| 1 |
Beta Release 0.7.1 (26 September, 2008) |
| 2 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 3 |
|
| 4 |
Version 0.7.0 does not work with reads >63bp at all. I overlooked two |
| 5 |
lines of codes which assume reads are 63bp or shorter. Now I have fixed |
| 6 |
the bug and tested it on simulated long reads. It seems to work fine. I |
| 7 |
am sorry for this obvious bug. No other things are changed since 0.7.0. |
| 8 |
|
| 9 |
(0.7.1: 26 September 2008, r672) |
| 10 |
|
| 11 |
|
| 12 |
|
| 13 |
Beta Release 0.7.0 (21 September, 2008) |
| 14 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 15 |
|
| 16 |
Since this release, MAQ can accept reads no longer than 127bp, instead |
| 17 |
of 63bp in the previous version. This is achieved at the cost of 18% |
| 18 |
slower speed and 16% more peak memory usage. The .map alignment format |
| 19 |
is also changed accordingly, which means the new format is NOT |
| 20 |
compatible with the old format. I will shortly put a converter on the |
| 21 |
MAQ website so that you can convert your alignment done by 0.6.x to the |
| 22 |
new format without redoing the alignment. In addition, you can choose to |
| 23 |
revert to the 63bp version by configure with "--enable-shortreads", but |
| 24 |
this is not recommende. |
| 25 |
|
| 26 |
Furthermore, the NovoCraft developers have implemented a converter that |
| 27 |
converts the NovoCraft alignment format to MAQ's .map format. I |
| 28 |
incorporated their codes into MAQ. NovoCraft can find short indels with |
| 29 |
single-ended reads and have most of major features of MAQ. It is also |
| 30 |
fast and well developed. NovoCraft is a good alternative to MAQ. |
| 31 |
|
| 32 |
In additional to the major changes, here are the other notable changes, |
| 33 |
only a few: |
| 34 |
|
| 35 |
* Improved progress report in maq map. Someone is using MAQ to align |
| 36 |
reads to millions of contigs. The resulting stderr output is even |
| 37 |
larger than the alignment itself. Now contig names will not be |
| 38 |
printed. |
| 39 |
|
| 40 |
* Fixed a segfault in Smith-Waterman alignment. I have not pinpointed |
| 41 |
the line that causes the segfault, but I guess this is caused by a |
| 42 |
rare out-of-boundary event. Anyway, the segfault seems to go away |
| 43 |
after enforcing the boundary check. |
| 44 |
|
| 45 |
Probably MAQ will never go to 0.8.0. Although it is cheap to make MAQ |
| 46 |
align reads up to 255bp, I am not going to do that. When reads go longer |
| 47 |
and longer, MAQ's power will be reduced due to its inability to find |
| 48 |
short indels on single ended reads. I am still experimenting novel |
| 49 |
algorithms for long reads, and BWA, which has been made public, is the |
| 50 |
unfinished product. Although BWA has not been fully developed into a |
| 51 |
comprehensive package like MAQ, it shows the potential to do ultra-fast |
| 52 |
gapped alignment on long reads. The current BWA does global alignment |
| 53 |
(w.r.t reads) for a few hundreds bp of reads by taking first few tens of |
| 54 |
bp as seed. You can find more information on the MAQ website. |
| 55 |
|
| 56 |
(0.7.0: 21 September 2008, r669) |
| 57 |
|
| 58 |
|
| 59 |
|
| 60 |
Beta Release 0.6.8 (27 July, 2008) |
| 61 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 62 |
|
| 63 |
Most of new features in this release are mainly designed for the 1000 |
| 64 |
genome project. For other users, the most obvious change is a bug fix in |
| 65 |
the assemble command. Fixing this bug reduces error dependency |
| 66 |
coefficient from 0.93 to 0.85. The SNP accuracy remains similar to the |
| 67 |
previous version. |
| 68 |
|
| 69 |
Other notable changes include: |
| 70 |
|
| 71 |
* Formally changed the license to GPL version 3. |
| 72 |
|
| 73 |
* Added mapvalidate command, which checks whether an alignment file is |
| 74 |
corrupted. The mapmerge command also does some sanity check when |
| 75 |
merging alignments. |
| 76 |
|
| 77 |
* Support generating GLF format (for the 1000 Genome Project). Codes |
| 78 |
for manipulating GLF files are available in SVN now. |
| 79 |
|
| 80 |
* The mapcheck command can optionally dump additional information for |
