphore value transparently
169 - print base 2 dimensions correctly (ki,Mi,Gi,Ti)
170 - FreeBSD patches by Eric Borisch
171
172 20171011:
173 - use $(etcdir) consistently for installation
174 - use AC_COMPILE_IF instead of AC_RUN_IF to support cross-compiling
175 - remove forward typedef for dest_t to support older compilers
176 - build fix for Solaris
177 - updated test infrastructure
178 - print pid on every message with --pid
179 - fix: potential hang, when one output fails to open
180
181 20170921:
182 - added jumpbuffer reading mode for inconsistent block sizes
183 - code separation into more files for enhanced readability
184 - some cleanup work for global variables
185 - fixed regression in sanity checks
186 - fix: option -f should truncate output file
187 - fix: failed opening of network output should not redirect to stdout
188 - fix: summary printout should respect quiet options
189
190 20170806:
191 - add support for libgcrypt
192 - add support for tape aware out-of-space handling
193 => ignores first out-of-space error message on every write
194 (patch by Adam Nielsen <[email protected]>)
195 - support setting verbosity in config file
196 - suppress gcc's unused result warnings - all have been manually checked
197 - updated install-sh, config.sub, and config.guess
198 - exit cleanly if all outputs failed to open but hashers are left
199 - minor fixes and enhancements
200 - minor code refactoring for clearer structure
201 - some code hardening
202 - build fix for OpenBSD
203 - work around mhash_get_hash_name_static crashing
204
205 20170515:
206 - fix false warning on comments in config files
207 - code update for config parsing
208 - makefile compatibility update
209
210 20170514:
211 - update: configure update for latest cygwin
212 - fix: detect missing md5.h in configure
213 - enhancement: adjust some messages to avoid line-wrapping
214 - enhancement: print status message to log if suppressed on console
215 - enhancement: also read config files in /etc and ${prefix}/etc
•216 - enhancement: simplified memory configuration detection scheme
217 - added an example config file, with documentation of all options
218 - added parameter StatusInterval
219 - fix for handling empty lines in config files
220 - fix: --append rejects existing files
221 - fix warnings related to thread status return code
222
223 20161115:
224 - enhancement: report percent done, when input size is known (is a file)
225 - enhancement: watchdog raises SIGKILL if SIGINT had no effect
226 - change: start watchdog when parsing option -W or after parsing all
227 options when activated via defaults file
228 => Originally the watchdog was started after output to make sure
229 output initialization doesn't unintentionally trigger the watchdog
230 due to delays with a manual setup on the receiving side in a
231 network situation.
232 => This behavior limits potential benefits when mbuffer is used in an
233 automated environment where output initialization might fail and
234 the watchdog would be of use.
235 => To avoid triggering the watchdog during network initialization, put
236 the watchdog option -W after network options -O and -I.
237 - fix: use thread-safe mt_usleep instead of sleep(3) for watchdog timing
238 - change: adjusted interface of mt_usleep to accept 64bit arguments
239
240 20160613:
241 - fix: fix potential assertion triggered by interrupted system call
242 - enhancement: ignore EINTR for I/O syscalls
243
244 20160228:
245 - fix: fix listen's backlog argument, which can cause issues on Linux 4.4
246 (patch by Matthijs van Drunen)
247
248 20151002:
249 - fix: SegV when argument to -v is missing
250 - fix: potential infinite loop on output error
251
252 20150412:
•253 - fix: watchdog cannot do its job if it is cleaned up too early
254 - fix: clear sa_flags and sa_mask before use, although ignored
255
256 20141227:
257 - added option --pid to print PID of current process
258 - updated usage to include option -W
259 - man page formatting fixes
260 - configure updates
261 - support compiling on systems that do not define PATH_MAX
262
263 20140310:
264 - added memory advise for buffer memory
265 - compatibility fix for Solars st driver
266 - prevent buffer overflow attack via defaults file
267 - ignore defaults file from other users
268 - updated documentation for use with cron
269 - minor bugfixes
270
271 20140126:
272 - new feature: set option defaults in ~/.mbuffer.rc
273 - enhancement: write status to the log file
274 - enhancement: added option to suppress status logging
275 - fix: formatting fix for summary message
276
277 20130220:
278 - reverted incorrect fix for -P 100, which may lead to data corruption
•279 - re-enable hash libraries (no correlation with data corruption)
280 - bail out if any output fails to initialize
281 - refixed hang on -P 100
282 - reduced sending overhead
283 - fixed handling of option -f
284
285 20130209:
286 - hash names should be compared case insensitive for convenience
287 - safeguard against missing argument to option --hash
288 - support for hash calculation withdrawn, due to potential data
289 corruption, when the buffer runs full
290
291 20121111:
292 - build fix for some platforms
293 - several minor code cleanups (removed some warnings)
