| 1 |
// SPDX-License-Identifier: GPL-2.0-only |
| 2 |
/* |
| 3 |
* HD-audio stream operations |
| 4 |
*/ |
| 5 |
|
| 6 |
#include <linux/kernel.h> |
| 7 |
#include <linux/delay.h> |
| 8 |
#include <linux/export.h> |
| 9 |
#include <linux/clocksource.h> |
| 10 |
#include <sound/compress_driver.h> |
| 11 |
#include <sound/core.h> |
| 12 |
#include <sound/pcm.h> |
| 13 |
#include <sound/hdaudio.h> |
| 14 |
#include <sound/hda_register.h> |
| 15 |
#include "trace.h" |
| 16 |
|
| 17 |
/* |
| 18 |
* the hdac_stream library is intended to be used with the following |
| 19 |
* transitions. The states are not formally defined in the code but loosely |
| 20 |
* inspired by boolean variables. Note that the 'prepared' field is not used |
| 21 |
* in this library but by the callers during the hw_params/prepare transitions |
| 22 |
* |
| 23 |
* | |
| 24 |
* stream_init() | |
| 25 |
* v |
| 26 |
* +--+-------+ |
| 27 |
* | unused | |
| 28 |
* +--+----+--+ |
| 29 |
* | ^ |
| 30 |
* stream_assign() | | stream_release() |
| 31 |
* v | |
| 32 |
* +--+----+--+ |
| 33 |
* | opened | |
| 34 |
* +--+----+--+ |
| 35 |
* | ^ |
| 36 |
* stream_reset() | | |
| 37 |
* stream_setup() | | stream_cleanup() |
| 38 |
* v | |
| 39 |
* +--+----+--+ |
| 40 |
* | prepared | |
| 41 |
* +--+----+--+ |
| 42 |
* | ^ |
| 43 |
* stream_start() | | stream_stop() |
| 44 |
* v | |
| 45 |
* +--+----+--+ |
| 46 |
* | running | |
| 47 |
* +----------+ |
| 48 |
*/ |
| 49 |
|
| 50 |
/** |
| 51 |
* snd_hdac_get_stream_stripe_ctl - get stripe control value |
| 52 |
* @bus: HD-audio core bus |
| 53 |
* @substream: PCM substream |
| 54 |
*/ |
| 55 |
int snd_hdac_get_stream_stripe_ctl(struct hdac_bus *bus, |
| 56 |
struct snd_pcm_substream *substream) |
| 57 |
{ |
| 58 |
struct snd_pcm_runtime *runtime = substream->runtime; |
| 59 |
unsigned int channels = runtime->channels, |
| 60 |
rate = runtime->rate, |
| 61 |
bits_per_sample = runtime->sample_bits, |
| 62 |
max_sdo_lines, value, sdo_line; |
| 63 |
|
| 64 |
/* T_AZA_GCAP_NSDO is 1:2 bitfields in GCAP */ |
| 65 |
max_sdo_lines = snd_hdac_chip_readl(bus, GCAP) & AZX_GCAP_NSDO; |
| 66 |
|
| 67 |
/* following is from HD audio spec */ |
| 68 |
for (sdo_line = max_sdo_lines; sdo_line > 0; sdo_line >>= 1) { |
| 69 |
if (rate > 48000) |
| 70 |
value = (channels * bits_per_sample * |
| 71 |
(rate / 48000)) / sdo_line; |
| 72 |
else |
| 73 |
value = (channels * bits_per_sample) / sdo_line; |
| 74 |
|
| 75 |
if (value >= bus->sdo_limit) |
| 76 |
break; |
| 77 |
} |
| 78 |
|
| 79 |
/* stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines */ |
| 80 |
return sdo_line >> 1; |
| 81 |
} |
| 82 |
EXPORT_SYMBOL_GPL(snd_hdac_get_stream_stripe_ctl); |
| 83 |
|
| 84 |
/** |
| 85 |
* snd_hdac_stream_init - initialize each stream (aka device) |
| 86 |
* @bus: HD-audio core bus |
| 87 |
* @azx_dev: HD-audio core stream object to initialize |
| 88 |
* @idx: stream index number |
| 89 |
* @direction: stream direction (SNDRV_PCM_STREAM_PLAYBACK or SNDRV_PCM_STREAM_CAPTURE) |
| 90 |
* @tag: the tag id to assign |
| 91 |
* |
| 92 |
* Assign the starting bdl address to each stream (device) and initialize. |
| 93 |
*/ |
| 94 |
void snd_hdac_stream_init(struct hdac_bus *bus, struct hdac_stream *azx_dev, |
| 95 |
int idx, int direction, int tag) |
| 96 |
{ |
| 97 |
azx_dev->bus = bus; |
| 98 |
/* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ |
| 99 |
azx_dev->sd_addr = bus->remap_addr + (0x20 * idx + 0x80); |
| 100 |
/* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */ |
| 101 |
azx_dev->sd_int_sta_mask = 1 << idx; |
| 102 |
azx_dev->index = idx; |
| 103 |
azx_dev->direction = direction; |
| 104 |
azx_dev->stream_tag = tag; |
| 105 |
snd_hdac_dsp_lock_init(azx_dev); |
| 106 |
list_add_tail(&azx_dev->list, &bus->stream_list); |
| 107 |
|
| 108 |
if (bus->spbcap) { |
| 109 |
azx_dev->spib_addr = bus->spbcap + AZX_SPB_BASE + |
| 110 |
AZX_SPB_INTERVAL * idx + |
| 111 |
AZX_SPB_SPIB; |
| 112 |
|
| 113 |
azx_dev->fifo_addr = bus->spbcap + AZX_SPB_BASE + |
| 114 |
AZX_SPB_INTERVAL * idx + |
| 115 |
AZX_SPB_MAXFIFO; |
| 116 |
} |
| 117 |
|
| 118 |
if (bus->drsmcap) |
| 119 |
azx_dev->dpibr_addr = bus->drsmcap + AZX_DRSM_BASE + |
| 120 |
AZX_DRSM_INTERVAL * idx; |
| 121 |
} |
| 122 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_init); |
| 123 |
|
| 124 |
/** |
| 125 |
* snd_hdac_stream_start - start a stream |
| 126 |
* @azx_dev: HD-audio core stream to start |
| 127 |
* |
| 128 |
* Start a stream, set start_wallclk and set the running flag. |
| 129 |
*/ |
| 130 |