| 81 |
quality recalibration (for the 1000 Genome Project). |
| 82 |
|
| 83 |
* Fixed a potential bug in indelpe.cc (thank Vaughn for reporting the |
| 84 |
bug). |
| 85 |
|
| 86 |
* Fixed a potential compiling error in assopt.c (thank Jason for the |
| 87 |
bug report). |
| 88 |
|
| 89 |
* Only dump unmapped reads with `maq map -u'. |
| 90 |
|
| 91 |
* Added more online documentation about how to call SNPs for SOLiD data |
| 92 |
and to call SNPs from pooled samples. |
| 93 |
|
| 94 |
(0.6.8: 27 July 2008, r651) |
| 95 |
|
| 96 |
|
| 97 |
|
| 98 |
Beta Release 0.6.7 (23 June, 2008) |
| 99 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 100 |
|
| 101 |
As promised, MAQ now works with reads from Illumina's long insert-size |
| 102 |
libraries and with reads from samples by pooling multiple |
| 103 |
individuals/strains together. Also in this release, unmapped reads with |
| 104 |
their mates mapped are also stored in the .map alignment file. This |
| 105 |
strategy helps users who do local assembly to find structural |
| 106 |
variations. |
| 107 |
|
| 108 |
Other notable changes are: |
| 109 |
|
| 110 |
* In indelpe, fixed a bug about the position of an insertion. |
| 111 |
Previously, the output position is 1bp-away from the true position. |
| 112 |
|
| 113 |
* In indelpe, output addition information about indels, which also |
| 114 |
helps to tell whether the indel is homozygous or heterozygous. |
| 115 |
|
| 116 |
* In SNPfilter, integrated the consensus quality filter. Previously, |
| 117 |
this has to be done with an awk command. |
| 118 |
|
| 119 |
* In SNPfilter and easyrun, improved the consensus quality filter. This |
| 120 |
is particularly important for SNP calling on pooled samples. |
| 121 |
|
| 122 |
* Added command to detect correputed .map files. |
| 123 |
|
| 124 |
* In mapcheck, optionally output additional information for mapping |
| 125 |
based quality calibration. |
| 126 |
|
| 127 |
(0.6.7: 23 June 2008, r631) |
| 128 |
|
| 129 |
|
| 130 |
|
| 131 |
Beta Release 0.6.6 (27 April, 2008) |
| 132 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 133 |
|
| 134 |
Two new features are added to this release. First, cns2fq now gives |
| 135 |
regions where maq believes SNPs can be called confidentially. Second, |
| 136 |
maq can optionally dump all perfect or 1-mismatch hits to a separate |
| 137 |
file. Maq cannot make use of information of multiple hits, but I can see |
| 138 |
outputing these hits may help people who do expressional profiling. |
| 139 |
|
| 140 |
No bugs are fixed in this release and therefore people do not need to |
| 141 |
update unless using the new features. |
| 142 |
|
| 143 |
In the next release, maq will support read alignment for Illumina's long |
| 144 |
insert-size library which has different read orientation for a read |
| 145 |
pair. I will also try to implement a SNP caller for pooled sample. |
| 146 |
|
| 147 |
(0.6.6: 27 April 2008, r602) |
| 148 |
|
| 149 |
|
| 150 |
|
| 151 |
Beta Release 0.6.5 (28 March, 2008) |
| 152 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 153 |
|
| 154 |
This is mainly a bug fix release. |
| 155 |
|
| 156 |
* Fixed bug: read names longer than 35 characters will not be stored in |
| 157 |
the alignment file. Command rmdup for PE data will also be affected |
| 158 |
when reads have no names. Short read names will not cause any |
| 159 |
problems. This bug is specific to 0.6.4. |
| 160 |
|
| 161 |
* Fixed bug: reference shorter than 3bp will cause malformed consensus |
| 162 |
file. This bug is specific to 0.6.4. |
| 163 |
|
| 164 |
* Fixed bug: potential memory violation in indelsoa. This rare bug |
| 165 |
affects all 0.6.x series. |
| 166 |
|
| 167 |
* Fixed bug: potential memory violation in simulate when the reference |
| 168 |
is short. This bug is rare if reference sequences are all long. All |
| 169 |
0.6.x will be affected. |
| 170 |
|
| 171 |
In addition to the bug fixes, I also finished SOLiD support in this |
| 172 |
release. A new script solid2fastq.pl is introduced to convert SOLiD read |
| 173 |
format to FASTQ format accepted by maq. Furthermore, maq is able to |
| 174 |
