| 1 |
/* |
| 2 |
* Copyright (c) 2001-2003 Swedish Institute of Computer Science. |
| 3 |
* All rights reserved. |
| 4 |
* |
| 5 |
* Redistribution and use in source and binary forms, with or without modification, |
| 6 |
* are permitted provided that the following conditions are met: |
| 7 |
* |
| 8 |
* 1. Redistributions of source code must retain the above copyright notice, |
| 9 |
* this list of conditions and the following disclaimer. |
| 10 |
* 2. Redistributions in binary form must reproduce the above copyright notice, |
| 11 |
* this list of conditions and the following disclaimer in the documentation |
| 12 |
* and/or other materials provided with the distribution. |
| 13 |
* 3. The name of the author may not be used to endorse or promote products |
| 14 |
* derived from this software without specific prior written permission. |
| 15 |
* |
| 16 |
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| 17 |
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| 18 |
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT |
| 19 |
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| 20 |
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT |
| 21 |
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| 22 |
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| 23 |
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| 24 |
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY |
| 25 |
* OF SUCH DAMAGE. |
| 26 |
* |
| 27 |
* This file is part of the lwIP TCP/IP stack. |
| 28 |
* |
| 29 |
* Author: Adam Dunkels <[email protected]> |
| 30 |
* |
| 31 |
*/ |
| 32 |
#ifndef LWIP_LWIPOPTS_H |
| 33 |
#define LWIP_LWIPOPTS_H |
| 34 |
|
| 35 |
#ifdef LWIP_OPTTEST_FILE |
| 36 |
#include "lwipopts_test.h" |
| 37 |
#else /* LWIP_OPTTEST_FILE */ |
| 38 |
|
| 39 |
#define LWIP_IPV4 1 |
| 40 |
#define LWIP_IPV6 1 |
| 41 |
|
| 42 |
#define NO_SYS 0 |
| 43 |
#define LWIP_SOCKET (NO_SYS==0) |
| 44 |
#define LWIP_NETCONN (NO_SYS==0) |
| 45 |
#define LWIP_NETIF_API (NO_SYS==0) |
| 46 |
|
| 47 |
#define LWIP_IGMP LWIP_IPV4 |
| 48 |
#define LWIP_ICMP LWIP_IPV4 |
| 49 |
|
| 50 |
#define LWIP_SNMP LWIP_UDP |
| 51 |
#define MIB2_STATS LWIP_SNMP |
| 52 |
#ifdef LWIP_HAVE_MBEDTLS |
| 53 |
#define LWIP_SNMP_V3 (LWIP_SNMP) |
| 54 |
#endif |
| 55 |
|
| 56 |
#define LWIP_DNS LWIP_UDP |
| 57 |
#define LWIP_MDNS_RESPONDER LWIP_UDP |
| 58 |
|
| 59 |
#define LWIP_NUM_NETIF_CLIENT_DATA (LWIP_MDNS_RESPONDER) |
| 60 |
|
| 61 |
#define LWIP_HAVE_LOOPIF 1 |
| 62 |
#define LWIP_NETIF_LOOPBACK 1 |
| 63 |
#define LWIP_LOOPBACK_MAX_PBUFS 10 |
| 64 |
|
| 65 |
#define TCP_LISTEN_BACKLOG 1 |
| 66 |
|
| 67 |
#define LWIP_COMPAT_SOCKETS 1 |
| 68 |
#define LWIP_SO_RCVTIMEO 1 |
| 69 |
#define LWIP_SO_RCVBUF 1 |
| 70 |
|
| 71 |
#define LWIP_TCPIP_CORE_LOCKING 1 |
| 72 |
|
| 73 |
#define LWIP_NETIF_LINK_CALLBACK 1 |
| 74 |
#define LWIP_NETIF_STATUS_CALLBACK 1 |
| 75 |
#define LWIP_NETIF_EXT_STATUS_CALLBACK 1 |
| 76 |
|
| 77 |
#ifdef LWIP_DEBUG |
| 78 |
|
| 79 |
#define LWIP_DBG_MIN_LEVEL 0 |
| 80 |
#define PPP_DEBUG LWIP_DBG_OFF |
| 81 |
#define MEM_DEBUG LWIP_DBG_OFF |
| 82 |
#define MEMP_DEBUG LWIP_DBG_OFF |
| 83 |
#define PBUF_DEBUG LWIP_DBG_OFF |
| 84 |
#define API_LIB_DEBUG LWIP_DBG_OFF |
| 85 |
