| 1 |
# |
| 2 |
# Verify that the wsrep XID gets updated in InnoDB rollback segment |
| 3 |
# properly and can be recovered with --wsrep-recover |
| 4 |
# |
| 5 |
# The test runs the following scenarios: |
| 6 |
# |
| 7 |
# 1) The server is started but no SQL is run |
| 8 |
# 2) DDL is executed |
| 9 |
# 3) INSERT is executed |
| 10 |
# 4) Two INSERTs are executed so that the first one in order will be |
| 11 |
# blocked after certification and the second one before entering |
| 12 |
# commit order critical section. |
| 13 |
# 5) Two DMLs are executed so that the prepare step is run out of order. |
| 14 |
# Both transactions are blocked before commit order critical section. |
| 15 |
# |
| 16 |
# After each scenario server is killed and the recovered position |
| 17 |
# is validated. |
| 18 |
# |
| 19 |
|
| 20 |
--source include/have_wsrep.inc |
| 21 |
--source include/have_innodb.inc |
| 22 |
--source include/have_wsrep_provider.inc |
| 23 |
--source include/have_debug_sync.inc |
| 24 |
|
| 25 |
# Binlog option for recovery run. This must be set in the test because |
| 26 |
# combinations file causes log-bin option to be set from command line, |
| 27 |
# not via my.cnf. |
| 28 |
# |
| 29 |
--let $log_bin = `SELECT @@log_bin` |
| 30 |
if ($log_bin) { |
| 31 |
--let $wsrep_recover_binlog_opt = --log-bin |
| 32 |
} |
| 33 |
|
| 34 |
# |
| 35 |
# Scenario 1 |
| 36 |
# The expected recovered seqno is 1 corresponding to initial cluster |
| 37 |
# configuration change. |
| 38 |
# |
| 39 |
let $restart_noprint=2; |
| 40 |
--source include/kill_mysqld.inc |
| 41 |
--source wsrep-recover-step.inc |
| 42 |
--echo Expect seqno 1 |
| 43 |
--echo $wsrep_recover_start_position_seqno |
| 44 |
|
| 45 |
--let $restart_parameters = --wsrep-start-position=$wsrep_recover_start_position_uuid:$wsrep_recover_start_position_seqno |
| 46 |
--source include/start_mysqld.inc |
| 47 |
--source include/wait_wsrep_ready.inc |
| 48 |
|
| 49 |
# |
| 50 |
# Senario 2 |
| 51 |
# The expected recovered seqno is 3 corresponding to two configuration |
| 52 |
# change events and CREATE TABLE. |
| 53 |
# |
| 54 |
let $restart_noprint=2; |
| 55 |
|
| 56 |
CREATE TABLE t1 (f1 INT PRIMARY KEY) ENGINE=InnoDB; |
| 57 |
--source include/kill_mysqld.inc |
| 58 |
--source wsrep-recover-step.inc |
| 59 |
--echo Expect seqno 3 |
| 60 |
--echo $wsrep_recover_start_position_seqno |
| 61 |
|
| 62 |
--let $restart_parameters = --wsrep-start-position=$wsrep_recover_start_position_uuid:$wsrep_recover_start_position_seqno |
| 63 |
--source include/start_mysqld.inc |
| 64 |
--source include/wait_wsrep_ready.inc |
| 65 |
|
| 66 |
# |
| 67 |
# Scenario 3 |
| 68 |
# The expected recovered seqno is 5 corresponding to three configuration |
| 69 |
# change events, CREATE TABLE and INSERT. |
| 70 |
# |
| 71 |
# The expected wsrep_last_committed after the server is restarted is 6. |
| 72 |
# |
| 73 |
let $restart_noprint=2; |
| 74 |
|
| 75 |
INSERT INTO t1 VALUES (5); |
| 76 |
--source include/kill_mysqld.inc |
| 77 |
--source wsrep-recover-step.inc |
| 78 |
--echo Expect seqno 5 |
| 79 |
--echo $wsrep_recover_start_position_seqno |
| 80 |
--let $restart_parameters = --wsrep-start-position=$wsrep_recover_start_position_uuid:$wsrep_recover_start_position_seqno |
| 81 |
--source include/start_mysqld.inc |
| 82 |
--source include/wait_wsrep_ready.inc |
| 83 |
|
| 84 |
SELECT VARIABLE_VALUE `expect 6` FROM INFORMATION_SCHEMA.GLOBAL_STATUS WHERE VARIABLE_NAME = 'wsrep_last_committed'; |
| 85 |
|
| 86 |
# |
| 87 |
# Scenario 4 |
| 88 |
# |
| 89 |
# This will cause the following |
| 90 |
# |
| 91 |
# Seqno 7 - the first INSERT is blocked after it is certified but before |
| 92 |
# it gets prepared |
| 93 |
# Seqno 8 - the second INSERT is blocked before it will be ordered for |
| 94 |
# commit, so it becomes prepared |
| 95 |
# |
| 96 |
# As an outcome, the recovery process should return seqno 6 because |
| 97 |
# the range of prepared transactions found after the crash recovery |
| 98 |
# is not continuous up to 8. |
| 99 |
# |
| 100 |
# The expected wsrep_last_committed after server is restarted is 7. |
| 101 |
# |
| 102 |
|
| 103 |