convert color alignment to nucleotide alignment with inferred nucleotide |
| 175 |
base qualities. Nucleotide consensus and SNPs can be generated with |
| 176 |
assemble in the standard way. There are still some room left for further |
| 177 |
improvement. I will work on it in future. |
| 178 |
|
| 179 |
Another change is in the new release, the insert size of a read pair is |
| 180 |
measured between the 1st cycle of both reads in the pair, no matter |
| 181 |
whether they are mapped as a proper pair or not. Defining insert size in |
| 182 |
this way may be more conceptually consistent. Note that this change will |
| 183 |
not affect properly aligned Solexa reads at all, but will slightly |
| 184 |
affect SOLiD PE reads. |
| 185 |
|
| 186 |
I am really sorry for these bugs in maq and hope the new version is more |
| 187 |
stable. |
| 188 |
|
| 189 |
(0.6.5: 28 March 2008, r578) |
| 190 |
|
| 191 |
|
| 192 |
|
| 193 |
Beta Release 0.6.4 (15 March, 2008) |
| 194 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 195 |
|
| 196 |
Maq is now 90% faster on human alignment. This acceleraion is partly |
| 197 |
achieved by extensive code optimization and partly by using 28bp seed, |
| 198 |
instead of 24bp in previous versions, in the alignment. As both the |
| 199 |
Sanger Inst. and Illumina company have greatly improved the data |
| 200 |
quality, using 28bp seed does not affect the final SNP accuracy. If |
| 201 |
users still intend to use 24bp seed like before, they should compile maq |
| 202 |
with "./configure --enable-slowmap". The online binaries are compilied |
| 203 |
with 28bp seed. |
| 204 |
|
| 205 |
It is important to note that Illumina/Solexa sequencing may produce many |
| 206 |
false polyA at the edges of a tile. These polyA artefacts may greatly |
| 207 |
increase the running time of maq. Users are advised to remove these |
| 208 |
artefacts with their own scripts before alignment. For the moment maq |
| 209 |
does not provide a general functionality for filtering polyA. |
| 210 |
|
| 211 |
From this version, the names of a pair of reads can be different at the |
| 212 |
tailing "/1" or "/2". For example, "read0001/1" and "read0001/2" are |
| 213 |
allowed for a read pair. In this way, the two reads in a pair can be |
| 214 |
discriminated in the mapview output. |
| 215 |
|
| 216 |
Another important change is the consensus calling model. I noticed a |
| 217 |
theoretical flaw in the statistical model behind. The sequencing errors |
| 218 |
seem to be more independent when I fixed the flaw and therefore the |
| 219 |
error dependency coefficient is increased to 0.93 by default. The final |
| 220 |
SNP accuracy is about the same as the previous version. |
| 221 |
|
| 222 |
I also improved the SOLiD support in this version. A script is provided |
| 223 |
for converting SOLiD colour reads to the maq fastq. Mate-pair SOLiD |
| 224 |
reads can also be correctly aligned. For a SOLiD read pair, the correct |
| 225 |
orientation should be F3_reverse-R3_reverse or R3_forward-F3_forward. I |
| 226 |
did not know this before. |
| 227 |
|
| 228 |
Other notable changes include: |
| 229 |
|
| 230 |
* Assemble now calculates minimum neighbouring quality in the 7bp |
| 231 |
window surrounding the current position. SNPfilter will filter |
| 232 |
unreliable SNPs based on the information. This idea is inspired by |
| 233 |
NQS (Neighbourhood Quality Standard). |
| 234 |
|
| 235 |
* Optionally store mismatching positions in .map file. The trade-off is |
| 236 |
the maximum read length is 55bp when this option is switched on. |
| 237 |
|
| 238 |
* Fixed an ever existing bug in PE alignment. Now about 1% more |
| 239 |
properly aligned pairs can be found. |
| 240 |
|
| 241 |
* Added paf_utils.pl script. This script parses soap, eland, rmap and |
| 242 |
maq alignment formats to the same format. It also presents an example |
| 243 |
about how to read/write maq's binary .map format with Perl. |
| 244 |
|
| 245 |
* Added support for converting Bustard output (_prb.txt and _seq.txt) |
| 246 |
in fq_all2std.pl. However, users should avoid using Bustard output at |
| 247 |
best. Gerald output is always better. |
| 248 |
|
| 249 |
