| 1 |
.\" DO NOT MODIFY THIS FILE! It was (partly) generated by help2man from |
| 2 |
.\" cpio --help/cpio --version output and partly patched by downstream |
| 3 |
.\" package maintainers. |
| 4 |
.TH CPIO 1L \" -*- nroff -*- |
| 5 |
.SH NAME |
| 6 |
cpio \- copy files to and from archives |
| 7 |
.SH __WARNING__ |
| 8 |
.PP |
| 9 |
The cpio utility is considered LEGACY based on POSIX specification. Users are |
| 10 |
encouraged to use other archiving tools for archive creation. |
| 11 |
|
| 12 |
If you decided to use cpio, you should almost always force cpio to use the |
| 13 |
ustar format in copy-out mode by the -H option (cpio -o -H ustar). This is |
| 14 |
because the ustar format is well defined in POSIX specification and thus |
| 15 |
readable by wide range of other archiving tools (including tar e.g.). |
| 16 |
|
| 17 |
By default, GNU cpio uses (for historical reasons) the very old binary format |
| 18 |
('bin') which has significant problems nowadays, e.g. with storing big inode |
| 19 |
numbers (see the Red Hat bug #952313). |
| 20 |
|
| 21 |
Note also that these days the modern 'pax' archive format should be considered |
| 22 |
as the default -- but this format is not implemented in GNU cpio. You should, |
| 23 |
again, consider using other archivers (e.g. 'tar --format=pax'). |
| 24 |
|
| 25 |
.SH SYNOPSIS |
| 26 |
\&\fBCopy-out mode\fR |
| 27 |
.PP |
| 28 |
In copy-out mode, cpio copies files into an archive. It reads a list |
| 29 |
of filenames, one per line, on the standard input, and writes the |
| 30 |
archive onto the standard output. A typical way to generate the list |
| 31 |
of filenames is with the find command; you should give find the \-depth |
| 32 |
option to minimize problems with permissions on directories that are |
| 33 |
unreadable. see \*(lqOptions\*(rq. |
| 34 |
.PP |
| 35 |
.B cpio |
| 36 |
{\-o|\-\-create} [\-0acvABLV] [\-C bytes] [\-H format] [\-D DIR] |
| 37 |
[\-M message] [\-O [[user@]host:]archive] [\-F [[user@]host:]archive] |
| 38 |
[\-\-file=[[user@]host:]archive] [\-\-format=format] [\-\-warning=FLAG] |
| 39 |
[\-\-message=message][\-\-null] [\-\-reset\-access\-time] [\-\-verbose] |
| 40 |
[\-\-dot] [\-\-append] [\-\-block\-size=blocks] [\-\-dereference] |
| 41 |
[\-\-io\-size=bytes] [\-\-rsh\-command=command] [\-\-license] [\-\-usage] |
| 42 |
[\-\-help] [\-\-version] |
| 43 |
< name-list [> archive] |
| 44 |
.PP |
| 45 |
\&\fBCopy-in mode\fR |
| 46 |
.PP |
| 47 |
In copy-in mode, cpio copies files out of an archive or lists the |
| 48 |
archive contents. It reads the archive from the standard input. Any |
| 49 |
non-option command line arguments are shell globbing patterns; only |
| 50 |
files in the archive whose names match one or more of those patterns are |
| 51 |
copied from the archive. Unlike in the shell, an initial `\fB.\fR' in a |
| 52 |
filename does match a wildcard at the start of a pattern, and a `\fB/\fR' in a |
| 53 |
filename can match wildcards. If no patterns are given, all files are |
| 54 |
extracted. see \*(lqOptions\*(rq. |
| 55 |
.PP |
| 56 |
.B cpio |
| 57 |
{\-i|\-\-extract} [\-bcdfmnrtsuvBSV] [\-C bytes] [\-E file] [\-H format] |
| 58 |
[\-D DIR] |
| 59 |
[\-M message] [\-R [user][:.][group]] [\-I [[user@]host:]archive] |
| 60 |
[\-F [[user@]host:]archive] [\-\-file=[[user@]host:]archive] |
| 61 |
[\-\-make-directories] [\-\-nonmatching] [\-\-preserve-modification-time] |
| 62 |
[\-\-numeric-uid-gid] [\-\-rename] [\-t|\-\-list] [\-\-swap-bytes] [\-\-swap] |
