| 1 |
* I2C |
| 2 |
|
| 3 |
The I2C controller is expressed as a bus under the CPM node. |
| 4 |
|
| 5 |
Properties: |
| 6 |
- compatible : "fsl,cpm1-i2c", "fsl,cpm2-i2c" |
| 7 |
- reg : On CPM2 devices, the second resource doesn't specify the I2C |
| 8 |
Parameter RAM itself, but the I2C_BASE field of the CPM2 Parameter RAM |
| 9 |
(typically 0x8afc 0x2). |
| 10 |
- #address-cells : Should be one. The cell is the i2c device address with |
| 11 |
the r/w bit set to zero. |
| 12 |
- #size-cells : Should be zero. |
| 13 |
- clock-frequency : Can be used to set the i2c clock frequency. If |
| 14 |
unspecified, a default frequency of 60kHz is being used. |
| 15 |
The following two properties are deprecated. They are only used by legacy |
| 16 |
i2c drivers to find the bus to probe: |
| 17 |
- linux,i2c-index : Can be used to hard code an i2c bus number. By default, |
| 18 |
the bus number is dynamically assigned by the i2c core. |
| 19 |
- linux,i2c-class : Can be used to override the i2c class. The class is used |
| 20 |
by legacy i2c device drivers to find a bus in a specific context like |
| 21 |
system management, video or sound. By default, I2C_CLASS_HWMON (1) is |
| 22 |
being used. The definition of the classes can be found in |
| 23 |
include/i2c/i2c.h |
| 24 |
|
| 25 |
Example, based on mpc823: |
| 26 |
|
| 27 |
i2c@860 { |
| 28 |
compatible = "fsl,mpc823-i2c", |
| 29 |
"fsl,cpm1-i2c"; |
| 30 |
reg = <0x860 0x20 0x3c80 0x30>; |
| 31 |
interrupts = <16>; |
| 32 |
interrupt-parent = <&CPM_PIC>; |
| 33 |
fsl,cpm-command = <0x10>; |
| 34 |
#address-cells = <1>; |
| 35 |
#size-cells = <0>; |
| 36 |
|
| 37 |
rtc@68 { |
| 38 |
compatible = "dallas,ds1307"; |
| 39 |
reg = <0x68>; |
| 40 |
}; |
| 41 |
}; |