| 1 |
IANA-MAU-MIB DEFINITIONS ::= BEGIN |
| 2 |
|
| 3 |
IMPORTS |
| 4 |
MODULE-IDENTITY, OBJECT-IDENTITY, mib-2 |
| 5 |
FROM SNMPv2-SMI |
| 6 |
TEXTUAL-CONVENTION |
| 7 |
FROM SNMPv2-TC |
| 8 |
; |
| 9 |
|
| 10 |
ianaMauMIB MODULE-IDENTITY |
| 11 |
LAST-UPDATED "200704210000Z" -- April 21, 2007 |
| 12 |
ORGANIZATION "IANA" |
| 13 |
CONTACT-INFO " Internet Assigned Numbers Authority |
| 14 |
|
| 15 |
Postal: ICANN |
| 16 |
4676 Admiralty Way, Suite 330 |
| 17 |
Marina del Rey, CA 90292 |
| 18 |
|
| 19 |
Tel: +1-310-823-9358 |
| 20 |
EMail: iana&iana.org" |
| 21 |
|
| 22 |
DESCRIPTION |
| 23 |
"This MIB module defines dot3MauType OBJECT-IDENTITIES and |
| 24 |
IANAifMauListBits, IANAifMauMediaAvailable, |
| 25 |
IANAifMauAutoNegCapBits, and IANAifJackType |
| 26 |
|
| 27 |
TEXTUAL-CONVENTIONs, specifying enumerated values of the |
| 28 |
ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable, |
| 29 |
ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits / |
| 30 |
ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects |
| 31 |
respectively, defined in the MAU-MIB. |
| 32 |
|
| 33 |
It is intended that each new MAU type, Media Availability |
| 34 |
state, Auto Negotiation capability and/or Jack type defined by |
| 35 |
the IEEE 802.3 working group and approved for publication in a |
| 36 |
revision of IEEE Std 802.3 will be added to this MIB module, |
| 37 |
provided that it is suitable for being managed by the base |
| 38 |
objects in the MAU-MIB. An Expert Review, as defined in |
| 39 |
RFC 2434 [RFC2434], is REQUIRED for such additions. |
| 40 |
|
| 41 |
The following reference is used throughout this MIB module: |
| 42 |
|
| 43 |
[IEEE802.3] refers to: |
| 44 |
IEEE Std 802.3, 2005 Edition: 'IEEE Standard for |
| 45 |
Information technology - Telecommunications and information |
| 46 |
exchange between systems - Local and metropolitan area |
| 47 |
networks - Specific requirements - |
| 48 |
Part 3: Carrier sense multiple access with collision |
| 49 |
detection (CSMA/CD) access method and physical layer |
| 50 |
specifications'. |
| 51 |
|
| 52 |
This reference should be updated as appropriate when new |
| 53 |
MAU types, Media Availability states, Auto Negotiation |
| 54 |
capabilities, and/or Jack types are added to this MIB module. |
| 55 |
|
| 56 |
Copyright (C) The IETF Trust (2007). |
| 57 |
The initial version of this MIB module was published in |
| 58 |
RFC 4836; for full legal notices see the RFC itself. |
| 59 |
Supplementary information may be available at: |
| 60 |
http://www.ietf.org/copyrights/ianamib.html" |
| 61 |
|
| 62 |
REVISION "200704210000Z" -- April 21, 2007 |
| 63 |
DESCRIPTION "Initial version of this MIB as published in |
| 64 |
RFC 4836." |
| 65 |
::= { mib-2 154 } |
| 66 |
|
| 67 |
-- Textual Conventions |
| 68 |
|
| 69 |
IANAifMauTypeListBits ::= TEXTUAL-CONVENTION |
| 70 |
STATUS current |
| 71 |
DESCRIPTION |
| 72 |
"This data type is used as the syntax of the ifMauTypeListBits |
| 73 |
object in the (updated) definition of MAU-MIB's ifMauTable. |
| 74 |
|
| 75 |
The most recent version of this textual convention is available |
| 76 |
in the online version of this MIB module on the IANA web site. |
| 77 |
|
| 78 |
Requests for new values should be made to IANA via email |
| 79 |
(iana&iana.org). |
| 80 |
|
| 81 |
Note that changes in this textual convention SHALL be |
| 82 |
synchronized with relevant changes in the dot3MauType |
| 83 |
OBJECT-IDENTITIES." |
| 84 |
REFERENCE |
| 85 |
"[IEEE802.3], Section 30.5.1.1.2" |
| 86 |
SYNTAX BITS { |
| 87 |
bOther(0), -- other or unknown |
| 88 |
bAUI(1), -- AUI |
| 89 |
b10base5(2), -- 10BASE-5 |
| 90 |
bFoirl(3), -- FOIRL |
| 91 |
|
| 92 |
b10base2(4), -- 10BASE-2 |
| 93 |
b10baseT(5), -- 10BASE-T duplex mode unknown |
| 94 |
b10baseFP(6), -- 10BASE-FP |
| 95 |
b10baseFB(7), -- 10BASE-FB |
| 96 |
b10baseFL(8), -- 10BASE-FL duplex mode unknown |