void snd_hdac_stream_start(struct hdac_stream *azx_dev) |
| 131 |
{ |
| 132 |
struct hdac_bus *bus = azx_dev->bus; |
| 133 |
int stripe_ctl; |
| 134 |
|
| 135 |
trace_snd_hdac_stream_start(bus, azx_dev); |
| 136 |
|
| 137 |
azx_dev->start_wallclk = snd_hdac_chip_readl(bus, WALLCLK); |
| 138 |
|
| 139 |
/* enable SIE */ |
| 140 |
snd_hdac_chip_updatel(bus, INTCTL, |
| 141 |
1 << azx_dev->index, |
| 142 |
1 << azx_dev->index); |
| 143 |
/* set stripe control */ |
| 144 |
if (azx_dev->stripe) { |
| 145 |
if (azx_dev->substream) |
| 146 |
stripe_ctl = snd_hdac_get_stream_stripe_ctl(bus, azx_dev->substream); |
| 147 |
else |
| 148 |
stripe_ctl = 0; |
| 149 |
snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, |
| 150 |
stripe_ctl); |
| 151 |
} |
| 152 |
/* set DMA start and interrupt mask */ |
| 153 |
if (bus->access_sdnctl_in_dword) |
| 154 |
snd_hdac_stream_updatel(azx_dev, SD_CTL, |
| 155 |
0, SD_CTL_DMA_START | SD_INT_MASK); |
| 156 |
else |
| 157 |
snd_hdac_stream_updateb(azx_dev, SD_CTL, |
| 158 |
0, SD_CTL_DMA_START | SD_INT_MASK); |
| 159 |
azx_dev->running = true; |
| 160 |
} |
| 161 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_start); |
| 162 |
|
| 163 |
/** |
| 164 |
* snd_hdac_stream_clear - helper to clear stream registers and stop DMA transfers |
| 165 |
* @azx_dev: HD-audio core stream to stop |
| 166 |
*/ |
| 167 |
static void snd_hdac_stream_clear(struct hdac_stream *azx_dev) |
| 168 |
{ |
| 169 |
snd_hdac_stream_updateb(azx_dev, SD_CTL, |
| 170 |
SD_CTL_DMA_START | SD_INT_MASK, 0); |
| 171 |
snd_hdac_stream_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */ |
| 172 |
if (azx_dev->stripe) |
| 173 |
snd_hdac_stream_updateb(azx_dev, SD_CTL_3B, SD_CTL_STRIPE_MASK, 0); |
| 174 |
azx_dev->running = false; |
| 175 |
} |
| 176 |
|
| 177 |
/** |
| 178 |
* snd_hdac_stream_stop - stop a stream |
| 179 |
* @azx_dev: HD-audio core stream to stop |
| 180 |
* |
| 181 |
* Stop a stream DMA and disable stream interrupt |
| 182 |
*/ |
| 183 |
void snd_hdac_stream_stop(struct hdac_stream *azx_dev) |
| 184 |
{ |
| 185 |
trace_snd_hdac_stream_stop(azx_dev->bus, azx_dev); |
| 186 |
|
| 187 |
snd_hdac_stream_clear(azx_dev); |
| 188 |
/* disable SIE */ |
| 189 |
snd_hdac_chip_updatel(azx_dev->bus, INTCTL, 1 << azx_dev->index, 0); |
| 190 |
} |
| 191 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_stop); |
| 192 |
|
| 193 |
/** |
| 194 |
* snd_hdac_stop_streams - stop all streams |
| 195 |
* @bus: HD-audio core bus |
| 196 |
*/ |
| 197 |
void snd_hdac_stop_streams(struct hdac_bus *bus) |
| 198 |
{ |
| 199 |
struct hdac_stream *stream; |
| 200 |
|
| 201 |
list_for_each_entry(stream, &bus->stream_list, list) |
| 202 |
snd_hdac_stream_stop(stream); |
| 203 |
} |
| 204 |
EXPORT_SYMBOL_GPL(snd_hdac_stop_streams); |
| 205 |
|
| 206 |
/** |
| 207 |
* snd_hdac_stop_streams_and_chip - stop all streams and chip if running |
| 208 |
* @bus: HD-audio core bus |
| 209 |
*/ |
| 210 |
void snd_hdac_stop_streams_and_chip(struct hdac_bus *bus) |
| 211 |
{ |
| 212 |
|
| 213 |
if (bus->chip_init) { |
| 214 |
snd_hdac_stop_streams(bus); |
| 215 |
snd_hdac_bus_stop_chip(bus); |
| 216 |
} |
| 217 |
} |
| 218 |
EXPORT_SYMBOL_GPL(snd_hdac_stop_streams_and_chip); |
| 219 |
|
| 220 |
/** |
| 221 |
* snd_hdac_stream_reset - reset a stream |
| 222 |
* @azx_dev: HD-audio core stream to reset |
| 223 |
*/ |
| 224 |
void snd_hdac_stream_reset(struct hdac_stream *azx_dev) |
| 225 |
{ |
| 226 |
unsigned char val; |
| 227 |
int dma_run_state; |
| 228 |
|
| 229 |
snd_hdac_stream_clear(azx_dev); |
| 230 |
|
| 231 |
dma_run_state = snd_hdac_stream_readb(azx_dev, SD_CTL) & SD_CTL_DMA_START; |
| 232 |
|
| 233 |
snd_hdac_stream_updateb(azx_dev, SD_CTL, 0, SD_CTL_STREAM_RESET); |
| 234 |
|
| 235 |
/* wait for hardware to report that the stream entered reset */ |
| 236 |
snd_hdac_stream_readb_poll(azx_dev, SD_CTL, val, (val & SD_CTL_STREAM_RESET), 3, 300); |
| 237 |
|
| 238 |
if (azx_dev->bus->dma_stop_delay && dma_run_state) |
| 239 |
udelay(azx_dev->bus->dma_stop_delay); |
| 240 |
|
| 241 |
snd_hdac_stream_updateb(azx_dev, SD_CTL, SD_CTL_STREAM_RESET, 0); |
| 242 |
|
| 243 |
/* wait for hardware to report that the stream is out of reset */ |
| 244 |
snd_hdac_stream_readb_poll(azx_dev, SD_CTL, val, !(val & SD_CTL_STREAM_RESET), 3, 300); |
| 245 |
|
| 246 |
/* reset first position - may not be synced with hw at this time */ |
| 247 |
if (azx_dev->posbuf) |
| 248 |
*azx_dev->posbuf = 0; |
| 249 |
} |
| 250 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_reset); |
| 251 |
|
| 252 |
/** |
| 253 |
