Debian Codegraph @

ChangeLog

raw
1 2018-03-09: 2.2.3
2 enhaencement: supporting includes with new filter and filterFrom options
3 change: needing now at least Lua 5.2 (Lua 5.1 no longer supported, Lua5.3 supported)
4 change: if the target/targetdir ends with a ':' do not append
5 a trailing '/' to it, since that would change it from homedir to rootdir!
6 add: example for Amazon S3 Bucket (Daniel Miranda)
7 fix: setting stdout/stderr to linebuffer mode.
8 fix: Lua5.3 compatiblity, using load() instead of loadstring()
9 fix: cmake lua detection, will resort to "lua" and "luac" binaries only if
10 more specific suffixes (e.g. luac5.3) are not available
11 fix: test suit, Lua5.3 compatibility (table.unpack)
12
13 2017-02-16: 2.2.2
14 fix: checkgauge 'insist'
15 fix: no partial path exlusion tests
16 fix: write pid of forked process in pidfile
17 fix: crash on not reachable target
18 workaround:
19 changed back to filter style rsync calling
20 until https://bugzilla.samba.org/show_bug.cgi?id=12569
21 is fixed and released.
22
23 2017-01-05: 2.2.1
24 enhancement: now always using filter lists with rysnc
25 instead of include/exclude lists taking advantage of the new --delete-missing-args
26 parameter to delete files on target.
27 >>> Thus Lsyncd 2.2.1 needs rsync >= 3.1.0
28 change: added "tests" make target to run all the tests.
29 fix: crash due to typo in changed ^path, ^pathdir, ^pathname
30
31 2017-01-04: 2.2.0
32 enhancement: add rsync options:
33 "append",
34 "append_verify",
35 "backup",
36 "backup_dir",
37 "chmod",
38 "chown",
39 "copy_dirlinks",
40 "existing",
41 "groupmap",
42 "omit_dir_times",
43 "omit_link_times",
44 "suffix,"
45 "usermap",
46 enhancement: settings{ } now checks for unknown entries and errors if so.
47 change: Level3 scripts ^path,^pathdir and ^pathname now don't start with a slash.
48 change: Lsyncd now writes a startup log message before daemonizing
49 does in case logging fails, it is recognized before it cannot
50 message anything about it, since it deamonized
51 change: compatible with Lua5.3 (along with 5.1 and 5.2)
52 change: _verbatim forced for 'exitcodes' entry.
53 change: manpage is not rebuild by default.
54 it is provided precompiled.
55 change: faulty/deprecated config files that use settings = { ... }, with equal sign
56 are no longer worked around.
57 change: default.direct now calls copy with -p
58 fix: potential race conditions:
59 default.rsyncssh will now channel deletes also through rsync and treats moves
60 as blocking events.
61 fix: ']' is not escaped for rsync rules, since rsync only applies
62 doesn't applie pattern matching if no other pattern chars
63 are found.
64 fix: Shell injection hole close for default.direct on mv commands. (Marcin Szewczyk)
65 fix: Crash of default-direct when source doesn't exit (Michael Ploujnikov)
66 fix: fixed faulty event replacement,
67 a race condition noticed by extensive default.rsyncssh testing
68 changed Delays were not reflected in Events
69
70 2015-10-15: 2.1.6
71 enhancement: Lsyncd now locks its pidfile
72 enhancement: added ssh.identifyFile and ssh.options options
73 enhancement: added rsync inplace option
74 fix: ignore blank lines and rsync commenits in exclude files (David Reiss)
75 fix: don't tread exclude lines with embedded "+" chars as inclusions (David Reiss)
76 fix: crash when debugging inotify (Michael Ploujnikov)
77 fix: fixed Finished/Retrying error messages being swapped around (Jun Saito)
78 fix: properly encapsulate filenames on ssh mv commands to avoid shell command injections.
79 fix: postcmd example (Timo Teräs)
80 change: closes also on INT signals
81 change: now removes its pidfile on INT and TERM signals
82 change: changed build system from autotools to cmake
83
84 2013-06-07: 2.1.5
85 enhancement: Added rsync options: bwlimit, timeout
86 fix: Specifying ssh port no longer overwrites the last rsync option
87 fix: rsync option password_file is now accepted
88 fix: onAttrib is accepted again
89 fix: -log Exec now prints now fully all arguments
90 fix: configure script lua detection now includes math lib to workaround
91 wrongly created "needs COMPAT_ALL" messages.
92 fix: repaired variable replacement for layer 3 scripts
93 fix: config.delay is now checked to a number >= 0
94 change: a2x is no longer checked by configure script.
