Debian Codegraph @

upstream/opensuse-tumbleweed/man1/xrandr.1

raw
1 .\"
2 .\" Copyright 2001 Keith Packard
3 .\"
4 .\" Permission to use, copy, modify, distribute, and sell this software and its
5 .\" documentation for any purpose is hereby granted without fee, provided that
6 .\" the above copyright notice appear in all copies and that both that
7 .\" copyright notice and this permission notice appear in supporting
8 .\" documentation, and that the name of Keith Packard not be used in
9 .\" advertising or publicity pertaining to distribution of the software without
10 .\" specific, written prior permission. Keith Packard makes no
11 .\" representations about the suitability of this software for any purpose. It
12 .\" is provided "as is" without express or implied warranty.
13 .\"
14 .\" KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
15 .\" INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
16 .\" EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
17 .\" CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
18 .\" DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
19 .\" TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
20 .\" PERFORMANCE OF THIS SOFTWARE.
21 .\"
22 .TH XRANDR 1 2025-04-15 "xrandr 1.5.4" "X Version 11"
23 .SH NAME
24 xrandr - adjust size, orientation, reflection of a screen
25 (using RandR extension)
26 .SH SYNOPSIS
27 .nf
28 \fBxrandr\fP \
29 [\fB\-\-help\fP] \
30 [\fB\-\-display\fP \fIdisplay\fP] \
31 [\fB\-q\fP] [\fB\-v\fP] \
32 [\fB\-\-verbose\fP] \
33 [\fB\-\-dryrun\fP]
34 [\fB\-\-screen\fP \fIsnum\fP] \
35 [\fB\-\-q1\fP] \
36 [\fB\-\-q12\fP] \
37 [\fB\-\-current\fP] \
38 [\fB\-\-noprimary\fP]
39 [\fB\-\-panning\fP \fIwidth\fPx\fIheight\fP[+\fIx\fP+\fIy\fP\:\
40 [/\fItrack_width\fPx\fItrack_height\fP+\fItrack_x\fP+\fItrack_y\fP\:\
41 [/\fIborder_left\fP/\fIborder_top\fP/\fIborder_right\fP/\fIborder_bottom\fP]]]]
42 [\fB\-\-scale\fP \fIx\fP[x\fIy\fP]] \
43 [\fB\-\-scale\-from\fP \fIw\fPx\fIh\fP] \
44 [\fB\-\-transform\fP \fIa\fP,\fIb\fP,\fIc\fP,\fId\fP,\fIe\fP,\fIf\fP,\fIg\fP,\fIh\fP,\fIi\fP]
45 [\fB\-\-primary\fP] \
46 [\fB\-\-prop\fP] \
47 [\fB\-\-fb\fP \fIwidth\fPx\fIheight\fP] \
48 [\fB\-\-fbmm\fP \fIwidth\fPx\fIheight\fP]
49 [\fB\-\-dpi\fP \fIdpi\fP] \
50 [\fB\-\-dpi\fP \fIfrom-output\fP]
51 [\fB\-\-newmode\fP \fIname\fP \fImode\fP] \
52 [\fB\-\-rmmode\fP \fIname\fP] \
53 [\fB\-\-addmode\fP \fIoutput\fP \fIname\fP]
54 [\fB\-\-delmode\fP \fIoutput\fP \fIname\fP] \
55 [\fB\-\-output\fP \fIoutput\fP] \
56 [\fB\-\-auto\fP] \
57 [\fB\-\-mode\fP \fImode\fP]
58 [\fB\-\-preferred\fP] \
59 [\fB\-\-pos\fP \fIx\fPx\fIy\fP] \
60 [\fB\-\-rate\fP \fIrate\fP]
61 [\fB\-\-reflect\fP \fIreflection\fP] \
62 [\fB\-\-rotate\fP \fIorientation\fP]
63 [\fB\-\-left\-of\fP \fIoutput\fP] \
64 [\fB\-\-right\-of\fP \fIoutput\fP]
65 [\fB\-\-above\fP \fIoutput\fP] \
66 [\fB\-\-below\fP \fIoutput\fP] \
67 [\fB\-\-same-as\fP \fIoutput\fP]
68 [\fB\-\-set\fP \fIproperty\fP \fIvalue\fP] \
69 [\fB\-\-off\fP] \
70 [\fB\-\-crtc\fP \fIcrtc\fP]
71 [\fB\-\-gamma\fP \fIred\fP[:\fIgreen\fP:\fIblue\fP]] \
72 [\fB\-\-brightness\fP \fIbrightness\fP]
73 [\fB\-o\fP \fIorientation\fP] \
74 [\fB\-s\fP \fIsize\fP] \
75 [\fB\-r\fP \fIrate\fP] \
76 [\fB\-x\fP] [\fB\-y\fP]
77 [\fB\-\-listproviders\fP] \
78 [\fB\-\-setprovideroutputsource\fP \fIprovider\fP \fIsource\fP]
79 [\fB\-\-setprovideroffloadsink\fP \fIprovider\fP \fIsink\fP]
80 [\fB\-\-listmonitors\fP] \
81 [\fB\-\-listactivemonitors\fP]
82 [\fB\-\-setmonitor\fP \fIname\fP \fIgeometry\fP \fIoutputs\fP] \
83 [\fB\-\-delmonitor\fP \fIname\fP]
84 .SH DESCRIPTION
85 .B Xrandr
86 is used to set the size, orientation, and/or reflection of the outputs for a
87 screen.