| 63 |
[\-\-dot] [\-\-warning=FLAG] [\-\-unconditional] [\-\-verbose] |
| 64 |
[\-\-block-size=blocks] [\-\-swap-halfwords] [\-\-io-size=bytes] |
| 65 |
[\-\-pattern-file=file] [\-\-format=format] [\-\-owner=[user][:.][group]] |
| 66 |
[\-\-no-preserve-owner] [\-\-message=message] |
| 67 |
[\-\-force\-local] [\-\-no\-absolute\-filenames] [\-\-absolute\-filenames] |
| 68 |
[\-\-sparse] [\-\-only\-verify\-crc] [\-\-to\-stdout] [\-\-quiet] |
| 69 |
[\-\-ignore\-devno] [\-\-renumber\-inodes] [\-\-device\-independent] |
| 70 |
[\-\-reproducible] |
| 71 |
[\-\-rsh-command=command] [\-\-license] [\-\-usage] [\-\-help] |
| 72 |
[\-\-version] [pattern...] [< archive] |
| 73 |
.PP |
| 74 |
\&\fBCopy-pass mode\fR |
| 75 |
.PP |
| 76 |
In copy-pass mode, cpio copies files from one directory tree to |
| 77 |
another, combining the copy-out and copy-in steps without actually |
| 78 |
using an archive. It reads the list of files to copy from the standard |
| 79 |
input; the directory into which it will copy them is given as a |
| 80 |
non-option argument. see \*(lqOptions\*(rq. |
| 81 |
.PP |
| 82 |
.B cpio |
| 83 |
{\-p|\-\-pass-through} [\-0adlmuvLV] [\-R [user][:.][group]] [\-D DIR] |
| 84 |
[\-\-null] [\-\-reset-access-time] [\-\-make-directories] [\-\-link] [\-\-quiet] |
| 85 |
[\-\-preserve-modification-time] [\-\-unconditional] [\-\-verbose] [\-\-dot] |
| 86 |
[\-\-warning=FLAG] [\-\-dereference] [\-\-owner=[user][:.][group]] |
| 87 |
[\-\-no-preserve-owner] [\-\-sparse] [\-\-license] [\-\-usage] [\-\-help] |
| 88 |
[\-\-version] destination-directory < name-list |
| 89 |
.PP |
| 90 |
.SH DESCRIPTION |
| 91 |
GNU cpio is a tool for creating and extracting archives, or copying |
| 92 |
files from one place to another. It handles a number of cpio formats as |
| 93 |
well as reading and writing tar files. |
| 94 |
.PP |
| 95 |
Following archive formats are supported: binary, old ASCII, new ASCII, crc, HPUX binary, HPUX old |
| 96 |
ASCII, old tar, and POSIX.1 tar. The tar format is provided for compatibility with the tar program. By |
| 97 |
default, cpio creates binary format archives, for compatibility with older cpio programs. When extracting |
| 98 |
from archives, cpio automatically recognizes which kind of archive it is reading and can read archives created |
| 99 |
on machines with a different byte-order. |
| 100 |
.PP |
| 101 |
.SS "Main operation mode:" |
| 102 |
.TP |
| 103 |
\fB\-i\fR, \fB\-\-extract\fR |
| 104 |
Extract files from an archive (run in copy\-in |
| 105 |
mode) |
| 106 |
.TP |
| 107 |
\fB\-o\fR, \fB\-\-create\fR |
| 108 |
Create the archive (run in copy\-out mode) |
| 109 |
.TP |
| 110 |
\fB\-p\fR, \fB\-\-pass\-through\fR |
| 111 |
Run in copy\-pass mode |
| 112 |
.TP |
| 113 |
\fB\-t\fR, \fB\-\-list\fR |
| 114 |
Print a table of contents of the input |
| 115 |
.SS "Operation modifiers valid in any mode:" |
| 116 |
.TP |
| 117 |
\fB\-\-block\-size\fR=\fI\,BLOCK\-SIZE\/\fR |
| 118 |
Set the I/O block size to BLOCK\-SIZE * 512 |
| 119 |
bytes |
| 120 |
.TP |
| 121 |
\fB\-B\fR |
| 122 |
Set the I/O block size to 5120 bytes. |
| 123 |
Initially the block size is 512 bytes. |
| 124 |
.TP |
| 125 |
\fB\-c\fR |
| 126 |
Identical to "\-H newc", use the new (SVR4) |
| 127 |
portable format. If you wish the old portable |
| 128 |
(ASCII) archive format, use "\-H odc" instead. |
| 129 |
.TP |
| 130 |
\fB\-C\fR, \fB\-\-io\-size\fR=\fI\,NUMBER\/\fR |
| 131 |
Set the I/O block size to the given NUMBER of |
| 132 |