* "Alternative mapping quality" in mapview is now the lower SE mapping |
| 250 |
quality of the two ends. Previously this does not stand for properly |
| 251 |
paired reads. |
| 252 |
|
| 253 |
* Filter polyA in reads, only for data generated by the Sanger |
| 254 |
Institute. Note that maq can be several times SLOWER if there are a |
| 255 |
lot of polyA artefacts in the reads. |
| 256 |
|
| 257 |
* Pileup can optionally output base position on the read. |
| 258 |
|
| 259 |
* Maq now trims long adapter contamination before alignment and trims |
| 260 |
short adapter contamination after the alignment. |
| 261 |
|
| 262 |
* Submap now works as a filter on .map file. Users should always |
| 263 |
extract the reads in a region with maqindex in the maqview package. |
| 264 |
|
| 265 |
* Updated mapstat command. |
| 266 |
|
| 267 |
* Fixed a bug in easyrun about relative paths. |
| 268 |
|
| 269 |
* Fixed a bug in fasta2csfasta. |
| 270 |
|
| 271 |
* Fixed a rare bug in calculating the distance of a pair. |
| 272 |
|
| 273 |
* Fixed a rare bug in determining the boundary of Smith-Waterman |
| 274 |
alignment. |
| 275 |
|
| 276 |
* Added asub, a generic script for submitting array jobs on LSF/SGE. |
| 277 |
Added maq_sanger.pl, a script for running maq at the Sanger Inst. |
| 278 |
|
| 279 |
I will work on variants calling for multiple samples and further improve |
| 280 |
SOLiD support in future versions. To find the latest development of maq, |
| 281 |
please check out: |
| 282 |
|
| 283 |
svn co https://maq.svn.sourceforge.net/svnroot/maq/branches/lh3/maq |
| 284 |
|
| 285 |
(0.6.4: 15 March 2008, r537) |
| 286 |
|
| 287 |
|
| 288 |
|
| 289 |
Beta Release 0.6.3 (3 January, 2008) |
| 290 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 291 |
|
| 292 |
Again, most changes happened in auxilliary commands. Simulation and Perl |
| 293 |
scripts were improved a lot. |
| 294 |
|
| 295 |
Changes and bug fixes include: |
| 296 |
|
| 297 |
* Added diploid simulation mode. Given a haploid reference sequence, |
| 298 |
maq can generate a diploid sequence and add variants to both |
| 299 |
haploids. |
| 300 |
|
| 301 |
* In 'easyrun', automatically input split FASTQ. Users do not need to |
| 302 |
split the input by themselves. |
| 303 |
|
| 304 |
* Paired end reads can be used with 'easyrun'. |
| 305 |
|
| 306 |
* Added 'snpreg' command, which roughly calculates the size of regions |
| 307 |
where SNPs can be called. |
| 308 |
|
| 309 |
* Added 'simucns' command, which evaluates the accuracy of consensus |
| 310 |
mapping qualities from simulated read alignment. |
| 311 |
|
| 312 |
* Addd 'demo' command to maq.pl. It demonstrates how to simulate reads, |
| 313 |
to use easyrun and to evaluate the result with maq_eval.pl. |
| 314 |
|
| 315 |
* In 'maq map', set flag 18 for a read whose mate mapped with the |
| 316 |
Smith-Waterman algorithm as paired. |
| 317 |
|
| 318 |
Maq has several companion scripts and consists of many commands, but not |
| 319 |
all of them are well documented. I will gradually improve the |
| 320 |
documentations, especially those useful to endusers. In addition, not |
| 321 |
all maq functionalities are fully optimized. Advanced users may want to |
| 322 |
implement in their own ways. I would also like to improve Maq if you |
| 323 |
have better ideas. |
| 324 |
|
| 325 |
(0.6.3: 3 January 2008, r466) |
| 326 |
|
| 327 |
|
| 328 |
|
| 329 |
Beta Release 0.6.2 (23 November, 2007) |
| 330 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 331 |
|
| 332 |
Most changes in this release happened in auxilliary commands instead of |
| 333 |
key commands. Except for random factors, the 0.6.2 alignment and |
| 334 |
consensus should be almost identical to those resultant from 0.6.1. |
| 335 |
|
| 336 |
Other changes and bug fixes include: |
| 337 |
|
| 338 |
* Added an option to dump unmapped reads to a separate file. Users can |
| 339 |
study why these reads cannot be aligned. |
| 340 |
|
| 341 |
* Implemented `export2maq' commands which converts Illumina's in-house |
| 342 |
Export format to maq's ".maq" binary format. Genotype calling is |
| 343 |
supported because the Export format contains mapping qualities of |