88 It can also set the size of the overall screen.
89 .PP
90 If invoked without any option, it will dump the state of the outputs,
91 showing the existing modes for each of them, with a \&'+' after the preferred
92 modes and a \&'*' after the current mode.
93 .PP
94 There are a few global options.
95 Other options modify the last output that is
96 specified in earlier parameters in the command line.
97 Multiple outputs may be modified at the same time by passing
98 multiple \fB\-\-output\fP options followed
99 immediately by their corresponding modifying options.
100 .IP \fB\-\-help\fP
101 Print out a summary of the usage and exit.
102 .IP "\fB\-v\fP, \fB\-\-version"
103 Print out the RandR version reported by the X server and exit.
104 .IP \fB\-\-verbose\fP
105 Causes xrandr to be more verbose. When used with \fB\-q\fP (or without other
106 options), xrandr will display more information about the server state.
107 Please note that the gamma and brightness information are only
108 approximations of the complete color profile stored in the server.
109 When used along with options that reconfigure the system,
110 progress will be reported while executing the configuration changes.
111 .IP "\fB\-q\fP, \fB\-\-query"
112 When this option is present, or when no configuration changes are requested,
113 xrandr will display the current state of the system.
114 .IP "\fB\-\-dryrun\fP"
115 Performs all the actions specified except that no changes are made.
116 .IP "\fB\-\-nograb\fP"
117 Apply the modifications without grabbing the screen.
118 It avoids blocking other applications during the update
119 but it might also cause some applications that
120 detect screen resize to receive old values.
121 .IP "\fB\-d\fP, \fB\-\-display\fP \fIname\fP"
122 This option selects the X display to use.
123 Note this refers to the X screen abstraction, not the monitor (or output).
124 .IP "\fB\-\-screen\fP \fIsnum\fP"
125 This option selects which screen to manipulate.
126 Note this refers to the X screen abstraction, not the monitor (or output).
127 .IP \fB\-\-q1\fP
128 Forces the usage of the RandR version 1.1 protocol,
129 even if a higher version is available.
130 .IP \fB\-\-q12\fP
131 Forces the usage of the RandR version 1.2 protocol, even if the display does
132 not report it as supported or a higher version is available.
133 .SH "RandR version 1.5 options"
134 Options for RandR 1.5 are used as a superset of the options for RandR 1.4.
135 .IP \fB\-\-listmonitors\fP
136 Report information about all defined monitors.
137 .IP \fB\-\-listactivemonitors\fP
138 Report information about currently active monitors.
139 .IP "\fB\-\-setmonitor\fP \fIname\fP \fIgeometry\fP \fIoutput-list\fP"
140 Define a new monitor with the given geometry and associated to the given outputs.
141 The \fIoutput-list\fP is either the keyword \fBnone\fP
142 or a comma-separated list of outputs.