| 97 |
b10broad36(9), -- 10BROAD36 |
| 98 |
b10baseTHD(10), -- 10BASE-T half duplex mode |
| 99 |
b10baseTFD(11), -- 10BASE-T full duplex mode |
| 100 |
b10baseFLHD(12), -- 10BASE-FL half duplex mode |
| 101 |
b10baseFLFD(13), -- 10BASE-FL full duplex mode |
| 102 |
b100baseT4(14), -- 100BASE-T4 |
| 103 |
b100baseTXHD(15), -- 100BASE-TX half duplex mode |
| 104 |
b100baseTXFD(16), -- 100BASE-TX full duplex mode |
| 105 |
b100baseFXHD(17), -- 100BASE-FX half duplex mode |
| 106 |
b100baseFXFD(18), -- 100BASE-FX full duplex mode |
| 107 |
b100baseT2HD(19), -- 100BASE-T2 half duplex mode |
| 108 |
b100baseT2FD(20), -- 100BASE-T2 full duplex mode |
| 109 |
|
| 110 |
b1000baseXHD(21), -- 1000BASE-X half duplex mode |
| 111 |
b1000baseXFD(22), -- 1000BASE-X full duplex mode |
| 112 |
b1000baseLXHD(23), -- 1000BASE-LX half duplex mode |
| 113 |
b1000baseLXFD(24), -- 1000BASE-LX full duplex mode |
| 114 |
b1000baseSXHD(25), -- 1000BASE-SX half duplex mode |
| 115 |
b1000baseSXFD(26), -- 1000BASE-SX full duplex mode |
| 116 |
b1000baseCXHD(27), -- 1000BASE-CX half duplex mode |
| 117 |
b1000baseCXFD(28), -- 1000BASE-CX full duplex mode |
| 118 |
b1000baseTHD(29), -- 1000BASE-T half duplex mode |
| 119 |
b1000baseTFD(30), -- 1000BASE-T full duplex mode |
| 120 |
|
| 121 |
b10GbaseX(31), -- 10GBASE-X |
| 122 |
b10GbaseLX4(32), -- 10GBASE-LX4 |
| 123 |
|
| 124 |
b10GbaseR(33), -- 10GBASE-R |
| 125 |
b10GbaseER(34), -- 10GBASE-ER |
| 126 |
b10GbaseLR(35), -- 10GBASE-LR |
| 127 |
b10GbaseSR(36), -- 10GBASE-SR |
| 128 |
b10GbaseW(37), -- 10GBASE-W |
| 129 |
b10GbaseEW(38), -- 10GBASE-EW |
| 130 |
b10GbaseLW(39), -- 10GBASE-LW |
| 131 |
b10GbaseSW(40), -- 10GBASE-SW |
| 132 |
-- new since RFC 3636 |
| 133 |
b10GbaseCX4(41), -- 10GBASE-CX4 |
| 134 |
b2BaseTL(42), -- 2BASE-TL |
| 135 |
b10PassTS(43), -- 10PASS-TS |
| 136 |
b100BaseBX10D(44), -- 100BASE-BX10D |
| 137 |
b100BaseBX10U(45), -- 100BASE-BX10U |
| 138 |
b100BaseLX10(46), -- 100BASE-LX10 |
| 139 |
b1000BaseBX10D(47), -- 1000BASE-BX10D |
| 140 |
b1000BaseBX10U(48), -- 1000BASE-BX10U |
| 141 |
b1000BaseLX10(49), -- 1000BASE-LX10 |
| 142 |
b1000BasePX10D(50), -- 1000BASE-PX10D |
| 143 |
b1000BasePX10U(51), -- 1000BASE-PX10U |
| 144 |
b1000BasePX20D(52), -- 1000BASE-PX20D |
| 145 |
b1000BasePX20U(53) -- 1000BASE-PX20U |
| 146 |
} |
| 147 |
|
| 148 |
IANAifMauMediaAvailable ::= TEXTUAL-CONVENTION |
| 149 |
STATUS current |
| 150 |
DESCRIPTION |
| 151 |
"This data type is used as the syntax of the |
| 152 |
ifMauMediaAvailable and rpMauMediaAvailable objects in the |
| 153 |
(updated) definition of MAU-MIB's ifMauTable and rpMauTable |
| 154 |
respectively. |
| 155 |
|
| 156 |
Possible values are: |
| 157 |
other(1) - undefined (not listed below) |
| 158 |
unknown(2) - MAU's true state is unknown; e.g., |
| 159 |
during initialization |
| 160 |
available(3) - link, light, or loopback is normal |
| 161 |
notAvailable(4) - link loss, low light, or no loopback |
| 162 |
remoteFault(5) - a fault has been detected at the |
| 163 |
remote end of the link. This value |
| 164 |
applies to 10BASE-FB, 100BASE-T4 Far |
| 165 |
End Fault Indication and non-specified |
| 166 |
remote faults from a system running |
| 167 |
auto-negotiation |
| 168 |
invalidSignal(6) - invalid signal has been received from |
| 169 |
the other end of the link, 10BASE-FB |
| 170 |
only |
| 171 |
remoteJabber(7) - remote fault, due to jabber |
| 172 |
|
| 173 |
remoteLinkLoss(8) - remote fault, due to link loss |
| 174 |
remoteTest(9) - remote fault, due to test |
| 175 |
offline(10) - offline, Clause 37 Auto-Negotiation |
| 176 |
only |
| 177 |
autoNegError(11) - Auto-Negotiation Error, Clause 37 |
| 178 |
Auto-Negotiation only |
| 179 |
pmdLinkFault(12) - PMA/PMD receive link fault. In case |
| 180 |
of PAF (2BASE-TL / 10PASS-TS PHYs), |
| 181 |
all PMEs in the aggregation group have |
| 182 |
detected a link fault |
| 183 |