bytes |
| 133 |
.TP |
| 134 |
\fB\-D\fR, \fB\-\-directory\fR=\fI\,DIR\/\fR |
| 135 |
Change to directory DIR |
| 136 |
.TP |
| 137 |
\fB\-\-force\-local\fR |
| 138 |
With \-F, \-I, or \-O, take the archive file name to be a local file |
| 139 |
even if it contains a colon, which would ordinarily indicate a |
| 140 |
remote host name. |
| 141 |
.TP |
| 142 |
\fB\-H\fR, \fB\-\-format\fR=\fI\,FORMAT\/\fR |
| 143 |
Use given archive FORMAT. |
| 144 |
The valid formats are listed below; the same names are also recognized in |
| 145 |
all\-caps. The default in copy-in mode is to automatically detect the archive |
| 146 |
format, and in copy-out mode is `\fBbin\fR'. |
| 147 |
.TP |
| 148 |
`bin' |
| 149 |
The obsolete binary format. |
| 150 |
.TP |
| 151 |
`odc' |
| 152 |
The old (\s-1POSIX\s0.1) portable format. |
| 153 |
.TP |
| 154 |
`newc' |
| 155 |
The new (\s-1SVR4\s0) portable format, which supports file systems |
| 156 |
having more than 65536 i\-nodes. |
| 157 |
.TP |
| 158 |
`crc' |
| 159 |
The new (\s-1SVR4\s0) portable format with a checksum (Sum32) added. |
| 160 |
.TP |
| 161 |
`tar' |
| 162 |
The old tar format. |
| 163 |
.TP |
| 164 |
`ustar' |
| 165 |
The \s-1POSIX\s0.1 tar format. Also recognizes \s-1GNU\s0 tar archives, |
| 166 |
which are similar but not identical. |
| 167 |
.TP |
| 168 |
`hpbin' |
| 169 |
The obsolete binary format used by \s-1HPUX\s0's cpio (which stores |
| 170 |
device files differently). |
| 171 |
.TP |
| 172 |
`hpodc' |
| 173 |
The portable format used by \s-1HPUX\s0's cpio (which stores device |
| 174 |
files differently). |
| 175 |
.TP |
| 176 |
\fB\-\-quiet\fR |
| 177 |
Do not print the number of blocks copied |
| 178 |
.TP |
| 179 |
\fB\-R\fR, \fB\-\-owner\fR=\fI\,[USER][\/\fR:.][GROUP] |
| 180 |
Set the ownership of all files created to the |
| 181 |
specified USER and/or GROUP. |
| 182 |
Either the user, the group, or both, must be present. If the group is omitted |
| 183 |
but the \&\*(lq:\*(rq or \*(lq.\*(rq separator is given, use the given user's |
| 184 |
login group. Only the super-user can change files' ownership in copy\-in mode. |
| 185 |
.TP |
| 186 |
\fB\-v\fR, \fB\-\-verbose\fR |
| 187 |
List the files processed, or with `\fB\-t\fR', give an `\fBls \-l\fR' style |
| 188 |
table of contents listing. In a verbose table of contents of a |
| 189 |
ustar archive, user and group names in the archive that do not |
| 190 |
exist on the local system are replaced by the names that |
| 191 |
correspond locally to the numeric \s-1UID\s0 and \s-1GID\s0 stored in the |
| 192 |
archive. |
| 193 |
.TP |
| 194 |
\fB\-V\fR, \fB\-\-dot\fR |
| 195 |
Print a "." for each file processed |
| 196 |
.TP |
| 197 |
\fB\-W\fR, \fB\-\-warning\fR=\fI\,FLAG\/\fR |
| 198 |
Control warning display. Currently FLAG is one of |
| 199 |
\&'none', 'truncate', 'all'. Multiple options |
| 200 |
accumulate. |
| 201 |
.SS "Operation modifiers valid in copy-in and copy-out modes:" |
| 202 |
.TP |
| 203 |
\fB\-F\fR, \fB\-\-file\fR=\fI\,[[USER\/\fR@]HOST:]FILE\-NAME |
| 204 |
Use this FILE\-NAME instead of standard input or |
| 205 |
output. Optional USER and HOST specify the user |
| 206 |
and host names in case of a remote archive |
| 207 |
.TP |
| 208 |
\fB\-M\fR, \fB\-\-message\fR=\fI\,STRING\/\fR |
| 209 |
Print \s-1STRING\s0 when the end of a volume of the backup media (such |
| 210 |
as a tape or a floppy disk) is reached, to prompt the user to |
| 211 |
insert a new volume. If \s-1STRING\s0 contains the string \*(lq%d\*(rq, it is |
