| 1 |
|
| 2 |
What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY |
| 3 |
KernelVersion: 2.6.37 |
| 4 |
Contact: [email protected] |
| 5 |
Description: |
| 6 |
Stores frequency into tuning word Y. |
| 7 |
There will be more than one out_altvoltageX_frequencyY file, |
| 8 |
which allows for pin controlled FSK Frequency Shift Keying |
| 9 |
(out_altvoltageX_pincontrol_frequency_en is active) or the user |
| 10 |
can control the desired active tuning word by writing Y to the |
| 11 |
out_altvoltageX_frequencysymbol file. |
| 12 |
|
| 13 |
What: /sys/bus/iio/devices/.../out_altvoltageX_frequencyY_scale |
| 14 |
KernelVersion: 2.6.37 |
| 15 |
Contact: [email protected] |
| 16 |
Description: |
| 17 |
Scale to be applied to out_altvoltageX_frequencyY in order to |
| 18 |
obtain the desired value in Hz. If shared across all frequency |
| 19 |
registers Y is not present. It is also possible X is not present |
| 20 |
if shared across all channels. |
| 21 |
|
| 22 |
What: /sys/bus/iio/devices/.../out_altvoltageX_frequencysymbol |
| 23 |
KernelVersion: 2.6.37 |
| 24 |
Contact: [email protected] |
| 25 |
Description: |
| 26 |
Specifies the active output frequency tuning word. The value |
| 27 |
corresponds to the Y in out_altvoltageX_frequencyY. |
| 28 |
To exit this mode the user can write |
| 29 |
out_altvoltageX_pincontrol_frequency_en or |
| 30 |
out_altvoltageX_out_enable file. |
| 31 |
|
| 32 |
What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY |
| 33 |
KernelVersion: 2.6.37 |
| 34 |
Contact: [email protected] |
| 35 |
Description: |
| 36 |
Stores phase into Y. |
| 37 |
There will be more than one out_altvoltageX_phaseY file, which |
| 38 |
allows for pin controlled PSK Phase Shift Keying |
| 39 |
(out_altvoltageX_pincontrol_phase_en is active) or the user can |
| 40 |
control the desired phase Y which is added to the phase |
| 41 |
accumulator output by writing Y to the phase_en file. |
| 42 |
|
| 43 |
What: /sys/bus/iio/devices/.../out_altvoltageX_phaseY_scale |
| 44 |
KernelVersion: 2.6.37 |
| 45 |
Contact: [email protected] |
| 46 |
Description: |
| 47 |
Scale to be applied to out_altvoltageX_phaseY in order to obtain |
| 48 |
the desired value in rad. If shared across all phase registers |
| 49 |
Y is not present. It is also possible X is not present if |
| 50 |
shared across all channels. |
| 51 |
|
| 52 |
What: /sys/bus/iio/devices/.../out_altvoltageX_phasesymbol |
| 53 |
KernelVersion: 2.6.37 |
| 54 |
Contact: [email protected] |
| 55 |
Description: |
| 56 |
Specifies the active phase Y which is added to the phase |
| 57 |
accumulator output. The value corresponds to the Y in |
| 58 |
out_altvoltageX_phaseY. To exit this mode the user can write |
| 59 |
out_altvoltageX_pincontrol_phase_en or disable file. |
| 60 |
|
| 61 |
What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_en |
| 62 |
What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_frequency_en |
| 63 |
What: /sys/bus/iio/devices/.../out_altvoltageX_pincontrol_phase_en |
| 64 |
KernelVersion: 2.6.37 |
| 65 |
Contact: [email protected] |
| 66 |
Description: |
| 67 |
out_altvoltageX_pincontrol_en: Both, the active frequency and |
| 68 |
phase is controlled by the respective phase and frequency |
| 69 |
control inputs. In case the device in features independent |
| 70 |
controls, then there are dedicated files |
| 71 |
(out_altvoltageX_pincontrol_frequency_en, |
| 72 |
out_altvoltageX_pincontrol_phase_en). |
| 73 |
|
| 74 |
What: /sys/bus/iio/devices/.../out_altvoltageX_out_enable |
| 75 |
What: /sys/bus/iio/devices/.../out_altvoltageX_outY_enable |
| 76 |
KernelVersion: 2.6.37 |
| 77 |
Contact: [email protected] |
| 78 |
Description: |
| 79 |
out_altvoltageX_outY_enable controls signal generation on |
| 80 |
output Y of channel X. Y may be suppressed if all channels are |
| 81 |
controlled together. |
| 82 |
|
| 83 |
What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype |
| 84 |
KernelVersion: 2.6.37 |
| 85 |
Contact: [email protected] |
| 86 |
Description: |
| 87 |
Specifies the output waveform. |
| 88 |
(sine, triangle, ramp, square, ...) |
| 89 |
For a list of available output waveform options read |
| 90 |
available_output_modes. |
| 91 |
|
| 92 |
What: /sys/bus/iio/devices/.../out_altvoltageX_outY_wavetype_available |
| 93 |
KernelVersion: 2.6.37 |
| 94 |
Contact: [email protected] |
| 95 |
Description: |
| 96 |
Lists all available output waveform options. |