143 The \fIgeometry\fP is either the keyword \fBauto\fP, in which case the monitor
144 will automatically track the geometry of the associated outputs,
145 or a manual specification in the form
146 \fIw\fP/\fImmw\fPx\fIh\fP/\fImmh\fP+\fIx\fP+\fIy\fP
147 where
148 .IR w ", " h ", " x ", " y
149 are in pixels and
150 .IR mmw ", " mmh
151 are the physical dimensions of the monitor.
152 .IP "\fB\-\-delmonitor\fP \fIname\fP"
153 Delete the given user-defined monitor.
154 .SH "RandR version 1.4 options"
155 Options for RandR 1.4 are used as a superset of the options for RandR 1.3.
156 .IP \fB\-\-listproviders\fP
157 Report information about the providers available.
158 .IP "\fB\-\-setprovideroutputsource\fP \fIprovider\fP \fIsource\fP"
159 Set \fIsource\fP as the source of display output images for \fIprovider\fP.
160 This is only possible if \fIsource\fP and \fIprovider\fP have the \fBSource
161 Output\fR and \fBSink Output\fR capabilities, respectively.
162 If \fIsource\fP is \fB0x0\fP, then \fIprovider\fP is disconnected from its
163 current output source.
164 .IP "\fB\-\-setprovideroffloadsink\fP \fIprovider\fP \fIsink\fP"
165 Set \fIprovider\fP as a render offload device for \fIsink\fP.
166 This is only possible if \fIprovider\fP and \fIsink\fP have the
167 \fBSource Offload\fR and \fBSink Offload\fR capabilities, respectively.
168 If \fIsink\fP is \fB0x0\fP, then \fIprovider\fP is disconnected from its current
169 render offload sink.
170 .SH "RandR version 1.3 options"
171 Options for RandR 1.3 are used as a superset of the options for RandR 1.2.
172 .IP \fB\-\-current\fP
173 Return the current screen configuration, without polling for hardware changes.
174 .IP \fB\-\-noprimary\fP
175 Don't define a primary output.
176 .PP
177 .B "Per-output options"
178 .IP "\fB\-\-panning\fP \fIwidth\fPx\fIheight\fP[+\fIx\fP+\fIy\fP\:\
179 [/\fItrack_width\fPx\fItrack_height\fP+\fItrack_x\fP+\fItrack_y\fP\:\
180 [/\fIborder_left\fP/\fIborder_top\fP/\fIborder_right\fP/\fIborder_bottom\fP]]]"
181 This option sets the panning parameters.
182 As soon as panning is enabled,
183 the CRTC position can change with every pointer move.
184 The first four parameters specify the total panning area,
185 the next four the pointer tracking area (which defaults to the same area).
186 The last four parameters specify the border and default to 0.
187 A width or height set to zero disables panning on the according axis.
188 You typically have to set the screen size with \fB\-\-fb\fP simultaneously.
189 .IP "\fB\-\-transform\fP \fIa\fP,\fIb\fP,\fIc\fP,\fId\fP,\fIe\fP,\fIf\fP,\fIg\fP,\fIh\fP,\fIi\fP"
190 Specifies a transformation matrix to apply on the output.
191 A bilinear filter is selected automatically
192 unless the \fB\-\-filter\fP parameter is also specified.
193 The mathematical form corresponds to:
194 .RS
195 .RS
196 a b c
197 .br
198 d e f
199 .br
200 g h i
201 .RE
202 The transformation is based on homogeneous coordinates.
203 The matrix multiplied by the coordinate vector of a pixel of the output
204 gives the transformed coordinate vector of a pixel in the graphic buffer.
205 More precisely, the vector
206 .RI ( "x y" )
207 of the output pixel is extended to 3 values
208 .RI ( "x y w" ),
209 with 1 as the w coordinate and multiplied against the matrix.
210 The final device coordinates of the pixel are then calculated with the
211 so-called homogenic division by the transformed w coordinate.
212 In other words, the device coordinates
213 .RI ( "x' y'" )
214 of the transformed pixel are:
215 .RS
216 x' = (ax + by + c) / w' and
217 .br
218 y' = (dx + ey + f) / w' ,
219 .br
220 with w' = (gx + hy + i) .
221 .RE
222 Typically, \fIa\fP and \fIe\fP corresponds to the scaling on the X and Y axes,
223 \fIc\fP and \fIf\fP corresponds to the translation on those axes,
224 and \fIg\fP, \fIh\fP, and \fIi\fP are respectively 0, 0 and 1.