294 - support float values as argument to memory options
295 - added a watchdog that terminates mbuffer if input
296 or output activity stalls (option -W)
297
298 20120505:
299 - fixed IPv6 client initialization on FreeBSD
300 - fix: suppress summary on stderr if -q is used with -l
301 - fix: option -P 100 may lead to hang
302
303 20110724:
304 - fix: garbage might be written after input error
305 - enhancement: prompt for additional volumes for argument "-n 0"
306 - enhancement: prompt for next volume on I/O error if -n is set
307 (some tape devices incorrectly return -1/EIO instead of 0)
308 - enhancement: added option to append to output file
309 - update: remove use of deprecated interface sigignore
310
311 20110317:
312 - fix: terminate ASAP if no working output is available
313 - enhancement: added option to terminate on any error
314 - fix: mbuffer blocks on SIGTTIN when started in background
315 - fix: display correct dimensions (e.g. kiB instead of kB)
316
317 20110119:
318 - Anniversary: 10 years of mbuffer
319 - fix for building on cygwin in a separate directory
320 - fix: incorrect sanity check concerning hashing and multivolume support
321 (patch by Sean Walmsley)
322
323 20101230:
324 - enhancement: hash should show up in log file
325 - enhancement: report last block number on volume
326 - enhancement: report times for each volume and tape changes
327 - cosmetic fix: need to convert thread ids to long for linux
328 - build enhancement: better cygwin and packaging environment support
329
330 20100526:
331 - fix: potential deadlock on SIGINT related to watermark algorithm
332 - fix: high watermark algorithm interferes with rate limitation
333
334 20100327:
335 - fix: hash calculation is omitted if no output is set
336 - fix: test procedure doesn't wait on Solaris 8
337 - some cosemtic fixes for the man page
338 - summary output to logfile should be independet of quiet mode
339
340 20091227:
341 - enforceSpeedLimit must use monotonic time source to prevent being
342 disturbed by ntp
343 - made test suite configurable and clean-up itself
344 (submitted by Peter Pentchev)
345 - made IPv6 code optional
346 - added check for block size of input device
347 - only determine 64bit compile flag if no CFLAGS given
348 - fix lockup on input error
349 - don't cancel non-existing thread in quiet mode
350 (caused SegV on Linux)
351 - BSD header inclusion update
352 - SIGINT cancellation fixes (systems other than Solaris need a hack)
353
354 20091122:
355 - fix superfluous ai_flags causing error on Solaris 8
356 - fix assertion failure after rejected connection
357 - configure fix for 64-bit builds
358 - minor lint cleanup
359 - added workaround for cancellation issues on Solaris 8/9
360
361 20091110:
362 - fix SIGINT hanging when input is idle
363 - several IPv6 fixes
364 - compile for 64 bit by default if available
365
366 20091012:
367 - hash calculation is faster if done in a separate thread
368 - new option --hash to select other algorithms of libmhash than md5
369 - omit creation of superfluous inputThread in absence of status output
370 - fix potential race condition during startup in high watermark code
371 [reported by Michal Soltys]
372 - reduce number of semaphore calls in high watermark code
373 - fix a potential deadlock on SIGINT
374 - fixed a typo in watermark example
375
376 20090628:
377 - added IPv6 support
378 - added support for port name lookup
379 - added another verbosity level for I/O messages
380 - refix libmhash initialization
381
382 20090215:
383 - fix status thread hang on very small transfer sizes
384 - fix libmhash initialization
385 - -q should not suppress output of -H
386 - reduced termination latency with status display running
387 - update for summary display
388 - changed default shell make shell to /bin/sh
389
390 20090113:
391 - fix for assertion failure of 64bit binaries in network code
392
393 20090106:
394 - BSD compatibility update
395 - replace use of deprecated atoi with strtol
396 - better argument checking for numeric options
397 - enhanced semaphore limits checking
398 - add phony targets
399
400 20081207:
401 - fixed some typos in man page
402 - TCP buffer tuning could be a little bit more intelligent
•403 - fixed formatting of some info messages
404 - tuneable TCP buffer with option --tcpbuffer
405
406 20081113:
407 - tune send and receive buffer of TCP stack to match block size
408 - added target check to Makefile
409 - fix: don't mix up file during open
410 - code cleanup/unification for MD5
411 - sendfile should also be used for writing to files
412 - sync cleanup on output thread instead of input thread
413 - fix: access to dest_t after free()
414 - unified summary and join between verbose and silent mode
415 - minor code cleanups
416
417 20081023:
418 - mbuffer should not abort on SIGTERM
419 - mbuffer should not segv on invalid arguments for options -m, -s
420 - transfer statistics should wait for the first block to be received
421 - minor code path optimization
422 - option -n should accept -n1
423
424 20081015:
425 - FIX REGRESSION: stdout may be corrupted by mbuffer
426 (This regression was the result of a patch to redirect
427 stdout of autoloader commands)