#define API_MSG_DEBUG LWIP_DBG_OFF |
| 86 |
#define TCPIP_DEBUG LWIP_DBG_OFF |
| 87 |
#define NETIF_DEBUG LWIP_DBG_OFF |
| 88 |
#define SOCKETS_DEBUG LWIP_DBG_OFF |
| 89 |
#define DNS_DEBUG LWIP_DBG_OFF |
| 90 |
#define AUTOIP_DEBUG LWIP_DBG_OFF |
| 91 |
#define DHCP_DEBUG LWIP_DBG_OFF |
| 92 |
#define IP_DEBUG LWIP_DBG_OFF |
| 93 |
#define IP_REASS_DEBUG LWIP_DBG_OFF |
| 94 |
#define ICMP_DEBUG LWIP_DBG_OFF |
| 95 |
#define IGMP_DEBUG LWIP_DBG_OFF |
| 96 |
#define UDP_DEBUG LWIP_DBG_OFF |
| 97 |
#define TCP_DEBUG LWIP_DBG_OFF |
| 98 |
#define TCP_INPUT_DEBUG LWIP_DBG_OFF |
| 99 |
#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF |
| 100 |
#define TCP_RTO_DEBUG LWIP_DBG_OFF |
| 101 |
#define TCP_CWND_DEBUG LWIP_DBG_OFF |
| 102 |
#define TCP_WND_DEBUG LWIP_DBG_OFF |
| 103 |
#define TCP_FR_DEBUG LWIP_DBG_OFF |
| 104 |
#define TCP_QLEN_DEBUG LWIP_DBG_OFF |
| 105 |
#define TCP_RST_DEBUG LWIP_DBG_OFF |
| 106 |
#endif |
| 107 |
|
| 108 |
#define LWIP_DBG_TYPES_ON (LWIP_DBG_ON|LWIP_DBG_TRACE|LWIP_DBG_STATE|LWIP_DBG_FRESH|LWIP_DBG_HALT) |
| 109 |
|
| 110 |
|
| 111 |
/* ---------- Memory options ---------- */ |
| 112 |
/* MEM_ALIGNMENT: should be set to the alignment of the CPU for which |
| 113 |
lwIP is compiled. 4 byte alignment -> define MEM_ALIGNMENT to 4, 2 |
| 114 |
byte alignment -> define MEM_ALIGNMENT to 2. */ |
| 115 |
/* MSVC port: intel processors don't need 4-byte alignment, |
| 116 |
but are faster that way! */ |
| 117 |
#define MEM_ALIGNMENT 4U |
| 118 |
|
| 119 |
/* MEM_SIZE: the size of the heap memory. If the application will send |
| 120 |
a lot of data that needs to be copied, this should be set high. */ |
| 121 |
#define MEM_SIZE 10240 |
| 122 |
|
| 123 |
/* MEMP_NUM_PBUF: the number of memp struct pbufs. If the application |
| 124 |
sends a lot of data out of ROM (or other static memory), this |
| 125 |
should be set high. */ |
| 126 |
#define MEMP_NUM_PBUF 16 |
| 127 |
/* MEMP_NUM_RAW_PCB: the number of UDP protocol control blocks. One |
| 128 |
per active RAW "connection". */ |
| 129 |
#define MEMP_NUM_RAW_PCB 3 |
| 130 |
/* MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One |
| 131 |
per active UDP "connection". */ |
| 132 |
#define MEMP_NUM_UDP_PCB 8 |
| 133 |
/* MEMP_NUM_TCP_PCB: the number of simultaneously active TCP |
| 134 |
connections. */ |
| 135 |
#define MEMP_NUM_TCP_PCB 5 |
| 136 |
/* MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP |
| 137 |
connections. */ |
| 138 |
#define MEMP_NUM_TCP_PCB_LISTEN 8 |
| 139 |
/* MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP |
| 140 |
segments. */ |
| 141 |
#define MEMP_NUM_TCP_SEG 16 |
| 142 |
/* MEMP_NUM_SYS_TIMEOUT: the number of simultaneously active |
| 143 |
timeouts. */ |
| 144 |
#define MEMP_NUM_SYS_TIMEOUT 17 |
| 145 |
|
| 146 |
/* The following four are used only with the sequential API and can be |
| 147 |
set to 0 if the application only will use the raw API. */ |
| 148 |
/* MEMP_NUM_NETBUF: the number of struct netbufs. */ |
| 149 |
#define MEMP_NUM_NETBUF 2 |
| 150 |
/* MEMP_NUM_NETCONN: the number of struct netconns. */ |
| 151 |
#define MEMP_NUM_NETCONN 12 |
| 152 |
/* MEMP_NUM_TCPIP_MSG_*: the number of struct tcpip_msg, which is used |
| 153 |
for sequential API communication and incoming packets. Used in |