| 344 |
reads. |
| 345 |
|
| 346 |
* Implemented `eland2maq' command which convert alignments in an Eland |
| 347 |
output to Maq's ".map" format. Genotype calling is not defected due |
| 348 |
to the lack of qualities. |
| 349 |
|
| 350 |
* Made `indelsoa' command available to end users. This command |
| 351 |
implements a state-of-art homozygous break point detector for |
| 352 |
single-end reads. However, this command mainly aims to faciliate SNP |
| 353 |
filtering around break points instead of finding all the indels. The |
| 354 |
`indelpe' command always works better. |
| 355 |
|
| 356 |
* Made most of commands recognize `-' as the standard input or standard |
| 357 |
output. This may help stream-based pipeline. |
| 358 |
|
| 359 |
* Restored the `-m' option in `pileup' and `assemble' commands. Some |
| 360 |
users regard this to be useful. |
| 361 |
|
| 362 |
* Added fq_all2std.pl, a script to convert various read formats to the |
| 363 |
standard/Sanger FASTQ format. |
| 364 |
|
| 365 |
* Improved the rules in filtering SNPs and allowed to filter out SNPs |
| 366 |
beside potential indel sites. |
| 367 |
|
| 368 |
* Fixed a bug again in bisulfite alignment mode. This is to meet a |
| 369 |
user's request. I have not tried it on real data. |
| 370 |
|
| 371 |
* Added functionalities to evaluate indels in maq_eval.pl. |
| 372 |
|
| 373 |
* Improved `fastq2bfq' command in both maq and maq.pl to make them |
| 374 |
easier to use. |
| 375 |
|
| 376 |
* Fixed a weird compiling error for some powperpc64-linux machines. |
| 377 |
|
| 378 |
(0.6.2: 23 November 2007, r428) |
| 379 |
|
| 380 |
|
| 381 |
|
| 382 |
Beta Release 0.6.1 (3 October, 2007) |
| 383 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 384 |
|
| 385 |
This is mainly a bugfix release. All of the bugs are minor or happen |
| 386 |
rarely. End users may not observe obvious changes in their results. You |
| 387 |
do not really need to re-align the reads with this version unless you |
| 388 |
feel uncomfortable with any trivial bugs. |
| 389 |
|
| 390 |
The changes and bug fixes include: |
| 391 |
|
| 392 |
* In this release, a read is mapped to the position where the sum of |
| 393 |
quality values of mismatched bases is approximately minimum. |
| 394 |
|
| 395 |
* Zero quality will be changed to one in `fastq2bfq'. This is because |
| 396 |
zero-quality bases will be regarded as `N' in alignment. |
| 397 |
|
| 398 |
* Fixed a bug in adapter trimming. The preious version does not work |
| 399 |
properly. |
| 400 |
|
| 401 |
* Fixed a very rare bug in `assemble' and `pileup'. It may lead to |
| 402 |
false zero depth at some sites (about 1 in 1,000,000 sites). |
| 403 |
|
| 404 |
* Fixed a bug for bisulfite alignment mode. This mode has not been |
| 405 |
thoroughly tested, though. |
| 406 |
|
| 407 |
(0.6.1: 3 October 2007, r333) |
| 408 |
|
| 409 |
|
| 410 |
|
| 411 |
Beta Release 0.6.0 (5 September, 2007) |
| 412 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 413 |
|
| 414 |
This is a release with several bleeding-edge modifications which |
| 415 |
jeopardized the stability of maq. Thorough testing has been done to make |
| 416 |
sure maq works properly and that is why this release is delayed. |
| 417 |
|
| 418 |
In this new release, maq allows more mismatches after the first 24bp of |
| 419 |
a read. Trimming low-quality 3'-end of reads is usually not necessary |
| 420 |
any more. In particular, maq does not recommend to trim reads |
| 421 |
recursively because this will affect the accuracy of mapping qualities. |
| 422 |
|
| 423 |
Furthermore, since this release, maq is able to find short indels with |
| 424 |
paired end (PE) reads. As Illumina's PE protocol will become standard in |
| 425 |
the near future, this indel detector will play its role. |
| 426 |
|
| 427 |
Other notable changes include: |
| 428 |
|
| 429 |
* Changed ".map" binary format. The number of mismatches of the second |
| 430 |
best hit is replaced by the sum of errors of the best hit. The |
| 431 |
distance between the pair now equals to the outer distance. Reads |
| 432 |
with indels are also stored in the ".map" files. The mapview output |
| 433 |