428
429 20081014:
430 - redirect autoloader stdout to mbuffer's stderr
431 - added support for O_DIRECT (use option --direct)
432 - options -o and -i should recognize "-" as stdin/stdout
433 - direct use Solaris' native semaphore implementation
434 - fixed cancellation issues
435 - manpath needs to be created
436 - sendfile should fallback to write if unsupported
437 - fixed maximum addressable memory message
438 - docu update
439
440 20080910:
•441 - new feature: support for multiple outputs
442 - new LICENSE: GPLv3
443 - fixed a race-condition in logging
444 - adjusted CFLAGS for gcc
445 - warn about LD_LIBRARY_PATH interfering with build process
446 - the exitcode of autoloader command should be checked
447 - changed default buffer size to use 2% of available memory
448 - changed default block size to system pagesize
449 - added make target for lint
450
451 20080507:
452 - memory locking for file fails if -L is passed before -T
453 - use MAP_SHARED instead of MAP_PRIVATE to simplify fork in system
454 - missing arguments may cause a SegV
455 - $(LIBS) should be after $(OBJECTS)
456
457 20080502:
458 - better support for device special files
459 (files under /dev shouldn't need -f to write to)
460 - update to always handle largefile correctly
461 - fix configure script for sendfile functionality
462 - allow in-memory locking of file based buffers
463 - minor docu updates
464 - minor build update
465 (compile with -c -O, mbuffer.o is dependent on Makefile)
466
467 20080329:
468 - configure should check if ST_BLKSIZE feature is available
469 - compile with -O instead of -g per default
470 - hostnames may have underscores and/or dash
471 - orthographic fix
472 - use inline and restrict if available
473 - honor --disable-assert
474 - use directio for input, too
475
476 20080212:
477 - fixed a race-condition causing incorrectly written last block
478
479 20080122:
480 - fix wrong assertion on dup2
481 - fix 'make distclean' to also remove mbuffer.exe
482 - fix installation of manpage
483
484 20080104:
485 - updated status display
486 - POSIX conformance update: read from stderr instead of relying on
487 /dev/tty exists, fallback to /dev/tty if stderr is unreadable
488 - update to build on HPUX.11 (thanks go to testdrive.hp.com)
489 - several configure fixes and updates
490 - fixed invalid exitcode without console (Alex Kramarov)
491 - correction for full/empty report
492
493 20070911:
494 - bugfix: search for MD5 functions with correct function names
495
496 20070826:
497 - bugfix: search for MD5 functions in libcrypto instead of libssl
498 - bugfix: search for MD5 functions in libmd5 using different function
499 to avoid incorrect caching of results
500
501 20070518:
502 - bugfix: misplaced ifdef could lead to failures for options -d and -b
503 on systems that do not support device block size determination
504 - fixed possible hang on SIGINT without status thread
505 - write summary to stderr if no tty is available
506
507 20070502:
508 - added support for setting the output device's volume size explicitly
509 (patch by Sean Walmsley)
510 - minor cleanups
511 - make locking more solid
512 (in theory [only], a deadlock could have occurred)
513 - assert() everything
514
515 20070401:
516 - prefix name of executable before every message
517 - added some missing newlines
518 - set dependency for "make install" on "make"
519 (i.e. "make install" also builds mbuffer)
520
521 20070317:
522 - fix: mbuffer erroneously return with EXIT_SUCCESS when it got
523 interrupted by SIGINT or SIGTERM
524
525 20060728:
526 - changed signal handling to prevent syscalls returning with EINTR in
527 reader and writer
528 - fix for warnings, fatals, and errors getting truncated
529 - sleep before printing I/O rates for the first time to prevent showing
530 insane values
531
532 20060704:
533 - use condition variables to safely signal crossing of watermarks
534 - include times full/empty (crossing of low/high watermark) in summary
535 (proposal by Alex Kramarov)
536 - enhanced status and summary output to be display stats with a higher
537 precisions
538
539 20060626:
540 - bugfix and enhancement for rate limitation code
541 - fixed regressions caused by switching from float to double
542 - make sure outputThread doesn't start initially if -P is set
543 - write debug logs a little bit more thread friendly
544 (i.e. switched from stream- to normal file ops)
545
546 20060616:
547 - added speed limiting (options -r and -R)
548 - fix errormessage in calcint
549 - show option -d in usage output only if it is available
550 - use of float really doesn't make any sense nowadays;
551 changed all floats to double
552
553 20060421:
•554 - set exitcode to failure whenever an error occurs
555 - fixed a warning
556
557 20060324:
558 - added option -c to enable synchronous data integrity I/O:
559 This was enabled by default until now, but may cause a decrease in
560 performance as it requires a higher number of I/O ops. On systems
561 without full synchronous data integrity support, no difference will
562 be observable concerning performance. Systems that support it, will
•563 gain increased performance without -c, but error reporting will be
564 more precise with -c.