95 should not be needed when building from tarball
96
97 2012-11-24: 2.1.4
98 fix: making ssh custom port changes work with ssh and rsync
99
100 2012-11-23: 2.1.3
101 fix: fixed 2 crash conditions due to failure to read 'uSettings'
102
103 2012-11-03: 2.1.2
104 fix: added excludeFrom to checkgauge (thx to DavidWittman)
105 fix: fixed rsync option computation
106 enhancement: added password_file file option to rsync
107
108 2012-10-27: 2.1.1
109 fix: fix rsync.rsh, rsync.rsync_path, rsync.tmp_dir, rsync._extra parameters
110 thanks go to Birger Schmidt for this fix.
111
112 2012-10-23: 2.1.0
113 fix: fail startup if settings.inist is false and one of the target hosts fails
114 fix: in case of waiting for processes during restart only logs this state now once a minute
115 rather than filling the log crazy about it
116 enhancement: rsyncOpts has been replaced by rsync = {...} parameter lists
117 enhancement: default.rsyncssh has now a ssh = {...} parameter similar to default.rsync to
118 add option to ssh calls. Ditto for xargs = {...}
119 enhancement: the default.* implementations have a checkgauge erroring on any unknown
120 parameters to the sync{} call
121 enhancement: the delete parameter now takes: true, false, 'running' and 'startup'
122 improvement: Dennis Schridde provided various improvements for Lsyncd's autoconf building
123 change: Lsyncd is now Lua 5.2 compatible
124 change: Lsyncd now exits with exitcode 143 on TERM signal
125 change: settings is now be used as call like settings{...} instead of settings = {...}
126
127 2012-04-04: 2.0.7
128 fix: closed a memory leak due to not correct configured weak tables
129 fix: default.direct, do not use on OSX unrecognized option -t on modify
130 fix: default.direct, typo leading to compile error
131 fix: when using settings.inotifyMode = "Modify" events were longer ignored
132 fix: layer 3 function generator was messed up.
133 change: now uses a2x to generate the manpage (thus more compatible across distros)
134 change: removed --with-default-runner since it was broken, and will be replaced by something
135 more generic in future
136
137 2012-02-16: 2.0.6
138 fix: no longer stops syslogging on HUP signals
139 fix: OSX event watcher no longer misses moves into and out of the watch tree
140 fix: not refinding a relative path to the config file in case of HUP.
141 fix: rsync doing error 13 and killing Lsyncd.
142 see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=659941
143 fix: no event creation during shutdown (might loop before)
144 fix: no logging due to wrong log levels
145 fix: without-inotify compile option now works to compile on OSX
146 fix: in case of HUP-reset imply insist=true, since startup is known to be
147 configured correctly.
148 fix: a series of typos in comments, manpage etc.
149 fix: moves to and from deleted directories (deleted when Lsyncd gets notified)
150 were not correctly translated
151 fix: added --ignore-errors to rsync when deleting files, so it will not miss a delete
152 even when another part of the tree made an IO-error.
153 fix: default.direct now not using -p for mkdir since if the dir is not there it should fail
154 fix: default.direct now not using -t for cp since OSX binutils doesn't understand it
155 fix: some files might have been missed in splitting move events (especially on tests on OSX)
156 change: complain if any "rsyncOps" is given
157 change: splitted the default configurations in their own files.
158 more cleanly seperated from the Lsyncd runner, and highlights it are just
159 Layer 1 configurations that happen to be provided by default.
160 change: Beautified the code, no extra spaces at line end, ' instead of ",
161 supposing 100 char width to view,
162 change: Lsyncd now remembers the absolute path of its config file during HUPs
163 enhancement: Defaults now respect a 'delete=false' flag when set as parameter to sync{}
164 default.rsync: does not add --delete to rsync
165 default.rsyncssh: does not add --delete to rsync, and does not use rm via ssh tunnel
166 default.direct: does not add --delete to startup rsync and does not use rm
167
168 2011-08-25: 2.0.5
169 fix: Lsyncd will now terminate if it inotify watching exceeds
170 its preset limit.
171 fix: rsync error exit code 12 now results in retries.
172 fix: Lsyncd 2.0.5 should now compile better on a bit elder
173 GNU/Linux versions.
174 fix: examples are now installed in the configured document directory.
175 fix: partial transfers during startup are considered ok. Lsyncd will
176 rework the specified files anyway.
177 change: Layer 1 interface init() now receives an "Init" event instead
178 of an inlet.
179 change: builtin Lua code is now loaded via a c-array.
180 Now more portable and correct memory flags are set.
181 change: Lsyncd will now bail on unknown error codes.
182 enhancement: settings.maxProcesses can now be set as a global limit
183 of childprocesses
184 enhancement: Lsyncd will refuse to start when any startup rsync
185 does not work cleanly and returns "again" unless settings.insist or
186 --insist is specified, then Lsyncd will keep retrying until it works.
187 enhancement: option "rsyncBinary" determines which rsync Lsyncd calls.
188 Default is "/usr/bin/rsync"
189 enhancement: fsevents ("inotify for OSX") fixed for Snowleopard.
190 and is available to configure by default.
