| 1 |
# SPDX-License-Identifier: ISC |
| 2 |
config ATH9K_HW |
| 3 |
tristate |
| 4 |
config ATH9K_COMMON |
| 5 |
tristate |
| 6 |
select ATH_COMMON |
| 7 |
config ATH9K_COMMON_DEBUG |
| 8 |
bool |
| 9 |
config ATH9K_DFS_DEBUGFS |
| 10 |
def_bool y |
| 11 |
depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED |
| 12 |
|
| 13 |
config ATH9K_BTCOEX_SUPPORT |
| 14 |
bool "Atheros bluetooth coexistence support" |
| 15 |
depends on (ATH9K || ATH9K_HTC) |
| 16 |
default y |
| 17 |
help |
| 18 |
Say Y, if you want to use the ath9k/ath9k_htc radios together with |
| 19 |
Bluetooth modules in the same system. |
| 20 |
|
| 21 |
config ATH9K |
| 22 |
tristate "Atheros 802.11n wireless cards support" |
| 23 |
depends on MAC80211 && HAS_DMA |
| 24 |
select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211 |
| 25 |
select ATH9K_HW |
| 26 |
select ATH9K_COMMON |
| 27 |
help |
| 28 |
This module adds support for wireless adapters based on |
| 29 |
Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family |
| 30 |
of chipsets. For a specific list of supported external |
| 31 |
cards, laptops that already ship with these cards and |
| 32 |
APs that come with these cards refer to ath9k wiki |
| 33 |
products page: |
| 34 |
|
| 35 |
https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/products |
| 36 |
|
| 37 |
If you choose to build a module, it'll be called ath9k. |
| 38 |
|
| 39 |
config ATH9K_PCI |
| 40 |
bool "Atheros ath9k PCI/PCIe bus support" |
| 41 |
default y |
| 42 |
depends on ATH9K && PCI |
| 43 |
help |
| 44 |
This option enables the PCI bus support in ath9k. |
| 45 |
|
| 46 |
Say Y, if you have a compatible PCI/PCIe wireless card. |
| 47 |
|
| 48 |
config ATH9K_AHB |
| 49 |
bool "Atheros ath9k AHB bus support" |
| 50 |
depends on ATH9K && OF |
| 51 |
default n |
| 52 |
help |
| 53 |
This option enables the AHB bus support in ath9k. |
| 54 |
|
| 55 |
Say Y, if you have a SoC with a compatible built-in |
| 56 |
wireless MAC. Say N if unsure. |
| 57 |
|
| 58 |
config ATH9K_DEBUGFS |
| 59 |
bool "Atheros ath9k debugging" |
| 60 |
depends on ATH9K && DEBUG_FS && MAC80211_DEBUGFS |
| 61 |
select ATH9K_COMMON_DEBUG |
| 62 |
help |
| 63 |
Say Y, if you need access to ath9k's statistics for |
| 64 |
interrupts, rate control, etc. |
| 65 |
|
| 66 |
Also required for changing debug message flags at run time and for |
| 67 |
TX99. |
| 68 |
|
| 69 |
config ATH9K_STATION_STATISTICS |
| 70 |
bool "Detailed station statistics" |
| 71 |
depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS |
| 72 |
default n |
| 73 |
help |
| 74 |
This option enables detailed statistics for association stations. |
| 75 |
|
| 76 |
config ATH9K_TX99 |
| 77 |
bool "Atheros ath9k TX99 testing support" |
| 78 |
depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS |
| 79 |
default n |
| 80 |
help |
| 81 |
Say N. This should only be enabled on systems undergoing |
| 82 |
certification testing and evaluation in a controlled environment. |
| 83 |
Enabling this will only enable TX99 support, all other modes of |
| 84 |
operation will be disabled. |
| 85 |
|
| 86 |
TX99 support enables Specific Absorption Rate (SAR) testing. |
| 87 |
SAR is the unit of measurement for the amount of radio frequency(RF) |
| 88 |
absorbed by the body when using a wireless device. The RF exposure |
| 89 |
limits used are expressed in the terms of SAR, which is a measure |
| 90 |
of the electric and magnetic field strength and power density for |
| 91 |
transmitters operating at frequencies from 300 kHz to 100 GHz. |
| 92 |
Regulatory bodies around the world require that wireless device |
| 93 |
be evaluated to meet the RF exposure limits set forth in the |
| 94 |
governmental SAR regulations. |
| 95 |
|
| 96 |
config ATH9K_DFS_CERTIFIED |
| 97 |
bool "Atheros DFS support for certified platforms" |
| 98 |
depends on ATH9K && CFG80211_CERTIFICATION_ONUS |
| 99 |
default n |
| 100 |
help |
| 101 |
This option enables DFS support for initiating radiation on |
| 102 |
ath9k. There is no way to dynamically detect if a card was DFS |
| 103 |
certified and as such this is left as a build time option. This |
| 104 |
option should only be enabled by system integrators that can |
| 105 |