225 The matrix can also be used to express more complex transformations
226 such as keystone correction, or rotation.
227 For a rotation of an angle T, this formula can be used:
228 .RS
229 cos T \-sin T 0
230 .br
231 sin T cos T 0
232 .br
233 0 0 1
234 .RE
235 As a special argument, instead of passing a matrix,
236 one can pass the string \fBnone\fP, in which case the default
237 values are used (a unit matrix without filter).
238 .RE
239 .IP "\fB\-\-filter\fP \fIfiltermode\fP"
240 Chooses the scaling filter method to be applied when the screen is scaled or
241 transformed.
242 Can be either \&'bilinear' or \&'nearest'.
243 .IP "\fB\-\-scale\fP \fIx\fP[x\fIy\fP]"
244 Changes the dimensions of the output picture.
245 If the \fIy\fP value is omitted,
246 the \fIx\fP value will be used for both dimensions.
247 Values larger than 1 lead to a compressed screen (screen dimension bigger
248 than the dimension of the output mode), and values less than 1 lead to
249 a zoom in on the output.
250 This option is actually a shortcut version of the \fB\-\-transform\fP option.
251 .IP "\fB\-\-scale\-from\fP \fIw\fPx\fIh\fP"
252 Specifies the size in pixels of the area of the framebuffer to be displayed on
253 this output.
254 This option is actually a shortcut version of the \fB\-\-transform\fP option.
255 .IP \fB\-\-primary\fP
256 Set the output as primary.
257 It will be sorted first in Xinerama and RANDR geometry requests.
258 .SH "RandR version 1.2 options"
259 These options are only available for X server supporting RandR version 1.2
260 or newer.
261 .IP "\fB\-\-prop\fP, \fB\-\-properties\fP"
262 This option causes xrandr to display the contents of properties for each
263 output.
264 \fB\-\-verbose\fP also enables \fB\-\-prop\fP.
265 .IP "\fB\-\-fb\fP \fIwidth\fPx\fIheight\fP"
266 Reconfigures the screen to the specified size.
267 All configured monitors must fit within this size.
268 When this option is not provided, xrandr computes the
269 smallest screen size that will hold the set of configured outputs;
270 this option provides a way to override that behaviour.
271 .IP "\fB\-\-fbmm\fP \fIwidth\fPx\fIheight\fP"
272 Sets the value reported as physical size of the X screen as a whole
273 (union of all configured monitors).
274 In configurations with multiple monitors with different DPIs,
275 the value has no physical meaning,
276 but it may be used by some legacy clients which do not support RandR
277 version 1.2 to compute a reference font scaling.
278 Normally,
279 xrandr resets the reported physical size values to keep the DPI constant.
280 This overrides that computation.
281 Default DPI value is 96.
282 .IP "\fB\-\-dpi\fP \fIdpi\fP"
283 .IP "\fB\-\-dpi\fP \fIfrom-output\fP"
284 This also sets the value reported as physical size of the X screen as a whole
285 (union of all configured monitors).
286 In configurations with multiple monitors with different DPIs,
287 the value has no physical meaning,
288 but it may be used by some legacy clients which do not support RandR
289 version 1.2 to compute a reference font scaling.
290 This option uses either the specified DPI value,
291 or the DPI of the given output,
292 to compute an appropriate physical size using whatever pixel size will be set.
293 Typical values are the default (96 DPI),
294 the DPI of the only monitor in single-monitor configurations,
295 or the DPI of the primary monitor in multi-monitor configurations.
296 .IP "\fB\-\-newmode\fP \fIname\fP \fImode\fP"
297 New modelines can be added to the server and then associated with outputs.
298 This option does the former.
299 The \fImode\fP is specified using the ModeLine syntax for xorg.conf:
300 \fIclock hdisp hsyncstart hsyncend htotal vdisp vsyncstart
301 vsyncend vtotal flags\fP.
302 \fIflags\fP can be zero or more of
303 .BR +HSync ", " -HSync ", " +VSync ", " -VSync ", "
304 .BR Interlace ", " DoubleScan ", " CSync ", " +CSync ", " -CSync .
