| 1 |
# SPDX-License-Identifier: GPL-2.0-only |
| 2 |
config B43LEGACY |
| 3 |
tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)" |
| 4 |
depends on SSB_POSSIBLE && MAC80211 && HAS_DMA |
| 5 |
select SSB |
| 6 |
select FW_LOADER |
| 7 |
help |
| 8 |
b43legacy is a driver for 802.11b devices from Broadcom (BCM4301 and |
| 9 |
BCM4303) and early model 802.11g chips (BCM4306 Ver. 2) used in the |
| 10 |
Linksys WPC54G V1 PCMCIA devices. |
| 11 |
|
| 12 |
Newer 802.11g and 802.11a devices need b43. |
| 13 |
|
| 14 |
It is safe to include both b43 and b43legacy as the underlying glue |
| 15 |
layer will automatically load the correct version for your device. |
| 16 |
|
| 17 |
This driver uses V3 firmware, which must be installed separately using |
| 18 |
b43-fwcutter. |
| 19 |
|
| 20 |
This driver can be built as a module (recommended) that will be |
| 21 |
called "b43legacy". If unsure, say M. |
| 22 |
|
| 23 |
# Auto-select SSB PCI-HOST support, if possible |
| 24 |
config B43LEGACY_PCI_AUTOSELECT |
| 25 |
bool |
| 26 |
depends on B43LEGACY && SSB_PCIHOST_POSSIBLE |
| 27 |
select SSB_PCIHOST |
| 28 |
select SSB_B43_PCI_BRIDGE |
| 29 |
default y |
| 30 |
|
| 31 |
# Auto-select SSB PCICORE driver, if possible |
| 32 |
config B43LEGACY_PCICORE_AUTOSELECT |
| 33 |
bool |
| 34 |
depends on B43LEGACY && SSB_DRIVER_PCICORE_POSSIBLE |
| 35 |
select SSB_DRIVER_PCICORE |
| 36 |
default y |
| 37 |
|
| 38 |
# LED support |
| 39 |
# This config option automatically enables b43legacy LEDS support, |
| 40 |
# if it's possible. |
| 41 |
config B43LEGACY_LEDS |
| 42 |
bool |
| 43 |
depends on B43LEGACY && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = B43LEGACY) |
| 44 |
default y |
| 45 |
|
| 46 |
# This config option automatically enables b43 HW-RNG support, |
| 47 |
# if the HW-RNG core is enabled. |
| 48 |
config B43LEGACY_HWRNG |
| 49 |
bool |
| 50 |
depends on B43LEGACY && (HW_RANDOM = y || HW_RANDOM = B43LEGACY) |
| 51 |
default y |
| 52 |
|
| 53 |
config B43LEGACY_DEBUG |
| 54 |
bool "Broadcom 43xx-legacy debugging" |
| 55 |
depends on B43LEGACY |
| 56 |
default y |
| 57 |
help |
| 58 |
Say Y, because this information will help you get the driver running. |
| 59 |
This option generates a minimum of log output. |
| 60 |
|
| 61 |
config B43LEGACY_DMA |
| 62 |
bool |
| 63 |
depends on B43LEGACY |
| 64 |
|
| 65 |
config B43LEGACY_PIO |
| 66 |
bool |
| 67 |
depends on B43LEGACY |
| 68 |
|
| 69 |
choice |
| 70 |
prompt "Broadcom 43xx-legacy data transfer mode" |
| 71 |
depends on B43LEGACY |
| 72 |
default B43LEGACY_DMA_AND_PIO_MODE |
| 73 |
|
| 74 |
config B43LEGACY_DMA_AND_PIO_MODE |
| 75 |
bool "DMA + PIO" |
| 76 |
select B43LEGACY_DMA |
| 77 |
select B43LEGACY_PIO |
| 78 |
help |
| 79 |
Include both, Direct Memory Access (DMA) and Programmed I/O (PIO) |
| 80 |
data transfer modes. The mode actually used is selectable through |
| 81 |
the module parameter "pio". With pio=0 as a module parameter, the |
| 82 |
default DMA is used, otherwise PIO is used. |
| 83 |
|
| 84 |
If unsure, choose this option. |
| 85 |
|
| 86 |
config B43LEGACY_DMA_MODE |
| 87 |
bool "DMA (Direct Memory Access) only" |
| 88 |
select B43LEGACY_DMA |
| 89 |
help |
| 90 |
Only include Direct Memory Access (DMA). |
| 91 |
This reduces the size of the driver module, by omitting the PIO code. |
| 92 |
|
| 93 |
config B43LEGACY_PIO_MODE |
| 94 |
bool "PIO (Programmed I/O) only" |
| 95 |
select B43LEGACY_PIO |
| 96 |
help |
| 97 |
Only include Programmed I/O (PIO). |
| 98 |
This reduces the size of the driver module, by omitting the DMA code. |
| 99 |
Please note that PIO transfers are slow (compared to DMA). |
| 100 |
|
| 101 |
Also note that not all devices of the b43legacy series support PIO. |
| 102 |
|
| 103 |
You should use PIO only if DMA does not work for you. |
| 104 |
|
| 105 |
endchoice |