* snd_hdac_stream_setup - set up the SD for streaming |
| 254 |
* @azx_dev: HD-audio core stream to set up |
| 255 |
* @code_loading: Whether the stream is for PCM or code-loading. |
| 256 |
*/ |
| 257 |
int snd_hdac_stream_setup(struct hdac_stream *azx_dev, bool code_loading) |
| 258 |
{ |
| 259 |
struct hdac_bus *bus = azx_dev->bus; |
| 260 |
struct snd_pcm_runtime *runtime; |
| 261 |
unsigned int val; |
| 262 |
u16 reg; |
| 263 |
int ret; |
| 264 |
|
| 265 |
if (azx_dev->substream) |
| 266 |
runtime = azx_dev->substream->runtime; |
| 267 |
else |
| 268 |
runtime = NULL; |
| 269 |
/* make sure the run bit is zero for SD */ |
| 270 |
snd_hdac_stream_clear(azx_dev); |
| 271 |
/* program the stream_tag */ |
| 272 |
val = snd_hdac_stream_readl(azx_dev, SD_CTL); |
| 273 |
val = (val & ~SD_CTL_STREAM_TAG_MASK) | |
| 274 |
(azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT); |
| 275 |
if (!bus->snoop) |
| 276 |
val |= SD_CTL_TRAFFIC_PRIO; |
| 277 |
snd_hdac_stream_writel(azx_dev, SD_CTL, val); |
| 278 |
|
| 279 |
/* program the length of samples in cyclic buffer */ |
| 280 |
snd_hdac_stream_writel(azx_dev, SD_CBL, azx_dev->bufsize); |
| 281 |
|
| 282 |
/* program the stream format */ |
| 283 |
/* this value needs to be the same as the one programmed */ |
| 284 |
snd_hdac_stream_writew(azx_dev, SD_FORMAT, azx_dev->format_val); |
| 285 |
|
| 286 |
/* program the stream LVI (last valid index) of the BDL */ |
| 287 |
snd_hdac_stream_writew(azx_dev, SD_LVI, azx_dev->frags - 1); |
| 288 |
|
| 289 |
/* program the BDL address */ |
| 290 |
/* lower BDL address */ |
| 291 |
snd_hdac_stream_writel(azx_dev, SD_BDLPL, (u32)(azx_dev->bdl.addr + bus->addr_offset)); |
| 292 |
/* upper BDL address */ |
| 293 |
snd_hdac_stream_writel(azx_dev, SD_BDLPU, |
| 294 |
upper_32_bits(azx_dev->bdl.addr + bus->addr_offset)); |
| 295 |
|
| 296 |
/* enable the position buffer */ |
| 297 |
if (bus->use_posbuf && bus->posbuf.addr) { |
| 298 |
if (!(snd_hdac_chip_readl(bus, DPLBASE) & AZX_DPLBASE_ENABLE)) |
| 299 |
snd_hdac_chip_writel(bus, DPLBASE, |
| 300 |
(u32)(bus->posbuf.addr + bus->addr_offset) | AZX_DPLBASE_ENABLE); |
| 301 |
} |
| 302 |
|
| 303 |
/* set the interrupt enable bits in the descriptor control register */ |
| 304 |
snd_hdac_stream_updatel(azx_dev, SD_CTL, 0, SD_INT_MASK); |
| 305 |
|
| 306 |
if (!code_loading) { |
| 307 |
/* Once SDxFMT is set, the controller programs SDxFIFOS to non-zero value. */ |
| 308 |
ret = snd_hdac_stream_readw_poll(azx_dev, SD_FIFOSIZE, reg, |
| 309 |
reg & AZX_SD_FIFOSIZE_MASK, 3, 300); |
| 310 |
if (ret) |
| 311 |
dev_dbg(bus->dev, "polling SD_FIFOSIZE 0x%04x failed: %d\n", |
| 312 |
AZX_REG_SD_FIFOSIZE, ret); |
| 313 |
azx_dev->fifo_size = reg; |
| 314 |
} |
| 315 |
|
| 316 |
/* when LPIB delay correction gives a small negative value, |
| 317 |
* we ignore it; currently set the threshold statically to |
| 318 |
* 64 frames |
| 319 |
*/ |
| 320 |
if (runtime && runtime->period_size > 64) |
| 321 |
azx_dev->delay_negative_threshold = |
| 322 |
-frames_to_bytes(runtime, 64); |
| 323 |
else |
| 324 |
azx_dev->delay_negative_threshold = 0; |
| 325 |
|
| 326 |
/* wallclk has 24Mhz clock source */ |
| 327 |
if (runtime) |
| 328 |
azx_dev->period_wallclk = (((runtime->period_size * 24000) / |
| 329 |
runtime->rate) * 1000); |
| 330 |
|
| 331 |
return 0; |
| 332 |
} |
| 333 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_setup); |
| 334 |
|
| 335 |
/** |
| 336 |
* snd_hdac_stream_cleanup - cleanup a stream |
| 337 |
* @azx_dev: HD-audio core stream to clean up |
| 338 |
*/ |
| 339 |
void snd_hdac_stream_cleanup(struct hdac_stream *azx_dev) |
| 340 |
{ |
| 341 |
snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); |
| 342 |
snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); |
| 343 |
snd_hdac_stream_writel(azx_dev, SD_CTL, 0); |
| 344 |
azx_dev->bufsize = 0; |
| 345 |
azx_dev->period_bytes = 0; |
| 346 |
azx_dev->format_val = 0; |
| 347 |
} |
| 348 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_cleanup); |
| 349 |
|
| 350 |
/** |
| 351 |
* snd_hdac_stream_assign - assign a stream for the PCM |
| 352 |
* @bus: HD-audio core bus |
| 353 |
* @substream: PCM substream to assign |
| 354 |
* |
| 355 |
* Look for an unused stream for the given PCM substream, assign it |
| 356 |
* and return the stream object. If no stream is free, returns NULL. |
| 357 |
* The function tries to keep using the same stream object when it's used |
| 358 |
* beforehand. Also, when bus->reverse_assign flag is set, the last free |
| 359 |
* or matching entry is returned. This is needed for some strange codecs. |