| 212 |
replaced by the current volume number (starting at 1). |
| 213 |
.TP |
| 214 |
\fB\-\-rsh\-command\fR=\fI\,COMMAND\/\fR |
| 215 |
Use COMMAND instead of rsh |
| 216 |
(typically /usr/bin/ssh) |
| 217 |
.SS "Operation modifiers valid only in copy-in mode:" |
| 218 |
.TP |
| 219 |
\fB\-b\fR, \fB\-\-swap\fR |
| 220 |
Swap both halfwords of words and bytes of |
| 221 |
halfwords in the data. Equivalent to \fB\-sS\fR |
| 222 |
Use this option to convert 32\-bit integers between big-endian and little-endian |
| 223 |
machines. |
| 224 |
.TP |
| 225 |
\fB\-f\fR, \fB\-\-nonmatching\fR |
| 226 |
Only copy files that do not match any of the given |
| 227 |
patterns |
| 228 |
.TP |
| 229 |
\fB\-I\fR [[USER@]HOST:]FILE\-NAME |
| 230 |
Archive filename to use instead of standard input. |
| 231 |
Optional USER and HOST specify the user and host |
| 232 |
names in case of a remote archive |
| 233 |
.TP |
| 234 |
\fB\-n\fR, \fB\-\-numeric\-uid\-gid\fR |
| 235 |
In the verbose table of contents listing, show |
| 236 |
numeric UID and GID |
| 237 |
.TP |
| 238 |
\fB\-r\fR, \fB\-\-rename\fR |
| 239 |
Interactively rename files |
| 240 |
.TP |
| 241 |
\fB\-s\fR, \fB\-\-swap\-bytes\fR |
| 242 |
Swap the bytes of each halfword in the files |
| 243 |
.TP |
| 244 |
\fB\-S\fR, \fB\-\-swap\-halfwords\fR |
| 245 |
Swap the halfwords of each word (4 bytes) in the |
| 246 |
files |
| 247 |
.TP |
| 248 |
\fB\-\-to\-stdout\fR |
| 249 |
Extract files to standard output |
| 250 |
.TP |
| 251 |
\fB\-E\fR, \fB\-\-pattern\-file\fR=\fI\,FILE\/\fR |
| 252 |
Read additional patterns specifying filenames to |
| 253 |
extract or list from FILE |
| 254 |
.TP |
| 255 |
\fB\-\-only\-verify\-crc\fR |
| 256 |
When reading a CRC format archive, only verify the |
| 257 |
checksum of each file in the archive, don't |
| 258 |
actually extract the files |
| 259 |
.SS "Operation modifiers valid only in copy-out mode:" |
| 260 |
.TP |
| 261 |
\fB\-A\fR, \fB\-\-append\fR |
| 262 |
Append to an existing archive. |
| 263 |
The archive must be a disk file specified with the \-O or \-F (\-file) option. |
| 264 |
.TP |
| 265 |
\fB\-\-device\-independent\fR, \fB\-\-reproducible\fR |
| 266 |
Create device\-independent (reproducible) archives |
| 267 |
.TP |
| 268 |
\fB\-\-ignore\-devno\fR |
| 269 |
Don't store device numbers |
| 270 |
.TP |
| 271 |
\fB\-O\fR [[USER@]HOST:]FILE\-NAME |
| 272 |
Archive filename to use instead of standard |
| 273 |
output. Optional USER and HOST specify the user |
| 274 |
and host names in case of a remote archive |
| 275 |
.TP |
| 276 |
\fB\-\-renumber\-inodes\fR |
| 277 |
Renumber inodes |
| 278 |
.SS "Operation modifiers valid only in copy-pass mode:" |
| 279 |
.TP |
| 280 |
\fB\-l\fR, \fB\-\-link\fR |
| 281 |
Link files instead of copying them, when |
| 282 |
possible |
| 283 |
.SS "Operation modifiers valid in copy-in and copy-out modes:" |
| 284 |
.TP |
| 285 |
\fB\-\-absolute\-filenames\fR |
| 286 |
Do not strip file system prefix components from |
| 287 |
the file names |
| 288 |
.TP |
| 289 |
\fB\-\-no\-absolute\-filenames\fR |
| 290 |
Create all files relative to the current |
| 291 |
directory |
| 292 |
.SS "Operation modifiers valid in copy-out and copy-pass modes:" |
| 293 |
.TP |
| 294 |
\fB\-0\fR, \fB\-\-null\fR |
| 295 |
Filenames in the list are delimited by null |
| 296 |
characters instead of newlines, so that files whose names contain newlines can |
| 297 |