wisFrameLoss(13) - WIS loss of frame, 10GBASE-W only |
| 184 |
wisSignalLoss(14) - WIS loss of signal, 10GBASE-W only |
| 185 |
pcsLinkFault(15) - PCS receive link fault |
| 186 |
excessiveBER(16) - PCS Bit Error Ratio monitor |
| 187 |
reporting excessive error ratio |
| 188 |
dxsLinkFault(17) - DTE XGXS receive link fault, XAUI only |
| 189 |
pxsLinkFault(18) - PHY XGXS receive link fault, XAUI only |
| 190 |
availableReduced(19) - link normal, reduced bandwidth, |
| 191 |
2BASE-TL / 10PASS-TS only |
| 192 |
ready(20) - at least one PME in the aggregation |
| 193 |
group is detecting handshake tones, |
| 194 |
2BASE-TL / 10PASS-TS only |
| 195 |
|
| 196 |
If the MAU is a 10M b/s link or fiber type (FOIRL, 10BASE-T, |
| 197 |
10BASE-F), then this is equivalent to the link test fail |
| 198 |
state/low light function. For an AUI, 10BASE2, 10BASE5, or |
| 199 |
10BROAD36 MAU, this indicates whether loopback is detected on |
| 200 |
the DI circuit. The value of this attribute persists between |
| 201 |
packets for MAU types AUI, 10BASE5, 10BASE2, 10BROAD36, and |
| 202 |
10BASEFP. |
| 203 |
|
| 204 |
At power-up or following a reset, the Media Available state |
| 205 |
will be unknown(2) for AUI, 10BASE5, 10BASE2, 10BROAD36, and |
| 206 |
10BASE-FP MAUs. For these MAUs loopback will be tested on each |
| 207 |
transmission during which no collision is detected. |
| 208 |
If DI is receiving input when DO returns to IDL after a |
| 209 |
transmission and there has been no collision during the |
| 210 |
transmission, then loopback will be detected. The Media |
| 211 |
Available state will only change during noncollided |
| 212 |
transmissions for AUI, 10BASE2, 10BASE5, 10BROAD36, and |
| 213 |
10BASE-FP MAUs. |
| 214 |
|
| 215 |
For 100BASE-T2, 100BASE-T4, 100BASE-TX, 100BASE-FX, |
| 216 |
100BASE-LX10, and 100BASE-BX10 PHYs the enumerations match the |
| 217 |
states within the link integrity state diagram. |
| 218 |
Any MAU that implements management of [IEEE802.3] Clause |
| 219 |
28 Auto-Negotiation, will map remote fault indication to |
| 220 |
remoteFault(5). |
| 221 |
|
| 222 |
Any MAU that implements management of Clause 37 |
| 223 |
Auto-Negotiation, will map the received RF1 and RF2 bits as |
| 224 |
follows: Offline maps to offline(10), Link_Failure maps to |
| 225 |
remoteFault(5), and Auto-Negotiation Error maps to |
| 226 |
autoNegError(11). |
| 227 |
|
| 228 |
The value remoteFault(5) applies to 10BASE-FB remote |
| 229 |
fault indication, the 100BASE-X far-end fault indication, and |
| 230 |
nonspecified remote faults from a system running Clause 28 |
| 231 |
Auto-Negotiation. |
| 232 |
|
| 233 |
The value remoteJabber(7), remoteLink loss(8), or remoteTest(9) |
| 234 |
SHOULD be used instead of remoteFault(5) where the reason for |
| 235 |
remote fault is identified in the remote signaling protocol. |
| 236 |
Where a Clause 22 MII or Clause 35 GMII is present, a logic |
| 237 |
one in the remote fault bit maps to the value remoteFault(5), |
| 238 |
a logic zero in the link status bit maps to the enumeration |
| 239 |
notAvailable(4). The value notAvailable(4) takes precedence |
| 240 |
over remoteFault(5). |
| 241 |
|
| 242 |
For 2BASE-TL and 10PASS-TS PHYs, the value unknown(2) maps to |
| 243 |
the condition where the PHY (PCS with connected PMEs) is |
| 244 |
initializing, the value ready(20) maps to the condition where |
| 245 |
the interface is down and at least one PME in the aggregation |
| 246 |
group is ready for handshake, the value available(3) maps to |
| 247 |
the condition where all the PMEs in the aggregation group are |
| 248 |
up, the value notAvailable(4) maps to the condition where all |
| 249 |
the PMEs in the aggregation group are down and no handshake |
| 250 |
tones are detected, the value availableReduced(19) maps to the |
| 251 |
condition where the interface is up, a link fault is detected |
| 252 |