| 360 |
*/ |
| 361 |
struct hdac_stream *snd_hdac_stream_assign(struct hdac_bus *bus, |
| 362 |
struct snd_pcm_substream *substream) |
| 363 |
{ |
| 364 |
struct hdac_stream *azx_dev; |
| 365 |
struct hdac_stream *res = NULL; |
| 366 |
|
| 367 |
/* make a non-zero unique key for the substream */ |
| 368 |
int key = (substream->number << 2) | (substream->stream + 1); |
| 369 |
|
| 370 |
if (substream->pcm) |
| 371 |
key |= (substream->pcm->device << 16); |
| 372 |
|
| 373 |
guard(spinlock_irq)(&bus->reg_lock); |
| 374 |
list_for_each_entry(azx_dev, &bus->stream_list, list) { |
| 375 |
if (azx_dev->direction != substream->stream) |
| 376 |
continue; |
| 377 |
if (azx_dev->opened) |
| 378 |
continue; |
| 379 |
if (azx_dev->assigned_key == key) { |
| 380 |
res = azx_dev; |
| 381 |
break; |
| 382 |
} |
| 383 |
if (!res || bus->reverse_assign) |
| 384 |
res = azx_dev; |
| 385 |
} |
| 386 |
if (res) { |
| 387 |
res->opened = 1; |
| 388 |
res->running = 0; |
| 389 |
res->assigned_key = key; |
| 390 |
res->substream = substream; |
| 391 |
} |
| 392 |
return res; |
| 393 |
} |
| 394 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_assign); |
| 395 |
|
| 396 |
/** |
| 397 |
* snd_hdac_stream_release_locked - release the assigned stream |
| 398 |
* @azx_dev: HD-audio core stream to release |
| 399 |
* |
| 400 |
* Release the stream that has been assigned by snd_hdac_stream_assign(). |
| 401 |
* The bus->reg_lock needs to be taken at a higher level |
| 402 |
*/ |
| 403 |
void snd_hdac_stream_release_locked(struct hdac_stream *azx_dev) |
| 404 |
{ |
| 405 |
azx_dev->opened = 0; |
| 406 |
azx_dev->running = 0; |
| 407 |
azx_dev->substream = NULL; |
| 408 |
} |
| 409 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_release_locked); |
| 410 |
|
| 411 |
/** |
| 412 |
* snd_hdac_stream_release - release the assigned stream |
| 413 |
* @azx_dev: HD-audio core stream to release |
| 414 |
* |
| 415 |
* Release the stream that has been assigned by snd_hdac_stream_assign(). |
| 416 |
*/ |
| 417 |
void snd_hdac_stream_release(struct hdac_stream *azx_dev) |
| 418 |
{ |
| 419 |
struct hdac_bus *bus = azx_dev->bus; |
| 420 |
|
| 421 |
guard(spinlock_irq)(&bus->reg_lock); |
| 422 |
snd_hdac_stream_release_locked(azx_dev); |
| 423 |
} |
| 424 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_release); |
| 425 |
|
| 426 |
/** |
| 427 |
* snd_hdac_get_stream - return hdac_stream based on stream_tag and |
| 428 |
* direction |
| 429 |
* |
| 430 |
* @bus: HD-audio core bus |
| 431 |
* @dir: direction for the stream to be found |
| 432 |
* @stream_tag: stream tag for stream to be found |
| 433 |
*/ |
| 434 |
struct hdac_stream *snd_hdac_get_stream(struct hdac_bus *bus, |
| 435 |
int dir, int stream_tag) |
| 436 |
{ |
| 437 |
struct hdac_stream *s; |
| 438 |
|
| 439 |
list_for_each_entry(s, &bus->stream_list, list) { |
| 440 |
if (s->direction == dir && s->stream_tag == stream_tag) |
| 441 |
return s; |
| 442 |
} |
| 443 |
|
| 444 |
return NULL; |
| 445 |
} |
| 446 |
EXPORT_SYMBOL_GPL(snd_hdac_get_stream); |
| 447 |
|
| 448 |
/* |
| 449 |
* set up a BDL entry |
| 450 |
*/ |
| 451 |
static int setup_bdle(struct hdac_bus *bus, |
| 452 |
struct snd_dma_buffer *dmab, |
| 453 |
struct hdac_stream *azx_dev, __le32 **bdlp, |
| 454 |
int ofs, int size, int with_ioc) |
| 455 |
{ |
| 456 |
__le32 *bdl = *bdlp; |
| 457 |
|
| 458 |
while (size > 0) { |
| 459 |
dma_addr_t addr; |
| 460 |
int chunk; |
| 461 |
|
| 462 |
if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES) |
| 463 |
return -EINVAL; |
| 464 |
|
| 465 |
addr = snd_sgbuf_get_addr(dmab, ofs); |
| 466 |
/* program the address field of the BDL entry */ |
| 467 |
bdl[0] = cpu_to_le32((u32)(addr + bus->addr_offset)); |
| 468 |
bdl[1] = cpu_to_le32(upper_32_bits(addr + bus->addr_offset)); |
| 469 |
/* program the size field of the BDL entry */ |
| 470 |
chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size); |
| 471 |
/* one BDLE cannot cross 4K boundary on CTHDA chips */ |
| 472 |
if (bus->align_bdle_4k) { |
| 473 |
u32 remain = 0x1000 - (ofs & 0xfff); |
| 474 |
|
| 475 |
if (chunk > remain) |
| 476 |
chunk = remain; |
| 477 |
} |
| 478 |
bdl[2] = cpu_to_le32(chunk); |
| 479 |
/* program the IOC to enable interrupt |
| 480 |
* only when the whole fragment is processed |
| 481 |
*/ |
| 482 |
size -= chunk; |
| 483 |
bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01); |
| 484 |
bdl += 4; |
| 485 |
azx_dev->frags++; |
| 486 |
ofs += chunk; |
| 487 |
} |
| 488 |
*bdlp = bdl; |
| 489 |
return ofs; |
| 490 |
