Debian Codegraph @

prog/pwm/vt1211_pwm

raw
1 #!/bin/bash
2 #
3 # vt1211_pwm - Manually control the PWM outputs of the VIA vt1211 Super-I/O
4 #
5 # Copyright (C) 2008 Juerg Haefliger (juergh at gmail.com>
6 #
7 # This program is free software; you can redistribute it and/or modify
8 # it under the terms of the GNU General Public License as published by
9 # the Free Software Foundation; either version 2 of the License, or
10 # (at your option) any later version.
11 #
12 # This program is distributed in the hope that it will be useful,
13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 # GNU General Public License for more details.
16 #
17 # You should have received a copy of the GNU General Public License
18 # along with this program; if not, write to the Free Software
19 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 #
21
22 function usage
23 {
24 echo "Usage: vt1211_pwm -i <pwm> | -r <pwm> | -s <pwm>,<val>"
25 echo
26 echo "DESCRIPTION"
27 echo " This tool provides manual control of the PWM outputs of the VIA "
28 echo " vt1211 Super-I/O."
29 echo
30 echo "OPTIONS"
31 echo " -d Display the current PWM settings of the vt1211."
32 echo " -i <pwm> Initialize the PWM output for manual control."
33 echo " -r <pwm> Restore the PWM output to the original settings."
34 echo " -s <pwm>,<val> Set the PWM output duty-cycle. "
35 echo
36 echo "WITH"
37 echo " <pwm> PWM output (1-2)."
38 echo " <val> PWM duty-cycle (0-255)."
39 echo
40 exit 2
41 }
42
43 function set_attr
44 {
45 local tmp
46 read tmp < $1
47 echo "echo $tmp > $1"
48 echo $2 > $1
49 }
50
51 # check if we have the right permissions to run
52 if [ $(whoami) != "root" ] ; then
53 echo "You must be root to run this script."
54 exit 1
55 fi
56
57 # parse the command line options
58 action=
59 nr=1
60 val=0
61 while getopts di:r:s: opt ; do
62 [ -z "$action" ] || usage
63 case $opt in
64 d) action="display"
65 ;;
66 i) action="init"
67 nr=$OPTARG
68 ;;
69 r) action="restore"
70 nr=$OPTARG
71 ;;
72 s) action="set"
73 nr=${OPTARG%,*}
74 val=${OPTARG#*,}
75 ;;
76 ?) usage
77 ;;
78 esac
79 done
80
81 [ -z "$action" ] && usage
82 [ $nr -lt 1 -o $nr -gt 2 ] && usage
83 [ $val -lt 0 -o $val -gt 255 ] && usage
84
85 # check hwmon device
86 dev=$(ls -d /sys/devices/platform/vt1211.*)
87 if [ -z "$dev" ] ; then
88 echo "Platform device vt1211 not found. Did you load the vt1211 module?"
89 exit 1
90 fi
91
92 # init file
93 initfile="/root/.vt1211_pwm${nr}"
94
95 # ACTION: display
96 if [ $action = "display" ] ; then
97 for nr in 1 2 ; do
98 read mode < ${dev}/pwm${nr}_enable
99 if [ $mode -eq 0 ] ; then
100 mode_txt="(disabled)"
101 elif [ $mode -eq 2 ] ; then
102 mode_txt="(auto) "
103 else
104 mode_txt="(unknown) "
105 fi
106 read val < ${dev}/pwm${nr}
107 dc=$((val * 100 / 255))
108 echo "pwm${nr}: mode = ${mode} ${mode_txt}, val = ${val} (${dc}%)"
109 done
110 fi
111
112 # ACTION: init
113 if [ $action = "init" ] ; then
114 # check for an init file
115 if [ -e $initfile ] ; then
116 echo " $initfile exists. Did you already initialize this PWM?"
117 exit 1
118 fi
119
120 (
121 # set the pwm-to-temp mapping
122 # use the internal temp as a reference
123 set_attr ${dev}/pwm${nr}_auto_channels_temp 2
124
125 # enable the pwm auto controller
126 set_attr ${dev}/pwm${nr}_enable 2
127
128 # set the PWM duty-cycle
129 set_attr ${dev}/pwm${nr}_auto_point2_pwm 0
130 set_attr ${dev}/pwm${nr}_auto_point3_pwm 255
131
132 # set the temp boundaries to extrem values
133 set_attr ${dev}/pwm1_auto_point1_temp 0
134 set_attr ${dev}/pwm1_auto_point2_temp 0
135 set_attr ${dev}/pwm1_auto_point3_temp 1000000
136 set_attr ${dev}/pwm1_auto_point4_temp 1000000
137
138 ) > $initfile
139
140 exit 0
141 fi
142
143 # ACTION: restore
144 if [ $action = "restore" ] ; then
145 # check for an init file
146 if [ ! -e $initfile ] ; then
147 echo " $initfile not found. Nothing to restore."
148 exit 1
149 fi
150
151 sh $initfile
152 rm $initfile
153
154 exit 0
155 fi
156
157 # ACTION: set
158 if [ $action = "set" ] ; then
159 # check for an init file
160 if [ ! -e $initfile ] ; then
161 echo "$initfile not found. Did you initialize this PWM?"
162 exit 1
163 fi
164
165 # set the PWM duty-cycle
166 echo $val > ${dev}/pwm${nr}_auto_point3_pwm
167
168 # fool the vt1211 into believing there is a temp change
169 # otherwise the new PWM duty-cycle doesn't take effect
170 echo 0 > ${dev}/pwm1_auto_point3_temp
171 echo 1000000 > ${dev}/pwm1_auto_point3_temp
172
173 # read the new PWM duty-cycle back and print it
174 read val < ${dev}/pwm${nr}
175 dc=$((val * 100 / 255))
176 echo "pwm${nr} is now at ${val} (${dc}%)."
177
178 exit 0
179 fi