at the receive direction by one or more PMEs in the |
| 253 |
aggregation group, but at least one PME is up and the |
| 254 |
enumeration pmdLinkFault(12) maps to the condition where a link |
| 255 |
fault is detected at the receive direction by all of the PMEs |
| 256 |
in the aggregation group. |
| 257 |
|
| 258 |
For 10 Gb/s the enumerations map to value of the link_fault |
| 259 |
variable within the Link Fault Signaling state diagram |
| 260 |
as follows: the value OK maps to the value available(3), |
| 261 |
the value Local Fault maps to the value notAvailable(4), |
| 262 |
and the value Remote Fault maps to the value remoteFault(5). |
| 263 |
The value pmdLinkFault(12), wisFrameLoss(13), |
| 264 |
wisSignalLoss(14), pcsLinkFault(15), excessiveBER(16), or |
| 265 |
dxsLinkFault(17) SHOULD be used instead of the value |
| 266 |
notAvailable(4), where the reason for the Local Fault state can |
| 267 |
be identified through the use of the Clause 45 MDIO Interface. |
| 268 |
Where multiple reasons for the Local Fault state can be |
| 269 |
identified, only the highest precedence error SHOULD be |
| 270 |
|
| 271 |
reported. This precedence in descending order is as follows: |
| 272 |
|
| 273 |
pxsLinkFault |
| 274 |
pmdLinkFault |
| 275 |
wisFrameLoss |
| 276 |
wisSignalLoss |
| 277 |
pcsLinkFault |
| 278 |
excessiveBER |
| 279 |
dxsLinkFault. |
| 280 |
|
| 281 |
Where a Clause 45 MDIO interface is present a logic zero in |
| 282 |
the PMA/PMD Receive link status bit ([IEEE802.3] |
| 283 |
Section 45.2.1.2.2) maps to the value pmdLinkFault(12), |
| 284 |
logic one in the LOF status bit (Section 45.2.2.10.4) maps |
| 285 |
to the value wisFrameLoss(13), a logic one in the LOS |
| 286 |
status bit (Section 45.2.2.10.5) maps to the value |
| 287 |
wisSignalLoss, a logic zero in the PCS Receive |
| 288 |
link status bit (Section 45.2.3.2.2) maps to the value |
| 289 |
pcsLinkFault(15), a logic one in the 10GBASE-R PCS Latched |
| 290 |
high BER status bit (Section 45.2.3.12.2) maps to the value |
| 291 |
excessiveBER, a logic zero in the DTE XS receive link status |
| 292 |
bit (Section 45.2.5.2.2) maps to the value dxsLinkFault(17) |
| 293 |
and a logic zero in the PHY XS transmit link status bit |
| 294 |
(Section 45.2.4.2.2) maps to the value pxsLinkFault(18). |
| 295 |
|
| 296 |
The most recent version of this textual convention is available |
| 297 |
in the online version of this MIB module on the IANA web site. |
| 298 |
|
| 299 |
Requests for new values should be made to IANA via email |
| 300 |
(iana&iana.org)." |
| 301 |
REFERENCE |
| 302 |
"[IEEE802.3], Section 30.5.1.1.4" |
| 303 |
SYNTAX INTEGER { |
| 304 |
other(1), |
| 305 |
unknown(2), |
| 306 |
available(3), |
| 307 |
notAvailable(4), |
| 308 |
remoteFault(5), |
| 309 |
invalidSignal(6), |
| 310 |
remoteJabber(7), |
| 311 |
remoteLinkLoss(8), |
| 312 |
remoteTest(9), |
| 313 |
offline(10), |
| 314 |
autoNegError(11), |
| 315 |
pmdLinkFault(12), |
| 316 |
wisFrameLoss(13), |
| 317 |
wisSignalLoss(14), |
| 318 |
pcsLinkFault(15), |
| 319 |
|
| 320 |
excessiveBER(16), |
| 321 |
dxsLinkFault(17), |
| 322 |
pxsLinkFault(18), |
| 323 |
availableReduced(19), |
| 324 |
ready(20) |
| 325 |
} |
| 326 |
|
| 327 |
IANAifMauAutoNegCapBits ::= TEXTUAL-CONVENTION |
| 328 |
STATUS current |
| 329 |
DESCRIPTION |
| 330 |
"This data type is used as the syntax of the |
| 331 |
ifMauAutoNegCapabilityBits, ifMauAutoNegCapAdvertisedBits, and |
| 332 |
ifMauAutoNegCapReceivedBits objects in the (updated) definition |
| 333 |
of MAU-MIB's ifMauAutoNegTable. |
| 334 |
|
| 335 |
The most recent version of this textual convention is available |
| 336 |
in the online version of this MIB module on the IANA web site. |
| 337 |
|
| 338 |
Requests for new values should be made to IANA via email |
| 339 |
(iana&iana.org)." |
| 340 |
REFERENCE |
| 341 |
"[IEEE802.3], Section 30.6.1.1.5" |
| 342 |
SYNTAX BITS { |