} |
| 491 |
|
| 492 |
/** |
| 493 |
* snd_hdac_stream_setup_bdle - set up BDL entries |
| 494 |
* @azx_dev: HD-audio core stream to set up |
| 495 |
* @dmab: allocated DMA buffer |
| 496 |
* @runtime: substream runtime, optional |
| 497 |
* |
| 498 |
* Set up the buffer descriptor table of the given stream based on the |
| 499 |
* period and buffer sizes of the assigned PCM substream. |
| 500 |
*/ |
| 501 |
static int snd_hdac_stream_setup_bdle(struct hdac_stream *azx_dev, struct snd_dma_buffer *dmab, |
| 502 |
struct snd_pcm_runtime *runtime) |
| 503 |
{ |
| 504 |
struct hdac_bus *bus = azx_dev->bus; |
| 505 |
int i, ofs, periods, period_bytes; |
| 506 |
int pos_adj, pos_align; |
| 507 |
__le32 *bdl; |
| 508 |
|
| 509 |
/* reset BDL address */ |
| 510 |
snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); |
| 511 |
snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); |
| 512 |
|
| 513 |
period_bytes = azx_dev->period_bytes; |
| 514 |
periods = azx_dev->bufsize / period_bytes; |
| 515 |
|
| 516 |
/* program the initial BDL entries */ |
| 517 |
bdl = (__le32 *)azx_dev->bdl.area; |
| 518 |
ofs = 0; |
| 519 |
azx_dev->frags = 0; |
| 520 |
|
| 521 |
pos_adj = bus->bdl_pos_adj; |
| 522 |
if (runtime && !azx_dev->no_period_wakeup && pos_adj > 0) { |
| 523 |
pos_align = pos_adj; |
| 524 |
pos_adj = DIV_ROUND_UP(pos_adj * runtime->rate, 48000); |
| 525 |
if (!pos_adj) |
| 526 |
pos_adj = pos_align; |
| 527 |
else |
| 528 |
pos_adj = roundup(pos_adj, pos_align); |
| 529 |
pos_adj = frames_to_bytes(runtime, pos_adj); |
| 530 |
if (pos_adj >= period_bytes) { |
| 531 |
dev_warn(bus->dev, "Too big adjustment %d\n", |
| 532 |
pos_adj); |
| 533 |
pos_adj = 0; |
| 534 |
} else { |
| 535 |
ofs = setup_bdle(bus, dmab, azx_dev, |
| 536 |
&bdl, ofs, pos_adj, true); |
| 537 |
if (ofs < 0) |
| 538 |
goto error; |
| 539 |
} |
| 540 |
} else |
| 541 |
pos_adj = 0; |
| 542 |
|
| 543 |
for (i = 0; i < periods; i++) { |
| 544 |
if (i == periods - 1 && pos_adj) |
| 545 |
ofs = setup_bdle(bus, dmab, azx_dev, |
| 546 |
&bdl, ofs, period_bytes - pos_adj, 0); |
| 547 |
else |
| 548 |
ofs = setup_bdle(bus, dmab, azx_dev, |
| 549 |
&bdl, ofs, period_bytes, |
| 550 |
!azx_dev->no_period_wakeup); |
| 551 |
if (ofs < 0) |
| 552 |
goto error; |
| 553 |
} |
| 554 |
return 0; |
| 555 |
|
| 556 |
error: |
| 557 |
dev_dbg(bus->dev, "Too many BDL entries: buffer=%d, period=%d\n", |
| 558 |
azx_dev->bufsize, period_bytes); |
| 559 |
return -EINVAL; |
| 560 |
} |
| 561 |
|
| 562 |
/** |
| 563 |
* snd_hdac_stream_setup_periods - set up BDL entries |
| 564 |
* @azx_dev: HD-audio core stream to set up |
| 565 |
* |
| 566 |
* Set up the buffer descriptor table of the given stream based on the |
| 567 |
* period and buffer sizes of the assigned PCM substream. |
| 568 |
*/ |
| 569 |
int snd_hdac_stream_setup_periods(struct hdac_stream *azx_dev) |
| 570 |
{ |
| 571 |
struct snd_pcm_substream *substream = azx_dev->substream; |
| 572 |
struct snd_compr_stream *cstream = azx_dev->cstream; |
| 573 |
struct snd_pcm_runtime *runtime = NULL; |
| 574 |
struct snd_dma_buffer *dmab; |
| 575 |
|
| 576 |
if (substream) { |
| 577 |
runtime = substream->runtime; |
| 578 |
dmab = snd_pcm_get_dma_buf(substream); |
| 579 |
} else if (cstream) { |
| 580 |
dmab = snd_pcm_get_dma_buf(cstream); |
| 581 |
} else { |
| 582 |
WARN(1, "No substream or cstream assigned\n"); |
| 583 |
return -EINVAL; |
| 584 |
} |
| 585 |
|
| 586 |
return snd_hdac_stream_setup_bdle(azx_dev, dmab, runtime); |
| 587 |
} |
| 588 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_setup_periods); |
| 589 |
|
| 590 |
/** |
| 591 |
* snd_hdac_stream_set_params - set stream parameters |
| 592 |
* @azx_dev: HD-audio core stream for which parameters are to be set |
| 593 |
* @format_val: format value parameter |
| 594 |
* |
| 595 |
* Setup the HD-audio core stream parameters from substream of the stream |
| 596 |
* and passed format value |
| 597 |
*/ |
| 598 |
int snd_hdac_stream_set_params(struct hdac_stream *azx_dev, |
| 599 |
unsigned int format_val) |
| 600 |
{ |
| 601 |
struct snd_pcm_substream *substream = azx_dev->substream; |
| 602 |
struct snd_compr_stream *cstream = azx_dev->cstream; |
| 603 |
unsigned int bufsize, period_bytes; |
| 604 |
unsigned int no_period_wakeup; |
| 605 |
int err; |
| 606 |
|
| 607 |
if (substream) { |
| 608 |
bufsize = snd_pcm_lib_buffer_bytes(substream); |
| 609 |
period_bytes = snd_pcm_lib_period_bytes(substream); |
| 610 |
no_period_wakeup = substream->runtime->no_period_wakeup; |
| 611 |
} else if (cstream) { |
| 612 |