is changed accordingly. |
| 434 |
|
| 435 |
* Added the number of 0- and 1-mismatch hits to the mapview output. |
| 436 |
|
| 437 |
* Rewrote rmdup command. This command now keeps all abnormal pairs as |
| 438 |
well as reads with indels. |
| 439 |
|
| 440 |
* Made simulate command generate reads on both strands. Previously |
| 441 |
read1 always come from the forward strand and read2 from the reverse |
| 442 |
strand. |
| 443 |
|
| 444 |
* Allowed to change the average MAF for heterozygous sites. This may |
| 445 |
help for pooled sample, but it has not been evaluated. |
| 446 |
|
| 447 |
* Improved 3'-adapter trimming. Fully contaiminated reads can be |
| 448 |
detected now. |
| 449 |
|
| 450 |
In this release, I am trying to stablize the alignment part and hope the |
| 451 |
alignment file generated by maq-0.6.0 can be compatible with later |
| 452 |
releases. Furthermore, maq is moving towards the first formal release |
| 453 |
1.0.0. In the near future, I will also try to stablize the entire code |
| 454 |
instead of testing new features frequently. |
| 455 |
|
| 456 |
(0.6.0: 5 September 2007, r249) |
| 457 |
|
| 458 |
|
| 459 |
|
| 460 |
Beta Release 0.5.1 (31 July, 2007) |
| 461 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 462 |
|
| 463 |
All the notable changes include: |
| 464 |
|
| 465 |
* Bugfix in `map': fixed a bug which will lead to wrong alignment when |
| 466 |
two similar regions having identical coordinates but on different |
| 467 |
references. This bug can be dated back to the first piece of codes of |
| 468 |
maq. |
| 469 |
|
| 470 |
* Bugfix in `map' paired end alignment: fixed a bug which will lead to |
| 471 |
wrong alignment when there are two good hits in a small region. |
| 472 |
|
| 473 |
* New feature `simulate': a sophisticated paired end read simulator has |
| 474 |
been implemented. It builds an order-one Markov chain and trains |
| 475 |
parameters from real read data. The simulator is able to generate |
| 476 |
reads with quality distribution quite similar to real ones. In |
| 477 |
addition, three parameter sets will be provided with Maq. Endusers |
| 478 |
can simulate realistic reads even without any real data. |
| 479 |
|
| 480 |
* New feature `rmdup': remove read pairs with identical outer |
| 481 |
coordinates. Doing this may improve the SNP accuracy in practice. |
| 482 |
|
| 483 |
* Since this release, the main documentation will be maintained in a |
| 484 |
man page. PDF version will also come with Maq distributions. |
| 485 |
|
| 486 |
(0.5.1: 31 July 2007, r213) |
| 487 |
|
| 488 |
|
| 489 |
|
| 490 |
Beta Release 0.5.0 (13 July, 2007) |
| 491 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 492 |
|
| 493 |
From this release, this program is formally renamed as `maq', which |
| 494 |
stands for Mapping and Assembly with Qualities. The version number still |
| 495 |
follows the previous series. |
| 496 |
|
| 497 |
In addition to the name of the program, another major change in this |
| 498 |
release is the format of the maq alignment file. In response to the |
| 499 |
request of several users, read names will be stored in the alignment |
| 500 |
file. The mapview output is also revised accordingly. |
| 501 |
|
| 502 |
Other notable changes and bug fixes in this release include: |
| 503 |
|
| 504 |
* Bugfix in `maq.pl': follow symbolic links. |
| 505 |
|
| 506 |
* New feature `maq_plot.pl': plot read depth and abnormal read pairs |
| 507 |
along the reference. |
| 508 |
|
| 509 |
* New feature in `maq.pl': `SNPfilter' command to rule out unreliable |
| 510 |
SNPs. |
| 511 |
|
| 512 |
* New feature in `maq.pl': more analyses added to `easyrun'. |
| 513 |
|
| 514 |
(0.5.0: 13 July 2007, r171) |
| 515 |
|
| 516 |
|
| 517 |
|
| 518 |
Beta Release 0.4.3 (4 July, 2007) |
| 519 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 520 |
|
| 521 |
In this new release, several bugs are fixed and a number of minor |
| 522 |
features are implemented. |
| 523 |
|
| 524 |
* Bugfix in 'mapass2.pl easyrun': fixed bugs when multiple read files |
| 525 |
are provided on the command line. |
| 526 |
|
| 527 |
* New feature: allow to use single-end mapping quality in several |