be archived. \s-1GNU\s0 find is one way to produce a list of null-terminated |
| 298 |
filenames. |
| 299 |
.TP |
| 300 |
\fB\-a\fR, \fB\-\-reset\-access\-time\fR |
| 301 |
Reset the access times of files after reading them, so that it |
| 302 |
does not look like they have just been read. |
| 303 |
.TP |
| 304 |
\fB\-L\fR, \fB\-\-dereference\fR |
| 305 |
Dereference symbolic links (copy the files |
| 306 |
that they point to instead of copying the links). |
| 307 |
.SS "Operation modifiers valid in copy-in and copy-pass modes:" |
| 308 |
.TP |
| 309 |
\fB\-d\fR, \fB\-\-make\-directories\fR |
| 310 |
Create leading directories where needed |
| 311 |
.TP |
| 312 |
\fB\-m\fR, \fB\-\-preserve\-modification\-time\fR |
| 313 |
Retain previous file modification times when |
| 314 |
creating files |
| 315 |
.TP |
| 316 |
\fB\-\-no\-preserve\-owner\fR |
| 317 |
Do not change the ownership of the files; leave them owned by the |
| 318 |
user extracting them. This is the default for non-root users, so |
| 319 |
that users on System V don't inadvertently give away files. This |
| 320 |
option can be used in copy-in mode and copy-pass mode |
| 321 |
.TP |
| 322 |
\fB\-\-sparse\fR |
| 323 |
Write files with large blocks of zeros as sparse |
| 324 |
files |
| 325 |
.TP |
| 326 |
\fB\-u\fR, \fB\-\-unconditional\fR |
| 327 |
Replace all files unconditionally |
| 328 |
.TP |
| 329 |
\-?, \fB\-\-help\fR |
| 330 |
give this help list |
| 331 |
.TP |
| 332 |
\fB\-\-usage\fR |
| 333 |
give a short usage message |
| 334 |
.TP |
| 335 |
\fB\-\-version\fR |
| 336 |
print program version |
| 337 |
.PP |
| 338 |
Mandatory or optional arguments to long options are also mandatory or optional |
| 339 |
for any corresponding short options. |
| 340 |
|
| 341 |
.PP |
| 342 |
.SH EXAMPLES |
| 343 |
When creating an archive, cpio takes the list of files to be |
| 344 |
processed from the standard input, and then sends the archive to the |
| 345 |
standard output, or to the device defined by the `\fB\-F\fR' option. |
| 346 |
Usually find or ls is used to provide this list to |
| 347 |
the standard input. In the following example you can see the |
| 348 |
possibilities for archiving the contents of a single directory. |
| 349 |
.PP |
| 350 |
.B % ls | cpio \-ov > directory.cpio |
| 351 |
.PP |
| 352 |
The `\fB\-o\fR' option creates the archive, and the `\fB\-v\fR' option prints the |
| 353 |
names of the files archived as they are added. Notice that the options |
| 354 |
can be put together after a single `\fB\-\fR' or can be placed separately on |
| 355 |
the command line. The `\fB>\fR' redirects the cpio output to the file |
| 356 |
`\fBdirectory.cpio\fR'. |
| 357 |
.PP |
| 358 |
If you wanted to archive an entire directory tree, the find command |
| 359 |
can provide the file list to cpio: |
| 360 |
.PP |
| 361 |
.B % find . \-print \-depth | cpio \-ov > tree.cpio |
| 362 |
.PP |
| 363 |
This will take all the files in the current directory, the |
| 364 |
directories below and place them in the archive tree.cpio. Again the |
| 365 |
`\fB\-o\fR' creates an archive, and the `\fB\-v\fR' option shows you the name of the |
| 366 |
files as they are archived. see \*(lqCopy\-out mode\*(rq. Using the `\fB.\fR' in |
| 367 |
the find statement will give you more flexibility when doing restores, |
| 368 |
as it will save file names with a relative path vice a hard wired, |
| 369 |
absolute path. The `\fB\-depth\fR' option forces `\fBfind\fR' to print of the |
| 370 |
entries in a directory before printing the directory itself. This |
