| 1 |
#!/bin/bash |
| 2 |
# |
| 3 |
# healthd -- This is a simple daemon which can be used to alert you in the |
| 4 |
# event of a hardware health monitoring alarm by sending an |
| 5 |
# email to the value of ADMIN_EMAIL (defined below). |
| 6 |
# |
| 7 |
# To Use -- Simply start the daemon from a shell (may be backgrounded) |
| 8 |
# |
| 9 |
# Other details -- Checks status every 15 seconds. Sends warning emails every |
| 10 |
# ten minutes during alarm until the alarm is cleared. |
| 11 |
# It won't start up if there is a pending alarm on startup. |
| 12 |
# Very low loading on the machine (sleeps almost all the time). |
| 13 |
# This is just an example. It works, but hopefully we can |
| 14 |
# get something better written. :') |
| 15 |
# |
| 16 |
# Requirements -- mail, sensors, bash, sleep |
| 17 |
# |
| 18 |
# Written & Copyrighten by Philip Edelbrock, 1999. |
| 19 |
# |
| 20 |
# Version: 1.1 |
| 21 |
# |
| 22 |
|
| 23 |
ADMIN_EMAIL="root@localhost" |
| 24 |
|
| 25 |
# Try loading the built-in sleep implementation to avoid spawning a |
| 26 |
# new process every 15 seconds |
| 27 |
enable -f sleep.so sleep >/dev/null 2>&1 |
| 28 |
|
| 29 |
sensors_state=$(sensors) |
| 30 |
if [[ "$sensors_state" =~ 'ALARM' ]] |
| 31 |
then |
| 32 |
echo "Pending Alarms on start up! Exiting!" |
| 33 |
exit |
| 34 |
fi |
| 35 |
|
| 36 |
while true |
| 37 |
do |
| 38 |
sleep 15 |
| 39 |
sensors_state=$(sensors) |
| 40 |
if [[ "$sensors_state" =~ 'ALARM' ]] |
| 41 |
then |
| 42 |
echo "$sensors_state" | mail -s '**** Hardware Health Warning ****' $ADMIN_EMAIL |
| 43 |
sleep 600 |
| 44 |
fi |
| 45 |
done |