| 154 |
src/api/tcpip.c. */ |
| 155 |
#define MEMP_NUM_TCPIP_MSG_API 16 |
| 156 |
#define MEMP_NUM_TCPIP_MSG_INPKT 16 |
| 157 |
|
| 158 |
|
| 159 |
/* ---------- Pbuf options ---------- */ |
| 160 |
/* PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ |
| 161 |
#define PBUF_POOL_SIZE 120 |
| 162 |
|
| 163 |
/* PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. */ |
| 164 |
#define PBUF_POOL_BUFSIZE 256 |
| 165 |
|
| 166 |
/** SYS_LIGHTWEIGHT_PROT |
| 167 |
* define SYS_LIGHTWEIGHT_PROT in lwipopts.h if you want inter-task protection |
| 168 |
* for certain critical regions during buffer allocation, deallocation and memory |
| 169 |
* allocation and deallocation. |
| 170 |
*/ |
| 171 |
#define SYS_LIGHTWEIGHT_PROT (NO_SYS==0) |
| 172 |
|
| 173 |
|
| 174 |
/* ---------- TCP options ---------- */ |
| 175 |
#define LWIP_TCP 1 |
| 176 |
#define TCP_TTL 255 |
| 177 |
|
| 178 |
#define LWIP_ALTCP (LWIP_TCP) |
| 179 |
#ifdef LWIP_HAVE_MBEDTLS |
| 180 |
#define LWIP_ALTCP_TLS (LWIP_TCP) |
| 181 |
#define LWIP_ALTCP_TLS_MBEDTLS (LWIP_TCP) |
| 182 |
#endif |
| 183 |
|
| 184 |
|
| 185 |
/* Controls if TCP should queue segments that arrive out of |
| 186 |
order. Define to 0 if your device is low on memory. */ |
| 187 |
#define TCP_QUEUE_OOSEQ 1 |
| 188 |
|
| 189 |
/* TCP Maximum segment size. */ |
| 190 |
#define TCP_MSS 1024 |
| 191 |
|
| 192 |
/* TCP sender buffer space (bytes). */ |
| 193 |
#define TCP_SND_BUF 2048 |
| 194 |
|
| 195 |
/* TCP sender buffer space (pbufs). This must be at least = 2 * |
| 196 |
TCP_SND_BUF/TCP_MSS for things to work. */ |
| 197 |
#define TCP_SND_QUEUELEN (4 * TCP_SND_BUF/TCP_MSS) |
| 198 |
|
| 199 |
/* TCP writable space (bytes). This must be less than or equal |
| 200 |
to TCP_SND_BUF. It is the amount of space which must be |
| 201 |
available in the tcp snd_buf for select to return writable */ |
| 202 |
#define TCP_SNDLOWAT (TCP_SND_BUF/2) |
| 203 |
|
| 204 |
/* TCP receive window. */ |
| 205 |
#define TCP_WND (20 * 1024) |
| 206 |
|
| 207 |
/* Maximum number of retransmissions of data segments. */ |
| 208 |
#define TCP_MAXRTX 12 |
| 209 |
|
| 210 |
/* Maximum number of retransmissions of SYN segments. */ |
| 211 |
#define TCP_SYNMAXRTX 4 |
| 212 |
|
| 213 |
|
| 214 |
/* ---------- ARP options ---------- */ |
| 215 |
#define LWIP_ARP 1 |
| 216 |
#define ARP_TABLE_SIZE 10 |
| 217 |
#define ARP_QUEUEING 1 |
| 218 |
|
| 219 |
|
| 220 |
/* ---------- IP options ---------- */ |
| 221 |
/* Define IP_FORWARD to 1 if you wish to have the ability to forward |
| 222 |
IP packets across network interfaces. If you are going to run lwIP |
| 223 |
on a device with only one network interface, define this to 0. */ |
| 224 |
#define IP_FORWARD 1 |
| 225 |
|
| 226 |
/* IP reassembly and segmentation.These are orthogonal even |
| 227 |
* if they both deal with IP fragments */ |
| 228 |
#define IP_REASSEMBLY 1 |
| 229 |
#define IP_REASS_MAX_PBUFS (10 * ((1500 + PBUF_POOL_BUFSIZE - 1) / PBUF_POOL_BUFSIZE)) |
| 230 |
#define MEMP_NUM_REASSDATA IP_REASS_MAX_PBUFS |
| 231 |
#define IP_FRAG 1 |
| 232 |
#define IPV6_FRAG_COPYHEADER 1 |
| 233 |
|
| 234 |
/* ---------- ICMP options ---------- */ |
| 235 |
#define ICMP_TTL 255 |
| 236 |
