| 1 |
--source include/have_innodb.inc |
| 2 |
--source include/have_debug.inc |
| 3 |
--source include/have_debug_sync.inc |
| 4 |
--source include/have_binlog_format_row.inc |
| 5 |
|
| 6 |
SET @old_max_binlog_size= @@global.max_binlog_size; |
| 7 |
SET GLOBAL max_binlog_size= 4096; |
| 8 |
SET @old_innodb_flush_log_at_trx_commit= @@global.innodb_flush_log_at_trx_commit; |
| 9 |
SET GLOBAL innodb_flush_log_at_trx_commit= 1; |
| 10 |
RESET MASTER; |
| 11 |
|
| 12 |
CREATE TABLE t1 (a INT PRIMARY KEY, b MEDIUMTEXT) ENGINE=Innodb; |
| 13 |
CREATE TABLE t2 (a INT PRIMARY KEY, b MEDIUMTEXT) ENGINE=Myisam; |
| 14 |
|
| 15 |
--echo *** Test that RESET MASTER waits for pending commit checkpoints to complete. |
| 16 |
|
| 17 |
# con1 will hang before doing commit checkpoint, blocking RESET MASTER. |
| 18 |
connect(con1,localhost,root,,); |
| 19 |
SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con1_ready WAIT_FOR con1_go"; |
| 20 |
send INSERT INTO t1 VALUES (1, REPEAT("x", 4100)); |
| 21 |
|
| 22 |
connection default; |
| 23 |
SET DEBUG_SYNC= "now WAIT_FOR con1_ready"; |
| 24 |
# Let's add a few binlog rotations just for good measure. |
| 25 |
INSERT INTO t2 VALUES (1, REPEAT("x", 4100)); |
| 26 |
INSERT INTO t2 VALUES (2, REPEAT("x", 4100)); |
| 27 |
--source include/show_binary_logs.inc |
| 28 |
--let $binlog_file= master-bin.000004 |
| 29 |
--let $binlog_start= 4 |
| 30 |
--source include/show_binlog_events.inc |
| 31 |
SET DEBUG_SYNC= "execute_command_after_close_tables SIGNAL reset_master_done"; |
| 32 |
send RESET MASTER; |
| 33 |
|
| 34 |
connect(con2,localhost,root,,); |
| 35 |
--echo This will timeout, as RESET MASTER is blocked |
| 36 |
SET DEBUG_SYNC= "now WAIT_FOR reset_master_done TIMEOUT 1"; |
| 37 |
# Wake up transaction to allow RESET MASTER to complete. |
| 38 |
SET DEBUG_SYNC= "now SIGNAL con1_go"; |
| 39 |
|
| 40 |
connection con1; |
| 41 |
reap; |
| 42 |
|
| 43 |
connection default; |
| 44 |
reap; |
| 45 |
--source include/show_binary_logs.inc |
| 46 |
--let $binlog_file= master-bin.000001 |
| 47 |
--let $binlog_start= 4 |
| 48 |
--source include/show_binlog_events.inc |
| 49 |
|
| 50 |
--echo *** Test that binlog N is active, and commit checkpoint for (N-1) is |
| 51 |
--echo *** done while there is still a pending commit checkpoint for (N-2). |
| 52 |
|
| 53 |
connection con1; |
| 54 |
SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con1_ready WAIT_FOR con1_continue"; |
| 55 |
send INSERT INTO t1 VALUES (20, REPEAT("x", 4100)); |
| 56 |
|
| 57 |
connection default; |
| 58 |
SET DEBUG_SYNC= "now WAIT_FOR con1_ready"; |
| 59 |
|
| 60 |
connection con2; |
| 61 |
SET DEBUG_SYNC= "commit_after_group_release_commit_ordered SIGNAL con2_ready WAIT_FOR con2_continue"; |
| 62 |
send INSERT INTO t1 VALUES (21, REPEAT("x", 4100)); |
| 63 |
|
| 64 |
connection default; |
| 65 |
SET DEBUG_SYNC= "now WAIT_FOR con2_ready"; |
| 66 |
--source include/show_binary_logs.inc |
| 67 |
--let $binlog_file= master-bin.000001 |
| 68 |
--source include/show_binlog_events.inc |
| 69 |
--let $binlog_file= master-bin.000002 |
| 70 |
--source include/show_binlog_events.inc |
| 71 |
--let $binlog_file= master-bin.000003 |
| 72 |
--source include/show_binlog_events.inc |
| 73 |
|
| 74 |
# We need to sync the test case with the background processing of the |
| 75 |
# commit checkpoint, otherwise we get nondeterministic results. |
| 76 |
SET DEBUG_SYNC= "RESET"; |
| 77 |
SET @old_dbug= @@global.DEBUG_DBUG; |
| 78 |