| 528 |
commands. By default, mapass2 will use paired end mapping qualities |
| 529 |
if reads are paired. However, I found this quality is sometimes |
| 530 |
overestimated. It is good to check what the difference between the |
| 531 |
results of the two type of mapping qualities. |
| 532 |
|
| 533 |
* Bugfix in 'mapcheck': fixed an integer overflow and skipped 'N' |
| 534 |
regions in calculating the average depth. |
| 535 |
|
| 536 |
* Bugfix in paired end alignment: fixed wrong coordinates for 0.03% or |
| 537 |
paired reads. Single end alignment will not be affected. |
| 538 |
|
| 539 |
* New feature in 'match': when '-N' is flagged, more alignment |
| 540 |
information will be dumped to the stderr. |
| 541 |
|
| 542 |
(0.4.3: 4 July 2007, r148) |
| 543 |
|
| 544 |
|
| 545 |
|
| 546 |
Beta Release 0.4.2 (21 June, 2007) |
| 547 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 548 |
|
| 549 |
Several people were asking me to output the name of each mapped |
| 550 |
read. Now here it is. You can tune this feature on by: |
| 551 |
|
| 552 |
mapass2 match -N out.map ref.bfa reads.bfq 2>out.log |
| 553 |
|
| 554 |
The read name, reference seqname, position, strand, paired mapping |
| 555 |
quality, single mapping quality and mismatched bases will be printed on |
| 556 |
stderr. This option `-N' should only be used in debugging. It will cost |
| 557 |
more memory and diskspace as well. |
| 558 |
|
| 559 |
That is all. People who do not need this feature can stick to 0.4.1. |
| 560 |
|
| 561 |
(0.4.2: 21 June 2007, r130) |
| 562 |
|
| 563 |
|
| 564 |
|
| 565 |
Beta Release 0.4.1 (17 June, 2007) |
| 566 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 567 |
|
| 568 |
This is mainly a bug fix release. All users are recommended to |
| 569 |
update. New features and bug fixes include: |
| 570 |
|
| 571 |
* New command `sol2sanger': convert Solexa FASTQ to Sanger/standard |
| 572 |
FASTQ format. The difference between the two formats is how the |
| 573 |
qualities are scaled. |
| 574 |
|
| 575 |
* New command `bfq2fastq': convert mapass' binary FASTQ format to |
| 576 |
standard FASTQ. |
| 577 |
|
| 578 |
* Bugfix in `cns2win': fixed wrong report when chr is not specified on |
| 579 |
the command line. |
| 580 |
|
| 581 |
* Bugfix in `mapcheck': complemented bases on the reverse strand. |
| 582 |
|
| 583 |
(0.4.1: 17 June 2007, r124) |
| 584 |
|
| 585 |
|
| 586 |
|
| 587 |
Beta Release 0.4.0 (15 May, 2007) |
| 588 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 589 |
|
| 590 |
One week after the last release, 0.4.0 comes out. Several improvements |
| 591 |
make this release different from the previous ones: |
| 592 |
|
| 593 |
* New consensus base calling model. Although updating model frequently |
| 594 |
happens in the development of mapass2, this one is different. It is |
| 595 |
the first model that can satisfy me. All previous models make me feel |
| 596 |
uncomfortable in a way or another. However, good theory does not |
| 597 |
always mean better performance. The new model only improve the |
| 598 |
accuracy by less than 1 percent. |
| 599 |
|
| 600 |
* Preliminary functions to process SOLiD data. This is the first the |
| 601 |
release that is able to process AB SOLiD data. The current strategy |
| 602 |
cannot fully make use of all the colour information that is unique to |
| 603 |
SOLiD data, but it is good enough to study the strength and weakness |
| 604 |
of SOLiD data. I may improve these functions when SOLiD becomes more |
| 605 |
stable. It is being improved. |
| 606 |
|
| 607 |
* Use of the GNU build systems. Mapass2 is better compiled with 64bit |
| 608 |
support. The GNU build systems make this easier. Apple universal |
| 609 |
binaries can be compiled, too. Although I still quite like to write |
| 610 |
Makefile by myself, I think to use a more sophisticated method is the |
| 611 |
right way to go. This is the first time I have tried this. |
| 612 |
|
| 613 |
* Considerable codes clean up and minor improvements in assembling |
| 614 |
related parts. |
| 615 |
|
| 616 |
Beginning with this release, I will probably not release mapass2 so |
| 617 |