| 343 |
bOther(0), -- other or unknown |
| 344 |
b10baseT(1), -- 10BASE-T half duplex mode |
| 345 |
b10baseTFD(2), -- 10BASE-T full duplex mode |
| 346 |
b100baseT4(3), -- 100BASE-T4 |
| 347 |
b100baseTX(4), -- 100BASE-TX half duplex mode |
| 348 |
b100baseTXFD(5), -- 100BASE-TX full duplex mode |
| 349 |
b100baseT2(6), -- 100BASE-T2 half duplex mode |
| 350 |
b100baseT2FD(7), -- 100BASE-T2 full duplex mode |
| 351 |
bFdxPause(8), -- PAUSE for full-duplex links |
| 352 |
bFdxAPause(9), -- Asymmetric PAUSE for full-duplex |
| 353 |
-- links |
| 354 |
bFdxSPause(10), -- Symmetric PAUSE for full-duplex |
| 355 |
-- links |
| 356 |
bFdxBPause(11), -- Asymmetric and Symmetric PAUSE for |
| 357 |
-- full-duplex links |
| 358 |
b1000baseX(12), -- 1000BASE-X, -LX, -SX, -CX half |
| 359 |
-- duplex mode |
| 360 |
b1000baseXFD(13), -- 1000BASE-X, -LX, -SX, -CX full |
| 361 |
-- duplex mode |
| 362 |
b1000baseT(14), -- 1000BASE-T half duplex mode |
| 363 |
b1000baseTFD(15) -- 1000BASE-T full duplex mode |
| 364 |
} |
| 365 |
|
| 366 |
IANAifJackType ::= TEXTUAL-CONVENTION |
| 367 |
STATUS current |
| 368 |
|
| 369 |
DESCRIPTION |
| 370 |
"Common enumeration values for repeater and interface MAU |
| 371 |
jack types. This data type is used as the syntax of the |
| 372 |
ifJackType and rpJackType objects in the (updated) definition |
| 373 |
of MAU-MIB's ifJackTable and rpJackTable respectively. |
| 374 |
|
| 375 |
Possible values are: |
| 376 |
other(1) - undefined or unknown |
| 377 |
rj45(2) - RJ45 |
| 378 |
rj45S(3) - RJ45 shielded |
| 379 |
db9(4) - DB9 |
| 380 |
bnc(5) - BNC |
| 381 |
fAUI(6) - AUI female |
| 382 |
mAUI(7) - AUI male |
| 383 |
fiberSC(8) - SC fiber |
| 384 |
fiberMIC(9) - MIC fiber |
| 385 |
fiberST(10) - ST fiber |
| 386 |
telco(11) - Telco |
| 387 |
mtrj(12) - MT-RJ fiber |
| 388 |
hssdc(13) - fiber channel style-2 |
| 389 |
fiberLC(14) - LC fiber |
| 390 |
cx4(15) - IB4X for 10GBASE-CX4 |
| 391 |
|
| 392 |
The most recent version of this textual convention is available |
| 393 |
in the online version of this MIB module on the IANA web site. |
| 394 |
|
| 395 |
Requests for new values should be made to IANA via email |
| 396 |
(iana&iana.org)." |
| 397 |
SYNTAX INTEGER { |
| 398 |
other(1), |
| 399 |
rj45(2), |
| 400 |
rj45S(3), |
| 401 |
db9(4), |
| 402 |
bnc(5), |
| 403 |
fAUI(6), |
| 404 |
mAUI(7), |
| 405 |
fiberSC(8), |
| 406 |
fiberMIC(9), |
| 407 |
fiberST(10), |
| 408 |
telco(11), |
| 409 |
mtrj(12), |
| 410 |
hssdc(13), |
| 411 |
fiberLC(14), |
| 412 |
-- new since RFC 3636 |
| 413 |
cx4(15) |
| 414 |
} |
| 415 |
|
| 416 |
-- OBJECT IDENTITIES for MAU types |
| 417 |
|
| 418 |
-- (see rpMauType and ifMauType of MAU-MIB for usage) |
| 419 |
-- The following definitions has been moved from RFC 3636 and |
| 420 |
-- no longer appear in its revision. |
| 421 |
|
| 422 |
dot3MauType OBJECT IDENTIFIER ::= { mib-2 snmpDot3MauMgt(26) 4 } |
| 423 |
|
| 424 |
dot3MauTypeAUI OBJECT-IDENTITY |
| 425 |
STATUS current |
| 426 |
DESCRIPTION "no internal MAU, view from AUI" |
| 427 |
REFERENCE "[IEEE802.3], Section 7" |
| 428 |
::= { dot3MauType 1 } |
| 429 |
|
| 430 |
dot3MauType10Base5 OBJECT-IDENTITY |
| 431 |
STATUS current |
| 432 |
DESCRIPTION "thick coax MAU" |
| 433 |
REFERENCE "[IEEE802.3], Section 7" |
| 434 |
::= { dot3MauType 2 } |
| 435 |
|
| 436 |
dot3MauTypeFoirl OBJECT-IDENTITY |
| 437 |
STATUS current |
| 438 |
DESCRIPTION "FOIRL MAU" |
| 439 |
REFERENCE "[IEEE802.3], Section 9.9" |
| 440 |
::= { dot3MauType 3 } |
| 441 |
|
| 442 |
dot3MauType10Base2 OBJECT-IDENTITY |
| 443 |
STATUS current |
| 444 |
DESCRIPTION "thin coax MAU" |
| 445 |
REFERENCE "[IEEE802.3], Section 10" |
| 446 |
::= { dot3MauType 4 } |
| 447 |
|
| 448 |
dot3MauType10BaseT OBJECT-IDENTITY |
| 449 |
STATUS current |
| 450 |
DESCRIPTION "UTP MAU. |
| 451 |
Note that it is strongly recommended that |
| 452 |
agents return either dot3MauType10BaseTHD or |