305 Several tools compute the usual modeline from a height, width,
306 and refresh rate, for instance you can use
307 .BR cvt (1).
308 .IP "\fB\-\-rmmode\fP \fIname\fP"
309 This removes a mode from the server if it is otherwise unused.
310 .IP "\fB\-\-addmode\fP \fIoutput\fP \fIname\fP"
311 Add a mode to the set of valid modes for an output.
312 .IP "\fB\-\-delmode\fP \fIoutput\fP \fIname\fP"
313 Remove a mode from the set of valid modes for an output.
314 .PP
315 .B "Per-output options"
316 .IP "\fB\-\-output\fP \fIoutput\fP"
317 Selects an output to reconfigure. Use either the name of the output or the
318 XID.
319 .IP \fB\-\-auto\fP
320 For connected but disabled outputs,
321 this will enable them using their first preferred mode
322 (or something close to 96\~dpi if they have no preferred mode).
323 For disconnected but enabled outputs, this will disable them.
324 .IP "\fB\-\-mode\fP \fImode\fP"
325 This selects a mode.
326 Use either the name or the XID for \fImode\fP.
327 .IP "\fB\-\-preferred\fP"
328 This selects the same mode as \fB\-\-auto\fP,
329 but it doesn't automatically enable or disable the output.
330 .IP "\fB\-\-pos\fP \fIx\fPx\fIy\fP"
331 Position the output within the screen using pixel coordinates.
332 In case reflection or rotation is applied,
333 the translation is applied after the effects.
334 .IP "\fB\-\-rate\fP \fIrate\fP"
335 This marks a preference for refresh rates close to the specified value.
336 When multiple modes have the same name,
337 this will select the one with the nearest refresh rate.
338 .IP "\fB\-\-reflect\fP \fIreflection\fP"
339 Reflection can be one of
340 .BR normal ", " x ", " y ", or " xy .
341 This causes the output contents to be reflected across the specified axes.
342 .IP "\fB\-\-rotate\fP \fIrotation\fP"
343 Rotation can be one of
344 .BR normal ", " left ", " right ", or " inverted .
345 This causes the output contents to be rotated in the specified direction.
346 \fBright\fP specifies a clockwise rotation of the picture and
347 \fBleft\fP specifies a counter-clockwise rotation.
348 .IP "\fB\-\-left\-of\fP, \fB\-\-right\-of\fP, \fB\-\-above\fP, \
349 \fB\-\-below\fP, \fB\-\-same-as\fP \fIanother-output\fP"
350 Use one of these options to position the output relative to the position of
351 another output.
352 This allows convenient tiling of outputs within the screen.
353 The position is always computed relative to the new position of the other output,
354 so it is not valid to say
355 \fB\-\-output a \-\-left\-of b \-\-output b \-\-left\-of a\fP.
356 .IP "\fB\-\-set\fP \fIproperty\fP \fIvalue\fP"
357 Sets an output property.
358 Integer properties may be specified as a valid (see \fB\-\-prop\fP)
359 comma-separated list of decimal or hexadecimal (with a leading 0x) values.
360 Atom properties may be set to any of the valid atoms (see \fB\-\-prop\fP).
361 String properties may be set to any value.
362 .IP "\fB\-\-off\fP"
363 Disables the output.
364 .IP "\fB\-\-crtc\fP \fIcrtc\fP"
365 Uses the specified crtc (either as an index in the list of CRTCs or XID).
366 In normal usage, this option is not required as xrandr tries to make
367 sensible choices about which crtc to use with each output.
368 When that fails for some reason, this option can override the normal selection.
369 .IP "\fB\-\-gamma\fP \fIred\fP[:\fIgreen\fP:\fIblue\fP]"
370 Set the specified floating point values as gamma correction on the crtc
371 currently attached to this output.
372 If green and blue are not specified, the red value will be used
373 for all three components.
374 Note that you cannot get two different values for cloned outputs
375 (i.e., outputs which share the same crtc)
376 and that switching an output to another crtc doesn't change
377 the crtc gamma corrections at all.
378 .IP "\fB\-\-brightness\fP \fIbrightness\fP"
379 Multiply the gamma values on the crtc currently attached to the output to
380 specified floating value.