# Send INSERT which will block after certification |
| 104 |
--connect con1, localhost, root |
| 105 |
SET DEBUG_SYNC = "wsrep_after_certification SIGNAL after_certification_reached WAIT_FOR continue"; |
| 106 |
--send INSERT INTO t1 VALUES (7) |
| 107 |
|
| 108 |
--connect con_ctrl, localhost, root |
| 109 |
SET DEBUG_SYNC = "now WAIT_FOR after_certification_reached"; |
| 110 |
|
| 111 |
# Send INSERT which will block before commit order critical section |
| 112 |
--connect con2, localhost, root |
| 113 |
SET DEBUG_SYNC = "wsrep_before_commit_order_enter SIGNAL before_commit_order_reached WAIT_FOR continue"; |
| 114 |
--send INSERT INTO t1 VALUES (8) |
| 115 |
|
| 116 |
--connection con_ctrl |
| 117 |
SET DEBUG_SYNC = "now WAIT_FOR before_commit_order_reached"; |
| 118 |
|
| 119 |
--connection default |
| 120 |
let $restart_noprint=2; |
| 121 |
--source include/kill_mysqld.inc |
| 122 |
--source wsrep-recover-step.inc |
| 123 |
--echo Expect seqno 6 |
| 124 |
--echo $wsrep_recover_start_position_seqno |
| 125 |
--let $restart_parameters = --wsrep-start-position=$wsrep_recover_start_position_uuid:$wsrep_recover_start_position_seqno |
| 126 |
--source include/start_mysqld.inc |
| 127 |
--source include/wait_wsrep_ready.inc |
| 128 |
|
| 129 |
--disconnect con1 |
| 130 |
--disconnect con2 |
| 131 |
--disconnect con_ctrl |
| 132 |
--connection default |
| 133 |
|
| 134 |
SELECT VARIABLE_VALUE `expect 7` FROM INFORMATION_SCHEMA.GLOBAL_STATUS WHERE VARIABLE_NAME = 'wsrep_last_committed'; |
| 135 |
|
| 136 |
# |
| 137 |
# Scenario 5 |
| 138 |
# |
| 139 |
# This scenario will run two INSERTs in parallel so that they are |
| 140 |
# prepared out of order. The execution is stopped before commit |
| 141 |
# and the server is killed. |
| 142 |
# |
| 143 |
# The transactions will be recovered from InnoDB but |
| 144 |
# will be rolled back: |
| 145 |
# - If binlog is on, the binlog acts as a transaction coordinator. |
| 146 |
# The transaction is not logged into binlog, so the transaction is rolled |
| 147 |
# back. |
| 148 |
# - If binlog is not on, the transaction is 1PC and the wsrep XID |
| 149 |
# is not persisted before commit is complete. |
| 150 |
# |
| 151 |
|
| 152 |
--connect con1, localhost, root |
| 153 |
SET DEBUG_SYNC = "wsrep_after_certification SIGNAL after_certification_reached WAIT_FOR continue_after_certification"; |
| 154 |
SET DEBUG_SYNC = "wsrep_before_commit_order_enter SIGNAL before_commit_order_reached_1 WAIT_FOR continue_before_commit_order_1"; |
| 155 |
--send INSERT INTO t1 VALUES (9) |
| 156 |
|
| 157 |
--connect con_ctrl, localhost, root |
| 158 |
SET DEBUG_SYNC = "now WAIT_FOR after_certification_reached"; |
| 159 |
|
| 160 |
--connect con2, localhost, root |
| 161 |
SET DEBUG_SYNC = "wsrep_before_commit_order_enter SIGNAL before_commit_order_reached_2 WAIT_FOR continue_before_commit_order_2"; |
| 162 |
--send INSERT INTO t1 VALUES (10) |
| 163 |
|
| 164 |
--connection con_ctrl |
| 165 |
SET DEBUG_SYNC = "now WAIT_FOR before_commit_order_reached_2"; |
| 166 |
SET DEBUG_SYNC = "now SIGNAL continue_after_certification"; |
| 167 |
SET DEBUG_SYNC = "now WAIT_FOR before_commit_order_reached_1"; |
| 168 |
|
| 169 |
--connection default |
| 170 |
let $restart_noprint=2; |
| 171 |
--source include/kill_mysqld.inc |
| 172 |
--source wsrep-recover-step.inc |
| 173 |
--echo Expect seqno 7 |
| 174 |
|
| 175 |
--echo $wsrep_recover_start_position_seqno |
| 176 |
--let $restart_parameters = --wsrep-start-position=$wsrep_recover_start_position_uuid:$wsrep_recover_start_position_seqno |
| 177 |
--source include/start_mysqld.inc |
| 178 |
--source include/wait_wsrep_ready.inc |
| 179 |
|
| 180 |
--disconnect con1 |
| 181 |
--disconnect con2 |
| 182 |
--disconnect con_ctrl |
| 183 |
--connection default |
| 184 |
|
| 185 |
|
| 186 |
SELECT VARIABLE_VALUE `expect 8` FROM INFORMATION_SCHEMA.GLOBAL_STATUS WHERE VARIABLE_NAME = 'wsrep_last_committed'; |
| 187 |
|
| 188 |
# |
| 189 |
# Final sanity check: The successful inserts into t1 should result single row |
| 190 |
# |
| 191 |
--echo Expect row 5 |
| 192 |
SELECT * FROM t1; |
| 193 |
|
| 194 |
DROP TABLE t1; |