| 453 |
dot3MauType10BaseTFD if the duplex mode is |
| 454 |
known. However, management applications should |
| 455 |
be prepared to receive this MAU type value from |
| 456 |
older agent implementations." |
| 457 |
REFERENCE "[IEEE802.3], Section 14" |
| 458 |
::= { dot3MauType 5 } |
| 459 |
|
| 460 |
dot3MauType10BaseFP OBJECT-IDENTITY |
| 461 |
STATUS current |
| 462 |
DESCRIPTION "passive fiber MAU" |
| 463 |
REFERENCE "[IEEE802.3], Section 16" |
| 464 |
::= { dot3MauType 6 } |
| 465 |
|
| 466 |
dot3MauType10BaseFB OBJECT-IDENTITY |
| 467 |
STATUS current |
| 468 |
DESCRIPTION "sync fiber MAU" |
| 469 |
REFERENCE "[IEEE802.3], Section 17" |
| 470 |
::= { dot3MauType 7 } |
| 471 |
|
| 472 |
dot3MauType10BaseFL OBJECT-IDENTITY |
| 473 |
STATUS current |
| 474 |
DESCRIPTION "async fiber MAU. |
| 475 |
Note that it is strongly recommended that |
| 476 |
agents return either dot3MauType10BaseFLHD or |
| 477 |
dot3MauType10BaseFLFD if the duplex mode is |
| 478 |
known. However, management applications should |
| 479 |
be prepared to receive this MAU type value from |
| 480 |
older agent implementations." |
| 481 |
REFERENCE "[IEEE802.3], Section 18" |
| 482 |
::= { dot3MauType 8 } |
| 483 |
|
| 484 |
dot3MauType10Broad36 OBJECT-IDENTITY |
| 485 |
STATUS current |
| 486 |
DESCRIPTION "broadband DTE MAU. |
| 487 |
Note that 10BROAD36 MAUs can be attached to |
| 488 |
interfaces but not to repeaters." |
| 489 |
REFERENCE "[IEEE802.3], Section 11" |
| 490 |
::= { dot3MauType 9 } |
| 491 |
|
| 492 |
------ new since RFC 1515: |
| 493 |
dot3MauType10BaseTHD OBJECT-IDENTITY |
| 494 |
STATUS current |
| 495 |
DESCRIPTION "UTP MAU, half duplex mode" |
| 496 |
REFERENCE "[IEEE802.3], Section 14" |
| 497 |
::= { dot3MauType 10 } |
| 498 |
|
| 499 |
dot3MauType10BaseTFD OBJECT-IDENTITY |
| 500 |
STATUS current |
| 501 |
DESCRIPTION "UTP MAU, full duplex mode" |
| 502 |
REFERENCE "[IEEE802.3], Section 14" |
| 503 |
::= { dot3MauType 11 } |
| 504 |
|
| 505 |
dot3MauType10BaseFLHD OBJECT-IDENTITY |
| 506 |
STATUS current |
| 507 |
DESCRIPTION "async fiber MAU, half duplex mode" |
| 508 |
REFERENCE "[IEEE802.3], Section 18" |
| 509 |
::= { dot3MauType 12 } |
| 510 |
|
| 511 |
dot3MauType10BaseFLFD OBJECT-IDENTITY |
| 512 |
STATUS current |
| 513 |
DESCRIPTION "async fiber MAU, full duplex mode" |
| 514 |
|
| 515 |
REFERENCE "[IEEE802.3], Section 18" |
| 516 |
::= { dot3MauType 13 } |
| 517 |
|
| 518 |
dot3MauType100BaseT4 OBJECT-IDENTITY |
| 519 |
STATUS current |
| 520 |
DESCRIPTION "4 pair category 3 UTP" |
| 521 |
REFERENCE "[IEEE802.3], Section 23" |
| 522 |
::= { dot3MauType 14 } |
| 523 |
|
| 524 |
dot3MauType100BaseTXHD OBJECT-IDENTITY |
| 525 |
STATUS current |
| 526 |
DESCRIPTION "2 pair category 5 UTP, half duplex mode" |
| 527 |
REFERENCE "[IEEE802.3], Section 25" |
| 528 |
::= { dot3MauType 15 } |
| 529 |
|
| 530 |
dot3MauType100BaseTXFD OBJECT-IDENTITY |
| 531 |
STATUS current |
| 532 |
DESCRIPTION "2 pair category 5 UTP, full duplex mode" |
| 533 |
REFERENCE "[IEEE802.3], Section 25" |
| 534 |
::= { dot3MauType 16 } |
| 535 |
|
| 536 |
dot3MauType100BaseFXHD OBJECT-IDENTITY |
| 537 |
STATUS current |
| 538 |
DESCRIPTION "X fiber over PMT, half duplex mode" |
| 539 |
REFERENCE "[IEEE802.3], Section 26" |
| 540 |
::= { dot3MauType 17 } |
| 541 |
|
| 542 |
dot3MauType100BaseFXFD OBJECT-IDENTITY |
| 543 |
STATUS current |
| 544 |
DESCRIPTION "X fiber over PMT, full duplex mode" |
| 545 |
REFERENCE "[IEEE802.3], Section 26" |
| 546 |
::= { dot3MauType 18 } |
| 547 |
|
| 548 |
dot3MauType100BaseT2HD OBJECT-IDENTITY |
| 549 |
STATUS current |
| 550 |
DESCRIPTION "2 pair category 3 UTP, half duplex mode" |
| 551 |
REFERENCE "[IEEE802.3], Section 32" |
| 552 |
::= { dot3MauType 19 } |
| 553 |
|
| 554 |
dot3MauType100BaseT2FD OBJECT-IDENTITY |
| 555 |
STATUS current |
| 556 |
DESCRIPTION "2 pair category 3 UTP, full duplex mode" |