565 - changed errormessages to include offset
566 - added support for Solaris' directio hinting
567 - made memlock support an automagic option (compiled in if available)
568 - simplify CFLAGS overriding
569 - more portable largefile support solution
570 - minimized configure script
571 - default to native compiler instead of gcc
572
573 20060217:
574 - made signal handling more standards conforming
575 - use deferred cancellation instead of asynchronous
576 - fixed some debug messages
577 - use sendfile only for sockets
578
579 20060126:
580 - clarified some errormessages
581 - fixed some typos
582 - updated README file
583
584 20051006:
585 - added support for sendfile
586 (AFAIK only the Solaris version supports sending from buffers)
587 - added memory locking support
588 - added support to set buffer size as percentage of physical memory
589 - open file with O_LARGEFILE per default
590 - added some command-line options for existing functionality
591 (-H, -V)
592 - compile as 64bit executable on opteron and sparc architectures by
593 default
594 - defaulting to /var/tmp for buffer files, as /tmp is a swap based
595 filesystem on some operating systems
596 - use TMPDIR environment variable if available to determine where
597 to put a buffer file
598
599 20051003:
600 - increased maximum value of number of blocks
601 - doku updates
602 - openssl build fixes
603 - fixed some warnings
604 - install man page to correct location
605 - reuse networking sockets
606 - do not bail out if output does not support syncing
607 (thank you to Wolfgang Denk for some suggestions)
608
609 20050730:
610 - made mbuffer.c lint clean
611 - fixed some types
612 - Makefile fix for install
613
614 20050726:
615 - added support for openssl based md5 hashing
616 - support of transfer summary in gigabyte
617 - support for passing buffer size in gigabyte (G)
618 (please pass the relevant CFLAGS for 64Bit executables for
619 your compiler to configure)
620 - added support for passing command to autoloader
621 (patch submitted by Wolfgang Denk)
622 - enhanced network parameter parsing
623 - FIX: transient error in status display
624 - FIX: mbuffer could hang on first SIGINT (chance 1/3)
625 - fixed a bug in network client verification code
626 - pass CFLAGS also to link phase
627 - unlink tmpfile as early as possible
628 - check close for errors
629 (see Chris Gerhard's Weblog concerning close on
630 http://blogs.sun.com/roller/page/chrisg?anchor=did_that_close_succeed)
631 - additional sanity checks for buffer limits
632
633 20050510:
634 - fixed possible lockup upon SIGINT
635 - fixed displayed time
636 - updated display to change to MB instead of kB when > 3072kB
637
638 20050321:
639 - compile time fix for gentoo and suse 9.2
640 - made --enable-debug and --enable-md5 work
641 - gcc optimization flag set to -O2, -O as default
642
643 20050125:
644 - fixed operation of low watermark (-p)
•645 - made printf formatting more standard conforming
646 - start output before input thread
647 - more minor fixes
648
649 20050124 (unannounced interims version):
650 - fixed summary bug reported
651 - kicked automake
652 - removed locale support (too much work to support properly)
653 - changed debugmsg to a C99 macro, if debugging is switched off
654 - fix: final newline of statusThread was printf()ed to stderr instead
655 of Terminal
656 - fix: potential incorrect written last block
657 - fixed warnings: comparison of signed and unsigned
658 - beautified summary
659 - added low watermark (request by Greg Freemyer)
660 (restarts reading if dropped below - needed for FAST streamers;