guarantee that all the platforms that their kernel will run on |
| 106 |
have obtained appropriate regulatory body certification for a |
| 107 |
respective Atheros card by using ath9k on the target shipping |
| 108 |
platforms. |
| 109 |
|
| 110 |
This is currently only a placeholder for future DFS support, |
| 111 |
as DFS support requires more components that still need to be |
| 112 |
developed. At this point enabling this option won't do anything |
| 113 |
except increase code size. |
| 114 |
|
| 115 |
config ATH9K_DYNACK |
| 116 |
bool "Atheros ath9k ACK timeout estimation algorithm" |
| 117 |
depends on ATH9K |
| 118 |
default n |
| 119 |
help |
| 120 |
This option enables ath9k dynamic ACK timeout estimation algorithm |
| 121 |
based on ACK frame RX timestamp, TX frame timestamp and frame |
| 122 |
duration |
| 123 |
|
| 124 |
config ATH9K_WOW |
| 125 |
bool "Wake on Wireless LAN support (EXPERIMENTAL)" |
| 126 |
depends on ATH9K && PM |
| 127 |
default n |
| 128 |
help |
| 129 |
This option enables Wake on Wireless LAN support for certain cards. |
| 130 |
Currently, AR9462 is supported. |
| 131 |
|
| 132 |
config ATH9K_RFKILL |
| 133 |
bool "Atheros ath9k rfkill support" if EXPERT |
| 134 |
depends on ATH9K |
| 135 |
depends on RFKILL=y || RFKILL=ATH9K |
| 136 |
default y |
| 137 |
help |
| 138 |
Say Y to have ath9k poll the RF-Kill GPIO every couple of |
| 139 |
seconds. Turn off to save power, but enable it if you have |
| 140 |
a platform that can toggle the RF-Kill GPIO. |
| 141 |
|
| 142 |
config ATH9K_CHANNEL_CONTEXT |
| 143 |
bool "Channel Context support" |
| 144 |
depends on ATH9K |
| 145 |
default n |
| 146 |
help |
| 147 |
This option enables channel context support in ath9k, which is needed |
| 148 |
for multi-channel concurrency. Enable this if P2P PowerSave support |
| 149 |
is required. |
| 150 |
|
| 151 |
config ATH9K_PCOEM |
| 152 |
bool "Atheros ath9k support for PC OEM cards" if EXPERT |
| 153 |
depends on ATH9K |
| 154 |
default y |
| 155 |
|
| 156 |
config ATH9K_PCI_NO_EEPROM |
| 157 |
tristate "Atheros ath9k pci loader for EEPROM-less chips" |
| 158 |
depends on ATH9K_PCI |
| 159 |
default n |
| 160 |
help |
| 161 |
This separate driver provides a loader in order to support the |
| 162 |
AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have |
| 163 |
their initialization data (which contains the real PCI Device ID |
| 164 |
that ath9k will need) stored together with the calibration data out |
| 165 |
of reach for the ath9k chip. |
| 166 |
|
| 167 |
These devices are usually various network appliances, routers or |
| 168 |
access Points and such. |
| 169 |
|
| 170 |
If unsure say N. |
| 171 |
|
| 172 |
config ATH9K_HTC |
| 173 |
tristate "Atheros HTC based wireless cards support" |
| 174 |
depends on USB && MAC80211 |
| 175 |
select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211 |
| 176 |
select ATH9K_HW |
| 177 |
select ATH9K_COMMON |
| 178 |
help |
| 179 |
Support for Atheros HTC based cards. |
| 180 |
Chipsets supported: AR9271 |
| 181 |
|
| 182 |
For more information: |
| 183 |
https://wireless.wiki.kernel.org/en/users/Drivers/ath9k_htc |
| 184 |
|
| 185 |
The built module will be ath9k_htc. |
| 186 |
|
| 187 |
config ATH9K_HTC_DEBUGFS |
| 188 |
bool "Atheros ath9k_htc debugging" |
| 189 |
depends on ATH9K_HTC && DEBUG_FS |
| 190 |
select ATH9K_COMMON_DEBUG |
| 191 |
help |
| 192 |
Say Y, if you need access to ath9k_htc's statistics. |
| 193 |
As well as access to the FFT/spectral data. |
| 194 |
|
| 195 |
config ATH9K_HWRNG |
| 196 |
bool "Random number generator support" |
| 197 |
depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K) |
| 198 |
default n |
| 199 |
help |
| 200 |
This option incorporates the ADC register output as a source of |
| 201 |
randomness into Linux entropy pool (/dev/urandom and /dev/random) |
| 202 |
|
| 203 |
Say Y, feeds the entropy directly from the WiFi driver to the input |
| 204 |
pool. |
| 205 |
|
| 206 |
config ATH9K_COMMON_SPECTRAL |
| 207 |
bool "Atheros ath9k/ath9k_htc spectral scan support" |
| 208 |
depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS |
| 209 |
select RELAY |
| 210 |
default n |
| 211 |
help |
| 212 |
Say Y to enable access to the FFT/spectral data via debugfs. |