| 557 |
REFERENCE "[IEEE802.3], Section 32" |
| 558 |
::= { dot3MauType 20 } |
| 559 |
|
| 560 |
------ new since RFC 2239: |
| 561 |
dot3MauType1000BaseXHD OBJECT-IDENTITY |
| 562 |
STATUS current |
| 563 |
|
| 564 |
DESCRIPTION "PCS/PMA, unknown PMD, half duplex mode" |
| 565 |
REFERENCE "[IEEE802.3], Section 36" |
| 566 |
::= { dot3MauType 21 } |
| 567 |
|
| 568 |
dot3MauType1000BaseXFD OBJECT-IDENTITY |
| 569 |
STATUS current |
| 570 |
DESCRIPTION "PCS/PMA, unknown PMD, full duplex mode" |
| 571 |
REFERENCE "[IEEE802.3], Section 36" |
| 572 |
::= { dot3MauType 22 } |
| 573 |
|
| 574 |
dot3MauType1000BaseLXHD OBJECT-IDENTITY |
| 575 |
STATUS current |
| 576 |
DESCRIPTION "Fiber over long-wavelength laser, half duplex |
| 577 |
mode" |
| 578 |
REFERENCE "[IEEE802.3], Section 38" |
| 579 |
::= { dot3MauType 23 } |
| 580 |
|
| 581 |
dot3MauType1000BaseLXFD OBJECT-IDENTITY |
| 582 |
STATUS current |
| 583 |
DESCRIPTION "Fiber over long-wavelength laser, full duplex |
| 584 |
mode" |
| 585 |
REFERENCE "[IEEE802.3], Section 38" |
| 586 |
::= { dot3MauType 24 } |
| 587 |
|
| 588 |
dot3MauType1000BaseSXHD OBJECT-IDENTITY |
| 589 |
STATUS current |
| 590 |
DESCRIPTION "Fiber over short-wavelength laser, half |
| 591 |
duplex mode" |
| 592 |
REFERENCE "[IEEE802.3], Section 38" |
| 593 |
::= { dot3MauType 25 } |
| 594 |
|
| 595 |
dot3MauType1000BaseSXFD OBJECT-IDENTITY |
| 596 |
STATUS current |
| 597 |
DESCRIPTION "Fiber over short-wavelength laser, full |
| 598 |
duplex mode" |
| 599 |
REFERENCE "[IEEE802.3], Section 38" |
| 600 |
::= { dot3MauType 26 } |
| 601 |
|
| 602 |
dot3MauType1000BaseCXHD OBJECT-IDENTITY |
| 603 |
STATUS current |
| 604 |
DESCRIPTION "Copper over 150-Ohm balanced cable, half |
| 605 |
duplex mode" |
| 606 |
REFERENCE "[IEEE802.3], Section 39" |
| 607 |
::= { dot3MauType 27 } |
| 608 |
|
| 609 |
dot3MauType1000BaseCXFD OBJECT-IDENTITY |
| 610 |
STATUS current |
| 611 |
DESCRIPTION "Copper over 150-Ohm balanced cable, full |
| 612 |
|
| 613 |
duplex mode" |
| 614 |
REFERENCE "[IEEE802.3], Section 39" |
| 615 |
::= { dot3MauType 28 } |
| 616 |
|
| 617 |
dot3MauType1000BaseTHD OBJECT-IDENTITY |
| 618 |
STATUS current |
| 619 |
DESCRIPTION "Four-pair Category 5 UTP, half duplex mode" |
| 620 |
REFERENCE "[IEEE802.3], Section 40" |
| 621 |
::= { dot3MauType 29 } |
| 622 |
|
| 623 |
dot3MauType1000BaseTFD OBJECT-IDENTITY |
| 624 |
STATUS current |
| 625 |
DESCRIPTION "Four-pair Category 5 UTP, full duplex mode" |
| 626 |
REFERENCE "[IEEE802.3], Section 40" |
| 627 |
::= { dot3MauType 30 } |
| 628 |
|
| 629 |
------ new since RFC 2668: |
| 630 |
dot3MauType10GigBaseX OBJECT-IDENTITY |
| 631 |
STATUS current |
| 632 |
DESCRIPTION "X PCS/PMA, unknown PMD." |
| 633 |
REFERENCE "[IEEE802.3], Section 48" |
| 634 |
::= { dot3MauType 31 } |
| 635 |
|
| 636 |
dot3MauType10GigBaseLX4 OBJECT-IDENTITY |
| 637 |
STATUS current |
| 638 |
DESCRIPTION "X fiber over WWDM optics" |
| 639 |
REFERENCE "[IEEE802.3], Section 53" |
| 640 |
::= { dot3MauType 32 } |
| 641 |
|
| 642 |
dot3MauType10GigBaseR OBJECT-IDENTITY |
| 643 |
STATUS current |
| 644 |
DESCRIPTION "R PCS/PMA, unknown PMD." |
| 645 |
REFERENCE "[IEEE802.3], Section 49" |
| 646 |
::= { dot3MauType 33 } |
| 647 |
|
| 648 |
dot3MauType10GigBaseER OBJECT-IDENTITY |
| 649 |
STATUS current |
| 650 |
DESCRIPTION "R fiber over 1550 nm optics" |
| 651 |
REFERENCE "[IEEE802.3], Section 52" |
| 652 |
::= { dot3MauType 34 } |
| 653 |
|
| 654 |
dot3MauType10GigBaseLR OBJECT-IDENTITY |
| 655 |
STATUS current |
| 656 |
DESCRIPTION "R fiber over 1310 nm optics" |
| 657 |
REFERENCE "[IEEE802.3], Section 52" |
| 658 |
::= { dot3MauType 35 } |
| 659 |
|
| 660 |
dot3MauType10GigBaseSR OBJECT-IDENTITY |
| 661 |
|
| 662 |
STATUS current |
| 663 |
DESCRIPTION "R fiber over 850 nm optics" |
| 664 |
REFERENCE "[IEEE802.3], Section 52" |
| 665 |
::= { dot3MauType 36 } |
| 666 |
|
| 667 |