381 Useful for overly bright or overly dim outputs.
382 However, this is a software only modification,
383 if your hardware has support to actually change the brightness,
384 you will probably prefer to use
385 .BR xbacklight (1).
386 .SH "RandR version 1.1 options"
387 These options are available for X servers supporting RandR version 1.1 or
388 older.
389 They are still valid for newer X servers, but they don't interact
390 sensibly with version 1.2 options on the same command line.
391 .IP "\fB\-s\fP, \fB\-\-size\fP \fIsize-index\fP or \fB\-\-size\fP \fIwidth\fPx\fIheight\fP"
392 This sets the screen size, either matching by size or using the index into
393 the list of available sizes.
394 .IP "\fB\-r\fP, \fB\-\-rate\fP, \fB\-\-refresh\fP \fIrate\fP"
395 This sets the refresh rate closest to the specified value.
396 .IP "\fB\-o\fP, \fB\-\-orientation\fP \fIrotation\fP"
397 This specifies the orientation of the screen,
398 and can be one of
399 .BR normal ", " inverted ", " left ", or " right .
400 .IP \fB\-x\fP
401 Reflect across the X axis.
402 .IP \fB\-y\fP
403 Reflect across the Y axis.
404 .SH EXAMPLES
405 Sets an output called LVDS to its preferred mode,
406 and on its right put an output called VGA to set to the preferred mode
407 of a screen which has been physically rotated clockwise:
408 .RS
409 .nf
410 xrandr \-\-output LVDS \-\-auto \-\-rotate normal \-\-pos 0x0 \\
411 \-\-output VGA \-\-auto \-\-rotate left \-\-right\-of LVDS
412 .fi
413 .RE
414 .PP
415 Forces to use a 1024x768 mode on an output called VGA:
416 .RS
417 .nf
418 xrandr \-\-newmode "1024x768" \\
419 63.50 1024 1072 1176 1328 768 771 775 798 \-hsync +vsync
420 .fi
421 .br
422 xrandr \-\-addmode VGA 1024x768
423 .br
424 xrandr \-\-output VGA \-\-mode 1024x768
425 .RE
426 .PP
427 Enables panning on a 1600x768 desktop while displaying 1024x768 mode on an
428 output called VGA:
429 .RS
430 .nf
431 xrandr \-\-fb 1600x768 \-\-output VGA \-\-mode 1024x768 \\
432 \-\-panning 1600x0
433 .fi
434 .RE
435 .PP
436 Have one small 1280x800 LVDS screen showing a small version of
437 a huge 3200x2000 desktop,
438 and have a big VGA screen display the surrounding of the mouse at normal size.
439 .RS
440 .nf
441 xrandr \-\-fb 3200x2000 \-\-output LVDS \-\-scale 2.5x2.5 \\
442 \-\-output VGA \-\-pos 0x0 \\
443 \-\-panning 3200x2000+0+0/3200x2000+0+0/64/64/64/64
444 .fi
445 .RE
446 .PP
447 Displays the VGA output in trapezoid shape so that it is keystone corrected
448 when the projector is slightly above the screen:
449 .RS
450 .nf
451 xrandr \-\-fb 1024x768 \-\-output VGA \\
452 \-\-transform 1.24,0.16,\-124,0,1.24,0,0,0.000316,1
453 .fi
454 .RE
455 .SH "XWAYLAND"
456 .BR Xwayland (1)
457 is an X server that uses a Wayland Compositor as backend.
458 \fBXwayland\fP acts as translation layer between the X protocol and the Wayland
459 protocol but does not have direct access to the hardware.
460 With \fBXwayland\fP rootless (the default with most Wayland compositors),
461 RandR is emulated and only available read-only to report the current status
462 and configuration of the outputs as exposed to X11 clients.
463 As a result, it is not possible to change the configuration of the outputs
464 using \fBxrandr\fP on a Wayland environment with \fBXwayland\fP running rootless.
465 .SH "SEE ALSO"
466 .BR Xrandr (3),
467 .BR cvt (1),
468 .BR xkeystone (1),
469 .BR xbacklight (1)
470 .SH AUTHORS
471 Keith Packard,
472 Open Source Technology Center, Intel Corporation.
473 and
474 Jim Gettys,
475 Cambridge Research Laboratory, HP Labs, HP.