bufsize = cstream->runtime->buffer_size; |
| 613 |
period_bytes = cstream->runtime->fragment_size; |
| 614 |
no_period_wakeup = 0; |
| 615 |
} else { |
| 616 |
return -EINVAL; |
| 617 |
} |
| 618 |
|
| 619 |
if (bufsize != azx_dev->bufsize || |
| 620 |
period_bytes != azx_dev->period_bytes || |
| 621 |
format_val != azx_dev->format_val || |
| 622 |
no_period_wakeup != azx_dev->no_period_wakeup) { |
| 623 |
azx_dev->bufsize = bufsize; |
| 624 |
azx_dev->period_bytes = period_bytes; |
| 625 |
azx_dev->format_val = format_val; |
| 626 |
azx_dev->no_period_wakeup = no_period_wakeup; |
| 627 |
err = snd_hdac_stream_setup_periods(azx_dev); |
| 628 |
if (err < 0) |
| 629 |
return err; |
| 630 |
} |
| 631 |
return 0; |
| 632 |
} |
| 633 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_set_params); |
| 634 |
|
| 635 |
static u64 azx_cc_read(struct cyclecounter *cc) |
| 636 |
{ |
| 637 |
struct hdac_stream *azx_dev = container_of(cc, struct hdac_stream, cc); |
| 638 |
|
| 639 |
return snd_hdac_chip_readl(azx_dev->bus, WALLCLK); |
| 640 |
} |
| 641 |
|
| 642 |
static void azx_timecounter_init(struct hdac_stream *azx_dev, |
| 643 |
bool force, u64 last) |
| 644 |
{ |
| 645 |
struct timecounter *tc = &azx_dev->tc; |
| 646 |
struct cyclecounter *cc = &azx_dev->cc; |
| 647 |
u64 nsec; |
| 648 |
|
| 649 |
cc->read = azx_cc_read; |
| 650 |
cc->mask = CLOCKSOURCE_MASK(32); |
| 651 |
|
| 652 |
/* |
| 653 |
* Calculate the optimal mult/shift values. The counter wraps |
| 654 |
* around after ~178.9 seconds. |
| 655 |
*/ |
| 656 |
clocks_calc_mult_shift(&cc->mult, &cc->shift, 24000000, |
| 657 |
NSEC_PER_SEC, 178); |
| 658 |
|
| 659 |
nsec = 0; /* audio time is elapsed time since trigger */ |
| 660 |
timecounter_init(tc, cc, nsec); |
| 661 |
if (force) { |
| 662 |
/* |
| 663 |
* force timecounter to use predefined value, |
| 664 |
* used for synchronized starts |
| 665 |
*/ |
| 666 |
tc->cycle_last = last; |
| 667 |
} |
| 668 |
} |
| 669 |
|
| 670 |
/** |
| 671 |
* snd_hdac_stream_timecounter_init - initialize time counter |
| 672 |
* @azx_dev: HD-audio core stream (master stream) |
| 673 |
* @streams: bit flags of streams to set up |
| 674 |
* @start: true for PCM trigger start, false for other cases |
| 675 |
* |
| 676 |
* Initializes the time counter of streams marked by the bit flags (each |
| 677 |
* bit corresponds to the stream index). |
| 678 |
* The trigger timestamp of PCM substream assigned to the given stream is |
| 679 |
* updated accordingly, too. |
| 680 |
*/ |
| 681 |
void snd_hdac_stream_timecounter_init(struct hdac_stream *azx_dev, |
| 682 |
unsigned int streams, bool start) |
| 683 |
{ |
| 684 |
struct hdac_bus *bus = azx_dev->bus; |
| 685 |
struct snd_pcm_runtime *runtime = azx_dev->substream->runtime; |
| 686 |
struct hdac_stream *s; |
| 687 |
bool inited = false; |
| 688 |
u64 cycle_last = 0; |
| 689 |
|
| 690 |
if (!start) |
| 691 |
goto skip; |
| 692 |
|
| 693 |
list_for_each_entry(s, &bus->stream_list, list) { |
| 694 |
if ((streams & (1 << s->index))) { |
| 695 |
azx_timecounter_init(s, inited, cycle_last); |
| 696 |
if (!inited) { |
| 697 |
inited = true; |
| 698 |
cycle_last = s->tc.cycle_last; |
| 699 |
} |
| 700 |
} |
| 701 |
} |
| 702 |
|
| 703 |
skip: |
| 704 |
snd_pcm_gettime(runtime, &runtime->trigger_tstamp); |
| 705 |
runtime->trigger_tstamp_latched = true; |
| 706 |
} |
| 707 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_timecounter_init); |
| 708 |
|
| 709 |
/** |
| 710 |
* snd_hdac_stream_sync_trigger - turn on/off stream sync register |
| 711 |
* @azx_dev: HD-audio core stream (master stream) |
| 712 |
* @set: true = set, false = clear |
| 713 |
* @streams: bit flags of streams to sync |
| 714 |
* @reg: the stream sync register address |
| 715 |
*/ |
| 716 |
void snd_hdac_stream_sync_trigger(struct hdac_stream *azx_dev, bool set, |
| 717 |
unsigned int streams, unsigned int reg) |
| 718 |
{ |
| 719 |
struct hdac_bus *bus = azx_dev->bus; |
| 720 |
unsigned int val; |
| 721 |
|
| 722 |
if (!reg) |
| 723 |
reg = AZX_REG_SSYNC; |
| 724 |
val = _snd_hdac_chip_readl(bus, reg); |
| 725 |
if (set) |
| 726 |
val |= streams; |
| 727 |
else |
| 728 |
val &= ~streams; |
| 729 |
_snd_hdac_chip_writel(bus, reg, val); |
| 730 |
} |
| 731 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_sync_trigger); |
| 732 |
|
| 733 |
/** |
| 734 |
* snd_hdac_stream_sync - sync with start/stop trigger operation |
| 735 |
* @azx_dev: HD-audio core stream (master stream) |
| 736 |
* @start: true = start, false = stop |
| 737 |
* @streams: bit flags of streams to sync |