dot3MauType10GigBaseW OBJECT-IDENTITY |
| 668 |
STATUS current |
| 669 |
DESCRIPTION "W PCS/PMA, unknown PMD." |
| 670 |
REFERENCE "[IEEE802.3], Section 49 and 50" |
| 671 |
::= { dot3MauType 37 } |
| 672 |
|
| 673 |
dot3MauType10GigBaseEW OBJECT-IDENTITY |
| 674 |
STATUS current |
| 675 |
DESCRIPTION "W fiber over 1550 nm optics" |
| 676 |
REFERENCE "[IEEE802.3], Section 52" |
| 677 |
::= { dot3MauType 38 } |
| 678 |
|
| 679 |
dot3MauType10GigBaseLW OBJECT-IDENTITY |
| 680 |
STATUS current |
| 681 |
DESCRIPTION "W fiber over 1310 nm optics" |
| 682 |
REFERENCE "[IEEE802.3], Section 52" |
| 683 |
::= { dot3MauType 39 } |
| 684 |
|
| 685 |
dot3MauType10GigBaseSW OBJECT-IDENTITY |
| 686 |
STATUS current |
| 687 |
DESCRIPTION "W fiber over 850 nm optics" |
| 688 |
REFERENCE "[IEEE802.3], Section 52" |
| 689 |
::= { dot3MauType 40 } |
| 690 |
|
| 691 |
------ new since RFC 3636: |
| 692 |
dot3MauType10GigBaseCX4 OBJECT-IDENTITY |
| 693 |
STATUS current |
| 694 |
DESCRIPTION "X copper over 8 pair 100-Ohm balanced cable" |
| 695 |
REFERENCE "[IEEE802.3], Section 54" |
| 696 |
::= { dot3MauType 41 } |
| 697 |
|
| 698 |
dot3MauType2BaseTL OBJECT-IDENTITY |
| 699 |
STATUS current |
| 700 |
DESCRIPTION "Voice grade UTP copper, up to 2700m, optional PAF" |
| 701 |
REFERENCE "[IEEE802.3], Sections 61 and 63" |
| 702 |
::= { dot3MauType 42 } |
| 703 |
|
| 704 |
dot3MauType10PassTS OBJECT-IDENTITY |
| 705 |
STATUS current |
| 706 |
DESCRIPTION "Voice grade UTP copper, up to 750m, optional PAF" |
| 707 |
REFERENCE "[IEEE802.3], Sections 61 and 62" |
| 708 |
::= { dot3MauType 43 } |
| 709 |
|
| 710 |
dot3MauType100BaseBX10D OBJECT-IDENTITY |
| 711 |
STATUS current |
| 712 |
DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km" |
| 713 |
REFERENCE "[IEEE802.3], Section 58" |
| 714 |
::= { dot3MauType 44 } |
| 715 |
|
| 716 |
dot3MauType100BaseBX10U OBJECT-IDENTITY |
| 717 |
STATUS current |
| 718 |
DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km" |
| 719 |
REFERENCE "[IEEE802.3], Section 58" |
| 720 |
::= { dot3MauType 45 } |
| 721 |
|
| 722 |
dot3MauType100BaseLX10 OBJECT-IDENTITY |
| 723 |
STATUS current |
| 724 |
DESCRIPTION "Two single-mode fibers, long wavelength, 10km" |
| 725 |
REFERENCE "[IEEE802.3], Section 58" |
| 726 |
::= { dot3MauType 46 } |
| 727 |
|
| 728 |
dot3MauType1000BaseBX10D OBJECT-IDENTITY |
| 729 |
STATUS current |
| 730 |
DESCRIPTION "One single-mode fiber OLT, long wavelength, 10km" |
| 731 |
REFERENCE "[IEEE802.3], Section 59" |
| 732 |
::= { dot3MauType 47 } |
| 733 |
|
| 734 |
dot3MauType1000BaseBX10U OBJECT-IDENTITY |
| 735 |
STATUS current |
| 736 |
DESCRIPTION "One single-mode fiber ONU, long wavelength, 10km" |
| 737 |
REFERENCE "[IEEE802.3], Section 59" |
| 738 |
::= { dot3MauType 48 } |
| 739 |
|
| 740 |
dot3MauType1000BaseLX10 OBJECT-IDENTITY |
| 741 |
STATUS current |
| 742 |
DESCRIPTION "Two sigle-mode fiber, long wavelength, 10km" |
| 743 |
REFERENCE "[IEEE802.3], Section 59" |
| 744 |
::= { dot3MauType 49 } |
| 745 |
|
| 746 |
dot3MauType1000BasePX10D OBJECT-IDENTITY |
| 747 |
STATUS current |
| 748 |
DESCRIPTION "One single-mode fiber EPON OLT, 10km" |
| 749 |
REFERENCE "[IEEE802.3], Section 60" |
| 750 |
::= { dot3MauType 50 } |
| 751 |
|
| 752 |
dot3MauType1000BasePX10U OBJECT-IDENTITY |
| 753 |
STATUS current |
| 754 |
DESCRIPTION "One single-mode fiber EPON ONU, 10km" |
| 755 |
REFERENCE "[IEEE802.3], Section 60" |
| 756 |
::= { dot3MauType 51 } |
| 757 |
|
| 758 |
dot3MauType1000BasePX20D OBJECT-IDENTITY |
| 759 |
STATUS current |
| 760 |
DESCRIPTION "One single-mode fiber EPON OLT, 20km" |
| 761 |
REFERENCE "[IEEE802.3], Section 60" |
| 762 |
::= { dot3MauType 52 } |
| 763 |
|
| 764 |
dot3MauType1000BasePX20U OBJECT-IDENTITY |
| 765 |
STATUS current |
| 766 |
DESCRIPTION "One single-mode fiber EPON ONU, 20km" |
| 767 |
REFERENCE "[IEEE802.3], Section 60" |
| 768 |
::= { dot3MauType 53 } |
| 769 |
|
| 770 |
END |