SET GLOBAL debug_dbug="+d,binlog_background_checkpoint_processed"; |
| 79 |
|
| 80 |
SET DEBUG_SYNC= "now SIGNAL con2_continue"; |
| 81 |
|
| 82 |
connection con2; |
| 83 |
reap; |
| 84 |
|
| 85 |
connection default; |
| 86 |
--echo con1 is still pending, no new binlog checkpoint should have been logged. |
| 87 |
# Make sure commit checkpoint is processed before we check that no checkpoint |
| 88 |
# event has been binlogged. |
| 89 |
SET DEBUG_SYNC= "now WAIT_FOR binlog_background_checkpoint_processed"; |
| 90 |
SET GLOBAL debug_dbug= @old_dbug; |
| 91 |
SET DEBUG_SYNC= "RESET"; |
| 92 |
|
| 93 |
--let $binlog_file= master-bin.000003 |
| 94 |
--source include/show_binlog_events.inc |
| 95 |
|
| 96 |
SET DEBUG_SYNC= "now SIGNAL con1_continue"; |
| 97 |
|
| 98 |
connection con1; |
| 99 |
reap; |
| 100 |
|
| 101 |
connection default; |
| 102 |
|
| 103 |
--echo No commit checkpoints are pending, a new binlog checkpoint should have been logged. |
| 104 |
--let $binlog_file= master-bin.000003 |
| 105 |
|
| 106 |
# Wait for the master-bin.000003 binlog checkpoint to appear. |
| 107 |
--let $wait_for_all= 0 |
| 108 |
--let $show_statement= SHOW BINLOG EVENTS IN "$binlog_file" |
| 109 |
--let $field= Info |
| 110 |
--let $condition= = "master-bin.000003" |
| 111 |
--source include/wait_show_condition.inc |
| 112 |
|
| 113 |
--source include/show_binlog_events.inc |
| 114 |
|
| 115 |
|
| 116 |
--echo *** MDEV-4322: Broken XID counting during binlog rotation *** |
| 117 |
|
| 118 |
# Test that binlog shutdown waits for any pending binlog checkpoints to have time to complete. |
| 119 |
|
| 120 |
connection default; |
| 121 |
# We will use debug_sync to setup a wait inside the background processing |
| 122 |
# of binlog checkpoints. The wait is newer resumed, and will eventually |
| 123 |
# time out. If server shutdown does not wait for checkpoint processing to |
| 124 |
# complete, we will get an assert. |
| 125 |
# |
| 126 |
# It is a bit tricky to inject the wait properly as it has to happen in a |
| 127 |
# background thread during shutdown. So we first inject a DBUG to set the |
| 128 |
# debug_sync wait in the correct thread, then wait to be signalled that |
| 129 |
# the inject happened so that we can remove it again from DBUG (else |
| 130 |
# check_testcase will complain). |
| 131 |
|
| 132 |
SET @old_dbug= @@global.DEBUG_DBUG; |
| 133 |
SET GLOBAL debug_dbug="+d,inject_binlog_background_thread_before_mark_xid_done"; |
| 134 |
|
| 135 |
FLUSH LOGS; |
| 136 |
INSERT INTO t1 VALUES (30, REPEAT("x", 4100)); |
| 137 |
SET DEBUG_SYNC= "now WAIT_FOR injected_binlog_background_thread"; |
| 138 |
SET GLOBAL debug_dbug= @old_dbug; |
| 139 |
INSERT INTO t1 VALUES (31, REPEAT("x", 4100)); |
| 140 |
--source include/show_binary_logs.inc |
| 141 |
SET debug_sync = 'reset'; |
| 142 |
|
| 143 |
SET GLOBAL max_binlog_size= @old_max_binlog_size; |
| 144 |
SET GLOBAL innodb_flush_log_at_trx_commit= @old_innodb_flush_log_at_trx_commit; |
| 145 |
|
| 146 |
--source include/shutdown_mysqld.inc |
| 147 |
--source include/start_mysqld.inc |
| 148 |
|
| 149 |
|
| 150 |
--echo *** MDEV-7402: 'reset master' hangs, waits for signalled COND_xid_list *** |
| 151 |
|
| 152 |
|
| 153 |
connect(con3,localhost,root,,); |
| 154 |
# Make the binlog background thread wait before clearing the pending checkpoint. |
| 155 |
# The bug was that one RESET MASTER would clear the reset_master_pending |
| 156 |
# flag set by another RESET MASTER; this could cause the wakeup from the |
| 157 |