| 371 |
limits the effects of restrictive directory permissions by printing the |
| 372 |
directory entries in a directory before the directory name itself. |
| 373 |
.PP |
| 374 |
Extracting an archive requires a bit more thought because cpio will |
| 375 |
not create directories by default. Another characteristic, is it will |
| 376 |
not overwrite existing files unless you tell it to. |
| 377 |
.PP |
| 378 |
.B % cpio \-iv < directory.cpio |
| 379 |
.PP |
| 380 |
This will retrieve the files archived in the file directory.cpio and |
| 381 |
place them in the present directory. The `\fB\-i\fR' option extracts the |
| 382 |
archive and the `\fB\-v\fR' shows the file names as they are extracted. If |
| 383 |
you are dealing with an archived directory tree, you need to use the |
| 384 |
`\fB\-d\fR' option to create directories as necessary, something like: |
| 385 |
.PP |
| 386 |
.B % cpio \-idv < tree.cpio |
| 387 |
.PP |
| 388 |
This will take the contents of the archive tree.cpio and extract it |
| 389 |
to the current directory. If you try to extract the files on top of |
| 390 |
files of the same name that already exist (and have the same or later |
| 391 |
modification time) cpio will not extract the file unless told to do so |
| 392 |
by the \-u option. see \*(lqCopy\-in mode\*(rq. |
| 393 |
.PP |
| 394 |
In copy-pass mode, cpio copies files from one directory tree to |
| 395 |
another, combining the copy-out and copy-in steps without actually |
| 396 |
using an archive. It reads the list of files to copy from the standard |
| 397 |
input; the directory into which it will copy them is given as a |
| 398 |
non-option argument. see \*(lqCopy\-pass mode\*(rq. |
| 399 |
.PP |
| 400 |
.B % find . \-depth \-print0 | cpio \-\-null \-pvd new-dir |
| 401 |
.PP |
| 402 |
The example shows copying the files of the present directory, and |
| 403 |
sub-directories to a new directory called new\-dir. Some new options are |
| 404 |
the `\fB\-print0\fR' available with \s-1GNU\s0 find, combined with the `\fB\-\-null\fR' |
| 405 |
option of cpio. These two options act together to send file names |
| 406 |
between find and cpio, even if special characters are embedded in the |
| 407 |
file names. Another is `\fB\-p\fR', which tells cpio to pass the files it |
| 408 |
finds to the directory `\fBnew-dir\fR'. |
| 409 |
|
| 410 |
|
| 411 |
.SH AUTHOR |
| 412 |
Written by Phil Nelson, David MacKenzie, John Oleynick, |
| 413 |
and Sergey Poznyakoff. |
| 414 |
.SH "REPORTING BUGS" |
| 415 |
Report bugs to <bug\[email protected]>. |
| 416 |
Report bugs in this manual page via https://bugzilla.redhat.com. |
| 417 |
.SH COPYRIGHT |
| 418 |
Copyright \(co 2015 Free Software Foundation, Inc. |
| 419 |
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. |
| 420 |
.br |
| 421 |
This is free software: you are free to change and redistribute it. |
| 422 |
There is NO WARRANTY, to the extent permitted by law. |
| 423 |
.SH "SEE ALSO" |
| 424 |
The full documentation for |
| 425 |
.B cpio |
| 426 |
is maintained as a Texinfo manual. If the |
| 427 |
.B info |
| 428 |
and |
| 429 |
.B cpio |
| 430 |
programs are properly installed at your site, the command |
| 431 |
.IP |
| 432 |
.B info cpio |
| 433 |
.PP |
| 434 |
should give you access to the complete manual. |
| 435 |
|
| 436 |
The online copy of the documentation is available at the following address: |
| 437 |
.PP |
| 438 |
http://www.gnu.org/software/cpio/manual |