| 738 |
* |
| 739 |
* For @start = true, wait until all FIFOs get ready. |
| 740 |
* For @start = false, wait until all RUN bits are cleared. |
| 741 |
*/ |
| 742 |
void snd_hdac_stream_sync(struct hdac_stream *azx_dev, bool start, |
| 743 |
unsigned int streams) |
| 744 |
{ |
| 745 |
struct hdac_bus *bus = azx_dev->bus; |
| 746 |
int nwait, timeout; |
| 747 |
struct hdac_stream *s; |
| 748 |
|
| 749 |
for (timeout = 5000; timeout; timeout--) { |
| 750 |
nwait = 0; |
| 751 |
list_for_each_entry(s, &bus->stream_list, list) { |
| 752 |
if (!(streams & (1 << s->index))) |
| 753 |
continue; |
| 754 |
|
| 755 |
if (start) { |
| 756 |
/* check FIFO gets ready */ |
| 757 |
if (!(snd_hdac_stream_readb(s, SD_STS) & |
| 758 |
SD_STS_FIFO_READY)) |
| 759 |
nwait++; |
| 760 |
} else { |
| 761 |
/* check RUN bit is cleared */ |
| 762 |
if (snd_hdac_stream_readb(s, SD_CTL) & |
| 763 |
SD_CTL_DMA_START) { |
| 764 |
nwait++; |
| 765 |
/* |
| 766 |
* Perform stream reset if DMA RUN |
| 767 |
* bit not cleared within given timeout |
| 768 |
*/ |
| 769 |
if (timeout == 1) |
| 770 |
snd_hdac_stream_reset(s); |
| 771 |
} |
| 772 |
} |
| 773 |
} |
| 774 |
if (!nwait) |
| 775 |
break; |
| 776 |
cpu_relax(); |
| 777 |
} |
| 778 |
} |
| 779 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_sync); |
| 780 |
|
| 781 |
/** |
| 782 |
* snd_hdac_stream_spbcap_enable - enable SPIB for a stream |
| 783 |
* @bus: HD-audio core bus |
| 784 |
* @enable: flag to enable/disable SPIB |
| 785 |
* @index: stream index for which SPIB need to be enabled |
| 786 |
*/ |
| 787 |
void snd_hdac_stream_spbcap_enable(struct hdac_bus *bus, |
| 788 |
bool enable, int index) |
| 789 |
{ |
| 790 |
u32 mask = 0; |
| 791 |
|
| 792 |
if (!bus->spbcap) { |
| 793 |
dev_err(bus->dev, "Address of SPB capability is NULL\n"); |
| 794 |
return; |
| 795 |
} |
| 796 |
|
| 797 |
mask |= (1 << index); |
| 798 |
|
| 799 |
if (enable) |
| 800 |
snd_hdac_updatel(bus->spbcap, AZX_REG_SPB_SPBFCCTL, mask, mask); |
| 801 |
else |
| 802 |
snd_hdac_updatel(bus->spbcap, AZX_REG_SPB_SPBFCCTL, mask, 0); |
| 803 |
} |
| 804 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_spbcap_enable); |
| 805 |
|
| 806 |
/** |
| 807 |
* snd_hdac_stream_set_spib - sets the spib value of a stream |
| 808 |
* @bus: HD-audio core bus |
| 809 |
* @azx_dev: hdac_stream |
| 810 |
* @value: spib value to set |
| 811 |
*/ |
| 812 |
int snd_hdac_stream_set_spib(struct hdac_bus *bus, |
| 813 |
struct hdac_stream *azx_dev, u32 value) |
| 814 |
{ |
| 815 |
if (!bus->spbcap) { |
| 816 |
dev_err(bus->dev, "Address of SPB capability is NULL\n"); |
| 817 |
return -EINVAL; |
| 818 |
} |
| 819 |
|
| 820 |
writel(value, azx_dev->spib_addr); |
| 821 |
|
| 822 |
return 0; |
| 823 |
} |
| 824 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_set_spib); |
| 825 |
|
| 826 |
/** |
| 827 |
* snd_hdac_stream_drsm_enable - enable DMA resume for a stream |
| 828 |
* @bus: HD-audio core bus |
| 829 |
* @enable: flag to enable/disable DRSM |
| 830 |
* @index: stream index for which DRSM need to be enabled |
| 831 |
*/ |
| 832 |
void snd_hdac_stream_drsm_enable(struct hdac_bus *bus, |
| 833 |
bool enable, int index) |
| 834 |
{ |
| 835 |
u32 mask = 0; |
| 836 |
|
| 837 |
if (!bus->drsmcap) { |
| 838 |
dev_err(bus->dev, "Address of DRSM capability is NULL\n"); |
| 839 |
return; |
| 840 |
} |
| 841 |
|
| 842 |
mask |= (1 << index); |
| 843 |
|
| 844 |
if (enable) |
| 845 |
snd_hdac_updatel(bus->drsmcap, AZX_REG_DRSM_CTL, mask, mask); |
| 846 |
else |
| 847 |
snd_hdac_updatel(bus->drsmcap, AZX_REG_DRSM_CTL, mask, 0); |
| 848 |
} |
| 849 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_drsm_enable); |
| 850 |
|
| 851 |
/* |
| 852 |
* snd_hdac_stream_wait_drsm - wait for HW to clear RSM for a stream |
| 853 |
* @azx_dev: HD-audio core stream to await RSM for |
| 854 |
* |
| 855 |
* Returns 0 on success and -ETIMEDOUT upon a timeout. |
| 856 |
*/ |
| 857 |
int snd_hdac_stream_wait_drsm(struct hdac_stream *azx_dev) |
| 858 |
{ |
| 859 |
struct hdac_bus *bus = azx_dev->bus; |
| 860 |
u32 mask, reg; |
| 861 |
int ret; |
| 862 |
|
| 863 |
mask = 1 << azx_dev->index; |
| 864 |
|
| 865 |
ret = read_poll_timeout(snd_hdac_reg_readl, reg, !(reg & mask), 250, 2000, false, bus, |
| 866 |
bus->drsmcap + AZX_REG_DRSM_CTL); |
| 867 |
if (ret) |
| 868 |
dev_dbg(bus->dev, "polling RSM 0x%08x failed: %d\n", mask, ret); |
| 869 |
return ret; |
| 870 |
} |
| 871 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_wait_drsm); |
| 872 |
|
| 873 |
/** |
| 874 |
* snd_hdac_stream_set_dpibr - sets the dpibr value of a stream |