# binlog background thread not to be sent, and thus the second RESET MASTER |
| 158 |
# to wait infinitely. |
| 159 |
SET debug_sync="reset_logs_after_set_reset_master_pending SIGNAL reset_master_ready WAIT_FOR reset_master_cont"; |
| 160 |
send RESET MASTER; |
| 161 |
|
| 162 |
--connection default |
| 163 |
SET @old_dbug= @@global.DEBUG_DBUG; |
| 164 |
SET GLOBAL debug_dbug="+d,inject_binlog_background_thread_before_mark_xid_done"; |
| 165 |
SET debug_sync="now WAIT_FOR reset_master_ready"; |
| 166 |
RESET MASTER; |
| 167 |
SET debug_sync="now WAIT_FOR injected_binlog_background_thread"; |
| 168 |
SET GLOBAL debug_dbug=@old_dbug; |
| 169 |
SET debug_sync="now SIGNAL reset_master_cont"; |
| 170 |
|
| 171 |
--connection con3 |
| 172 |
REAP; |
| 173 |
|
| 174 |
--connection default |
| 175 |
SET debug_sync = 'reset'; |
| 176 |
|
| 177 |
--echo *** MDEV-24660: MYSQL_BIN_LOG::cleanup(): Assertion `b->xid_count == 0' failed in MYSQL_BIN_LOG::cleanup |
| 178 |
# Test a scenario of forcibly rolled back mixed engine "unsafe" transaction |
| 179 |
# at shutdown. That should not let to the assert. |
| 180 |
|
| 181 |
SET @old_max_binlog_size= @@global.max_binlog_size; |
| 182 |
SET GLOBAL max_binlog_size= 4096; |
| 183 |
|
| 184 |
--connect(con_24660,localhost,root,,) |
| 185 |
|
| 186 |
# Construct an unsafe xa transaction that is rolled back |
| 187 |
# in binlog at the shutdown time. That requires STATEMENT binlog format. |
| 188 |
FLUSH LOGS; |
| 189 |
--let $binlog_file = query_get_value(SHOW MASTER STATUS, File, 1) |
| 190 |
SET @@session.binlog_format = STATEMENT; |
| 191 |
CREATE TABLE tm (a INT) ENGINE = myisam; |
| 192 |
|
| 193 |
call mtr.add_suppression("Table './test/tm' is marked as crashed"); |
| 194 |
call mtr.add_suppression("Checking table"); |
| 195 |
|
| 196 |
XA START 'xa1'; |
| 197 |
--let $a = `SELECT a + 1 FROM t1` |
| 198 |
--eval INSERT INTO t1 VALUES ($a, 1) |
| 199 |
INSERT INTO tm SET a = 1; |
| 200 |
--inc $a |
| 201 |
--let $repeat_x = `SELECT REPEAT("x", 4100)` |
| 202 |
--disable_query_log |
| 203 |
--eval INSERT INTO t1 VALUES ($a, "$repeat_x") |
| 204 |
--enable_query_log |
| 205 |
XA END 'xa1'; |
| 206 |
|
| 207 |
--connection default |
| 208 |
# In the patch's base BBT would exit first to win the race against |
| 209 |
# the XA transaction's binloging. |
| 210 |
SET GLOBAL debug_dbug="+d,only_kill_system_threads_no_loop"; |
| 211 |
--source include/shutdown_mysqld.inc |
| 212 |
--source include/start_mysqld.inc |
| 213 |
|
| 214 |
--echo ** Proof of shutdown caused ROLLBACK-completed transaction |
| 215 |
|
| 216 |
--let assert_file=$MYSQLTEST_VARDIR/tmp/binlog_decoded.out |
| 217 |
--let datadir=`select @@datadir` |
| 218 |
|
| 219 |
--echo # MYSQL_BINLOG datadir/binlog_file --result-file=assert_file |
| 220 |
--exec $MYSQL_BINLOG $datadir/$binlog_file --result-file=$assert_file |
| 221 |
|
| 222 |
--let $assert_text= No XA statements should be written into the binary log |
| 223 |
--let $assert_count= 0 |
| 224 |
--let assert_select= XA START|XA END|XA PREPARE|XA COMMIT|XA ROLLBACK |
| 225 |
--source include/assert_grep.inc |
| 226 |
|
| 227 |
--let $assert_text= The transaction should be rolled back |
| 228 |
--let $assert_count= 1 |
| 229 |
--let assert_select= ^ROLLBACK\$ |
| 230 |
--source include/assert_grep.inc |
| 231 |
|
| 232 |
SELECT * FROM tm; |
| 233 |
--eval SELECT * FROM t1 WHERE a = $a |
| 234 |
|
| 235 |
# Clean up. |
| 236 |
DROP TABLE t1, t2, tm; |