|
| 237 |
|
| 238 |
/* ---------- DHCP options ---------- */ |
| 239 |
/* Define LWIP_DHCP to 1 if you want DHCP configuration of |
| 240 |
interfaces. */ |
| 241 |
#define LWIP_DHCP LWIP_UDP |
| 242 |
|
| 243 |
/* 1 if you want to do an ARP check on the offered address |
| 244 |
(recommended). */ |
| 245 |
#define DHCP_DOES_ARP_CHECK (LWIP_DHCP) |
| 246 |
|
| 247 |
|
| 248 |
/* ---------- AUTOIP options ------- */ |
| 249 |
#define LWIP_AUTOIP (LWIP_DHCP) |
| 250 |
#define LWIP_DHCP_AUTOIP_COOP (LWIP_DHCP && LWIP_AUTOIP) |
| 251 |
|
| 252 |
|
| 253 |
/* ---------- UDP options ---------- */ |
| 254 |
#define LWIP_UDP 1 |
| 255 |
#define LWIP_UDPLITE LWIP_UDP |
| 256 |
#define UDP_TTL 255 |
| 257 |
|
| 258 |
|
| 259 |
/* ---------- RAW options ---------- */ |
| 260 |
#define LWIP_RAW 1 |
| 261 |
|
| 262 |
|
| 263 |
/* ---------- Statistics options ---------- */ |
| 264 |
|
| 265 |
#define LWIP_STATS 1 |
| 266 |
#define LWIP_STATS_DISPLAY 1 |
| 267 |
|
| 268 |
#if LWIP_STATS |
| 269 |
#define LINK_STATS 1 |
| 270 |
#define IP_STATS 1 |
| 271 |
#define ICMP_STATS 1 |
| 272 |
#define IGMP_STATS 1 |
| 273 |
#define IPFRAG_STATS 1 |
| 274 |
#define UDP_STATS 1 |
| 275 |
#define TCP_STATS 1 |
| 276 |
#define MEM_STATS 1 |
| 277 |
#define MEMP_STATS 1 |
| 278 |
#define PBUF_STATS 1 |
| 279 |
#define SYS_STATS 1 |
| 280 |
#endif /* LWIP_STATS */ |
| 281 |
|
| 282 |
/* ---------- NETBIOS options ---------- */ |
| 283 |
#define LWIP_NETBIOS_RESPOND_NAME_QUERY 1 |
| 284 |
|
| 285 |
/* ---------- PPP options ---------- */ |
| 286 |
|
| 287 |
#define PPP_SUPPORT 1 /* Set > 0 for PPP */ |
| 288 |
|
| 289 |
#if PPP_SUPPORT |
| 290 |
|
| 291 |
#define NUM_PPP 1 /* Max PPP sessions. */ |
| 292 |
|
| 293 |
|
| 294 |
/* Select modules to enable. Ideally these would be set in the makefile but |
| 295 |
* we're limited by the command line length so you need to modify the settings |
| 296 |
* in this file. |
| 297 |
*/ |
| 298 |
#define PPPOE_SUPPORT 1 |
| 299 |
#define PPPOS_SUPPORT 1 |
| 300 |
|
| 301 |
#define PAP_SUPPORT 1 /* Set > 0 for PAP. */ |
| 302 |
#define CHAP_SUPPORT 1 /* Set > 0 for CHAP. */ |
| 303 |
#define MSCHAP_SUPPORT 0 /* Set > 0 for MSCHAP */ |
| 304 |
#define CBCP_SUPPORT 0 /* Set > 0 for CBCP (NOT FUNCTIONAL!) */ |
| 305 |
#define CCP_SUPPORT 0 /* Set > 0 for CCP */ |
| 306 |
#define VJ_SUPPORT 0 /* Set > 0 for VJ header compression. */ |
| 307 |
#define MD5_SUPPORT 1 /* Set > 0 for MD5 (see also CHAP) */ |
| 308 |
|
| 309 |
#endif /* PPP_SUPPORT */ |
| 310 |
|
| 311 |
#endif /* LWIP_OPTTEST_FILE */ |
| 312 |
|
| 313 |
/* The following defines must be done even in OPTTEST mode: */ |
| 314 |
|
| 315 |
#if !defined(NO_SYS) || !NO_SYS /* default is 0 */ |
| 316 |
void sys_check_core_locking(void); |
| 317 |
#define LWIP_ASSERT_CORE_LOCKED() sys_check_core_locking() |
| 318 |
#endif |
| 319 |
|
| 320 |
#ifndef LWIP_PLATFORM_ASSERT |
| 321 |
/* Define LWIP_PLATFORM_ASSERT to something to catch missing stdio.h includes */ |
| 322 |
void lwip_example_app_platform_assert(const char *msg, int line, const char *file); |
| 323 |
#define LWIP_PLATFORM_ASSERT(x) lwip_example_app_platform_assert(x, __LINE__, __FILE__) |
| 324 |
#endif |
| 325 |
|
| 326 |
#endif /* LWIP_LWIPOPTS_H */ |