661 I don't have such a beast and I never expected such a thing to exist...)
662 WARNING: changed argument -p to represent low watermark (was high watermark)
663 so that both options are easier to remember
664 - eliminated dead code
665 - changed status of networking code to stable
666 - removed NDEBUG from config.h and configure, because assert()s are
667 always "a good thing TM"
668 - encapsulated Terminal I/O within Mutex
669 - md5 hashing option added (disabled by default, proposal by Greg Freemyer),
670 using either mhash or md5 library, whatever is available
671 - some more cleanups
672
673 20011008:
674 - more detailed errormsg for host name resolving
675 - beautified some messages
676 - compile/linker fix
677
678 20010807:
679 - update for networking code: added client host checking
680 - message update
681 - docu update
682 - localization added
683
684 20010716:
685 - fixed option -q to not block out usage of multi
686 volume support
687 - docu update
688 - minor debug message update
689 - more autoloader sanity checks
690 - changed status for networking stuff to BETA
691 i.e. new configure option "--enable-networking"
692
693 20010704:
694 - fixed possible termination hang on write error
695 - fixed debugmessage for input thread
696 - added support for autoloaders
697 - update for experimental networking code
698 - docu update
699
700 20010703:
701 - update for debug messages
702 - update for experimental network code
703 (interface selection is now possible,
704 hostnames are resolved correctly and more;
705 seems like getting stable...)
706
707 20010702:
708 - corrected message for mem-allocation
709 - added warning message for certain multi-volume use
710 - enhanced debugging messages
711 - (hopefully) last bugfix for multi-volume code
712
713 20010628:
714 - added Option -d to use blocksize of output device
715 for write (was default behaviour, but isn't needed
716 in most cases and slows data transfer down)
717 - changed statusline (proposal by Dan Hollis)
718 - minor bugfix for handling read errors (size of
719 writable block fragment is now set correctly)
720 [probably nobody ever cares anyway]
721 - updates for experimental networking (configure)
722
723 20010626:
724 - bugfix: mbuffer didn't work anymore with pipes due
725 to incorrect set Outsize (0)
726
727 20010624:
728 - added experimental networking code
729 - bugfix for multivolume-code which might have caused
730 problems on devices which have a size which is
731 no multiple of Blocksize
732 - docu update
733
734 20010622:
735 - architecture switches for x86 changed to match gcc-3.0
736 - 64 Bit updates for huge data amounts
737 - docu update
738
739 20010621:
740 - bugfix for option -T
741
742 20010619:
743 - multi-volume support is now enabled by default
744 - minor docu updates
745 - fix for configure to work on Solaris 5.1
746
747 20010528:
748 - semantic fix for option -p to be consistend with buffer
749 - bugfix: for dropped blocks in multi-volumen code
750 - fix for lockup if SIG_BRK is sent during a volume request
751
752 20010518:
753 - Bugfix: multi volume output now should work
754 (bugreport by Dan Hollis)
755 - docu update
756 - added some extra checks after running lint...
757
758 20010515:
759 - Docu update concerning usage of multi volume support
760 - multi volume options consistency checking added
761
762 20010509:
763 - summary is now also displayed upon break and terminate
764 - Bugfix: summary overflow
765 - experimental feature: input of multiple volumes
766
767 20010507:
768 - status messages are now printed to the terminal not to stderr
769 - Bugfix: for output blocksize code
770 - documentation update
771 - new: summary information
772 - experimental feature: output to multiple volumes
773
774 20010426:
•775 - Bugfix: fixed sleep, which limited the performance to 1MB/s
776 (credits go to Padraig Brady <[email protected]>)
777 - Bugfix: fixed incorrect display of total datatransfer for >2GB
778 - Cosmetic: on sighup print newline on stderr
779 - added manpage
780
781 20010208:
782 - Bugfix: option -p did not work
783 - reworked option flags (-h is now -t, -t is now -T)
784 - output is now done with the blocksize of the output stream
785 otherwise direct writing to a tape device failed under Linux
786
787 20010124:
788 - Bugfix: outputThread terminated too early in certain cases
•789 - Fix for correct termination if an error occurred
790 - added install rule in Makefile
•791 - status messages are now independent of other messages
792 - a little bit more verbose debugging info