191 enhancement: settings.inotifyMode: the actualy Modification event
192 Lsyncd reacts to can now be configured. Default is to react on
193 file closing in write mode.
194 enhancement: readdir(path) is available to userscripts, reads the contents
195 of a directory.
196
197 2011-03-27: 2.0.4
198 enhancement: new setting options logident, logfacility
199 fix: moving filenames with spaces through ssh
200 fix: excludes containing chars % $ ( ) . [ ] + -
201 fix: various typos
202 change: api, settings.statusInterval instead of settings.statusIntervall
203
204 2011-02-25: 2.0.3
205 enhancement: new default target --direct using /bin/ binaries
206 to keep to local dirs in sync (and by default
207 not preserving ownership)
208 example: added a new example how to remotely execute a command
209 after each rsync operations
210 fix: possible crash with long rsyncOps table exceeding lua stack.
211 fix: excludes now properly match relative and absolute paths
212 fix: call to nil function when manually adding blanket delays
213 fix: on ReiserFS not delivering proper dir stats and when encountering
214 a symlink, aquire the node stat for the symlink instead from
215 the linked node.
216 change: leave lua apichecking enabled by default.
217
218
219 2011-01-20: 2.0.2
220 fix: exclude rules not terminated with '/' now match a file
221 or dir named exactly the same not starting with.
222 fix: pass exclude rules to the startup sync
223 fix: when matching exclusion to not add inotify use same
224 partial path than on syncs
225 fix: properly close pipes that needed more than one write.
226
227 2011-01-11: 2.0.1
228 fix: write pidfile after daemonize()
229 fix: fixed weak tables that allowed garbage collector to collect
230 event lists too eraly.
231 improvement: allow multiple arguments as table for rsyncOps
232 change: added OSX fsevents interface, disabled in autoconf by default
233 since still very experimental and limited to OSX 10.5 only.
234
235 2010-12-02: 2.0.0
236 a complete recoding!
237
238 change: format of command line arguments changed completly.
239 improvement: the config files format is not LUA instead of XML
240 allowing a range from easy configuration up until
241 complete scripts
242 enhancement: difference actions on different kind of events
243 effents are combined logically.
244 enhancement: allow moves to moved on the target (rsyncssh)
245 enhancement: excludes now allow simple file patterns (?, * and **)
246 enhancement: optionally there is now a statusfile
247 improvement: multiple target queues do not interfer with each other
248 improvement: Lsyncd2 will no longer wait for child processes to return
249 the monitor queue is constantly empties as long Lsyncd runs
250 improvement: Lsyncd2 can now retry operations on network failure and
251 queue events up.
252 improvement: There are now several debugging categories that can be
253 turned on individually.
254 change: manpage is now written in asciidoc
255 change: most more complex logic of Lsyncd is now written in Lua.
256
257 2010-10-04: 1.39
258 enhancement: call action for multiple targets simultanously
259 fix: correctly accept <file-filter/> from config xml
260 fix: correctly close and free the inotify file descriptor in case of restart
261 due to HUP signal or OVERFLOW condition
262 fix: when delay=0 a bug always called rsync file filter even when in
263 directory mode
264
265 2010-09-01: 1.38
266 enhancement: implemented file filters for singular operations
267 enhancement: added --singular parameter for single file calls
268 fix: fixed --dryrun messages
269 improvement: now restarts on an inotify OVERFLOW message, just like if
270 being kill -HUPed
271 internal: printout the actual binary called when --debug specified
272
273 2010-08-05: 1.37
274 enhancement: react on HUP signals (interpreted as complete restart)
275 enhancement: inotifies are configureable
276 enhancement: --no-startup skips the startup calls
277 fix : fixed delayed blocking handling.
278 improvement: made logging output better readable
279 internal: made all global variables local
280 internal: renamed "tackles" to "delays"
281 internal: removed the need of the "tosync" stack
282 internal: use more pointers instead of indexes
283
284 2010-07-11: 1.34
285 fix: logging segfault on 64bit systems
286 changed: man page location, spellings
287
288 2010-06-05: 1.33
289 fix: exlude file argument passing to rsync
290 fix: allow exlude files specified for individual sources
291 fix/enhancement: exlusions will be compared with extended
292 path files allowing sub dirs to be excluded.
293 enhancement: allow delays and call aggregation
294
295 2009-01-05: Release of lsyncd 1.26
296 fix: segfault on multitargets
297 changed meaning of "version" tag in lsyncd.conf.xml
298
299 2008-12-14: Release of lsyncd 1.25
300 fix: mv dir and cp -r working
301 fix: working with reiserfs
302 enhancement: config files
303 enhancement: multiple targets
304 enhancement: pidfiles
305 optimized: memory usage
306 improved documentation
307 lots of smaller stuff here and there ...
308 Thanks to all contributers!
309
310 2007-12-05: Release of lsyncd 1.0
311