frequently as what happened in the past three weeks. Although I am not |
| 618 |
entirely satisfied with the accuracy of current performance, I am happy |
| 619 |
with the whole theory behind and the practical usefulness of mapass2. I |
| 620 |
am sure mapass2 is one of the best softwares to map and assemble short |
| 621 |
reads. |
| 622 |
|
| 623 |
(0.4.0: 15 May 2007, r114) |
| 624 |
|
| 625 |
|
| 626 |
|
| 627 |
Beta Release 0.3.1 (9 May, 2007) |
| 628 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 629 |
|
| 630 |
This is a release with minor revisions. The consensus calling model is |
| 631 |
modified slightly which, unfortunately, decreases the accuracy by about |
| 632 |
1%. However, I will stick to it anyway because it is more concise and |
| 633 |
correct in theory. Actually, there is a bug when I was implementing the |
| 634 |
old model. |
| 635 |
|
| 636 |
Other changes include: |
| 637 |
|
| 638 |
* Add `subpos' command: extract a required subset from .cns file |
| 639 |
|
| 640 |
* Improve `pileup' output by making it more informative and allowing to |
| 641 |
extract a required subset. |
| 642 |
|
| 643 |
* Fix two bugs: one in k-small and the other in `mapcheck'. These are |
| 644 |
trivial, though. |
| 645 |
|
| 646 |
(0.3.1: 9 May 2007, r94) |
| 647 |
|
| 648 |
|
| 649 |
|
| 650 |
Beta Release 0.3.0 (3 May, 2007) |
| 651 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 652 |
|
| 653 |
A new release comes out. Consensus calling model has been improved a |
| 654 |
little. Read-pair quality can be calculated more precisely. More |
| 655 |
commands are added to facilitate subsequent analyses. Detailed |
| 656 |
improvements and fixes are: |
| 657 |
|
| 658 |
* Alternative model for consensus base calling. The new model does not |
| 659 |
outperform the old one, but it tend to be more correct in theory and |
| 660 |
more flexible. |
| 661 |
|
| 662 |
* Improved model for read-pair quality. This fixes possible |
| 663 |
overestimation when a pair can be mapped to several places with |
| 664 |
correct orientation and distance. Note that the default parameter |
| 665 |
should be adjusted in some cases. For chrX data, I suggest to apply |
| 666 |
"-t 0.8". |
| 667 |
|
| 668 |
* Reference based consesus calling (RBCC). Call the consensus based on |
| 669 |
dbSNP information. Adjust the prior at the dbSNP sites. This is kind |
| 670 |
of cheating, but it does help to improve the final SNP calls. |
| 671 |
|
| 672 |
* Informative mapcheck. Command 'mapcheck' now outputs more |
| 673 |
information. It is also integrated to 'mapass2.pl'. |
| 674 |
|
| 675 |
* Fastq2bfq in batch mode. This function converts or organizes all the |
| 676 |
fastq files in a directory. 'farm-run.pl' script can be easily |
| 677 |
applied to the resultant directory structure. |
| 678 |
|
| 679 |
* A few bug fixes. |
| 680 |
|
| 681 |
(0.3.0: 3 May 2007, r86) |
| 682 |
|
| 683 |
|
| 684 |
|
| 685 |
Beta Release 0.2.1 (23 April, 2007) |
| 686 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 687 |
|
| 688 |
This is mainly a bug fix release. The previous version cannot give |
| 689 |
correct results when there are two or more reference sequences. I am |
| 690 |
sorry for this obvious bug. Further improvements include: |
| 691 |
|
| 692 |
* Add `mapcheck' command. This command counts observed substitutions on |
| 693 |
reads with respect to the reference. It helps to check the systematic |
| 694 |
bias conatined in reads. |
| 695 |
|
| 696 |
* Consensus can be assembled from one sequence. Previously, all the |
| 697 |
consensus must be assembled together. |
| 698 |
|
| 699 |
(0.2.1: 23 April 2007, r67) |
| 700 |
|
| 701 |
|
| 702 |
|
| 703 |
Beta Release 0.2.0 (22 April, 2007) |
| 704 |
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| 705 |
|
| 706 |
This is the first release of mapass2, a program that maps |
| 707 |
Illumina/Solexa reads to the reference and calls the consensus. This |
| 708 |
program has been tested on real large-scale data. It is one of the few |
| 709 |
softwares that is able to handle these huge amount of data efficiently |
| 710 |
and accurately. |
| 711 |
|
| 712 |
(0.2.0: 22 April 2007, r60) |
| 713 |
|
| 714 |
|