| 875 |
* @bus: HD-audio core bus |
| 876 |
* @azx_dev: hdac_stream |
| 877 |
* @value: dpib value to set |
| 878 |
*/ |
| 879 |
int snd_hdac_stream_set_dpibr(struct hdac_bus *bus, |
| 880 |
struct hdac_stream *azx_dev, u32 value) |
| 881 |
{ |
| 882 |
if (!bus->drsmcap) { |
| 883 |
dev_err(bus->dev, "Address of DRSM capability is NULL\n"); |
| 884 |
return -EINVAL; |
| 885 |
} |
| 886 |
|
| 887 |
writel(value, azx_dev->dpibr_addr); |
| 888 |
|
| 889 |
return 0; |
| 890 |
} |
| 891 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_set_dpibr); |
| 892 |
|
| 893 |
/** |
| 894 |
* snd_hdac_stream_set_lpib - sets the lpib value of a stream |
| 895 |
* @azx_dev: hdac_stream |
| 896 |
* @value: lpib value to set |
| 897 |
*/ |
| 898 |
int snd_hdac_stream_set_lpib(struct hdac_stream *azx_dev, u32 value) |
| 899 |
{ |
| 900 |
snd_hdac_stream_writel(azx_dev, SD_LPIB, value); |
| 901 |
|
| 902 |
return 0; |
| 903 |
} |
| 904 |
EXPORT_SYMBOL_GPL(snd_hdac_stream_set_lpib); |
| 905 |
|
| 906 |
#ifdef CONFIG_SND_HDA_DSP_LOADER |
| 907 |
/** |
| 908 |
* snd_hdac_dsp_prepare - prepare for DSP loading |
| 909 |
* @azx_dev: HD-audio core stream used for DSP loading |
| 910 |
* @format: HD-audio stream format |
| 911 |
* @byte_size: data chunk byte size |
| 912 |
* @bufp: allocated buffer |
| 913 |
* |
| 914 |
* Allocate the buffer for the given size and set up the given stream for |
| 915 |
* DSP loading. Returns the stream tag (>= 0), or a negative error code. |
| 916 |
*/ |
| 917 |
int snd_hdac_dsp_prepare(struct hdac_stream *azx_dev, unsigned int format, |
| 918 |
unsigned int byte_size, struct snd_dma_buffer *bufp) |
| 919 |
{ |
| 920 |
struct hdac_bus *bus = azx_dev->bus; |
| 921 |
int err; |
| 922 |
|
| 923 |
guard(snd_hdac_dsp_lock)(azx_dev); |
| 924 |
scoped_guard(spinlock_irq, &bus->reg_lock) { |
| 925 |
if (azx_dev->running || azx_dev->locked) |
| 926 |
return -EBUSY; |
| 927 |
azx_dev->locked = true; |
| 928 |
} |
| 929 |
|
| 930 |
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG, bus->dev, |
| 931 |
byte_size, bufp); |
| 932 |
if (err < 0) |
| 933 |
goto err_alloc; |
| 934 |
|
| 935 |
azx_dev->substream = NULL; |
| 936 |
azx_dev->bufsize = byte_size; |
| 937 |
/* It is recommended to transfer the firmware in two or more chunks. */ |
| 938 |
azx_dev->period_bytes = byte_size / 2; |
| 939 |
azx_dev->format_val = format; |
| 940 |
azx_dev->no_period_wakeup = 1; |
| 941 |
|
| 942 |
snd_hdac_stream_reset(azx_dev); |
| 943 |
|
| 944 |
err = snd_hdac_stream_setup_bdle(azx_dev, bufp, NULL); |
| 945 |
if (err < 0) |
| 946 |
goto error; |
| 947 |
|
| 948 |
snd_hdac_stream_setup(azx_dev, true); |
| 949 |
return azx_dev->stream_tag; |
| 950 |
|
| 951 |
error: |
| 952 |
snd_dma_free_pages(bufp); |
| 953 |
err_alloc: |
| 954 |
scoped_guard(spinlock_irq, &bus->reg_lock) { |
| 955 |
azx_dev->locked = false; |
| 956 |
} |
| 957 |
return err; |
| 958 |
} |
| 959 |
EXPORT_SYMBOL_GPL(snd_hdac_dsp_prepare); |
| 960 |
|
| 961 |
/** |
| 962 |
* snd_hdac_dsp_trigger - start / stop DSP loading |
| 963 |
* @azx_dev: HD-audio core stream used for DSP loading |
| 964 |
* @start: trigger start or stop |
| 965 |
*/ |
| 966 |
void snd_hdac_dsp_trigger(struct hdac_stream *azx_dev, bool start) |
| 967 |
{ |
| 968 |
if (start) |
| 969 |
snd_hdac_stream_start(azx_dev); |
| 970 |
else |
| 971 |
snd_hdac_stream_stop(azx_dev); |
| 972 |
} |
| 973 |
EXPORT_SYMBOL_GPL(snd_hdac_dsp_trigger); |
| 974 |
|
| 975 |
/** |
| 976 |
* snd_hdac_dsp_cleanup - clean up the stream from DSP loading to normal |
| 977 |
* @azx_dev: HD-audio core stream used for DSP loading |
| 978 |
* @dmab: buffer used by DSP loading |
| 979 |
*/ |
| 980 |
void snd_hdac_dsp_cleanup(struct hdac_stream *azx_dev, |
| 981 |
struct snd_dma_buffer *dmab) |
| 982 |
{ |
| 983 |
struct hdac_bus *bus = azx_dev->bus; |
| 984 |
|
| 985 |
if (!dmab->area || !azx_dev->locked) |
| 986 |
return; |
| 987 |
|
| 988 |
guard(snd_hdac_dsp_lock)(azx_dev); |
| 989 |
/* reset BDL address */ |
| 990 |
snd_hdac_stream_writel(azx_dev, SD_BDLPL, 0); |
| 991 |
snd_hdac_stream_writel(azx_dev, SD_BDLPU, 0); |
| 992 |
snd_hdac_stream_writel(azx_dev, SD_CTL, 0); |
| 993 |
azx_dev->bufsize = 0; |
| 994 |
azx_dev->period_bytes = 0; |
| 995 |
azx_dev->format_val = 0; |
| 996 |
|
| 997 |
snd_dma_free_pages(dmab); |
| 998 |
dmab->area = NULL; |
| 999 |
|
| 1000 |
guard(spinlock_irq)(&bus->reg_lock); |
| 1001 |
azx_dev->locked = false; |
| 1002 |
} |
| 1003 |
EXPORT_SYMBOL_GPL(snd_hdac_dsp_cleanup); |
| 1004 |
#endif /* CONFIG_SND_HDA_DSP_LOADER */ |